LG VR66803VMNP User Manual
OWNER’S MANUAL
ROBOKING
Before using, please carefully read the Safety Precautions pages to allow for safe operation of the product. After reading this manual, please keep it in an easily accessible location.
VR668**V*N*
www.lg.com
MFL67680045
FEATURES
Zigzag
Corner Master
By having adopted a brand new concept design that is appropriate for walls, the Robot Cleaner's cleaning performance is incredibly efficient.
Learning Mode
The Robot Cleaner is capable of memorizing the cleaning environment via its Smart Operation feature for smarter cleaning.
Turbo Mode
In the Turbo mode, the Robot Cleaner operates the suction motor and the brushes at a greater speed giving cleaner results.
When selected, the "Turbo" mode is automatically activated on carpets, which enables the Robot Cleaner to run more efficiently.
Drawer Mop Plate (Option)
The "Drawer mop plate" makes it much easier for users to fit and remove the mop without having to turn over the device.
My Space Mode
By commanding it to clean a particular area, the Robot Cleaner quickly cleans that desired area.
Repeat Cleaning
The Robot Cleaner will continuously clean until the battery runs out.
Location Search Function
If the Robot Cleaner is moved from a spot while operating, the device will automatically search for the previous location and return to the spot from where it was interrupted.
Smartphone application description
You can control the Robot Cleaner from your smartphone.
CONTENTS
1
BEFORE USING
2~6 Safety precautions
7 Included with product 8~9 Parts description 10~11 Button functions
12Display status information
13Before you start
14Overview
2
METHOD OF USE
15How to install the home station
16How to turn the Robot Cleaner power supply on & off
17How to start and stop cleaning 18~19 How to charge the battery 20~21 Cleaning modes
22~23 Auxiliary cleaning modes
24Time setting
25Scheduled cleaning
26Mop cleaning (option)
27Location search function 28~29 Smart diagnosis
30~51 Smart Application Function
52Product info initialization
3
HANDLING METHOD AFTER USE
53Cleaning the dust bin
54Cleaning the dust bin filter
55Cleaning the brush
56Cleaning the sensor/charging terminal
57Cleaning the side brush
58Cleaning the ultra microfiber mop (option)
4
ADDITIONAL INFORMATION
59~61 Troubleshooting
62 Before you call for service
5
REFERENCE
63Product specifications
64Reference items
SAFETY PRECAUTIONS
The purpose of the safety precautions described below is for the user to use the product safely and correctly to prevent any unexpected risk of injury or damage.
Basic safety precautions
After reading this manual, please keep it in an easily accessible location.
WARNING 
CAUTION
This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage and/or serious bodily harm or death.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
WARNING
1.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2.Children should be supervised to ensure that they do not play with the appliance.
3.If the supply cord is damaged, it must be replaced by LG Electronics Service Agent in order to avoid a hazard
4.This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance must not be made by children without supervision.
2
WARNING
For your safety, do not remove the battery from the Robot Cleaner. If you need to replace the battery of the Robot Cleaner, take it to the nearest authorized LG Electronics service center or dealer for assistance.
Failure to follow this warning can cause fire or product failure.
Make sure the power cord of the home station is not crushed under a heavy object or damaged by contact with sharp objects.
Failure to follow this warning can cause electric shock, fire or product failure. If the power cord is broken, do not plug it in. Take the product to an LG Electronics Authorised service repairer.
Do not place the home station and the Robot Cleaner near a heating device.
Doing so can cause product deformation, fire, or product failure.
Do not force the power plug to bend. Do not use the power
plug when it has been damaged or loosened.
Doing so can cause fire or product failure.
Do not touch the power plug with wet hands.
Doing so can cause electric shock.
SAFETY PRECAUTIONS
Never use the Robot Cleaner with a battery and/or home station from any other product than the Robot Cleaner.
Doing so can cause fire or product failure.
Do not use the Robot Cleaner when candles or fragile objects are placed on the floor.
Doing so can cause fire or product failure.
Always use a dedicated power outlet with a 10 amp rating.
