LG W2046SW User Manual

User’s Guide

Model No:

W1946*W, W1946*MW,
W2046*W, W2246*W,
W2246*MW, W2346*W

W1946T
W2046T
W2246T
W2346T
W1946S
W2046S
W2246S

W2346S

Make sure to read the Important Precautions before using the

product. Keep the User's Guide(CD) in an accessible place for future
reference.

See the label attached on the product and give the information to

your dealer when you ask for service.

Important Precautions

This unit has been engineered and manufactured to ensure your personal safety,
however improper use may result in potential electrical shock or fire hazards. In
order to allow the proper operation of all safeguards incorporated in this display,
observe the following basic rules for its installation, use, and servicing.

On Safety

Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.

The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.

Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.

As long as this unit is connected to the AC wall outlet, it is not disconnected from
the AC power source even if the unit is turned off.

Do not Open the Display:

There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.

To Avoid Personal Injury :

Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the product screen.
It can cause injury to human, problem to product and damage the display.

To Prevent Fire or Hazards:

Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock.

1

Important Precautions

On Installation

Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.

Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.

Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.

Leaving a fixed image on the screen for a long time may cause damage to the
screen and cause image burn-in. Make sure to use a screen saver on the product.
Burn-in and related problems are not covered by the warranty on this product.

Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.

Make sure the panel faces forward and hold it with both hands to move. If you
drop the product, the damaged product can cause electric shock or fire. Contact
an authorized the service center for repair.

Avoid high temperatures and humidity.

2

Important Precautions

On Cleaning

Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display

screen because over-spraying may cause electrical shock.

When cleaning the product, unplug the power cord and scrub gently with a soft

cloth to prevent scratching. Do not clean with a wet cloth or spray water or
other liquids directly onto the product. An electric shock may occur. (Do not use
chemicals such as benzene, paint thinners or alcohol)

Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;

wipe in one direction only. Too much moisture may cause staining.

On Repacking

Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.

On Disposal (Only, Hg lamp used LCD Monitor)

The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of

your local authority.

3

Important Precautions

NOTE

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTRERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY

NOTE

This epuipment has been tested and found to comply with the limits for a class
B digital device,pursuant to part 15 of the FCC Rules.These limits are designed

to provide reasonable protection against harmful interference in a residential
installation.This equipment generates,uses and can radiate radio frequency

-Increase the separation between the equipment and the receiver.

-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

energy and,if not installed and used in accordance with the instructions,may

TO OPERATE THE EQUIPMENT.

-Consult the dealer or an experienced radio/TV technician for help.

cause harmful interference to radio communications.However,there is no
guarantee that interference will not occur in a particular installation.If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,the user is
encouraged to try to correct the interference by one or more of the following

measures:

-Reorient or relocate the receiving antenna.

A3

Accessories

!!! Thank for selecting LGE products !!!

Please make sure the following items are included with your
monitor. If any items are missing, contact your dealer.

User's Guide/Cards

DVI-D Signal Cable

(This feature is not available

in all countries.)

NOTE

This accessories may look different from those shown here.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite
cores to maintain standard compliance for the product.

Power Cord

15-pin D-Sub Signal Cable

(To set it up, this signal cable may

be attached to this product before

shipping out.)

4

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.

Connecting the stand

. Place the monitor with its front facing downward on a soft cloth.

1

2.

product in the correct direction as shown
in the picture. Make sure you push it

until you hear it “click”.

Stand Body

Assemble the Stand Body into the

Hinge Body

4

Tie down the base lock to perpendicularity direction.

.

Assemble the Stand Base(Front,

3.

Rear) into the Stand Body in the
correct direction.

Stand Body

5. Once assembled take the monitor up carefully and face the front side.

Stand Base

Important

This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.

5

Connecting the Display

Disassembling the stand

1. Put a cushion or soft cloth on aflat

surface.

2. Place the monitor face Down on

the cushion or soft cloth.

3. Change your lock on the product as it follows and turn it in the arrow direction.

..

If you can't release the stand base even the locking knob is at a release
position, Please push the indicated knob down and retry it.

6

Connecting the Display

Pull out the Stand to remove.

4.

5.

Pushing the PUSH button, Take the stand base from stand body.

