LG WD100CK User Manual [nl]

OWNER’S MANUAL

WASHING MACHINE

WD100C* WD200C* WD205C*

MFL68267005

www.lg.com

Please read this owner's manual thoroughly before operating and keep it handy for reference at all times.

ENGLISH

ESPAÑOL

MFL68267005_E.indd 1 16. 5. 16. 오후 3:43

TABLE OF CONTENTS

3 IMPORTANT SAFETY INSTRUCTIONS

3 Basic Safety Precautions

4 Grounding Requirements

5 Safety Instructions for Installation 6 Safety Instructions for Use, Care, Cl eaning and

Disposal

7 FEATURES AND BENEFITS

7 Key Parts and Components

7 Included Accessories

7 Required Accessories

8 INSTALLATION INSTRUCTIONS

8 Choose the Proper Location

8 Power Outlet

8 Flooring

9 Unpacking and Removing Shipping Material

10 Overview of Connections

11 Connecting the Water Lines 12 Connecting the Drain H ose

12 Using The Drain Connector

13 Leveling the Washing Machine

14 Connecting to the Power Supply 15 Sorting Wash Loads

16 Detergent and Dispenser Use

17 HOW TO USE

17 Control Panel Features

18 Time and Status Display 19 Ope rating the Washer

20 Cycle Guide 20 Wash Cycles

21 Options

21 Warm Water 21 Ext ra Rinse

21 Child Lock

22 CARE AND CLEANING

22 Re gular Cleaning

22 Cleaning the E xterior 22 Care and Cleaning of the Interio r 22 Tub Clean Cycle 22 Removing Mineral Buildup

22 Leave the Lid Open

23 Maintenance

24 SPECIFICATIONS

24 SMART DIAGNOSIS™ SYSTEM

25 TROUBLESHOOTING

25 Faqs: Frequently Asked Questions 26 Normal Sounds You May Hear

26 Before Calling for Ser vice

30 Error Codes

32 WARRANTY

MFL68267005_E.indd 2 16. 5. 16. 오후 3:43

ENGLISH

SAFETY MESSAGES

For your safet y, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent proper ty damage, injury to persons, or death. Your safety and the safety of others is very important. There are many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage and /or serious bodily harm or death.

All safety messages will follow the safety alert symbol and either the word WARNING or CAUTION. These words mean:

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury,

and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

You c an b e ki lle d or seri ously inj ured if you d on’t f oll ow ins truction s.

You may be slightly injured or cause damage to the product if you do not follow instructions.

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

y Use this appliance only for its intended purpose as described in this Owner's Manual.

y Before use, the washer must be properly installed as described in this manual.

y Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gaso-

line, dry cleaning solvents, or other flammable or explosive substances, as they give off vapors that

could ignite or explode.

y Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash

water. These substances give off vapors that could ignite or explode.

y Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for

such a period, before using the washer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

y Do not allow children to play on or in the washer. Close supervision of children is necessary when the

washer is used near children. A child might become trapped inside the washer and suffocate.

y Before the washer is removed from service or discarded, remove the lid to prevent children from

climbing inside.

y Do not install or store the washer where it will be exposed to the weather or freezing temperatures.

y Do not tamper with controls.

y Keep the area underneath and around your appliances free of combustible materials (lint, paper, rags,

etc.), gasoline, chemicals and other flammable vapors and liquids.

y Service must be performed by a qualified service technician. Do not disassemble the washer.

y See Installation Instructions for grounding requirements.

y WARNING : This product contains chemicals known to the State of California to cause cancer and birth

defects or other reproductive harm. Wash hands after handling.

y ALWAYS follow the fabric care instructions supplied by the garment manufacturer.

y Do not place items exposed to cooking oil in your washer. Items contaminated with cooking oils may

contribute to a chemical reaction that could cause a load to catch fire.

BASIC SAFETY PRECAUTIONS

WARNING

WARNING CAUTION

MFL68267005_E.indd 3 16. 5. 16. 오후 3:43

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

For your safety, the information in this manual must be followed to minimize the risk of fire, explosion or electric shock, or to prevent property damage, injury to persons, or death.

GROUNDING REQUIREMENTS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. CERTAIN INTERNAL PARTS ARE INTENTIONALLY NOT GROUNDED AND MAY PRESENT A RISK OF ELECTRIC SHOCK ONLY DURING SERVICING. SERVICE PERSONNEL - DO NOT CONTACT THE FOLLOWING PARTS WHILE THE APPLIANCE IS ENERGIZED: PUMP, VALVE, MOTOR, CONTROL.

Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or servicer if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause serious injury, fire, electric shock, or death.

y Use fabric softeners or products to eliminate static only as recommended by the manufacturer.

y This washer is not designed for maritime use or for mobile installations such as in RVs, aircraft, etc.

y Turn off the water faucets and unplug the washer if the machine is to be left for an extended period of

time, such as during vacations.

y Do not use to dry articles containing foam rubber or similarly textured rubber-like materials.

y Packaging material can be dangerous for children. There is a risk of suffocation! Keep all packaging from

children.

y Always check the inside of the washer for foreign objects before loading laundry. Keep the lid closed

when not in use.

y Do not reach into the appliance if the tub or agitator is moving. y In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate the area immediately. Do not

turn any appliance or light on or off. Do not use a ventilating fan. A spark may result in an explosion or

fire.

y Do not repair or replace any part of the appliance or attempt any servicing unless specifically recom -

mended in the user-maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.