If multiple appliances are connected to an outlet simultaneously, they can generate enough heat to cause a fire.
When pulling out the home station power plug, always pull it out by grabbing the plug, not the cord. When pulling out the power plug, do not to touch the prongs with your fingers.
Doing so can cause an electric shock.
Do not allow children or pets to play with or rest upon the Robot Cleaner at any time. Do not use the Robot Cleaner while an object is hanging from it.
Doing so can cause injury or product damage.
3
SAFETY PRECAUTIONS
WARNING
|
Do not spray or use |
|
inflammable materials, |
| <![if ! IE]> <![endif]>Gasoline |
surfactants, or drinking water |
in the vicinity of the Robot |
|
|
Cleaner. |
Doing so can cause fire or product failure.
*Inflammable materials: gasoline, thinner, etc.
*Surfactant: detergent, articles for bath, etc.
Do not insert any part of the body, such as a hand or foot, below the brush or wheels of the Robot Cleaner while in use.
Doing so can cause injury or product damage.
Do not operate the Robot Cleaner on narrow and high furniture such as a wardrobe, refrigerator, desk, table, etc.
Doing so can cause injury, product failure or damage which is not covered by the warranty.
Do not activate the device on a floor that has more than a 10 degree incline.
The device may not work properly.
Turn the power supply off immediately if any abnormal sound, odor, or smoke is generated from the Robot Cleaner by removing it from the home station and turning off the main switch on the rear side of the unit.
Failure to do so can cause fire or product failure.
Do not operate the Robot Cleaner in a room where a child is sleeping.
Doing so can cause injury or product damage.
Do not leave Children or pets near the Robot Cleaner unsupervised.
Doing so can cause injury or product damage.
This product is intended for indoor domestic home use and should not be used in mobile applications. it should not be used in commercial applications such as workshops or garages or around indoor swimming pools, etc.
4
CAUTION
Frequently empty the dust bin and maintain its cleanliness.
The dust collected in the dust bin can trigger allergies and may contain harmful insects. it should be cleaned after each use.
Use the Robot Cleaner indoors only.
Using it outdoors can cause product failure and irreparable damage to the unit.
Close the cover of the dust bin on the main unit before starting cleaning.
If the cover is not closed, it can cause injury or product damage.
DO NOT use the Robot Cleaner 
around a banister, staircase or any other dangerous place.
Doing so could cause injury or 
damage to the unit.
In rare cases, the Robot Cleaner’s brush can damage carpet. If this happens, immediately stop the cleaning operation.
When a carpet has long tassels, the tassels can be damaged.
Do not let the main unit and charging terminal of the home station come into contact with metallic objects.
Doing so can cause product failure.
Do not put water, detergent, etc. into or onto the Robot Cleaner.
Doing so can cause product failure. Do not put any water or detergent on the Robot Cleaner. If liquids get inside of the Robot Cleaner, turn off the power supply and contact an LG Electronics sales agent or customer care center.
SAFETY PRECAUTIONS
Do not drop the Robot Cleaner or subject it to strong impacts.
Doing so can cause injury or product failure not covered by the warranty.
Do not expose the Robot Cleaner to cold temperatures (less than -5 C) for a long period of time.
Doing so can cause product failure.
Remove any cables or string from the floor before starting.
Cable or string can get tangled in the wheels of Robot Cleaner and cause product failure or the cord of an appliance can be disconnected.
Make sure the Robot Cleaner is not put on a table or desk, with the power ON.
It may result in an injury or damage to the product.
Do not allow the Robot Cleaner to sweep up liquids, blades, thumb tacks, sharp objects or ashes, hot or cold. etc.
These items can cause product failure or damage.
Do not put sharp objects into the opening of the Robot Cleaner’s ultrasonic sensors.
Doing so can cause product failure.
Do not use the Robot Cleaner when the dust bin is completely full.
Doing so can cause product failure.
