OWNER’S MANUAL
AIR
CONDITIONER
ENGLISH ESPAÑOL
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE : WALL MOUNTED INVERTER
P/NO : MFL69486101
www.lg.com
2
TIPS FOR SAVING ENERGY
ENGLISH
TIPS FOR SAVING ENERGY
Here are some tips that will help you minimize the power consumption when you use the air
conditioner. You can use your air conditioner more efficiently by referring to the instructions
below:
• Do not cool excessively indoors. This may be harmful for your health and may consume more
electricity.
• Block sunlight with blinds or curtains while you are operating the air conditioner.
• Keep doors or windows closed tightly while you are operating the air conditioner.
• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.
• Speed up the fan to cool or warm indoor air quickly, in a short period of time.
• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.
• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block
the air flow or weaken the cooling / dehumidifying functions.
For your records
Staple your receipt to this page in case you need it to prove the date of purchase or for warranty
purposes. Write the model number and the serial number here:
Model number :
Serial number :
You can find them on a label on the side of each unit.
Dealer’s name :
Date of purchase :
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
WARNING: Before accessing the terminals, all power circuits must be disconnected.
WARNING: Fixed installations will incorporate disconnect means in accordance with installation
rules.
WARNING: This device will not be accessible to public.
WARNING: The appliance must be installed in accordance with national regulations for electrical
installations.
SAFETY PRECAUTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product
WARNING
It can result in serious injury or death when the directions are ignored
CAUTION
It can result in minor injury or product damage when the directions are ignored
WARNING
• Installation or repairs made by unqualified persons can result in hazards to you and others.
• Appliance shall be installed in accordance with national wiring regulations.
• The information contained in the manual is intended for use by a qualified service technician
familiar with safety procedures and equipped with the proper tools and test instruments.
• Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.
Installation
• Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.
• Contact an authorized service center when you install or relocate the air conditioner. Failure to
do so may result in serious injury or product failure.
• Always use a power plug and socket with a ground terminal.Failure to do so may result in
electric shock or product failure
• Install the panel and the cover of the control box safely. Failure to do so may result in explosion or fire.
• Install a dedicated electric outlet and circuit breaker before you use the air conditioner. Failure
to do so may result in electric shock or product failure.
• Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.
• Do not modify or extend the power cable. If the power cable or cord has scratches or skin
peeled off or deteriorated then it must be replaced. It may result in fire or electric shock.
• Be cautious when you unpack or install the air conditioner. Failure to do so may result in serious injury or product failure.
• Do not install the air conditioner on an unstable surface or where there may be a danger of it
falling. It may result in death, serious injury, or product failure.
• Use inflammable gas (nitrogen) to inspect leak and to purge air, using compressed air or flammable gas may cause fire or explosion.
!
!
!
3
ENGLISH
4
SAFETY PRECAUTIONS
ENGLISH
Installation
• Make sure to check if there is a refrigerant leak after you install or repair the air conditioner. Failure
to do so may result in product failure.
• Install the drain hose properly for smooth drainage of condensed water. Failure to do so may result
in product failure.
!
Operation
• Do not let the air conditioner run for a long time when the humidity is very high or when a door or
• Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Fail-
• Do not place any objects on the power cord. It may result in electric shock or product failure.
• Do not turn on or off the air conditioner by plugging in or unplugging the power plug. It may result in
• Do not touch, operate or repair the air conditioner with wet hands. It may result in electric shock or
• Do not place a heater or other heating appliances near the power. It may result in fire, electric
• Do not allow water to run into the air conditioner. It may result in explosion or fire.
• Do not leave flammable substances such as gasoline, benzene and thinner near the air conditioner.
• Do not use the air conditioner for an extended period of time in a small place without ventilation.
• When there is a gas leak, ventilate sufficiently before using the air conditioner again. Failure to do so
• Unplug the power plug if there is a noise, smell or smoke coming from the air conditioner. Failure to
• Stop operating and close the window in storm or hurricane.If possible remove the product from the
• Do not touch the electrostatic filter after opening the front grille. Failure to do so may result in elec-
• Contact an authorized service center when the air conditioner is submerged into water due to flood-
• Be cautious water could not enter the product
• Make sure to ventilate sufficiently when this air conditioner and a heating appliance such as a heater
• Turn the main power off and unplug the power plug when you clean or repair the air conditioner.
• Unplug the power plug when the air conditioner is not used for an extended period of time. Failure
• Do not place any objects on the air conditioner. It may result in product failure.
