LG WD1208TC4W Owner’s Manual

www.lg.com

OWNER'S MANUAL

WASHING

MACHINE

Before beginning installation, read these instructions carefully. This

will simplify installation and ensure that the product is installed

correctly and safely. Leave these instructions near the product after

installation for future reference.

MFL62693496

Rev.01_102918

EN ENGLISH

WD1208TC4W

TABLE OF CONTENTS

This manual may contain images or

content different from the model you

purchased.

This manual is subject to revision by the

manufacturer.

SAFETY INSTRUCTIONS .................................................................3

IMPORTANT SAFETY INSTRUCTIONS .................................................................3

Disposal of Your Old Appliance ...............................................................................8

INSTALLATION ..................................................................................9

Parts ........................................................................................................................9

Accessories .............................................................................................................9

Specifications ........................................................................................................10

Installation Place Requirements ............................................................................ 11

Unpacking and Removing Transit Bolts .................................................................12

Using Anti-Slip Sheets (Optional) ..........................................................................13

Wooden Floors (Suspended Floors) ......................................................................13

Leveling the Appliance ........................................................................................... 14

Connecting the Water Supply Hose.......................................................................14

Installing the Drain Hose .......................................................................................17

OPERATION .....................................................................................18

Using the Washing Machine ..................................................................................18

Sorting Laundry .....................................................................................................19

Adding Cleaning Products .....................................................................................20

Control Panel .........................................................................................................22

Programme Table ..................................................................................................23

Option Programme ................................................................................................27

SMART FUNCTIONS .......................................................................30

Using Smart ThinQ Application ..............................................................................30

Smart Diagnosis™ Using a Smart Phone .............................................................31

Using Smart Diagnosis™ ......................................................................................31

MAINTENANCE ................................................................................32

Cleaning Your Washing Machine ...........................................................................32

Cleaning the Water Inlet Filter ...............................................................................32

Cleaning the Drain Pump Filter .............................................................................33

Cleaning the Dispenser Drawer .............................................................................34

Tub Clean ( ) (Optional) ....................................................................................34

Caution on Freezing During Winter .......................................................................35

TROUBLESHOOTING .....................................................................37

Diagnosing Problems ............................................................................................37

Error Messages .....................................................................................................40

SAFETY INSTRUCTIONS

The following safety guidelines are intended to prevent

unforeseen risks or damage from unsafe or incorrect operation

of the appliance.

The guidelines are separated into ‘WARNING’ and ‘CAUTION’

as described below.

This symbol is displayed to indicate matters and

operations that can cause risk. Read the part with this

symbol carefully and follow the instructions in order to

avoid risk.

WARNING

This indicates that the failure to follow the instructions can

cause serious injury or death.

CAUTION

This indicates that the failure to follow the instructions can

cause the minor injury or damage to the product.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of explosion, re, death, electric shock,

injury or scalding to persons when using this product, follow

basic precautions, including the following:

Children in the Household

This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person

responsible for their safety. Children should be supervised to ensure

that they do not play with the appliance.

Installation

•Never attempt to operate the appliance if it is damaged,

malfunctioning, partially disassembled, or has missing or broken

parts, including a damaged cord or plug.

•This appliance should only be transported by two or more people

holding the appliance securely.

•Do not install the appliance in a damp and dusty place. Do not

install or store the appliance in any outdoor area, or any area that

is subject to weathering conditions such as direct sunlight, wind, or

rain or temperatures below freezing.

•Tighten the drain hose to avoid separation.

•If the power cord is damaged or the hole of the outlet socket is

loose, do not use the power cord and contact an authorized service

centre.

•Do not use a multi outlet power board, extension cable or double

adapter with this appliance.

•This appliance must not be installed behind a lockable door, a

sliding door or a door with a hinge on the opposite side to that of

the appliance, in such a way that a full opening of the appliance

door is restricted.

•This appliance must be earthed / grounded via the mains supply

lead. In the event of malfunction or breakdown, grounding will

reduce the risk of electric shock by providing a path of least

resistance for electric current.