5
SAFETY PRECAUTIONS
CAUTION
If the floor is wet or has wet |
When the robot cleaner is |
|
spots, wipe them up before |
operating, it may hit the chair |
|
using the Robot Cleaner. Do |
leg, desk leg, table leg or other |
|
not use the Robot Cleaner on a |
narrow pieces of furniture. |
|
wet surface. |
For quicker and better cleaning, |
|
|
||
Doing so can cause product |
place the dining chairs on top |
|
failure. |
of the dining table. |
|
When attaching the mop, |
NOTE: Very low thresholds will |
|
ensure that it is fitted correctly |
allow the Robot cleaner to go |
|
so that it does not block the |
over them and perhaps into an |
|
lower camera sensor. |
undesirable location. Make sure |
|
Blocking the bottom camera |
that all the doors of the rooms |
|
that are not to be cleaned are |
||
sensor may not allow the |
||
closed. Oddly shaped and |
||
product to work correctly. |
||
sized thresholds can cause the |
||
|
||
To save energy when the Robot |
cleaner to become stuck. This |
|
is not a malfunction. |
||
Cleaner is not in use for longer |
||
|
||
periods, turn off the power |
|
|
switch, and turn on the power |
|
|
switch again just prior to using |
|
|
the Robot cleaner again. |
|
Tip Check the following items before use:
•Empty the dust bin after each operation or prior to it filling up.
•Remove any cables or long strings from the floor.
•Remove any moisture from the floor before cleaning.
•Close the cover of the dust bin before cleaning.
•Remove fragile or unnecessary objects from the room to be cleaned.
For example, remove expensive ceramics and valuables from the floor.
•Confirm whether the battery has sufficient power, and if it is low, recharge it.
•Close the doors of any room that you do not want the Robot Cleaner to enter.
During cleaning, the Robot Cleaner may enter another room and continue cleaning.
•Do not use this product in the room where a child is sleeping alone. The child can be hurt or woken.
•Remove towels, foot towel or any other thin cloth from the floor as they can get caught by the brush.
•Before starting the device, it's better to remove carpets that are thicker than 20 mm as they may cause it to malfunction.
•Please close any balcony doors as the wheels may get stuck while cleaning.
•Please install the mop board since climbing low heights, such as bottom of a standing electric fan, may cause damage to the robot cleaner.
•Connecting to a wireless router without proper security setup may cause security issues.
•If security is set up internally for your organization, it may affect connection therein.
6
INCLUDED WITH PRODUCT
Robot Cleaner
Remote controller |
Home station |
s Figures can be different from actual objects.
Cleaning Tool |
Dust bin filter (spare) |
Quick guide |
Operation manual |
|
|
(option) |
|
|
|
for cleaning |
|
|
|
|
sensors |
|
|
|
|
for cleaning |
|
|
|
|
the filter |
|
|
|
|
Cleaning brush |
Mop plate (option) |
Ultra microfiber mop |
||
(It’s on the dust bin cover) |
|
|
(2 pieces) (option) |
|
Batteries for remote controller |
Side brush (2 pieces) |
Pet Brush |
(2 units of AAA size) |
(option) |
(option) |
7
PARTS DESCRIPTION - ROBOT CLEANER
Plan view
Upper camera sensor
Dust bin cover
Display & function buttons
Dust bin compartment release button
Tag On
Front view
Ultrasonic sensors
Obstacle detecting sensor window Detecting |
sensors of home station & Receiving sensors |
of remote controller |
Front Camera
LED
Rear view
Main Power switch
Ventilation port
Bottom view
Cliff detection sensors
Side brush
Charging terminals
Brush
Wheel
Battery housing
Lower camera sensor s Figures can be different from actual objects.
8
PART DESCRIPTION – HOME STATION / DUST BIN
Home station
Remote controller holder
Charging terminal
Power switch
Power cord fixing hook
Dust bin
Dust bin handle
Cleaning brush
Dust bin cover
Suction port flap 
Sponge filter
Dust bin lid 
opening button
EPA Filter 
Filter cover 
s Figures can be different from actual objects.
9
BUTTON FUNCTIONS – ROBOT CLEANER
TURBO
START/STOP
MODE
HOME
BUTTON(KEY) LOCK ON/OFF
Voice Gender
Product registration (Wi-Fi)
Product registration (NFC)
Front camera On/OFF
• If the button is pressed, ‘Turbo Mode’ will be set with a voice confirmation.