WARNING

MFL68267005_E.indd 4 16. 5. 16. 오후 3:43

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electric shock or injur y to persons when using this appliance, follow basic precautions, including the following:

y Refer to INSTALLATION INSTRUCTIONS for detailed grounding procedures. Installation instructions are

packed with the washer for installer’s reference. If the washer is moved to a new location, have it checked and reinstalled by a qualified service technician. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

y The power cord of this appliance is equipped with a 3 -prong (grounding) plug which mates with a standard

3-prong (grounding) wall outlet to minimize the possibility of electric shock from this appliance.

y Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. Failure to

follow this warning can cause serious injury, fire, electric shock, or death.

y For personal safety, this appliance must be properly grounded. Failure to follow this warning can cause

serious injury, fire, electric shock, or death.

y This washer must be plugged into a 120 VAC, 60 Hz grounded outlet. Failure to follow this warning can cause

serious injury, fire, electric shock, or death.

y Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Failure to follow this warning can cause serious injury, fire, electric shock, or death.

y Where a standard 2- prong wall outlet is encountered, it is your personal responsibility and obligation to have

it replaced with a properly grounded 3- prong wall outlet. Failure to follow this warning can cause serious

injury, fire, electric shock, or death.

y Do not install on carpet. Install washer on a solid floor. Failure to follow this warning can cause serious leak

damage.

y The washer should always be plugged into its own individual electrical outlet which has a voltage rating that

matches the rating plate. This provedes the best performance and also prevents overloading house wiring

circuits which could cause a fire hazard from overheated wires.

y If installing the pedestal washer with an LG front-loading washer and an LG gas dryer, and insufficient outlets

are available, an extension cord rated at no less than the branch circuit may be used.

y Never unplug your washer by pulling on the power cord. Always grip plug firmly and pull straight out from the

outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

y Repair or immediately replace all power cords that have become frayed or otherwise damaged. Do not use

a cord that shows cracks or abrasion damage along its length or at either end. Failure to follow this warning

can cause serious injur y, fire, electric shock, or death.

y When installing or moving the washer, be careful not to pinch, crush, or damage the power cord. Failure to

follow this warning can cause serious injury, fire, electric shock, or death.

y The washer must be installed and electrically grounded by a qualified service person in accordance with local

codes to prevent shock hazard and assure stability during operation.

y The washer is heavy. Two or more people may be needed to install and move the appliance. Failure to do so

can result in back or other injury.

y Store and install the washer where it will not be exposed to temperatures below freezing or exposed to

outdoor weather conditions. Failure to follow this warning can cause serious leak damage.

y To reduce the risk of electric shock, do not install the washer in humid spaces. Failure to follow this warning

can cause serious injur y, fire, electric shock, or death.

y To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including the

use of long sleeved gloves and safety glasses. Failure to follow all of the safety warnings in this manual could

result in property damage, injury to persons or death.

y Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has

missing or broken parts, including a damaged cord or plug.

y To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the

washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning.

y Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor. If

you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result in electric shock or fire.

For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR INSTALLATION

WARNING

MFL68267005_E.indd 5 16. 5. 16. 오후 3:43

IMPORTANT SAFETY INSTRUCTIONS

For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.

y The pedestal washer is for installation and use only underneath an LG manufactured front-loading washer.

The pedestal washer is not designed to operate as a standalone unit, under an LG top-loading washer, under

a dryer, or under a non-LG manufactured washer. y Do not tamper with the stacking switch. Doing so may cause machine malfunctions or serious injury. y Do not operate the pedestal washer with two or more pedestal washers stacked. Doing so may cause

machine malfunctions or serious injury.

SAVE THESE INSTRUCTIONS

SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING AND DISPOSAL

To reduce the risk of fire, electric shock or injur y to persons when using this appliance, follow basic precautions, including the following:

y Unplug the washer before cleaning to avoid the risk of electric shock. y Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish. y Do not put oily or greasy rags or clothing on top of the washer. These substances give off vapors that could

ignite the materials.

y Do not wash items that are soiled with vegetable or cooking oil. These items may contain some oil after laun-

dering. Due to the remaining oil, the fabric may smoke or catch fire by itself.

y Disconnect this appliance from the power supply before attempting any user maintenance. Turning the

controls to the OFF position does not disconnect this appliance from the power supply. Failure to follow this

warning can cause serious injury, fire, electric shock, or death.

y Do not combine laundry products for use in one load unless specified on the label. y Do not mix chlorine bleach with ammonia or acids such as vinegar. Follow package directions when using

laundry products. Incorrect usage can produce poisonous gas, resulting in serious injury or death.

y Do not reach into the washer while parts are moving. Before loading, unloading, or adding items, press the

START/PAUSE button and allow the drum to coast to a complete stop before reaching inside. Failure to follow

this warning can cause serious injury, fire, electric shock, or death.

y Do not allow children to play on or in the washer. Close supervision of children is necessary when the

washer is used near children. As children grow, teach them the proper, safe use of all appliances. Failure to

comply with these warnings could result in serious injury to persons or death.

y Destroy the carton, plastic bag, and other packing materials after the washer is unpacked. Children might

use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers.

Failure to comply with these warnings could result in serious injur y to persons or death.

y Keep laundry products out of children’s reach. To prevent injury to persons, observe all warnings on product

labels. Failure to comply with these warnings could result in serious injury to persons or death.

y Remove the lid to the washing compartment before your washer is removed from service or discarded to

avoid the danger of children or small animals getting trapped inside. Failure to do so can result in serious

injury to persons or death.

y Keep hands and foreign objects clear of the lid and latch area when closing the lid. Failure to keep hands clear

can result in personal injury. y Do not touch the power plug with wet hands. This may result in electric shock. y Do not touch the water draining from the machine during a high-temperature wash or drying cycle. This

water is hot, and touching it may result in burns or injury. y Do not stand on top of the appliance or place objects(such an laundry, lighted candles,lighted cigarettes,

dishes, chemicals, metal objects, etc.) on the appliance. This may result in electric shock, fire, problems with

the product, or injury.

y Do not install or store the washer where it will be exposed to freezing temperatures. Water may freeze in

the hoses and damage the washer. Winterize the washer before storing or moving it in freezing tempera-

tures. Refer to the Maintenance section for instructions. y To avoid breaking the lid glass, do not push too hard on the lid when closing. y Do not step on the pedestal washer. Doing so may damage the washer or cause serious injury. y Do not open or close the lid by foot. Doing so may result in personal injury or damage to the product.