•This appliance is equipped with a power cord having an equipment-

earthing / grounding conductor and a grounding power plug. The

power plug must be plugged into an appropriate outlet socket that

is installed and earthed / grounded in accordance with all local

codes and ordinances.

•Improper connection of the equipment-grounding conductor can

result in risk of electric shock. Check with a qualied electrician or

service personnel if you are in doubt as to whether the appliance is

properly grounded.

•Do not modify the power plug provided with the appliance. If it

does not t the outlet, have a proper outlet installed by a qualied

electrician.

Operation

•Do not attempt to separate any panels or disassemble the

appliance. Do not apply any sharp objects to the control panel in

order to operate the appliance.

•Do not repair or replace any part of the appliance. All repairs

and servicing must be performed by qualied service personnel

unless specically recommended in this Owner’s Manual. Use only

authorized factory parts.

•Do not put animals, such as pets into the appliance.

•Keep the area underneath and around the appliance free of

combustible materials such as lint, paper, rags, chemicals, etc.

•Do not leave the appliance door open. Children may hang on the

door or crawl inside the appliance, causing damage or injury.

•Use new hose or hose-set supplied with the appliance. Reusing old

hoses can cause a water leak and subsequent property damage.

•Do not put in, wash or dry articles that have been cleaned in,

washed in, soaked in, or spotted with combustible or explosive

substances (such as waxes, wax removers, oil, paint, gasoline,

degreasers, drycleaning solvents, kerosene, petrol, spot removers,

turpentine, vegetable oil, cooking oil, acetone, alcohol, etc.).

Improper use can cause re or explosion.

•Never reach into the appliance while it is operating. Wait until the

drum has completely stopped.

•In case of ood, disconnect the power plug and contact the LG

Electronics customer information centre.

•Do not push down on the door excessively, when the appliance

door is open.

•Do not touch the door during a high temperature programme.

•Do not use ammable gas and combustible substances (benzene,

gasoline, thinner, petroleum, alcohol, etc.) near the appliance.

•If the drain hose or inlet hose is frozen during winter, use it only

after thawing.

•Keep all washing detergents, softener and bleach away from

children.

•Do not touch the power plug or the appliance controls with wet

hands.

•Do not bend the power cable excessively or place a heavy object

on it.

•Do not wash rugs, mats, shoes or pet blankets, or any other items

other than clothes or sheets, in this machine.

•This appliance must only be used for domestic household purposes

and should not be used in mobile applications.

•If there is a gas leakage (isobutane, propane, natural gas, etc.),

do not touch the appliance or power plug and ventilate the area

immediately.

Maintenance

•Securely plug the power plug in the outlet socket after completely

removing any moisture and dust.

•Disconnect the appliance from the power supply before cleaning

the appliance. Setting the controls to the OFF or stand by position

does not disconnect this appliance from the power supply.

•Do not spray water inside or outside the appliance to clean it.

•Never unplug the appliance by pulling on the power cable. Always

grip the power plug rmly and pull straight out from the outlet

socket.

Disposal

•Before discarding an old appliance, unplug it. Cut off the cable

directly behind the appliance to prevent misuse.

•Dispose of all packaging materials (such as plastic bags and

styrofoam) away from children. The packaging materials can cause

suffocation.

•Remove the door before disposing of or discarding this appliance to

avoid the danger of children or small animals getting trapped inside.

Disposal of Your Old Appliance

• This crossed-out wheeled bin symbol indicates that waste electrical and electronic

products (WEEE) should be disposed of separately from the municipal waste stream.

• Old electrical products can contain hazardous substances so correct disposal of your

old appliance will help prevent potential negative consequences for the environment

and human health. Your old appliance may contain reusable parts that could be

used to repair other products, and other valuable materials that can be recycled to

conserve limited resources.

• You can take your appliance either to the shop where you purchased the product,

or contact your local government waste ofce for details of your nearest authorised

WEEE collection point. For the most up to date information for your country please

see www.lg.com/global/recycling.