Good Position Bad Position

Warning:

You can hurt your finger.

7

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor,
the computer system, and other attached devices is turned off.

Positioning your display

-After installation, adjust the angle as shown below.

1. Adjust the position of the panel in various ways for maximum comfort.

Tilt Range : -5˚~15˚

-5

15

Do not touch or press the screen when
adjusting the angle of the monitor.

When adjusting the angle of the screen, do
not put your finger(s) in between the head of
the monitor and the stand body. You can
hurt your finger(s).

ERGONOMIC

It is recommended that in order to maintain an ergonomic and comfortable viewing position,
the forward tilt angle of the monitor should not exceed 5 degrees.

8

Connecting the Display

Connecting with the PC

Before setting up the monitor, ensure that the power to the monitor, the computer

1.

system, and other attached devices is turned off.
Connect signal input cable and power cord in order, then tighten the screw

2.

of the signal cable.

A

Connect DVI-D(Digital signal) Cable

B

Connect D-sub(Analog signal) Cable

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

Varies according to model.

W1946T/W2046T/W2246T/W2346T

1

2

When using a D-Sub signal input cable connector
for Macintosh

Mac adapter :For Apple Macintosh use, a

separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2
row connector.

Wall-outlet type

B

DVI-D (This feature is not available in all countries.)

A

PC
PC

3. Press the power button on the front panel to turn the power on. When monitor power is

turned on, the 'Self Image Setting Function' is executed automatically.

(Only Analog Mode)

Power Button

NOTE

‘ Self Image Setting Function’? This function provides the user with optimal display

settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals.
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters,
screen flicker or tilted screen while using the device or after changing screen resolution, press
the AUTO/SET function button to improve resolution.

9

Connecting the Display

Connecting with the PC

1.

Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.

2.

Connect signal input cable and power cord in order, then tighten the screw
of the signal cable.

A

Connect D-sub(Analog signal) Cable

NOTE

This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.

Varies according to model.

W1946S/W2046S/W2246S/W2346S

1

2

When using a D-Sub signal input cable connector for
Macintosh

Mac adapter :For Apple Macintosh use, a

separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2
row connector.

Wall-outlet type

A

PC

3. Press the power button on the front panel to turn the power on. When monitor power is

turned on, the 'Self Image Setting Function' is executed automatically.

Power Button

NOTE

‘ Self Image Setting Function’? This function provides the user with optimal display

settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals.
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters,
screen flicker or tilted screen while using the device or after changing screen resolution, press
the AUTO/SET function button to improve resolution.

10

Control Panel Functions

Front Panel Controls

1 2

MENU Button

MODE Button

3

Use this button to enter or exit the On Screen Display.

OSD LOCKED/UNLOCKED

This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.

You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.

Use this button to enter F-ENGINE, ORIGINAL RATIO
menus.
For more information, refer to page 20.

5 64

11

Control Panel Functions

AUTO Button

INPUT Button

(SOURCE Hot key)

Use this button to enter a selection in the On Screen
Display.

AUTO IMAGE ADJUSTMENT

When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). (Only Analog Mode)

This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).

The best display mode is

W1946S/W1946T : 1360 x 768
W2046S/W2046T : 1600 x 900
W2246S/W2346S/W2246T/W2346T : 1920 x 1080

Use these buttons to select or adjust functions in the On

Screen Display.

When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub.

(Only W1946T/W2046T/W2246T/W2346T )

EXIT Button

Power Button &
Power Indicator

Use these buttons to exit the On Screen Display.

Use this button to turn the display on or off.

The power indicator stays white if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking white

12

On Screen Display (OSD) Control Adjustment

Screen Adjustment

Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system.
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.

To make adjustments in the On Screen Display, follow these steps:

Pops up the

menu screen

Press the MENU Button, then the main menu of the OSD appears.

1

To access a control, use the or Buttons. When the icon you want

2

becomes highlighted, press the AUTO/SET Button.

Use the / Buttons to adjust the image to the desired level.

3

Use the AUTO/SET Button to select other sub-menu items.

Press the MENU Button once to return to the main menu to select another

4

function. Press the MENU Button twice to exit from the OSD.