• For inner cleaning, contact an Authorized Service Center or a dealer. Do not use harsh detergent
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
• Children should be supervised to ensure that they do not play with the appliance.
window has been left open. Failure to do so may result in product failure.
ure to do so may result in fire, electric shock, or product failure.
fire or electric shock.
product failure.
shock, or product failure.
It may result in explosion or fire.
Ventilate the place regularly. Failure to do so may result in explosion or fire.
may result in explosion or fire.
do so may result in explosion or fire.
window before hurricane arrives
tric shock or product failure.
ing. Failure to do so may result in explosion or fire.
are used simultaneously. Failure to do so may result in fire, serious injury, or product failure.
Failure to do so may result in death, serious injury, or product failure.
to do so may result in product failure.
that causes corrosion or damage on the unit. Harsh detergent may also cause failure of product, fire,
or electronic shock.
or mental capabilities, or lack of experience and knowledge unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
CAUTION
SAFETY PRECAUTIONS
• Keep level even when installing the product.
• Install the air conditioner where the noise from the outdoor unit or the exhaust gas will not inconvenience the neighbors. Failure to do so may result in conflict between neighbors.
• When transporting the equipment, there should be at least 2 or more people, or a forklift. It may result in serious injury.
• Do not install the air conditioner where it will be exposed to sea wind (salt spray) directly. It may result in product failure.
Operation
• Do not expose people, animals or plants to the cold or hot wind from the air conditioner. It may result in serious injury.
• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system. It may result in death, fire or electric
shock.
• Do not block the inlet or outlet of air flow. It may result in explosion or product failure.
• Do not use strong cleaning agents or solvents when you clean the air conditioner, or spray water.
Use a smooth cloth. It may result in serious injury or product failure.
• Never touch the metal parts of the air conditioner when you remove the air filter. It may result in serious injury or product failure.
• Do not place any objects on the air conditioner. It may result in product failure.
• Always insert the filter securely after cleaning. Clean the filter every two weeks or more often if
necessary.
• Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operating. It may result in electric shock.
• Do not drink the water drained from the air conditioner. It may result in serious health complications.
• Use a sturdy stool or ladder when you clean, maintain or repair the air conditioner at a height. Failure
to do so may result in serious injury or product failure.
• Do not mix the batteries for the remote control with other types of batteries or mix new batteries
with used batteries. Failure to do so may result in product failure.
• Do not recharge or disassemble the batteries. Failure to do so may result in explosion, fire or serious
injury.
• Stop using the remote control if there is a battery fluid leak. If your cloth or skin is exposed to the
battery fluid from a leak, wash it off with clean water. Failure to do so may result in serious injury.
• If you swallow the battery fluid from a leak, wash out the inside of your mouth thoroughly and then
consult a doctor. Failure to do so may result in serious health complications.
WARNING
• Before accessing the terminals, all power circuits must be disconnected.
• Fixed installations will incorporate disconnect means in accordance with installation rules.
• This device will not be accessible to public.
• Install the device in accordance to national codes for electrical installations.
!
5
ENGLISH
TABLE OF CONTENTS
6
ENGLISH
TABLE OF CONTENTS
2
TIPS FOR SAVING ENERGY
3 IMPORTANT SAFETY
INSTRUCTIONS
7 BEFORE USE
7 Components
8 Using the remote control
9 - Inserting batteries
9 - Installing the remote control holder
10 BASIC FUNCTIONS
10 Cooling your room
10 Heating your room
10 Removing humidity
11 Airing your room
11 Adjusting the fan speed
11 Adjusting the air flow direction
11 Setting the timer
11 - Setting the current time
12 - Turning on the air conditioner
automatically at a set time
12 - Turning off the air conditioner
automatically at a set time
12 - Canceling the timer setting
12 Setting sleep mode
13 ADVANCED FUNCTIONS
13 Changing room temperature quickly
13 Remove room moisture quickly
14 Indoor air purification
14 - Auto Clean operation
14 Auto operation
14 Auto Changeover operation
15 Energy saving cooling mode
15 Display screen brightness
15 Display the current energy usage
15 Operating the air conditioner without the
remote control
16 Restarting the air conditioner
automatically
16 Comfort Sleep Mode
17 MAINTENANCE
18 Assemble the air filter
19 Cleaning the air filter
19 Cleaning the 3M Filter
20 TROUBLESHOOTING
20 Self-diagnosis function
20 Before requesting service
Utilización de Control Remoto
BEFORE USE
Components
BEFORE USE
7
ENGLISH
Indoor unit
Air Inlet
Air filter
COMFORT
SLEEP
SLEEP
Botón COMFORT SLEEP
Optimización de aire, nivel de flujo de aire y el
temporizador para dormir cómodamente.