INSTALLATION

Parts

Transit bolts (x 4)

Power plug

Drawer

Control panel

Drum

Door

Drain hose

Drain tube

Drain pump lter

Cover cap (Location may

vary depending on products)

Adjustable feet (x 4)

Accessories

Cold supply hose (1 EA)

(Option: Hot (1 EA))

Spanner Caps for covering

transit bolt holes

(Optional)

Anti–slip sheets (2 EA)

(Optional)

Elbow bracket for

securing drain hose

(Optional)

Tie strap (Optional)

Specications

Model WD1208TC4W

Wash Capacity 8 kg

Power Supply 220 - 240 V~, 50 Hz

Size 600 mm (W) x 610 mm (D) x 850 mm (H)

Product Weight 67 kg

Permissible Water pressure 100 ~ 800 kPa (1.0 - 8.0 kgf / cm²)

Allowable temperature 5 – 35 °C

• The external hot water supply MUST NOT exceed 65°C

• No further backow protection required for connection to the water supply.

• Permissible cold water temperature : 4 - 25°C

• Specications subject to change by manufacturer.

• If the water supply pressure to the machine is more than 800 kPa (8.0 kgf/cm² ),Please consult a

plumber or qualied person about tting a water pressure reduction device.

• Country of origin: Made In China

• Appearance and specications may change without notice to improve the quality of the product.

Installation Place

Requirements

Location

2 cm

0.5 cm

2 cm10 cm

Level oor : Allowable slope under the entire

appliance is 1°.

Power outlet : Must be within 1 meter of either

side of the location of the appliance.

• Do not overload the outlet with more than one

appliance.

Additional Clearance : For the wall, 10 cm:

rear/2 cm: right & left side

• Do not place or store laundry products on top

of the appliance at any time. These products

may damage the nish or controls.

WARNING

• The plug must be plugged into an appropriate

outlet that is properly installed and earthed /

grounded in accordance with all local codes

and ordinances.

•

Positioning

• Install the appliance on a at hard oor.

• Make sure that air circulation around the

appliance is not impeded by carpets, rugs, etc.

• Never try to correct any unevenness in the

oor with pieces of wood, cardboard or similar

materials under the appliance.

• If it is impossible to avoid positioning the

appliance next to a gas cooker or coal burning

stove, an insulation (85x60 cm) covered with

aluminum foil on the side facing the cooker

or stove must be inserted between the two

appliances.

• Do not install the appliance in rooms where

freezing temperatures may occur. Frozen

hoses may burst under pressure. The reliability

of the electronic control unit may be impaired

at temperatures below freezing point.

• Ensure that when the appliance is installed, it

is easily accessible for an engineer in the event

of a breakdown.

• With the appliance installed, adjust all four

feet using the transit bolt spanner provided to

ensure the appliance is stable, and a clearance

of approximately 5 mm is left between the

top of the appliance and the underside of any

worktop

• If the appliance is delivered in winter and

temperatures are below freezing, place the

appliance at room temperature for a few hours

before putting it into operation.

WARNING

• This equipment is not designed for maritime

use or for use in mobile installations such as

caravans, aircraft etc.

Electrical Connection

• Do not use an extension cord or double

adapter.

• Always unplug the appliance and turn off the

water supply after use.

• Connect the appliance to an earthed socket in

accordance with current wiring regulations.

• The appliance must be positioned so that the

plug is easily accessible.

• Repairs to the appliance must only be carried

out by qualied personnel. Repairs carried out

by inexperienced persons may cause injury

or serious malfunctioning. Contact your local

service centre.

Unpacking and Removing

Transit Bolts

Lift the appliance off the foam base.

• After removing the carton and shipping

material, lift the appliance off the foam

base. Make sure the tub support comes off

with the base and is not stuck to the bottom

of the appliance.

• If you must lay the appliance down to

remove the carton base, always protect the

side of the appliance and lay it carefully on

its side. Do not lay the appliance on its front

or back.

Tub Support

(Optional)

Carton

base

Remove the bolt assemblies.

• Starting with the bottom two transit

bolts, use the spanner (included) to fully

loosen all transit bolts by turning them

counterclockwise. Remove the bolt

assemblies by wiggling them slightly while

pulling them out.

Transit

bolt

Retainer

Install the hole caps.