Move where

you want to

adjust

Select a

menu icon

Adjust the

status

Exit from the

menu screen.

13

On Screen Display(OSD) Selection and Adjustment

The following table indicates all the On Screen Display control, adjustment,
and setting menus.

: D-SUB(Analog signal) input

DSUB

: DVI-D(Digital signal) input

DVI-D

Main menu Sub-menu

PICTURE

BRIGHTNESS
CONTRAST
SHARPNESS

COLOR

COLOR TEMP

(PRESET / USER)

GAMMA

DISPLAY

HORIZONTAL
VERTICAL

CLOCK
PHASE

OTHERS

LANGUAGE
POWER INDICATOR

WHITE BALANCE

FACTORY RESET

F-ENGINE

MOVIE
INTERNET
NORMAL
DEMO

ORIGINAL
RATIO

WIDE
ORIGINAL

Supported input

DSUB
DVI-D

DSUB
DVI-D

DSUB

To adjust the brightness, contrast
and gamma of the screen

To customize the color of the
screen

To adjust the position of the
screen

DSUB

To improve the clarity and
stability of the screen

DSUB
DVI-D

DSUB

DSUB
DVI-D

DSUB

DVI-D

DSUB

DVI-D

To customize the screen status
for a user's operating
environment

To select or customize desired
image settings

To adjust the image size

Description

NOTE

The order of icons may differ depending on the model (14~24).

HDMI

14

On Screen Display(OSD) Selection and Adjustment

You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.

MONITOR SETUP

MONITOR SETUP

AUTO

AUTO

MENU

MENU

MODE AUTO INPUT EXIT

MODE AUTO INPUT EXIT

Press the MENU Button, then the main menu of the OSD appears.

Press the MENU Button, then the main menu of the OSD appears.

Menu Name

Icons

MENU

PICTURE

BRIGHTNESS

CONTRAST

SHARPNESS

100

70

EXIT

Sub­menus

5

Button

EXIT : Exit

: Adjust (Decrease/Increase)

SET : Select another sub-menu
: Restart to select sub-menu

NOTE

OSD (On Screen Display) menu languages on the monitor may differ from the manual.

Tip

15

On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

PICTURE

MENU PICTURE

BRIGHTNESS

CONTRAST

SHARPNESS

Exit : Exit

: Decrease
: Increase

: Select another sub-menu

COLOR

MENU COLOR

TEMP PRESET

COLOR

PRESET 6500K

RED
GREEN
BLUE

GAMMA

GAMMA 1

Exit : Exit

: Decrease
: Increase
: Select another sub-menu

100

70

5

EXIT

50
50
50

EXIT

BRIGHTNESS

CONTRAST

SHARPNESS

COLOR TEMP

PRESET

USER

To adjust the brightness of the screen.

To adjust the contrast of the screen.

To adjust the clearness of the screen.

Select the screen color.

• sRGB: Set the screen color to fit the
sRGB standard color
specification.

• 6500K: Slightly reddish white.

• 9300K: Slightly bluish white.

RED

Set your own red color levels.

GREEN

Set your own green color levels.

BLUE

Set your own blue color levels.

GAMMA

Set your own gamma value.
: -50 / 0 / 50
On the monitor, high gamma values
display whitish images and low gamma
values display blackish images.

16

On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

DISPLAY

W1946T/W2046T/W2246T/W2346T

MENU DISPLAY

HORIZONTAL

To move image left and right.

HORIZONTAL

VERTICAL
CLOCK
PHASE

DSUB 1024X768 60Hz

50

50

50

50

EXIT

W1946S/W2046S/W2246S/W2346S

MENU DISPLAY

HORIZONTAL

VERTICAL
CLOCK
PHASE

1024X768 60Hz

50

50

50

50

EXIT

Exit : Exit

: Decrease
: Increase

: Select another sub-menu

VERTICAL

CLOCK

PHASE

To move image up and down.

To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.

To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.

17

On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

OTHERS

MENU OTHERS

LANGUAGE ENGLISH

POWER INDICATOR
WHITE BALANCE
FACTORY RESET

Exit : Exit

: Decrease
: Increase

: Select another sub-menu

LANGUAGE

To choose the language in which the
control names are displayed.