WARNING

MFL68267005_E.indd 6 16. 5. 16. 오후 3:43

ENGLISH

FEATURES AND BENEFITS

KEY PARTS AND COMPONENTS

A INVERTER DIRECT DRIVE MOTOR

The inverter motor, which is directly connected to the tub, produces less noise and vibration while offering outstanding durabilit y and a long lifespan.

B COMPACT CAPACITY & NEVERUST™ STAINLESS STEEL TUB

The efﬁcient design provides capacity in a compact space.

C FRONT TOUCH PANEL

The simple LED display shows cycle options, set ting, cycle stat us and estimated time remaining. The touch but tons of fer more convenience and a premium design aesthetic.

D SMART DIAGNOSIS™

If you ever experience an issue with your LG washer, you don’t have to worry. The SmartDiagnosis™ feature helps the service center diagnose problems over the phone, or with a simple app on your smart phone, helping you minimize costly, inconvenient service calls.

E REMOTE CONTROL RCW1

Don't want to bend down to reach the controls? Set cycles with the touch of a button on the available remote control. (Included accessory (model WD205C), or available for purchase online or through an LG retailer.)

NOTE: Contact LG Customer Service at 1-80 0-243-0000 (1-888-542-2623 in Canada) if any accessories are

missing or to purc hase accessories. For a list of LG front-loading washers which are compatible with the pedestal washer, visit the LG website at www.lg.com/us/twinwash

Drawer

Lid

Control panel

Leveling feet

Leg Support

Stacking Switch

Top Cover

INCLUDED ACCESSORY REQUIRED ACCESSORY

2 Inlet

Hoses-Short

2 Inlet Hose

Y-C onn ect ors

Drain Hose

Y-C onn ect or

Drain Hose Non-Skid Pads

(18EA)

(5EA)

Max load

(2 tsp., 10 g)

Normal

(1 tsp., 5 g)

2 Inlet Hoses

Wrench 2 Tie Straps

2 Wire clamps and

1 Band clamp

Screws Detergent Dispenser

Appear ance and speciﬁcat ions may v ary without notice to improve the qualit y of the produc t.

MFL68267005_E.indd 7 16. 5. 16. 오후 3:43

INSTALLATION INSTRUCTIONS

CHOOSE THE PROPER LOCATION

y This pedestal washer must be installed underneath

a matching front-loading LG washing machine manufactured after 2009. (The 29" wide machine must be stacked under a 29" wide LG front-loading washer. The 27" wide machine must be stacked under a 27" wide

LG front-loading washer.) y The pedestal washer will not work as a standalone unit. y The pedestal washer must be stacked under an LG

brand appliance in order to operate properly.

CAUTION

POWER OUTLET

y The power outlet must be within 60 in. (1.5 m) of either

side of the washer.

y The appliance and outlet must be positioned so that the

plug is easily accessible.

y For best performance, plug the washer into its own

individual outlet. If necessary, use a new, UL-listed

3-prong adapter or 3-wire extension cord with a 3- prong

(grounding) plug rated at no less than the branch circuit.

Do not use an extension cord longer than three feet.

Failure to follow these warnings can result in serious

injury, fire, electric shock, or death y The outlet must be grounded in accordance with current

wiring electric codes and regulations. y Time-delay fuse or circuit breaker is recommended.

WARNING

NOTE: It is the personal responsibility and obligation of the product owner to have a proper outlet installed by a qualified

service technician.

To ensure sufficient clearance for water lines and airflow, allow minimum clearances of at least 1 in. (2.5 cm) at the sides and 4 in. (10 cm) behind the unit. Be sure to allow for wall, door, or floor moldings that may increase the required clearances.

FLOORING

y To minimize noise and vibration, the washer MUST be

installed on a solidly constructed floor.

y Allowable slope under the entire washer is a maximum 1

inch. difference from side to side or from front to back.

y Installing on carpeting and soft tile surfaces is not

recommended.

y Never install the washer on a platform or weakly supported

structure.

NOTE: The washer must be installed on firm flooring to minimize vibration during the spin cycle. Concrete flooring is best, but a wood floor is sufficient, provided it is built to FHA standards. The washer should not be installed on rugs or exposed to weather.

Do not use a drip pan as it can block the drawer. Using the drip pan may result in increased vibration and noise during operation.

y Two or more people are required when moving, unpacking, and

stacking the washer. Failure to follow this warning may result in

damage to property or serious bodily harm. y Store and install the washer where it will not be exposed to

weather or to temperatures below freezing. Failure to follow

this warning can cause serious injury, fire, electric shock, or

death. y Properly ground the washer to conform with all electric gov-

erning codes and ordinances. Failure to follow this warning can

cause serious injury, fire, electric shock, or death. y To reduce the risk of electric shock, do not install the washer in

humid spaces. Failure to follow this warning can cause serious

injury, fire, electric shock, or death. y To ensure proper air flow, do not block the large opening on the

bottom of the washer with carpeting or other materials. y Do not remove the ground prong. Do not use a 2-prong adapter

or 2-wire extension cord. Failure to follow these warnings can

cause serious injury, fire, electric shock, or death.

