LG WB1NB7 User Manual
User Manual
Product Name : Bluetooth 4.2 Module
Model Name : WB1NB7 (TWBU-Y303D)
The information contained herein is the exclusive property of LG Innotek
and shall not be distributed, reproduced or disclosed in whole or no in part
without prior written permission of LG Innotek.
Reg. Date : 2016. 09. 28
User Manual
Rev. No. : 1 . 0
Rev. Date :
Model Name : WB1NB7(TWBU-Y303D)
Page :
Table of Contents
No Description Page
1. Features …………….…………………………………………………....…………... 2
2. Module Photo …..……………………………………………………….…………… 2
3. Block Diagram .. ……………………………………………………………………… 3
4. Storage Conditions ….……………………………………………………………….. 4
5. Operating Conditions ….……………..……………………………………….……... 4
6. Interface Specification ……………..………………………………………….……... 5
7. Pin Description ………..………………………………………………………………. 6
8. Outline Drawing …………………………………………………………………….. 7
1 / 9
9. Packing Information ………………………………………………………….……… 8
Copyrightⓒ. 2016. All Rights Reserved.
Reg. Date : 2016. 09. 28
User Manual
Rev. No. : 1 . 0
Rev. Date :
Model Name : WB1NB7(TWBU-Y303D)
1. Features
- Complied with Bluetooth 4.2 specification with EDR function
- Internal printed antenna on PCB
- UART with maximum rate of 4Mbps interface
- 12pin SMD connector (connected with FFC)
- Size 34 x 19 x 2.9 mm
- Applied Airoha AB1520 for Main chipset
- RoHS compliant
2. Module Photo
< TOP View > < Bottom View >
Page :
2 / 9
Copyrightⓒ. 2016. All Rights Reserved.
Reg. Date : 2016. 09. 28
User Manual
Rev. No. : 1 . 0
Rev. Date :
4. Storage Conditions
Parameter Min. Max. Unit
Storage Temperature -10 +80
Storage Humidity (@ 40℃)
Caution : The specifications above the Table define levels at which permanent damage
to the device can occur. Function operation is not guaranteed under these conditions.
Operating at absolute maximum conditions for extend periods can adversely affect the
long-term reliability of the device.
• Other conditions
1) Do not use or store modules in the corrosive atmosphere, especially where chloride
Model Name : WB1NB7(TWBU-Y303D)
- 90 %
Page :
4 / 9
℃
gas, sulfide gas, acid, alkali, salt or the like are contained.
Also, avoid exposure to moisture.
2) Store the modules where the temperature
and relative humidity do not exceed 5 to 40℃ and 20 to 60%.
5. Operating Conditions
Parameter Min Typ Max Unit
Ambient Temperature 0 - +60
Operating Humidity (40℃)
℃
- - 85 %
Supply Voltage 3.15 3.3 3.45 Vdc
Copyrightⓒ. 2016. All Rights Reserved.
Loading...