LG WD-1050F User Manual

Washing Machine

OWNER'S MANUAL

WD-1050F

Thank you for purchasing LG Fully Automatic Washer. Please read your owner's manual carefully, it provides instructions on safe installation, use and maintenance. Retain it for future reference. Record the model and serial numbers of your washing machine

Product Features

Contents

Protection against wrinkles

With the alternate rotation of the drum, the wrinkling in the laundry is minimized.

Preferred temperature selection

There are 4 temperature selections between cold and 95¡C

Low noise speed control system

By sensing the load and balance, evenly distributes the load to minimize the spinning noise level.

Child-Lock

The Child-Lock system has been developed to prevent children from pressing any button to change the program during operation.

Delay finish

Delayed Washing can be set easily from 3 hours to 19 hours.

Auto Restart

Although the washing machine is turned off by a power failure, it restarts automatically in its stopped process when power is supplied again and the process is properly adjusted and it will be the same when the machine unplugged in operation is plugged in again.

Warnings

⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄

Specification

⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄

Installation

⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄

Preparing your laundry

⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄

Adding detergent

⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄

Control panel

⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄

How to use your washing machine

⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄

Delayed washing

⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄

Maintaining

⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄

Trouble-shooting guide

⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄˝⁄⁄

Temp Eco/Rapid

Warnings

¡¡ÆÆ

You must read the whole of this instruction book before you use the appliance. Follow the advice carefully.

Keep the book for future reference. If you sell or give away the appliance, make sure that the book is passed to the new owner.

¡¡ÆÆ

The following warnings are provided in the interests of overall safety. You must read them before the appliance is installed or used.

ƒUThis appliance is designed to be used by adults.

Children should not be allowed to touch the controls or play with the product.

ƒUIt is dangerous to modify the specifications of this

appliance in any way.

ƒUThis appliance is heavy. Care should be taken

when moving it.

ƒUAll packaging and transit bolts must be removed

before the appliance is used. Serious damage may occur if this is not done.

ƒUAny plumbing work required to install this

appliance should be carried out by a qualified plumber or a competent person.

ƒUAny electrical work required to install this

appliance should be carried out by a qualified electrician or a competent person.

ƒUMake sure that the appliance does not stand on

its electrical supply cable.

ƒUIf the machine is situated on a carpeted floor,

please adjust the feet to ensure that air can circulate freely.

ƒUAlways unplug the appliance and turn off the

water tap after use.

ƒUDo not overload the appliance. ƒUOnly wash fabrics which are designed to be

machine washed. If in doubt, follow the instructions you find on the label of the item itself.

ƒUAvoid electric heaters, candles, etc. near the

machine. It may ignite or deform the machine.

ƒUDon¡ﬂt sprinkle water. It may cause a fire or

electric shock.

ƒUUse the exclusive AC 220V-240V outlet with

ground terminal. Do not use an extension cord or

double adapter.

ƒUMake sure that all pockets are empty. Hard,

sharp objects such as coins, safety pins, nails, screws or stones can cause extensive damage.

ƒUDo not wash laundry stained with edible oil,

machine oil, dry-cleaning oil, gasoline, etc. It may cause fire or explosions.

ƒUThis appliance is designed for domestic use. It

must not be used for purposes other than those for which it was designed.

ƒUDo not machine wash fabrics which are saturated

with petroleum products. If volatile cleaning fluids have been used, make sure that they are thoroughly removed from the fabric before it is placed in the appliance.

ƒUDo not operate near places with ignitable

material such as gasoline, benzene, etc. or inflammable gas leak. Due to volatile nature of these material, It can cause fire or explosions.

ƒUUse only the recommended quantities of fabric

softener. An excessive amount could damage the laundry.

ƒULeave the porthole door slightly ajar between

washes to preserve the door seal.

ƒUBefore you open the door of the machine check

that the water has drained. Do not open the door if you can still see water.

ƒUPets and children may climb into the washing

machines. Check your appliance each time before use.

ƒUThe glass door becomes very hot during

washing. Keep children away from the appliance while it is in use.

ƒUYou should not attempt to repair the machine

yourself. Repairs carried out by inexperienced or unqualified persons may cause injury and/or more serious faults to the machine.

