LG VTCP743ND User Guide

Model

add a three steel pipe AVTI506065 2005.10.11 QiTeng C.Y.T

Language Page Material Date Part No.

V-CP743ND

English&Nederlands&Deutsch&French

１６ . Color(cover/body) 1/1

Weight 100g Size(W*H) 150X210(mm)

2005.11.25 Designer Liubin

3828FI2865A

Description owner's manual

Change Record

No. ECO No. Date Designer Confirm

Change content

ｃｈａｎｇｅ　ｗａｒｒａｎｔｙ　ｃａｒｄ　　 AVTI506419 05/11/25 Liubin C.Y.T

3 4 5 6 7 8 9

V-CP733NBR/NDR V-CP743NB/NBB/ND/NDB

V-CP752RD/RT/RDN

E F N D

V-CP743NT/RD/NDR

– 2 –

6 5

– 3 –

V-CP733NBR/NDR V-CP743NB/NBB/ND/NDB

V-CP743RD V-CP752RD/RT/RDN

/NT/RD/NDR

– 4 –

Please read all the following information, which contains important instructions for the safety, the use and the maintenance of the appliance. This appliance complies with the following EC Directives: -73/23/EEC, 93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive.

■ Never allow children to use the appliance unsupervised.

■ Do not use the appliance If the supply cord is damaged or faulty.

■ If the mains lead is damaged, it must be replaced by an approved LG Electronics Service Agent in order to avoid a hazard.

■ Always switch the vaccum cleaner off before :

• changing the dust bag.

• changing or cleaning the filters.

■

If no dustbag is inserted, the cover cannot be closed. Please do not use force!

■ Do not vacuum flammable or explosive substances(liquids or gases).

■ Do not vacuum hot ash, embers etc. nor sharp objects.

■ Do not vacuum water or other liquids.

Connecting the flexible hose

Push the end of the head(1) on the flexible hose(2) into the attachment point on the vacuum cleaner. To remove the flexible hose from the vacuum cleaner, press on the button(3) situated on the head, then pull upwards.

Assembling the tubes

(depending on model)

• Metal or plastic tube(4)

- Fit together the two tubes by twisting slightly.

•Telescopic tube(5)

- Push spring latch(6) forward.

- Pull out tube to required length.

- Release spring latch to lock.

Using the cleaning head and Accessory Nozzles

(depending on model) Fit the large cleaning head onto the end of the tube.

• The 2 position head(7) is equipped with a

pedal(8) which allows you to alter its position according to the type of floor to be cleaned. Hard floor position(tiles, parquet floors...). Press on the pedal to lower the brush. Carpet or rug position. Press on the pedal to lift the brush up.

• Crevice Tool(9)

For vacuuming in those normally inaccessible places i.e. reaching cobwebs, or down the side of a sofa!

• Dusting brush(10)

For vacuuming picture frames furniture outlines, books and other uneven objects.

• Upholstery Nozzle(11)

For vacuuming uphostery, mattresses, etc. The thread collectors help to pick up the threads and fluff.

How to plug in and use

Pull out the supply cord to the desired length and plug into the socket.

Press button (13) to start the vacuum cleaner. To stop it press the button (13) again.

Adjusting the power level

• If your appliance is equipped with an

electronic variable power control(13), you can choose the power appropriated for the task.

(depending on model)

•

The flexible hose handle(14) has a manual air flow regulator(15) which allows you to briefly reduce the suction level.

Storage(16)

When you have switched off and unplugged the appliance, press on the button (12) to automatically rewind the cord. You can move or store your appliance in a vertical position by sliding the hook on the large cleaning head into the clip on the underside of the appliance.

Information for your safety

How to Use

– 5 –

Changing the dust bag

The dustbag needs changing when the cleaner is set to maximum power and the cleaner head is off the floor but the “bag full” indicator window(17) is completely coloured red.

Even if the dustbag does not appear to be full at this stage, it should be changed. It could be that a great deal of very fine dust has clogged up the pores of the dust bag.

• Turn off the appliance and unplug it.

• Open the cover by pressing the hook(18)

and lifting it up until it snaps into place.

Your appliance is equipped with either a paper dust bag (19) or a fabric dust bag (21)(depending on model).

• Take hold of the dust bag by the handle and pull.Remove the bag and throw it away.

• To refit a new bag push the cardboard support of a new bag into the bag mount (20)until it will go no furthe

If your appliance is fitted with a fabric dust bag

follow the same instructions as above. Empty it and replace it(21).

Note: as the appliance is fitted with a safety device which checks that the bag is in place you cannot close the lid if the bag is not fitted correctly.

Cleaning the motor filter

The motor filter is situated inside the appliance between the dust bag and the motor. Each time that you change the air outlet filter we advise you to remove the motor filter(22) and to clean it by tapping to remover the dirt and then replacing it in the vacuum cleaner.

Check that the appliance is correctly plugged in and that the electrical socket is working.

• Stop the appliance and unplug it.

• Check that the tubes, flexible hose and

cleaning tool are not blocked.

• Check that the dust bag is not full.Replace if necessary.

What to do if your appliance does not work?

What to do when the suction performance reduces?

+ 11 hidden pages