• Locate the hole caps included in the

accessory pack or attached on the back.

Cap

NOTE

• Save the bolt assemblies for future use. To

prevent damage to internal components, Do

not transport the washing machine without

reinstalling the transit bolts.

• Failure to remove transit bolts and retainers

may cause severe vibration and noise, which

can lead to permanent damage to the washing

machine. The cord is secured to the back of

the washing machine with a transit bolt to help

prevent operation with transit bolts in place.

Using Anti-Slip Sheets

(Optional)

If you install the appliance on a slippery surface,

it may move because of excessive vibration.

Incorrect leveling may cause malfunction

through noise and vibration. If this occurs, install

the anti-slip sheets under the leveling feet and

adjust the level.

Clean the oor to attach the anti-slip sheets.

• Use a dry rag to remove and clean foreign

objects and moisture. If moisture remains,

the anti-slip sheets may slip.

Adjust the level after placing the appliance in

the installation area.

Place the adhesive side of the anti-slip

sheets on the oor.

• It is most effective to install the anti-slip

sheets under the front legs. If it is difcult to

place the pads under the front legs, place

them under the back legs.

This side up

Adhesive side

Ensure the appliance is level.

• Push or rock the top diagonal edges of

the appliance gently to make sure that the

appliance does not rock. If the appliance

rocks, level the appliance again.

NOTE

• You can obtain anti-slip sheets from an LG

Service Centre or any Hardware store.

Wooden Floors (Suspended

Floors)

• Wooden oors are particularly susceptible to

vibration.

• To help reduce vibration we recommend you

place rubber cups at least 15 mm thick of the

each foot of the appliance, secured to at least

two oor beams with screws.

Rubber Cup

• If possible install the appliance in one of the

corners of the room, where the oor is more

stable.

• Fit the rubber cups to reduce vibration.

NOTE

• Proper placement and leveling of the washing

machine will ensure long, regular, and reliable

operation.

• The washing machine must be 100%

horizontal and stand rmly in position.

• It must not ‘Seesaw’ across corners under the

load.

• The installation surface must be clean, free

from oor wax and other lubricant coatings.

• Do not let the feet of the washing machine get

wet. Failure to do so may cause vibration or

noise.

• You can obtain rubber cups

(p/no.4620ER4002B) from the LG Service

Centre.

Leveling the Appliance

If the oor is uneven, turn the adjustable feet as

required (Do not insert pieces of wood etc. under

the feet). Make sure that all four feet are stable

and resting on the oor and then check that the

appliance is perfectly level (Use a spirit level).

• Once the appliance is level, tighten the lock

nuts up towards the base of the appliance. All

lock nuts must be tightened.

Raise Lower

Lock nut

Tighten all 4

lock nuts securely

Diagonal Check

• When pushing down on the edges of the top

plate diagonally, the appliance should not move

up and down at all (check both directions). If

the appliance rocks when pushing the machine

top plate diagonally, adjust the feet again.

NOTE

• Timber or suspended type ooring may

contribute to excessive vibration and

unbalance.

• Do not install the washer on any elevated

surface, stand or plinth as it can become

unstable and fall causing serious injury and

damage.

Connecting the Water Supply

Hose

• Water supply pressure must be between 100

~ 800kPa (1.0‒8.0 kgf/cm

).If the water supply

pressure to the machine is more than 800

kPa (8.0kgf/cm² ),Please consult a plumber or

qualied person about tting a water pressure

reduction device.

• Do not overtighten the water supply hose.

• If the water supply pressure is more than 800

kPa, a pressure limiting device should be

installed.

• Periodically check the condition of the hose

and replace the hose if necessary.

Checking the Rubber Seal on the

Water Supply Hose

Two rubber seals are supplied with each

water inlet hose. They are used for preventing

water leaks. Make sure the connection to

taps is sufciently tight. Do not use any

mechanical device to overtighten the inlet

hoses. Hand tighten only with the aid of a soft

cloth if necessary. After both ends have been

connected, open the taps slowly and check for

leaks..

Hose connector

Rubber seal

Hose connector

Rubber seal

+ 30 hidden pages