WARNING

50 1/2" (128 .3 cm)

52 3/3" (13 4 cm)

(20 in. [ 50.8 c m] additio nal

needed fo r servi ce)

29 3/4" (75 .6 cm)

32" (8 2.1 cm)

1”

(2.5 cm)

1”

(2.5 cm)

/16" (132 .9 cm)

/4" (137.8 cm)

27" (6 8.9 cm) 29" ( 73.7 cm)

MFL68267005_E.indd 8 16. 5. 16. 오후 3:43

ENGLISH

INSTALLATION INSTRUCTIONS

UNPACKING AND REMOVING SHIPPING MATERIAL

1. After removing the carton and shipping material, lift the washer off the foam base. Make sure the plastic tub support comes off with the base and is not stuck to the bottom of the washer.

Plastic Tub Support

Carton Base

If you must lay the washer down to remove the base packaging materials, always protect the side of the washer and lay it carefully on its side. DO NOT lay the washer on its front or back.

2. Save the foam block for future use. If the washer must be moved in the future, the foam block will help prevent damage to the washer during transportation. NOTE: To prevent damage, do not remove the foam block until the washer is at the final location.

3. Turn the top cover about 180 degrees. Cover the upper hole with the top cover and install 4 short screws (included in packing box) to fix it in place.

Top cover

Short s crews

y The top cover must be installed to avoid the risk of

electric shock or short circuit. Failure to do so can

cause serious injury, fire, electric shock or death.

WARNING

4. Make sure the leveling legs on the front-loading washer are fully retracted before stacking it on top of the pedestal washer. Position the appliance on top of the pedestal washer.

Washer legs

5. Make sure the holes on the pedestal washer align with the holes in the front-loading washer, then install 4 long screws (included in box) at each corner to securely attach the front- loading washer to the pedestal washer.

Long screws

6. Extend the legs of the front-loading washer slightly until it is snugged up against the pedestal washer.

TOOLS YOU WILL NEED

y Adjustable Pliers • Carpenter's Level

y Screwdriver

MFL68267005_E.indd 9 16. 5. 16. 오후 3:43

INSTALLATION INSTRUCTIONS

CONNECTING THE DRAIN HOSE WITH FULL-SIZE WASHER

1. Front-loading washer and pedestal washer with dryer.

Tie Strap

Wire Clamp

2. Front-loading washer and pedestal washer with hybrid dryer

Tie Strap

Wire Clamp

DETAIL VIEW OF DRAIN CONNECTOR CONNECTION

For narrow standpipes, insert hybrid dryer drain hose in center of drain connector. DO NOT insert dryer drain hose further than 1 inch (2.5 cm). Use tie straps to keep hoses in place.

OVERVIEW OF CONNECTIONS

CONNECTING THE WATER LINES WITH FULL-SIZE APPLIANCES

1. Front-loading washer and pedestal washer with dryer.

Cold

Hot

Short inlet hose

2. Front-loading washer and pedestal washer with Turbo Steam dryer

Cold

Hot

Short inlet hose

Required for water inlet

Item Qty

Y-C onnector 2

Short inlet hose 2

Long inlet hose 4

long inlet h oses sold se parately

Required for water inlet

Item Qty

Y-C onnector 3

Short inlet hose 3

Long inlet hose 5

long inlet h oses sold se parately

Drain hose

Wire Clamp

Drain Y Connec tor

MFL68267005_E.indd 10 16. 5. 16. 오후 3:43

ENGLISH

INSTALLATION INSTRUCTIONS

CONNECTING THE WATER LINES

NOTE:

• For your safety, and for extended product life, use high-quality LG components. LG is not responsible for product malfunction or damage caused by the use of separately purchased nonLG parts.

• Do not reuse old hoses. Use only new hoses when installing the washing machine. Old hoses could leak or burst causing flooding and property damage. Contact LG Customer Ser vice for assistance in buying hoses: 1-800-243-0000.

• Do not use flood-preventing hoses with auto shutoff devices. The devices can be tripped during fill and prevent the machine from filling properly.

1. Check the fittings and seals.

Inspect the threaded fitting on each hose and make sure there is a rubber seal in place in both ends of each hose to prevent leaking.

Rubber Seal

Water Hose

(to tap)

Water Hose

(to water inlet

on washer)

Rubber Seal

2. Connect the water supply hoses.

Connect the water supply hoses to the HOT and COLD water faucets tightly by hand and then tighten another 2/3 turn with pliers. Connect the blue hose to a cold water faucet and the red hose to a hot water faucet.

yDo not overtighten.

Damage to the coupling

can result.

WARNING

Water Faucet

3. Flush out the inlet hoses.

After connecting the inlet hoses to the water faucets, turn on the water faucets to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let water drain into a bucket, and check the water temperature to make sure you've connected the hoses to the correct faucets.

4. Attach the water lines to the back of the washer.

Attach the hot water line to the provided inlet Y-connector and attach the short water line from the Y-connector to the full-size washer inlet. Then attach the long water line from the Y-connector to the pedestal washer inlet. Repeat with the cold water connections. Tighten the fittings securely. Turn on both faucets all the way and check for leaks at both ends of the hoses.

yDo not overtighten the hoses or crossthread

the hose fittings.

Overtightening or crossthreading can damage the valves, resulting in leaking and property damage.

WARNING

NOTE:

• Periodically check the hoses for cracks, leaks, and wear, and replace the hoses ever y five years. Do not stretch the water hoses intentionally, and make sure that they are not pinched, crushed or kinked by other objects.

• Water supply pressure must be between 20 psi and 120 psi (138 –827 kPa). If the water supply pressure is more than 120 psi, a pressure reducing valve must be installed.

• To provide optimum washing performance, set the hot water temperature at 120° –135°F (48°– 57°C) and the cold at 60°F (15°C).