ƒUThis product should be serviced by an authorized

Service Centre only, and only genuine spare parts should be used.

ƒUWhen disposing of your old washing machine,

the electric cable must be cut off and the door catch must be made inoperative to avoid it becoming a death trap for a child.

§ Name : Front loading washing machine

§ Power supply : 220-240V, 50Hz

§ Size : 600mm(W)¡¿600mm(D)¡¿850mm(H)

§ Weight : 67kg

§ Wash capacity : 7.0kg

§ Heating : 2200W

§ Spin speed : 400/600/800/1000rpm

§ Water consumption : 67 (9.6 / kg )

§ Permissible water pressure : 0.3-10kgf/

§†(30-1000kPa)

§ Volume of washing container : 60 ƒ{The appearance and specifications may be varied without notice to raise

the units quality

Specification

Inlet hose (1EA)

Spanner

Power plug

Control panel

Door

Lower cover

Levelling legs

(For detergent and

fabric softener)

Drawer

Drum

Drain hose

Lower cover cap

Drain pump filter

Drain plug

If the supply cord is damaged,

it must be replaced by the

manufacturer or its service agents or a similarly qualified person in order to avoid a hazard.

§§

Accessories

Installation

Levelling leg

Higher Lower

Levelling leg

How to disassemble the transit bolts.

ƒUTo protect the washer during transportation, the special

4 bolts are locked. Before operating the washer, remove

the bolts. ( If they are not removed, it may cause heavy vibration, noise and malfunction)

1. Locate the 4 bolts that secure the washer.

2. Unscrew the 4 bolts with a spanner provided.

3. Take out the 4 bolts.

Level adjustment

1. Select a place for installation

ƒUPlace it on a firm and even floor ƒUPlace it more than 2cm away from the wall or other

furniture

2.Check the gap

ƒUEnsure all feet are firmly on the floor.

3.Level adjustment

ƒUAfter adjusting the level, check it by shaking the washer.

Readjust the level if necessary.

ƒULevelling should be done within 1.5 degree angle.

ƒUKeep the transit bolts and spanner

for future use in case the machine is to be transported again.

ƒUIf the washer is not levelled, it may cause

noise or vibration.

Electrical connection

ƒUDo not use an extension cord or double adapter. ƒUIf the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly

qualified person in order to avoid a hazard.

ƒUAlways unplug the machine and turn off the water supply after use. ƒUConnect the machine to an earthed socket in accordance with current wiring regulations.

ƒUIf the appliance is supplied from a cord extension set or electrical portable outlet device, the

cord extension set or electrical portable outlet device should be positioned so it is not subject to splashing or ingress of moisture.

ƒUIf a stationary appliance is provided with a supply cord and a plug, the instructions shall state

that the appliance must be positioned so that the plug is accessible.

Caution

Water drain

ƒUHook over the edge of a sink using the plastic hose hanger supplied with the machine. ƒUMake sure there are no kinks in the hose and that it is not crushed.

Secure the hose so that it can not be dislodged while the appliance is running.

ƒUThe drain hose should not be placed higher than 85cm above the floor.

§§

Connecting the inlet hose

Unscrew the fixing screw to attach the faucet.

Push the connector up till the rubber packing is in tight contact with the faucet. Then tighten the 4 screws.

Push the water supply hose vertically upwards so that the rubber packing within in the hose can adhere completely to the faucet and then tighten it by screwing it to the right.

¥ Make sure that the rubber seal is

inside the hose connector.

¥ Your machine comes with only

cold water connection.

¥ Make sure that there are no kinks

in the hose and that it is not crushed.

¥ Two rings are supplied with the water inlet hose in the valve

connector in order to prevent water leaks.

¥ Your machine comes with only cold water connection.

Connect to cold water using the inlet valve.

¥ Check water tightness of washing machine connections by

turning the tap completely on.

¥ Periodically check the condition of the hose and replace the

hose if necessary.

¥ Make sure that there are no kinks in the hose and that it is not

crushed.

§§

Connecting the inlet hose (How to connect the hose of screw type.)

Rubber seal

connector

+ 14 hidden pages