• If the button is pressed whilst in ‘Turbo Mode’, it will be canceled.
• Used to turn the power on from Standby, start or stop cleaning.
• If the button is pressed whilst the unit is powered ON, it will start cleaning.
• If button is pressed during the cleaning, it will stop the cleaning.
• If the button is pressed for about 2 sec. whilst the power is ON, the power will be returned to Standby.
• If the button is pressed in 'Smart Diagnosis' mode, it will end the diagnosis.
• Used to change the clean mode setting.
• If the machine is at the Home Station, ‘Spot Clean’ option is not available.
• The 'My Space' mode can only be selected by remote control (when the
Robot Cleaner is not on the home station).
• Used to return the Robot Cleaner back to the home station for charging.
• If cleaning is finished or the battery is low, the Robot Cleaner will return to the Home Station by itself to recharge its battery.
• Pressing the ‘Turbo' and 'Mode' button for 3 seconds will activate or deactivate the Lock function.
• If 'Lock' is ON, a voice announcement "Key lock has already been set" will be heard each time a button is pressed.
• Pressing the ‘HOME’ button for 3 seconds will change the Voice for the voice message.
• You cannot use this function with the button on the remote controller.
• Press and hold down the Turbo button for 3 seconds to activate the registration mode with a voice message.
• This mode is for registering the product to Roboking over Wi-Fi.
• Put your smartphone on "Tag On" for registration.
• You can also register your Roboking via NFC of your smartphone without going through the registration process.
• Press and hold down the MODE and CHARGE buttons for 3 seconds to activate or deactivate the front camera.
• Home Guard and Home View will not be available with the front camera disabled.
10
BUTTON FUNCTIONS – REMOTE CONTROLLER
Start
Pressing this button will start the cleaning. (p17)
Mode
Changes the cleaning mode. (p20)
Directional button
This button enables
Manual Operation and selection of an area in 'My
Space cleaning' mode.
Repeat
This button allows activating or deactivating 'Repeat Cleaning' mode. (p23)
Schedule
Used to start cleaning at a
scheduled time. Pressing the button for
3 sec. will cancel the scheduled cleaning.
Schedule Setting/Cancel options are available only in 'Charge' mode. (p25)
Clock
Used to set the current time indicated on the Robot Cleaner. (p24)
Home
Used to recharge the Robot
Cleaner by making it return to the
Home Station. (p18)
Turbo
Used to activate or deactivate 'Turbo' mode. (p23)
Stop/OK
Pressing the button will stop the Robot Cleaner, or confirm a
cleaning schedule or time setting.
My Space
Used to put the Robot Cleaner
in 'My Space clean' mode. (p21)
Mute
Used to activate or deactivate
'Mute' mode. (p12)
Diagnosis
Used to run Smart Diagnosis. Available only when Robot Cleaner is recharging. (p28)
Tip • Remote Controller does NOT provide a Power ON function.
• With the machine's power OFF, the Remote Controller will not work.
• To turn the power ON/OFF, use the 'Start/Stop' button on the upper section of the Robot Cleaner.
• The 'Mode', 'My Space' or 'Clock' button can only be used after stopping the Robot Cleaner or whilst it is charging on the Home station.
11
DISPLAY STATUS INFORMATION
Lock icon
Indicates whether 'Lock‘ is activated or not.
Remote connection
Is Displayed the smartphone
connect to
Schedule
Indicates the status of Schedule/'Once
reservation', or 'Daily reservation'
setting.
Repeat cleaning 
Displayed if the machine is in 'Repeat Cleaning' mode.
Zigzag cleaning
This icon is displayed to indicate Robot Cleaner is working in a Zigzag Clean.
Cell by Cell cleaning
This icon is displayed to indicate Robot Cleaner is working in a Cell by Cell cleaning mode.
Mute icon
This icon indicates whether the Mute is ON or OFF.
Battery icon
This icon indicates the residual battery level, it flashes if the battery needs recharging.