ON
NO
NO

POWER
INDICATOR

Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.

EXIT

WHITE
BALANCE

If you set ON at any time, the power
indicator will automatically be turned on.

If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.

FACTORY
RESET

Restore all factory default settings except

"LANGUAGE."

Press the , buttons to reset immediately.

NOTE

If this does not improve the screen image, restore the factory default settings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog
signal.

18

On Screen Display(OSD) Selection and Adjustment

You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.

MONITOR SETUP

AUTO

MENU

MODE AUTO INPUT EXIT

Press the MENU Button, then the main menu of the OSD appears.Press the MENU Button, then the main menu of the OSD appears.

Menu Name

MENU

F ENGINE

Sub-

Icons

NORMAL MOVIE INTERNET DEMO

EXIT

menus

Button

EXIT : Exit

: Adjust (Decrease/Increase)

SET : Select another sub-menu
: Restart to select sub-menu

NOTE

OSD (On Screen Display) menu languages on the monitor may differ from the manual.

Tip

19

On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

F ENGINE

F ENGINE

MENU

NORMAL MOVIE INTERNET DEMO

NORMAL

EXIT

Select this when you want to use the product in
the most general using environment.

F ENGINE

MENU

NORMAL MOVIE INTERNET DEMO

F ENGINE

MENU

NORMAL MOVIE INTERNET DEMO

F ENGINE

MENU

NORMAL MOVIE INTERNET DEMO

EXIT

EXIT

MOVIE

INTERNET

DEMO

Select this when you are watching a video or
movie.

Select this when you are working on the
document (Word etc.)

This is used for advertising in the store. The screen
will be divided to show the standard mode on the
left and video mode on the right so that the
consumers can check the difference after applying
the video mode.

Exit : Exit

: Move

: Select another sub-menu

EXIT

20

On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

ORIGINAL RATIO

MENU

ORIGINAL RATIO

FULL

WIDE ORIGINAL

WIDE

EXIT

Switch to full screen mode
according to input image signal.

MENU

ORIGINAL RATIO

FULL

WIDE ORIGINAL

Exit : Exit

: Move

: Select another sub-menu

EXIT

ORIGINAL

Change the input image signal ratio to

4:3.

21

Troubleshooting

Check the following before calling for service.

No image appears

No image appears

● Is the power cord of the

display connected?

● Is the power indicator

light on?

● Is the power indicator

flickering?

● Do you see an "OUT OF

RANGE" message on
the screen?

● Do you see a "CHECK

SIGNAL CABLE"
message on the
screen?

•

Check and see if the power cord is connected
properly to the power outlet.

•

Press the Power button.

•

If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.

• Try to turn on the PC

•

This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.

•

This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.

.

Do you see a "OSD LOCKED" message on the screen?

●

Do you see “OSD

LOCKED” when you
push MENU button?

• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.

22

Troubleshooting

Display image is incorrect

● Display Position is

incorrect.

● On the screen

background, vertical
bars or stripes are
visible.

● Any horizontal noise

appearing in any
image or characters
are not clearly
portrayed.

•

Press the AUTO/SET button to automatically

adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.

•

Press the AUTO/SET button to automatically

adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.

•

Press the AUTO/SET button to automatically

adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.

•

Check Control Panel --> Display --> Settings

and adjust the display to the recommended

resolution or adjust the display image to the ideal

setting. Set the color setting higher than 24 bits

(true color).

IMPORTANT

Check Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be
blurred and the screen may be dimmed, truncated or biased. Make sure to select

the recommend resolution.
The setting method can differ by computer and O/S (Operation System),
and resolution mentioned above may not be supported by the video card
performance. In this case, please ask to the computer or the video card
manufacturer.

23

Troubleshooting

Display image is incorrect

● The screen color is

mono or abnormal.

● The screen blinks.

•

Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.

•

Make sure the video card is properly inserted in
the slot.

•

Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.

•

Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.

Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?

●

Have you installed the

display driver?

•

Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.

•

Make sure to check if the video card supports
Plug&Play function.

24

Specifications

W1946T

Display

Sync Input

Video Input

Resolution

Plug&Play

Power
Consumption

Dimensions

& Weight

18.5 inches (47.0 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :

0.300 x 0.300 mm (Pixel pitch)

Horizontal Freq.