• Never install or store the washer in a location subject to freezing temperatures. Damage to the water lines and internal mechanisms of the washer can result. If the washer was exposed to freezing temperatures prior to installation, allow it to stand at room temperature for several hours before use and check for leaks prior to operation.

Hot water inlet

Cold water inlet

MFL68267005_E.indd 11 16. 5. 16. 오후 3:43

INSTALLATION INSTRUCTIONS

CONNECTING THE DRAIN HOSE

y The drain hose should always be properly secured.

Failure to properly secure the drain hose can result in flooding and property damage.

y The drain must be installed in accordance with any

applicable local codes and regulations.

y Make sure that the drain hose is not stretched,

pinched, crushed, or kinked.

CONNECTING THE PEDESTAL WASHER DRAIN HOSE

1. Insert the band clamp (included in packing box) on to the drain hose elbow.

Band Clamp

2. With the hose leading up from the elbow, insert

the elbow onto the drain outlet on the back of the pedestal washer.

3. Adjust the band clamp with pliers to keep the

hose securely in place and prevent leaking.

Band Clamp

USING THE DRAIN CONNECTOR

y Connect the drain hose of the full-size washer and the

pedestal washer to the drain connector. Insert the included wire hose clamps on to the ends of the two drain hoses. Push the drain hoses firmly onto the drain connector. Adjust the wire hose clamps to prevent the hoses from coming loose or leaking. Failure to do so could result in flooding. Use of the drain connector helps avoid siphoning, odors, or improper draining.

OPTION 1: STANDPIPE

Bend the outlet end of the drain hoses to form a U shape. Insert the end of the drain connector into the drain.

Use the three tie straps included with the installation materials in the foam block in the tub to secure the drain hoses to each other and to the drain. See Over view of Connections for details. If your drain is a standpipe, fasten the drain hoses to the standpipe with the tie strap provided.

NOTE:

y Normal height of the end of the hoses should be

approximately 35”~47” (90~120 cm) from the floor.

y Do not install the end of the drain hoses lower than 29".

(73.7 cm) or higher than 96 in. (243.8 cm) above the bottom of the washer or more than 60 in. (152.4 cm) away from the washer.

y Never create an airtight seal between the hoses and the

drain with tape or other means. If no air gap is present, water can be siphoned out of the tub resulting in poor wash/rinse performance or clothing damage.

y For best performance, if there is an additional drain hose

from a hybrid dryer, place the drain hose in the standpipe next to the drain connector.

y If the standpipe is too narrow to fit both the drain connector

and the dryer drain hose, the dr yer drain hose may be inserted up to 3/4 in. into the center channel of the drain connector. See Overview of Connections, page 10.

OPTION 2: LAUNDRY TUB

Bend the end of the drain hoses to the desired shape and support them on the edge of the laundry tub. Use the tie strap to secure the drain hoses in place.

NOTE:

y Do not use this drain hose with a floor drain. The

end of the drain hose must be at least 29 inches above the floor for proper draining to occur.

Drain Hose

y Inserting the dryer drain hose farther than 3/4 in.

will cause leaking and improper draining.

CAUTION

Drain Hose

Drain hose

Wire Clamp

Drain Y Connector

MFL68267005_E.indd 12 16. 5. 16. 오후 3:43

ENGLISH

INSTALLATION INSTRUCTIONS

LEVELING THE WASHING MACHINE

The washer tub of your new washing machine spins at very high speeds. To minimize vibration, noise, and unwanted movement, the floor must be perfectly level and solid.

• Check that the washing machine is level.

- Check for levelness by rocking the top edges of the washing machine or placing a level on the washing machine. The slope beneath the washing machine must not exceed 1/2", and all four leveling feet must rest firmly on the floor.

Level

1/2"

• Turn the lower leveling feet clockwise to level the

washing machine.

- Turning the lower leveling feet clockwise raises the washing machine.

Raise

• Turn the locknuts counterclockwise and tighten them when the washing machine is level.

Tighten a ll 4 lock

nuts securely usin g

the wrenc h.

• Check again that the washing machine is level.

- Push or rock the top edges of the washing machine gently to make sure that the washing machine does not rock.

- If the washing machine rocks, repeat steps 1 to

yUsing the washing machine without leveling

may cause it to malfunction, producing excess vibration and noise.

yWhen stacking the full-size washing machine

on the pedestal washer, use the leveling feet on the pedestal washer to level both. The full-size washing machine´s leveling feet should be minimized and the locknuts turned counterclockwise to secure them.

yUse the leveling feet only when you level the

washing machine.

If you raise the leveling feet unnecessarily, it may cause abnormal vibration of the washing machine.

WARNING

USING NON-SKID PADS (OPTIONAL)

If you install the washing machine on a slippery surface, it may move because of excessive vibration. Incorrect leveling may cause malfunction through noise and vibration. If this occurs, lay the non-skid pads under the leveling feet and adjust the level.

• Clean the floor to attach the non- skid pads.

- Use a dry rag to remove foreign objects or moisture. If moisture remains, the non-skid pads may slip.

• Adjust the level after placing the washing machine in the installation area.

• Place the adhesive side of the non-skid pad on the floor.

- It is most effective to install the non-skid pads

under the front legs. If it is hard to place the pads under the front legs, place them under the back legs.

Remove backin g

This side up

Adhesive side

• Check again that the washing machine is level.

- Push or rock the top edges of the washing machine gently to make sure that the washing machine does not rock. If the washing machine rocks, level the washing machine again.

MFL68267005_E.indd 13 16. 5. 16. 오후 3:43

INSTALLATION INSTRUCTIONS

CONNECTING TO THE POWER SUPPLY

The washer should be plugged into a 120 VAC, 60 Hz, 3- prong (grounded) outlet. Plug in the washer.

yThe power outlet must be within 60 inches

(1.5 m) of either side of the washer.

yThe appliance and outlet must be positioned so

that the plug is easily accessible.

yPlug the washer into an electrical outlet which

has a voltage rating that matches the rating plate. For best performance, plug the washer into its own individual outlet.