AM/PM icon
This indicates a.m. or p.m. according to the clock setting.
|
|
Turbo icon |
|
|
This display |
|
|
illuminates if Turbo |
|
|
Mode is activated. |
|
|
|
|
|
Homing icon |
|
|
This icon is displayed |
|
|
if Robot Cleaner is in |
|
|
'Homing' mode. |
|
|
My Space cleaning |
|
|
Is displayed when the |
|
|
Robot Cleaner runs |
|
|
My Space cleaning |
|
|
mode. |
|
|
Spot cleaning |
Time display |
This icon appears |
|
This indicates the current |
when Spot cleaning |
|
and scheduled time. |
is selected. |
|
Tip • Once the clean mode is selected (Zigzag or Cell by Cell) it will be remembered even if the power is OFF.
•To cancel the reservation, please press the 'Schedule' button on the remote for 3 seconds while the Robot Cleaner is recharging.
12
BEFORE YOU START
Check these items before cleaning
•Do not use this device in a room where a child is left alone. The child could be injured.
•Remove fragile or unnecessary objects from the room to be cleaned.
Especially, remove expensive ceramics and valuables from the floor.
•Close the cover of the dust bin compartment before cleaning.
•Remove any moisture that might be on the floor.
•Remove cables, strips, towels, mats etc. from the floor so they will not get tangled in the brushes.
•Confirm whether the battery charge is sufficient, and if it is low, recharge it.
•Empty the dust bin before or after each clean, or before it becomes full.
•Close the doors of any room that you do not want the Robot Cleaner to enter. During cleaning, the Robot Cleaner may enter another room and continue cleaning.
•When the mop is attached, Robot Cleaner will not be able to go over thresholds of 5 mm or higher. If you are not planning to use the mop for cleaning, remove the mop before using Robot Cleaner.
•Before starting the device, it's better to remove carpets that are thicker than 20 mm as they may cause it to malfunction.
•Please close any balcony doors as the wheels may get stuck while cleaning.
Loading the remote controller battery
1.Open the battery cover by lifting the rear hook of the remote controller.
2.Insert two AAA batteries, checking for +, - nodes while loading.
3.Close the battery cover completely so that the batteries will not fall out.
–
+
+
Precautions while using the remote control
•Only press one button at a time.
•Do not drop or subject it to any impact.
•Do not store it near devices that give off heat, fire or hot air.
•Certain fluorescent lamps, such as the three band radiation lamp, can interfere with the activation of the remote control. Therefore, use it as far away as possible from such lamps.
•If the remote control is far from the Robot Cleaner when activated, it may fail to operate properly.
Use the remote within 3 m of the Robot Cleaner if possible.
13
OVERVIEW
1
2
3
4
5
6
Install the home station. (p15) |
|
|
1.5 |
|
|
|
|
||
Insert the power cord plug into an outlet and locate |
|
|
2 |
|
the station against a wall. If power is not supplied to |
1.5 |
|
||
|
the home station, the Robot Cleaner will not charge.
Turn on the power supply of the Robot
Cleaner. (p16)
Turn ON the power switch on the rear-left of Robot Cleaner, and press the 'Start/Stop' button on the top.
If the power supply is not turned on, refer to page 16.
Check the dust bin.
Check the cleanness of the dust bin before starting cleaning and close the dust bin compartment cover on the main unit.
Start cleaning. (p17)
Press the START/STOP button once again while the Robot Cleaner is turned on. You will hear an announcement of the cleaning mode and cleaning will begin once the Robot Cleaner has reversed and turned around.
Automatic charge. (p18~19)
The Robot Cleaner will self-diagnose and automatically return to the home station to recharge before the complete discharge of the battery. It takes approximately three hours to charge the battery.
Use the cleaning mode and auxiliary functions. (p20~26)
Use the buttons on Robot cleaner and Remote Controller to use each cleaning mode and supporting features
Cleaning modes include ZigZag, Cell by Cell, Spot,
My space, and Repeat cleaning; supporting features include Manual, Scheduled and Microfiber Mop cleaning.
