LG WCP300 User Manual

LG Electronics

ITEM

Description

Input / Output

DC 5V, 1800mA / DC 5V, 1000mA

Charging time

< 4 hours (Based on 1500mAh Battery)

Operation temperature

-10°C ~ 60°C

Dimension

Φ 69.8mm(Dia.) X 12.2mm(H) , 60g

Function

WCP-300 Status

Charging status LED

Operating

Power supply disconnected

Off

Power supply connected

Solid Orange

Charging

Flickering Green

Charging complete

Solid Green

Charging Stopped

(Wired phone charger is

attached at the same time)

Solid Orange

Error

Charging Stopped

(Charger or phone is

in error condition)

Solid Red

Wireless Charging Pad

WCP-300 User Manual

Rev0.1

Note: For optimal performance and to prevent

any damage to, or misuse of the WCP-300,

please read all the information carefully

before using the WCP-300.

Any modifications or changes to this manual due to

typographical errors or inaccuracies of stated information

shall only be made by LG Electronics Inc..

Included in Package

WCP-300

(Wireless Charger)

Description of parts

Charging Status

LED Indicator

Power Supply Warranty Card User Manual

Charging Area

How to use

Charging

- When the power supply is connected, the wireless charging pad (WCP-300) will turn on. The Charging Status LED Indicator will show a solid orange color light.

- When a wireless charging enabled device is placed in the correct position, an activation Charging indicator will change from solid orange to flickering green.

- When charging is completed, the charging indicator will show a solid green light.

- Do not drop the Wireless charging pad from high places.

- Do not modify, repair, or take the Wireless charging pad apart.

- Do not clean with water alcohol or benzene.

- Keep the Wireless charging pad away from humidity & dust.

- Do not place heavy objects on the Wireless charging pad.

FCC NOTICE TO USERS: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID: BEJWCP300

Safety Instructions LED display

- When disconnecting the power supply, always remove with the plug, do not pull the wire by itself.

- Never handle the power plug with wet hands, as this could cause fire or electric

shock.

- Refer servicing to qualified personnel only.

- Do not open the housing

- Do not twist or pinch the power supply cord. If the plugs or power supply cords need to be replaced, ensure that they comply with the manufacturer’s recommendation.

- Unplug the device during lighting storms and when unused for extended periods of time.

When using an electrical device, especially when children are present, basic safety precautions should always be followed, including the following:

DANGER to reduce the risk of electric shock

- Always unplug the device from the electrical outlet before cleaning.

- Do not reach for a device that has fallen into water. Unplug it immediately.

- Do not place or store device where it can fall or be pulled into a tub or sink.

- Do not place in or drop into water or other liquid.

WARNING to reduce the risk of burns, fire, electric shock or injury to persons

- Do not use with extension cord.

- Children should be closely supervised to ensure that they do not play with the

device.

- Use this device only for its intended use as described in this manual. Do not use with unauthorized accessories of devices.

- Never operate this device if it has a damaged cord, plug, cable or housing. If it is not working properly, if it has been dropped or damaged, return it to the LG Service Center for examination and repair.

- Keep cord away from heated surfaces.

- This device is designed for indoor use only. Do not use outdoors.

- Only set on dry surfaces. Do not place on surface wet from water or cleaning solvents.