Front grille
Signal receiver
Display
Air outlet
ENERGY
JET
DRY
* The feature can be changed according a type of model.
!
The number of operation lamps and their locations may vary, depending on the model of the
SWING
ION CARE[3SEC]
air conditioner.
SLEEP ON OFF
Outdoor unit
LIGHT
Air outlet
vents
COMFORT
SAVING
(Vertical louver & Horizontal vane)
NOTE
ENERGY
DISPLAY
TIMER
SET
CLEAR
TIME[3SEC] A/CLEAN
SLEEP
MODE
FAN
SPEED
ROOM
TEMP
C/ F[5SEC]
Air deflector
Air inlet vents
Base plate
Air outlet vents
Base plate
FAN
SPEED
MODE
Coolant
piping
SWING
ION CARE[3SEC]
Drain hose
ROOM
TEMP
Connection
wire
ON OFF
A/CLEAN
ENERGY
SAVING
LIGHT
SET
CLEAR
TIME[3SEC]
ENERGY
DISPLAY
Ionizer(Optional)
Botón de selección de modo de funcionamiento*:
Selecciona el modo de funcionamiento.
Funcionamiento de refrigeración ( ) / Fun-
cionamiento automático o cambio automático
( ) / Funcionamiento de deshumidificación ( )
/ Funcionamiento de calefacción ( ) / Fun-
cionamiento de circulación de aire ( )
Air outlet
vents
ION ATENCI N*
hora de puesta en marcha / parada.
Air inlet vents
pulsado 3 segundos.
On/Off button
Air inlet vents
ventilas
: Mantenga la piel hidratada
Base plate
Coolant piping
ajusta la hora actual si se mantiene
Drain hose
Connection
wire
* The feature can be changed according a type of model.
Coolant
piping
Drain hose
Connection
wire
ENERGY
JET
DRY
SAVING
ENERGY
DISPLAY
SWING
ION CARE[3SEC]
TIMER
SLEEP ON OFF
SET
CLEAR
LIGHT
TIME[3SEC] A/CLEAN
COMFORT
SLEEP
MODE
FAN
SPEED
ROOM
TEMP
C/ F[5SEC]
COMFORT
SLEEP
SLEEP
FAN
SPEED
MODE
SWING
ION CARE[3SEC]
ROOM
TEMP
ION CARE*:
Keep skin moisturized
ON OFF
A/CLEAN
ENERGY
SAVING
LIGHT
SET
CLEAR
TIME[3SEC]
ENERGY
DISPLAY
Also set the current time if held for 3
seconds.
Energy Display
Set whether or
not to display information regarding Energy
10
BASIC FUNCTIONS
ENGLISH
NOTE
!
• In this mode you cannot adjust the room
temperature, as it is adjusted automatically. Also, the room temperature is not
displayed on the display screen.
NOTE
!
Cooling-only models do not support this
function.
Cooling your room
(Cooling operation)
1 Press | to turn on the power.
2 Press f repeatedly to select the cooling
operation.
- A is displayed on the display screen.
3 Press
G
or H to set the desired temper-
ature.
- The temperature range is 18°C (64°F) ~
30°C (86°F).
Heating your room
(Heating operation)
1 Press | to turn on the power.
2 Press f repeatedly to select the heating
operation.
- B is displayed on the display screen.
3 Press
G
or H to set the desired tem-
perature.
- The temperature range is 16°C (60°F) ~
30°C (86°F).
Removing humidity
(Dehumidifying operation)
This mode removes excess moisture from an
environment with high humidity or in the rainy
season, in order to prevent mold from setting
in. This mode adjusts the room temperature
and the fan speed automatically to maintain
the optimal level of humidity.
1 Press | to turn on the power.
2 Press f repeatedly to select the dehu-
midifying operation.
-
D is displayed on the display screen.
BASIC FUNCTIONS
Display Screen
Remocon Indoor unit
Setting
Temperature
NOTE
!
Indoor unit display is displayed only 5 sec
and then return to the setting temperature.
NOTE
!
After setting the time. current time will be
displayed.
Example
[display screen] [Indoor unit display]
1 Hr
NOTE
!
After setting the time. current time will be
displayed.
Indoor unit display is displayed from 1H
to 7H, which is displayed only 5 sec and
then return to the setting temperature.
- is displayed on the display screen.
[display screen] [Indoor unit display]
- is displayed on the display screen.
[display screen] [Indoor unit display]