LG WD-10152SUP, WD-10154SUP, WD-10153SUP, WD-10150SUP, WD-10155SUP Service Manual
...
WASHINGMACHINE
SERVICE MANUAL
READ THIS MANUAL CAREFULLY TO DIAGNOSE TROUBLE
CORRECTLY BEFORE OFFERING SERVICE.
website : http://www.LGEservice.com
e-mail : http://LGEservice.com / techsup.html
MODEL : WD
-1015(0~9)S(U)P WD-9015(0~9)S(U)P
WD-8015(0~9)S(U)P WD-6515(0~9)S(U)P
WD-1015(0~9)N(U)P WD-9015(0~9)N(U)P
WD-8015(0~9)N(U)P WD-6515(0~9)N(U)P
WD-1015(0~9)T(U)P WD-9015(0~9)T(U)P
WD-8015(0~9)T(U)P WD-6515(0~9)T(U)P
CAUTION
CONTENTS
1. SPECIFICATION............................................................................................................................3
2. FEATURES & TECHNICAL EXPLANATION ................................................................................ 4
3. PARTS IDENTIFICATION ............................................................................................................ 6
4. INSTALLATION............................................................................................................................. 7
5. OPERATION ................................................................................................................................10
6. WIRING DIAGRAM / PROGRAM CHART...................................................................................12
7. TROUBLESHOOTING.................................................................................................................13
7-1.BEFORE PERFORMING SERVICE ....................................................................................13
7-2.TEST MODE ........................................................................................................................13
7-3.HOW TO KNOW THE WATER LEVEL FREQUENCY.........................................................13
7-4.ERROR DISPLAY ................................................................................................................14
8. ERROR DIAGNOSIS AND CHECK LIST ....................................................................................16
8-1. DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION ...........................................16
8-2. FAULT DIAGNOSIS AND TROUBLESHOOTING ..............................................................19
9. DISASSEMBLY INSTRUCTIONS ...............................................................................................25
10. EXPLODED VIEW .....................................................................................................................32
10-1. THE EXPLODED VIEW OF CABINET ASSEMBLY .........................................................32
10-2. THE EXPLODED VIEW OF CONTROL PANEL & DISPENSER ASSEMBLY..................33
10-3. THE EXPLODED VIEW OF DRUM & TUB ASSEMBLY...................................................34
* APPENDIX (Replacement parts list)..........................................................................................35
2
ITEM
WD-1015(0~9)S(U)P WD-1015(0~9)N(U)P WD-8015(0~9)T(U)P WD-1015(0~9)T(U)P
WD-8015(0~9)S(U)P WD-8015(0~9)N(U)P WD-6515(0~9)T(U)P WD-9015(0~9)T(U)P
POWER SUPPLY220-240V~, 50Hz
PRODUCT WEIGHT50kg55kg65kg
WASHING 190W
SPIN (800rpm) 300W
DRAIN MOTOR 32W
WASH HEATER 1900W 2000W 2100W
WASH 50rpm
WD-6515(0~9)S(N)(T)(U)P 400 / 500 / 600 / 650rpm
SPIN
WD-8015(0~9)S(N)(T)(U)P 400 / 500 / 600 / 800rpm
WD-9015(0~9)S(N)(T)(U)P 400 / 600 / 800 / 900rpm
WD-1015(0~9)S(N)(T)(U)P 400 / 600 / 800 / 1000rpm
OPERATION WATER PRESSURE 0.3-10kgf / cm
2
(
30-1000kPa
)
CONTROL TYPE Electronic
Synthetic(1.5), Delicate(1.0)Synthetic(1.7), Delicate(1.5)Synthetic(2.0), Delicate(2.0)Synthetic(3.0), Delicate(2.0)
Wool(1.0), Hand Wash(1.0) Wool(1.5), Handwash(1.5) Wool(2.0), Handwash(2.0) Wool(2.0), Handwash(2.0)
Quick 30(1.0) Quick 30(1.5) Quick 30(2.0) Quick 30(2.0)
DIMENSION
[(W)mm X (D)mm X (H)mm]
600 X 360 X 850 600 X 440 X 850 600 X 550 X 850 600 X 550 X 850
WASH PROGRAM
Cotton, Synthetic, Delicate, Wool, Hand Wash, Quick 30, Rinse+Spin
OPTION Bio, Time Save, Rinse +, Pre-Wash, Crease Care, Rinse Hold
DOOR SWITCH TYPE Bi-Metal type
WATER LEVEL 9 steps
(
by sensor
)
RESERVATION From 3 hours to 19 hours
SENSING OF THE LAUNDRY AMOUNT Adopted
FUZZY LOGIC Adopted
DISPLAY OF THE REMAINING TIME Adopted
ERROR DIAGNOSIS 10 items
POWER AUTO OFF Adopted
CHILD LOCK Adopted
AUTO RESTART Adopted
3
1. SPECIFICATION
ELECTRICITY
CONSUMPTION
REVOLUTION
SPEED
WASH CAPACITY
Protection against creases
With the alternate rotation of the drum, creasing in the laundry
is minimized.