Vertical Freq.
Input Form Separate Sync.

Signal Input 15 pin D-Sub Connector

Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital

Max VESA 1360 x 768 @60 Hz
Recommend VESA 1360 x 768 @60 Hz

DDC 2B(Digital), DDC2B(Anlaog)

On Mode
Sleep Mode ≤ 0.5 W

Off Mode ≤ 0.5 W

With Stand

Width 42.26 cm / 16.63 inches
Height 35.62 cm / 14.02 inches
Depth 16.99 cm / 8.35 inches

47.0

cm

Analog:30 - 83 kHz (Automatic)
Digital:30 - 61 kHz (Automatic)

56 - 75 Hz (Automatic)

DVI-D Connector (Digital)

25 W(Typ.)

:

Without Stand

Width 42.26 cm / 16.63 inches
Height 26.67 cm / 10.50 inches
Depth 6.04 cm / 2.37 inches

SOG (Sync On Green), Digital

Weight(excl. packing) 3.0 kg (6.66 lbs)

Range

Power Input

Environment
al Conditions

Stand Base

Power cord

NOTE

Information in this document is subject to change without notice.

Tilt : -5˚~15˚

AC 100-240V~ 50/60Hz 0.8A

Operating Conditions

Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type

25

Specifications

W1946S

Display

Sync Input

Video Input

Resolution

Plug&Play

Power
Consumption

Dimensions

& Weight

18.5 inches (47.0 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating

47.0

Visible diagonal size :

0.300 x 0.300 mm (Pixel pitch)

Horizontal Freq. 30 - 83 kHz (Automatic)

Vertical Freq. 56 - 75 Hz (Automatic)

Input Form Separate Sync.

Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)

Max VESA 1360 x 768 @60 Hz
Recommend VESA 1360 x 768 @60 Hz

DDC 2B

On Mode
Sleep Mode ≤ 0.5 W

Off Mode ≤ 0.5 W

With Stand

Width 42.26 cm / 16.63 inches
Height 35.62 cm / 14.02 inches
Depth 16.99 cm / 8.35 inches

cm

SOG (Sync On Green)

25 W(Typ.)

:

Without Stand

Width 42.26 cm / 16.63 inches
Height 26.67 cm / 10.50 inches
Depth 6.04 cm / 2.37 inches

Weight(excl. packing)

Range

Power Input

Environment
al Conditions

Stand Base

Power cord

NOTE

Information in this document is subject to change without notice.

Tilt : -5˚~15˚

AC 100-240V~ 50/60Hz 0.8A

Operating Conditions

Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type

3.0 kg (6.66 lbs)

26

Specifications

W2046T

Display

Sync Input

Video Input

Resolution

Plug&Play

Power
Consumption

Dimensions

& Weight

20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating

50.8

Visible diagonal size :

0.2766 x 0.2766 mm (Pixel pitch)

Horizontal Freq. 30 - 83 kHz (Automatic)

Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.

Signal Input 15 pin D-Sub Connector

Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital

Max VESA 1600 x 900 @60 Hz
Recommend VESA 1600 x 900 @60 Hz

DDC 2B(Digital), DDC2B(Anlaog)

On Mode
Sleep Mode ≤ 0.5 W

Off Mode ≤ 0.5 W

With Stand

Width 47.58 cm / 18.73 inches
Height 37.64 cm / 14.81 inches
Depth 16.99 cm / 6.68 inches

cm

SOG (Sync On Green), Digital

DVI-D Connector (Digital)

27 W(Typ.)

:

Without Stand

Width 47.58 cm / 18.73 inches
Height 30.35 cm / 11.94 inches
Depth 6.08 cm / 2.39 inches

Weight(excl. packing) 3.2 kg (7.11 lbs)

Range

Power Input

Environment
al Conditions

Stand Base

Power cord

NOTE

Information in this document is subject to change without notice.

Tilt : -5˚~15˚

AC 100-240V~ 50/60Hz 1.0A

Operating Conditions

Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type

27

Specifications

W2046S

Display

Sync Input

Video Input

Resolution

Plug&Play

Power
Consumption

Dimensions

& Weight

20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :

0.2766 x 0.2766 mm (Pixel pitch)

Horizontal Freq. 30 - 83 kHz (Automatic)

Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.

Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)

Max

Recommend VESA 1600 x 900 @60 Hz

DDC 2B

On Mode
Sleep Mode ≤

Off Mode ≤

With Stand

Width 47.58 cm / 18.73 inches
Height 37.64 cm / 14.81 inches
Depth 16.99 cm / 6.68 inches

cm

50.8

SOG (Sync On Green)

VESA 1600 x 900 @60 Hz

:

27 W(Typ.)

0.5 W

0.5 W

Without Stand

Width 47.58 cm / 18.73 inches
Height 30.35 cm / 11.94 inches
Depth 6.08 cm / 2.39 inches

Weight(excl. packing)

Range

Power Input

Environment
al Conditions

Stand Base

Power cord

NOTE

Information in this document is subject to change without notice.

Tilt : -5˚~15˚

AC 100-240V~ 50/60Hz 1.0A

Operating Conditions

Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type

3.2 kg (7.11 lbs)

28

Specifications

W2246T

Display

Sync Input

Video Input

Resolution

Plug&Play

Power
Consumption

Dimensions

& Weight

21.5 inches (54.6 cm) Flat Panel Active matrix-TFT LCD

Anti-Glare coating

54.6

Visible diagonal size :

0.248 x 0.248 mm (Pixel pitch)

Horizontal Freq. 30 - 83 kHz (Automatic)

Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.

Signal Input 15 pin D-Sub Connector

Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital

Max VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 Hz

DDC 2B(Digital), DDC2B(Anlaog)

On Mode
Sleep Mode ≤ 0.5 W

Off Mode ≤ 0.5 W

With Stand

Width 50.92 cm / 20.04 inches
Height 39.69 cm / 15.62 inches
Depth 21.00 cm / 8.26 inches

cm

SOG (Sync On Green), Digital

DVI-D Connector (Digital)

28 W(Typ.)

:

Without Stand

Width 50.92 cm / 20.04 inches
Height 30.42 cm / 11.97 inches
Depth 5.98 cm / 2.35 inches

Weight(excl. packing) 3.5 kg (7.77 lbs)

Range

Power Input

Environment
al Conditions

Stand Base

Power cord

NOTE

Information in this document is subject to change without notice.

Tilt : -5˚~15˚

AC 100-240V~ 50/60Hz 1.0A

Operating Conditions

Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type

29

Specifications

W2246S

Display

Sync Input

Video Input

Resolution

Plug&Play

Power
Consumption

Dimensions

& Weight

21.5 inches (54.6 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :

0.248 x 0.248 mm (Pixel pitch)

Horizontal Freq. 30 - 83 kHz (Automatic)

Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.

Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)

Max VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 Hz

DDC 2B

On Mode
Sleep Mode ≤

Off Mode ≤

With Stand

Width 50.92 cm / 20.04 inches
Height 39.69 cm / 15.62 inches
Depth 21.00 cm / 8.26 inches

cm

54.6

SOG (Sync On Green)

:

28 W(Typ.)

0.5 W

0.5 W

Without Stand

Width 50.92 cm / 20.04 inches
Height 30.42 cm / 11.97 inches
Depth 5.98 cm / 2.35 inches

Weight(excl. packing)

Range

Power Input

Environment
al Conditions

Stand Base

Power cord

NOTE

Information in this document is subject to change without notice.

Tilt : -5˚~15˚

AC 100-240V~ 50/60Hz 1.2A

Operating Conditions

Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type

3.5 kg (7.77 lbs)

30

Specifications

W2346T

Display

Sync Input

Video Input

Resolution

Plug&Play

Power
Consumption

Dimensions

& Weight

23 inches (58.4 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating

58.4

Visible diagonal size :

0.266 x 0.266 mm (Pixel pitch)

Horizontal Freq. 30 - 83 kHz (Automatic)

Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.