This helps prevent overloading house wiring circuits which could cause a fire hazard from overheated wires. If necessary, use a new, UL-listed 3-prong adapter or 3-wire extension cord with a 3-prong (grounding) plug rated at no less than the branch circuit. Do not use an extension cord longer than three feet. Failure to follow these warnings can cause serious injury, fire, electric shock, or death.

yThe outlet must be grounded in accordance

with current wiring codes and regulations.

yTime-delay fuse or circuit breaker is

recommended.

yIt is the personal responsibility and obligation

of the product owner to have a proper outlet installed by a qualified electrician.

yDo not use a worn or damaged power cord or

power plug. Replace or repair it immediately.

Failure to do so may result in death, fire, electric shock, or malfunction.

yDo not modify the power cord and take care

not to damage it when installing or moving the washing machine.

Failure to do so may result in

death, fire, electric shock, or malfunction.

yMake sure that the washing machine is

grounded.

yConnect this washing machine to a grounded

outlet conforming to the rating prior to use.

Failure to do so may result in fire, electric shock, or malfunction.

yDo not damage or cut off the ground prong of

the power cord.

Doing so may cause death,

fire, electric shock, or product malfunction.

WARNING

yImproper connection of the equipment

grounding conductor can result in risk of electric shock. Check with a qualified electrician or service technician if there is doubt that the outlet is properly grounded. Do not modify the plug provided with the appliance. Never damage or cut off the ground prong of the power cord. If the cord does not fit the outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can result in serious injury, fire, electric shock, or death.

WARNING

MFL68267005_E.indd 14 16. 5. 16. 오후 3:43

ENGLISH

INSTALLATION INSTRUCTIONS

FABRIC CARE LABELS

Many ar ticles of clothing include a fabric care label. Using the chart below, adjust the cycle and option selections to care for your clothing according to the manufacturer’s recommendations.

Fabric Care Labels

LOADING THE WASHER

y Check all pockets to make sure that they are empt y.

Items such as clips, matches, pens, coins, and keys can damage both the washer and the clothes.

y Close zippers, hooks, and drawstrings to prevent

these items from snagging or tangling on other

clothes. y Pretreat heavily stained areas for best results. y To prevent an out-of-balance load, do not wash single

items. Add one or two similar items to the load.

Large, bulky items, such as a blanket, comforter, or

bedspread, should be washed individually in the full-

size washer. y The washer will not fill or operate with the lid open. y Don't overload the tub. Clothes should fit loosely in

the tub under the maximum fill line. Loading clothes

over the fill line may result in damage to clothing and

the washer.

SORTING WASH LOADS

GROUPING SIMILAR ITEMS

For the best washing results, and to reduce the possibility of damage to clothing, sort the clothing into loads that are made up of similar items.

Mixing different fabric types and/or soil levels can result in poor wash performance, color transfer, discoloration, fabric damage or linting. Sort fabrics into groups as described below.

COLORS

Sort articles by color. Wash dark clothes together in a separate load from light colors or whites. Mixing dark clothes with light clothes can result in dye transfer or discoloration of the lighter clothes.

SOIL LEVEL

Wash heavily soiled clothing in the full -sized washer. Washing lightly soiled clothing in the same load with heavily soiled clothing could result in poor wash performance for the lightly soiled clothing. The pedestal washer is optimized for use with lightly soiled and delicate items.

FABRIC TYPE

Do not mix delicate items with heavier or sturdier fabrics. Washing heavier fabrics in a delicate load can result in poor wash performance for the heavier fabrics and possible damage to the delicate items.

LINT TYPE

Some fabrics attract and bind lint to them while others give off lint in the laundry process. Avoid mixing these lint collectors and lint producers in the same load. Mixing these fabrics results in pilling and linting on the lint collectors. (For example, lint collector – knit sweater; lint producer – terry cloth towels.)

SORT LAUNDRY…

By Colors By Soil By Fabric By Lint

White Heavy Delicates Lint Producer Lights Normal Easy Care Line Collector Darks Light Sturdy

y Do not load items higher than the top edge of the

tub. Failure to follow this caution can result in leak-

age or damage to fabrics.

y Use the Bedding cycle in the full-size washer for

buoyant or nonabsorbent items such as pillows or comforters. Refer to owner's manual included with

washing machine. Failure to follow this caution can result in leakage.

CAUTION

y Close the lid until it clicks before sliding the drawer

in to begin the cycle.

y Press to open the lid. Do not force the lid of the

washing machine open. Doing so may damage the machine.

CAUTION

MFL68267005_E.indd 15 16. 5. 16. 오후 3:43

INSTALLATION INSTRUCTIONS

DETERGENT AND DISPENSER USE

A WORD ABOUT DETERGENTS

High- Efficiency (HE) detergents produce fewer suds, dissolve more efficiently to improve washing and rinsing performance, and help to keep the interior of your washer clean. Using detergent that is not HE may cause oversudsing and unsatisfactory per formance which could result in error codes, cycle failure, and machine damage.

This machine requires very little detergent. For proper wash performance, always use the dispenser and measuring device provided with the machine.

The dispenser holds a maximum of 2 teaspoons (10g/10cc) of HE detergent. Most normal loads require only 1 teaspoon (5g/5cc) of detergent, or filling the dispenser to the halfway line.

Do not use a full detergent pod in the pedestal washer. Using too much detergent may cause oversudsing and unsatisfactory performance. Reduce detergent amount or add an extra rinse if detergent residue is left on fabrics. To add an extra rinse, press the Extra Rinse button.