More economical by Fuzzy Logic System
FUZZY Logic System detects the amount of load and water
temperature, and then determines the optimum water level
and washing time to minimize energy and water
consumption.
Child-Lock
The Child-Lock system has been developed to prevent
children from pressing any button
(except Power button)
to change the programme during operation.
Low noise speed control system
By sensing the amount of load and balance, automatical
distributes load evenly to minimize the spinning noise level.
Auto Restart
Although the washing machine is turned off by a power failure,
it restarts automatically where it stopped when power is
supplied again. and it will be the same the machine is
unplugged and is plugged in again.
2. FEATURES & TECHNICAL EXPLANATION
4
2-1.FEATURES
2-2.DETERMINE WASHING TIME BY FUZZY LOGIC
To get the best washing performance optimal time is determined by sensing of water temperature,
selected washing temperature and laundry amount.
2-3.WATER LEVEL CONTROL
This model adopts a pressure sensor which can sense the water level in the tub.
When the water level reaches to the preset level the water supply is stopped, then the washing program proceeds.
Spinning does not proceed until the water in the tub reduces a certain level.
2-4.THE DOOR CAN NOT BE OPENED
While program is operating.
While Door Lock light turns on.
5
FUZZY
LOGIC
laundry
amount
selected
washing
temperature
water
temperature
washing time
rinse time
spin rhythm, time
the best
washing
performance
SENSING
PROCESSING
DETERMINATION
EFFECT
3. PARTS IDENTIFICATION
6
Time Save
Crease Care
Hot/Cold (2EA)
Cold (1EA)
Wrench
ACCESSORIES
Before servicing ask the customer what the trouble is.
Check the adjustment (power supply is 220-240V, remove the transit bolts....)
Check the troubles referring to the troubleshooting.
Decide service steps referring to disassembly instructions.
Then, service and repair.
After servicing, operate the appliance to see whether it works OK or NOT.
STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT INSTALL THE APPLIANCE ADJUST THE
BOLTS
ON FLAT AND FIRM SURFACE HORIZONTAL
Remove the transit bolts • Turn the adjustable feet to
(4EA:) with supplied wrench. set the appliance horizontally.
• Keep the transit bolts and
wrench for future use.
• Insert the 4 caps provided
into the hole.
• The appliance goes up by
rotating the feet clockwise.
• The appliance comes down by
rotating the feet counterclockwise.
4. INSTALLATION
7
1
High
Low
HOW TO CONNECT INLET HOSE
• Check that the rubber washer is inside of the
valve connector.
• Connect the inlet hose firmly to prevent leak.
CONNECT DRAIN HOSE
CONNECT POWER PLUG
8
• Make sure that the hose is not twisted.
The drain hose should be placed under 100cm from the floor.
• Connect the power plug to the wall outlet.
• Avoid connecting several electric devices,
It may be the cause of a fire.
• Avoid submerging the end of the hose.
TEST OPERATION
9
• Connect the power plug to • In case of cotton program.
the outlet.
• Connect the inlet hose.
Preparation for Press the power button. Press
the
START / PAUSE
washing. button.
•
Press both Pre Wash and Time
Delay button simultaneously the
present temperature will be displayed.
•
Check if the drum rotates clockwise
and counterclockwise.
•
Check if water is supplied through the
detergent dispenser.
• Power off and then power on.
• Check if the door can be
opened after Door Lock lamp
turns off.
• Power off and then power on.
Turn on Spin lamps after
pressing the Start / Pause button
and Start the machine again.
• Check drain and spin.
•
If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
Check the water heating. Check automatic reverse Check the water supply.
turn.
Check drain and spin
Power off and open the
Water removal
door
10
5. OPERATION
LED display
•
Display the estimated remaining time
(Hour : Minute) to finish.
•
In case of abnormal operation, error
indications are displayed.
( )
•
See troubleshooting guide.
Eco
•
It is possible in cotton
course when 60 C
Power button
•
Press the button to turn power on and off.
•
Press the button to cancel the time delay.
Start / Pause button
•
Use the button to start or pause wash cycle.
•
The power turns off automatically 4 minutes
after the pause button is pressed.
Wash program selector
•
8 program can be set depending
on the type of the laundry.
•
If the power button is pressed,
all lamps are on
•
By turning the dial, [Cotton
Delicate Quick 30
Rinse + Spin Spin Hand
Wash Wool Synthetic] can
be selected.
(The opposite is possible)
Loading...