Signal Input 15 pin D-Sub Connector

Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital

Max VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 Hz

DDC 2B(Digital), DDC2B(Anlaog)

On Mode
Sleep Mode ≤ 0.5 W

Off Mode ≤ 0.5 W

With Stand

Width 54.25 cm / 21.35 inches
Height 41.66 cm / 16.40 inches
Depth 21.00 cm / 8.26 inches

cm

SOG (Sync On Green), Digital

DVI-D Connector (Digital)

32 W(Typ.)

:

Without Stand

Width 54.25 cm / 21.35 inches
Height 32.30 cm / 12.71 inches
Depth 6.05 cm / 2.38 inches

Weight(excl. packing) 4.2 kg (9.33 lbs)

Range

Power Input

Environment
al Conditions

Stand Base

Power cord

NOTE

Information in this document is subject to change without notice.

Tilt : -5˚~15˚

AC 100-240V~ 50/60Hz 1.0A

Operating Conditions

Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type

31

Specifications

W2346S

Display

Sync Input

Video Input

Resolution

Plug&Play

Power
Consumption

Dimensions

& Weight

23 inches (58.4 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :

0.266 x 0.266 mm (Pixel pitch)

Horizontal Freq. 30 - 83 kHz (Automatic)

Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.

Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)

Max VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 Hz

DDC 2B

On Mode
Sleep Mode ≤

Off Mode ≤

With Stand

Width 54.25 cm / 21.35 inches
Height 41.66 cm / 16.40 inches
Depth 21.00 cm / 8.26 inches

cm

58.4

SOG (Sync On Green)

:

32 W(Typ.)

0.5 W

0.5 W

Without Stand

Width 54.25 cm / 21.35 inches
Height 32.30 cm / 12.71 inches
Depth 6.05 cm / 2.38 inches

Weight(excl. packing)

Range

Power Input

Environment
al Conditions

Stand Base

Power cord

NOTE

Information in this document is subject to change without notice.

Tilt : -5˚~15˚

AC 100-240V~ 50/60Hz 1.0A

Operating Conditions

Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type

4.2 kg (9.33 lbs)

32

Specifications

Preset Modes (Resolution)

W1946T/W1946S

Display Modes (Resolution)Horizontal Freq. (kHz) Vertical Freq. (Hz)

1

720 x 400

2

640 x 480

3

640 x 480

4

800 x 600

5

800 x 600

6

832 x 624

7

1024 x 768

8

1024 x 768

*9

1360 x 768

W2046T/W2046S

Display Modes (Resolution)Horizontal Freq. (kHz) Vertical Freq. (Hz)

1

720 x 400

2

640 x 480

3

640 x 480

4

800 x 600

5

800 x 600

6

1024 x 768

7

1024 x 768

8

1152 x 864

*9

1600 x 900

31.468

31.469

37.500

37.879

46.875

49.725

48.363

60.123

47.712

31.468

31.469

37.500

37.879

46.875

48.363

60.123

67.500

60.000

70
60
75
60
75
75
60
75
60

* Recommend Mode

70
60
75
60
75
60
75
75
60

33

* Recommend Mode

Specifications

W2246T/W2346T/W2246S/W2346S

Display Modes (Resolution)Horizontal Freq. (kHz) Vertical Freq. (Hz)

1
2
3
4
5
6
7
8

9
10
11

*12

Indicator

MODE

On Mode
Sleep Mode
Off Mode

720 x 400
640 x 480
640 x 480
800 x 600

800 x 600
1024 x 768
1024 x 768
1152 x 864

1280 x 1024
1280 x 1024
1680 x 1050
1920 x 1080

White Blinking

LED Color

White

Off

31.468

31.469

37.500

37.879

46.875

48.363

60.123

67.500

63.981

79.976

65.290

67.500

70
60
75
60
75
60
75
75
60
75
60
60

* Recommend Mode

34

Installing the Wall mount plate

This monitor satisfies the specifications of the Wall mount plate or
the interchange device.

1

.

Place the monitor with its front facing downward on a soft cloth.

. Separate the stand by pushing the PUSH button.

2

Good Position Bad Position

Warning:

You can hurt your finger.

3

.

Install the Wall mount plate.

Wall mount plate(Separate purchase)

This is stand-type or wall mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount
plate is purchased.

Kensington Security Slot

Connected to a locking cable that can be
purchased separately at most computer stores.

35

Digitally yours