DESIGNED TO USE ONLY HIGH-EFFICIENCY (HE)

DETERGENT

IMPORTANT: Your washing machine is designed for use with only High-Efficiency (HE) detergents. HE detergents are formulated specifically for HighEfficiency washers and contain suds-reducing agents. Always look for the HE symbol when purchasing detergent.

IMPORTANT: Not all detergents are the same. Pay careful attention to the amount of detergent used to avoid oversudsing, poor rinsing and detergent buildup in clothing, and residue buildup that can contribute to odors in the machine. The maximum measure on the dispenser provided should only be used for very large loads. Using too much detergent can result in detergent buildup in the washer and in your clothes.

Always measure the detergent amount. While HE detergents are designed for this type of washing machine, be careful when measuring the detergent. For most normal loads, no more than 1 teaspoon or half the provided dispenser/measuring device of HE detergent should be used.

Max load

(2 tsp., 10 g)

Normal

(1 tsp., 5 g)

NOTE:

y Extra care must be exercised when using 2X and

3X concentrated detergents because even a little bit extra can contribute to the problems mentioned above.

y Detergents designated as HE compatible may not

provide optimal results.

USING THE DETERGENT

1. Slide the drawer open, open the lid, and add the garments into the tub.

2. Measure the detergent with the detergent dispenser and pour it into the tub.

3. Close the lid, slide the drawer closed, and press the START/PAUSE button to start the cycle.

NOTE: Liquid chlorine bleach or powdered bleach cannot be used in the pedestal washer. To use bleach, use the full-size washer and follow instructions in the owner's manual for that machine.

IMPORTANT: Do not place or store laundry products, such as detergent, bleach, or liquid fabric softener, on top of your washer or dryer. Wipe up any spills immediately. These products can damage the finish and controls.

USING BLEACH

Do not use liquid chlorine bleach or powdered bleach in the pedestal washer. To bleach items, use the full-size washer and follow the instructions in the owner's manual included with that machine.

USING FABRIC SOFTENER

The pedestal washer chimes repeatedly before the final rinse so liquid fabric softener can be added to the load, if desired. Use 1/4 the amount of softener recommended by the manufacturer for a normal load.

When the machine chimes, press Start/Pause to pause the cycle.

1. Slide the drawer open, open the lid, and add the liquid fabric softener to the detergent dispenser. The softener can also be diluted with water and added directly into the tub. Do not pour undiluted softener directly onto clothing because it may stain fabrics.

2. Close the lid, slide the drawer closed, and press Start /Pause to restart the cycle.

3. To disable or enable the fabric softener alert, press and hold the Warm Water and Extra Rinse buttons at the same time for three seconds.

If you miss the softener add point:

1. Press the Power button to interrupt the cycle.

2. Sele ct the Rinse+Spin cy cle and press the Start button to start the cycle.

3. Add the fabric soften er at the chimes following instructions above.

MFL68267005_E.indd 16 16. 5. 16. 오후 3:43

ENGLISH

HOW TO USE

CONTROL PANEL FEATURES

POWER (ON/OFF) BUTTON

Press to turn the washer ON. Press again to turn the washer OFF. Pressing the POWER button during a cycle will cancel that cycle and any load settings will be lost. The drawer will unlock after a brief pause.

NOTE:

• When the Power button is pressed, the Normal cycle is selected by default. To modify the default options or choose another cycle, press the cycle selector (v) button to illuminate the display.

CYCLE SELECTOR BUTTON

Press this button to select the desired cycle. Once the desired cycle has been selected, the standard presets will appear in the display. These settings can be adjusted using the cycle setting buttons any time before starting the cycle.

NOTE: To protect your clothing, not all settings are available on all cycle selections.

START/PAUSE BUTTON

Press this button to start the selected cycle. If the washer is running, use this button to pause the cycle without losing the current settings.

NOTE: If you do not press the START/ PAUSE button within 4 minutes of selecting a cycle, the washer automatically turns OFF and all cycle settings are lost.

OPTION BUTTONS

Use these buttons to adjust the settings for the selected cycle. The setting lights above the buttons illuminate to show the current selection.

TIME AND STATUS DISPLAY

The display shows the cycle status and estimated time remaining.

REMOTE CONTROL SENSOR

Use the remote to set the controls without bending down to reach the control panel.

HOW TO USE

A B

WD205C*

WD100C*/WD200C*

MFL68267005_E.indd 17 16. 5. 16. 오후 3:43

HOW TO USE

TIME AND STATUS DISPLAY

The time and status display shows the estimated time remaining and cycle progress.

DRAWER LOCK INDICATOR

The DR AWER LOCK indicator will illuminate once a cycle has started. The indicator light will stay on until the cycle is paused, stopped or has finished.

CHILD LOCK

When the Child Lock function is activated, the LED lights up. When the Child Lock function is set, except for the POWER button, the other functions are disabled. Once the Child Lock function is disabled, the LED will turn off.

CYCLE STATUS INDICATOR

These LEDs will illuminate when a cycle is selected to indicate which stages will run. When a cycle is running, the LED for the active stage will blink, and the LEDs for the remaining stages will remain steady. Once a stage is complete, the LED will turn off. If a cycle is paused, the active stage LED will stop blinking.

ESTIMATED TIME REMAINING

When a cycle is selected, the default time for that cycle is displayed. This time will change as modifiers or options are selected.

NOTE: The time shown is only an estimate. This time is based on normal operating conditions. Several external factors (load size, room temperature, incoming water temperature, water pressure, etc.) can affect the actual time.

LID OPEN

If the lid is open, the LED blinks. Close the lid, shut the drawer, and press START/PAUSE to start the cycle. Some models do not have the LID OPEN indicator. If the lid is closed and the lid error message is displayed, call for service.