< Warning > When the Robot Cleaner is operated with the dust bin compartment lid left
14 |
open, it can cause an injury or serious damage to the product. |
|
HOW TO INSTALL THE HOME STATION
How to Install the Home Station
1.Position the home station against a wall on hard level flooring to prevent sliding during docking.
Remove objects within 1.5 m to the right and left side and within 2 m to the front.
1.5
1.5
2
2. Plug the power cord into an outlet.
Wrap the remaining power cord around the fixed hook on the back side of the home station or along the wall surface so that the travel path of the Robot Cleaner will not be obstructed.
Fixing hook of power cord
3. Fix the home station against the wall so that it does not move. Then turn on the power switch.
4. When the remote controller is not used, store it in the remote controller holder on the home station.
Tip • Always keep the home station plugged in when in use. If the home station is not plugged in, the Robot Cleaner will not return to the station to charge automatically.
< Warning > Do not operate the Robot Cleaner if the Home Station has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped. To avoid electrical hazards, the cord must be replaced by LG Electronics, Inc. or a qualified service person.
15
HOWTOTURNTHE ROBOT CLEANER POWER SUPPLY ON & OFF
Turning on the main power supply
Make sure the Power Switch is on at the rear-left of the Robot
Cleaner.
If the power is OFF, turn the switch ON.
When turning on the power switch, do not press or touch any button located on the upper section of the Robot Cleaner. Button operations can be delayed.
Turn off the power switch if the Robot Cleaner is not used for a long period of time in order to protect the battery. The Robotic Cleaner cannot charge if the main switch is in the "OFF" position.
Turning on from Stand By power.
With the Standby power of the Robot Cleaner OFF, press 'Start/Stop' button for 1 second until a "Ting" sound is heard.
In about 10 seconds, the power will be on and a melody will sound.
If 10 minutes elapse without the Robot Cleaner having being given an active command after being turned on, the power will automatically return to Standby again.
Turning off the power supply
Press and hold the START/STOP button for two seconds while the Robot Cleaner is turned on. A melody will sound when the power is turned off.
Tip • If the power cannot be turned on, do the following.
- Turn the main power switch OFF, wait 5 seconds then ON again.
- Press the ‘START/STOP’ button after the main power switch has been turned on again - If the power is not turned on or if there is no display but only the “Ting” sound, put the
Robot Cleaner manually on to the home station as the battery may be flat.
16
HOW TO START AND STOP CLEANING
Using the buttons on the Robot Cleaner
After the Robot Cleaner main power switch is turned on, press the START/STOP button to begin cleaning. A melody will sound and cleaning will begin.
Press the START/STOP button during the cleaning cycle to stop cleaning.
When the ‘START/STOP’ button is pressed while the power supply of the Robot Cleaner is in Standby, the power will be turned on. Press the ‘START/STOP’ button one more time to start cleaning.
Using the remote controller
After the Robot Cleaner is turned on from the Robotic Cleaner, press the START button on the remote control. A melody will sound and cleaning will begin.
Press the Stop/OK button during the cleaning cycle to stop cleaning.
The Robot Cleaner cannot be turned on from Standby, by using the remote controller when the power of the Robot Cleaner is off. When the power is off, press the ‘START/STOP’ button on the upper side of Robot Cleaner to turn the power on and to allow the remote to be used.
During cleaning, collisions can happen when the sensor cannot detect objects because of their shape (Thin chairs and table legs, furniture corner). When this happens, the internal impact detecting sensor will react by using a backward motion.
If the Robot Cleaner is set to start cleaning at a location away from the home station, put the Robot Cleaner on a flat floor in order to prevent a malfunction of the obstacle detecting sensor. In addition, start cleaning from a location where there are no obstacles . For example, curtains or walls must be
30cm from the Robot Cleaner.
Tip For best results:
•Briefly scan the area to be cleaned for big and small objects that will cause difficulty for the Robot Cleaner.
•If cleaning is started when the Robot Cleaner is at the home station, the device can rapidly be returned to the home station as the current home position has been accurately read.
•When the mop plate is installed, to prevent a 2nd contamination from the contaminated mop, it will not go over door sills of 5 mm or higher.
17
HOW TO CHARGE THE BATTERY
Automatic charging
The Robot Cleaner returns to the home station at the end of a cleaning cycle or when its battery is running low.
If 10 minutes elapse without the Robot Cleaner moving or the battery is too low, the power will be automatically turned OFF.
Do NOT turn OFF the Main Power Switch as the battery will not be recharged. If the machine is returned manually with the Main Power Switch OFF, it announces an error message, "Main power switch on the back of the Robot Cleaner is turned off. Please turn the switch on."
In the event that the unit returns to the Home Station due to a
low battery during the cleaning, cleaning will be started, after recharging, from the nearest place of the area which has not been cleaned before. (Page 19)
If Robot Cleaner is unable to dock to the home station on its first attempt, it will try again until it docks successfully.
When Robot Cleaner has completed all areas that it can clean, it will return to the home station even when the battery level is not low.
Manual charging
You can manually charge the battery prior to using the Robot Cleaner for the first time or to charge the battery during cleaning.
Method 1. Attach the Robot Cleaner to the home station by aligning to the front side of the home station. A melody sound will be generated along with an audio message to start charging.
If a voice message, "Main power switch on the back of the Robot Cleaner is turned off. Please turn the switch on. " is announced repeatedly, then turn on the Main Power Switch.
Method 2. When the 'HOME' button of the remote control or the Robot Cleaner is pressed, charging will be prompted by automatically generating a searching
signal and returning the Robot Cleaner to the home station.
If the Robot Cleaner did not start cleaning from the home station or if the Robot Cleaner is manually charged by pressing the Home button, it may take slightly longer to find the home station.
If the Robot Cleaner is within 10 cm of the front of the charging terminal while the power is turned on from Standby, it will automatically be returned to the home station and charging will begin.
Tip Take the following precautions when using the home station:
•If foreign material is caught on the charging terminal, charging may not be activated. Wipe the terminal from time to time with a dry cloth after the power plug is disconnected.(p56)
•To prevent electric shock or damage to the home station, do not touch the charging terminal with any metallic objects.
•To avoid fire or electric shock, never disassemble or modify the home station.
18 |
• Do not to place the Robot cleaner, the home station or power plug near a heating source. |
HOW TO CHARGE THE BATTERY
Remaining Battery Charge Indicator
The Battery level is indicated on the Status Display, as follows.
•If recharging is in progress, the Battery Level indicator flashes showing the battery charge status level.
•If recharging is complete, only the 'Battery' and 'Clean Mode' icons are displayed to save the energy.
•Upon the need for recharging, only the first level of the Battery charge level indicator will be on and flashing.
Flickering
Charging is required |
Low |
Middle |
High |
If Robot Cleaner goes back to the Home Station, in need of a charge during the cleaning mode, the Cleaning mode indicator will continue to flash during charging to indicate that cleaning was disrupted as the battery required charging.
-When the 'Clean Mode' lamp continues to flash after recharging is complete, Robot Cleaner will then resume cleaning the areas which were not previously completed.
-Pressing the 'Start' button on the Remote Controller or 'Start/Stop' button on main unit whilst it is recharging, with the 'Clean Mode' lamp flashing, will also manually force the Robot Cleaner to find and clean the uncovered areas.
-Pressing the "Start" button on the remote control or the "Start/Stop" button on the Robot Cleaner after the Charging has completed will make the Robot Cleaner start to clean from the beginning again.
If the Battery is Not Charging
Check 1:
If the battery is not charging even when the Robot Cleaner is attached to the home station, check the following items.
- Turn the power switch on the rear-left of the Robot
Cleaner off once and then on again.
-Check the power lamp of the home station.
-Wipe the terminals on the home station with a dry cloth.
(p56)
The status indicators show the different pending conditions during charging mode.
In the case of no existing area to be cleaned after charging.
In the case of an existing area that the Robot Cleaner will resume cleaning when charging has completed. (flashing Cleaning indicator)
Power lamp 
Charge terminal
19
Loading...