A E B

A B

MFL68267005_E.indd 18 16. 5. 16. 오후 3:43

ENGLISH

HOW TO USE

OPERATING THE WASHER

yTo reduce the risk of fire, electric shock, or injury to persons,

read the IMPORTANT SAFETY

INSTRUCTIONS before operating this appliance.

WARNING

SORT LAUNDRY AND LOAD THE WASHER

Sort laundry by fabric type, soil level, color and load size, as needed. Open the lid and load items into the washer.

CLEANING PRODUCTS

Measure High-Efficiency (HE) detergent with the dispenser and pour it into the washer.

TURN ON THE WASHER

Press the POWER button to turn ON the washer. The cycle lights illuminate and a chime sounds.

SELECT A CYCLE

Press the cycle selector button to select the desired cycle. When you press Power the Normal cycle is selected by default. To modify the options, press the cycle selector button to activate the display. The optional remote control can also be used to select the desired cycle.

ADJUST SETTINGS

Default settings for the selected cycle can now be changed, if desired, using the option buttons.

NOTE: Not all options are available on all cycles. A different chime will sound and the light will not turn on if the selection is not allowed.

BEGIN CYCLE

Press down gently on the lid handle until it clicks and slide the drawer closed. Press START/PAUSE to begin the cycle. The drawer locks, and the washer starts the cycle. If the START/PAUSE button is not pressed within 4 minutes, the washer shuts off and all settings are lost.

ADD FABRIC SOFTENER

A repeated chime sounds before the final rinse. When the chime sounds, pause the machine and add liquid fabric softener within three minutes, if desired.

END OF CYCLE

When the cycle is finished, a melody will sound. Immediately remove the clothing from the washer to reduce wrinkling.

MFL68267005_E.indd 19 16. 5. 16. 오후 3:43

HOW TO USE

CYCLE GUIDE

The cycle guide below shows the default settings, available options and recommended fabric types for each cycle. Allowable modifier adjustments are shown below the default setting for each cycle.

Cycle Cycle Use

Est. Time

Wash Temp. Extra Rinse Child Lock

Normal

Lightly soiled cotton, t-shirts, towels, jeans, mixed loads.

39 ~ 116

Warm

 

Cold

Intimates

Lingerie, underwear, pajamas, delicates, etc.

47 ~ 103

Warm

 

Cold

Hand Wash

Sweaters, knits, items labeled hand-washable, etc.

47 ~ 103

Warm

 

Cold

Active Wear

Specially designed/treated performance clothing.

43 ~ 103

Warm

 

Cold

Rinse + Spin

Pre-treats stains, or rinses off soap and drains tub

8 ~ 90

 

Tub Clean Cleans tub and removes mildewy odor. 58

Warm



Cold

Active Wear

Use this cycle to wash performance garments that are specially designed and treated for sports.

Rinse + Spin

Select this option to rinse and spin a load separately from a regular cycle. This can be helpful in preventing fresh stains from setting in fabrics.

Spin Only Cycle

To activate a spin only cycle, select the Rinse+Spin cycle. Then press the Extra Rinse button six times or until the display shows 8 and the Rinse icon is no longer illuminated on the panel.

Tub Clean

Use this c ycle to c lean the tub of the washing machine.

WASH CYCLES

Wa s h cycl e s a r e des i gned for th e b e st w a sh performance for each type of load. Select the cycle that best matches the load contents for maximum wa sh p erfo rman c e a nd f abri c car e. Press the cycle selector button to select the desired cycle. When you select a wash cycle , the light for the corresponding wash cycle will turn on. See page 19,

OPERATING THE WASHER

, for more details on

operating methods.

Normal

Use this cycle to wash lightly soiled normal items, except delicate fabrics such as wool or silk.

NOTE:

Pressing the START/PAUSE button without selecting a cycle will cause the NORMAL cycle to begin immediately using the default settings.

Intimates

Use this cyc le to wash delicat e ite ms such as lingerie or sheer and lacy clothes which could easily be damaged in a normal cycle. This cycle is not for silk items.

Hand Wash

Use this cycle to wash shrinkable woolen or handwashable items requiring delicate care. Only wash woolen items that are labeled machine wash or hand wash.

Key

Default



Available o ption

MFL68267005_E.indd 20 16. 5. 16. 오후 3:43

ENGLISH

HOW TO USE

OPTIONS

After selecting a cycle, select additional features for the load.

NOTE:

y To protect your garments, not every feature is

available with every cycle.

y If the START/PAUSE button is not pressed within

4 minutes to start the cycle, the control will shut off and all settings will be lost.

WARM WATER

The warm water option is selected by default on the Normal and Intimates cycles. It can be deselected by pressing the Warm Water button. The water temperature cannot be set on the Rinse + Spin.

EXTRA RINSE

This option add an extra rinse to the selected cycle. Use this option to help ensure the removal of detergent from fabrics. A chime sounds repeatedly before the final rinse so the machine can be paused and liquid fabric softener added, if desired.

NOTE:

y You cannot select the Extra Rinse option with the

Tub Clean cycle.

y A chime sounds repeatedly about 20 second

before the final rinse so the machine can be paused and liquid fabric softener added, if desired.

CHILD LOCK

Use this option to disable the controls. This feature can prevent children from changing cycles or operating the machine. Once the Child Lock is set, it must be deactivated before any controls, except the Power button, can be used. Once the washer has shut off, the Power button will allow the machine to be turned ON, but the controls will still be locked. When the controls are locked, CL will display alternately with the estimated time remaining. Press and hold the Extra Rinse button for 3 seconds to activate or deactivate Child Lock.

NOTE: Once the controls are locked, they must be manually unlocked to restore operation.

MFL68267005_E.indd 21 16. 5. 16. 오후 3:43

+ 47 hidden pages