LG VK9820UHAY User Guide
P/No.: MFL57001319
Made In KOREA
VC-4806HT
OWNER'S MANUAL
New type cyclone vacuum cleaner
Please read all of the information on page 4~5 carefully.
This information contains important instructions for the safe use and the maintenance of the appliance.
2
3
Table of contents
Important safety instructions
...................................................................
4~5
How to use
....................................................................................................
6
Assembling vacuum cleaner
............................................................................................
6
Operating vacuum cleaner
...............................................................................................
8
Using all floor nozzle /mini turbine nozzle
........................................................................
9
Using accessory nozzles
...............................................................................................
10
Using the sani punch nozzle ......................................................................................11~15
Emptying dust tank
........................................................................................................
16
Cleaning dust tank
.........................................................................................................
17
Dust separator clean alarm display
................................................................................
18
Cleaning air filter and motor safety filter
.........................................................................
19
Cleaning exhaust filter
...................................................................................................
20
Check before requesting for service
...............................................................................
21
What to do if your vacuum cleaner does not work
...................................
22
What to do when suction performance decreases
....................................
22
4
IMPORTANT SAFETY INSTRUCTIONS
Read and follow all instructions before using your vacuum cleaner to prevent the risk of fire,electric shock, personal injury, or
damage when using the vacuum cleaner. This guide do not cover all possible conditions that may occur. Always contact your
service agent or manufacturer about problems that you do not understand. This appliance complies with the following EC
Directives : -2006/95/EC Low Voltage Directive 2004/108/EC EMC Directive.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “WARNING” or “CAUTION.”
These words mean:
WARNING
This symbol will alert you to hazards or unsafe practices which could cause serious
bodily harm or death.
CAUTION
This symbol will alert you to hazards or unsafe practices which could
cause bodily injury or property damage.
WARNING
• Do not plug in if control knob is not in OFF position.
Personal injury or product damage could result.
• Keep children away and beware of obstructions
when rewinding the cord to prevent personal injury
The cord moves rapidly when rewinding.
• Disconnect electrical supply before servicing or
cleaning the unit or when cleaner is not in use.
Failure to do so could result in electrical shock or personal
injury.
• Do not use vacuum cleaner to pick up anything that
is burning or smoking such as cigarettes, or hot
ashes.
Doing so could result in death, fire or electrical shock.
• Do not vacuum flammable or explosive substances
such as gasoline, benzene, thinners, propane
(liquids or gases).
The fumes from these substances can create a fire hazard
or explosion. Doing so could result in death or personal
injury.
• Do not handle plug or vacuum cleaner with wet
hands.
Doing so could result in death or electrical shock.
• Do not unplug by pulling on cord.
Doing so could result in product damage or electrical shock.
To unplug, grasp the plug, not the cord.
• Keep hair, loose clothing, fingers, and all parts of
the body away from openings and moving parts.
Failure to do so could result in electrical shock or personal
injury.
• Do not pull or carry by cord, use cord as a handle,
close a door on cord, or pull cord around sharp
edges or corners. Do not run vacuum cleaner over
cord. Keep cord away from heated surfaces.
Failure to do so could result in electrical shock or personal
injury or fire or product damage.
• The hose contains electrical wires. Do not use it if it
is damaged, cut or punctured.
Failure to do so could result in death,or electrical shock.
• Do not allow to be used as toy. Close attention is
necessary when used by or near children.
Personal injury or product damage could result.
• Do not use the vacuum cleaner if the power cord or
plug is damaged or faulty.
Personal injury or product damage could result. In these
cases, contact LG Electronics Service Agent to avoid hazard.
• Do not use vacuum cleaner if it has been under water.
Personal injury or product damage could result. In these
cases, contact LG Electronics Service Agent to avoid hazard.
• Do not continue to vacuum if any parts appear
missing or damaged.
Personal injury or product damage could result. In these
cases, contact LG Electronics Service Agent to avoid hazard.
• Do not use an extension cord with this vacuum
cleaner
Fire hazard or product damage could result.
• Using proper voltage.
Using improper voltage may result in damage to the motor
and possible injury to the user. Proper voltage is listed on
the bottom of vacuum cleaner.
• Turn off all controls before unplugging.
Failure to do so could result in electrical shock or personal injury.
• Do not change the plug in any way.
Failure to do so could result in electrical shock or personal
injury or product damage. Doing so result in death. If plug
does not fit, contact a qualified electrician to install the
proper outlet.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
• Repairs to electrical appliances may only be
performed by qualified service engineers.
Improper repairs may lead to serious hazards for the user.
• Do not put fingers near the gear.
Failure to do so could result in personal injury.
5
IMPORTANT SAFETY INSTRUCTIONS
Thermal protector :
This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor
overheating. If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner.
Check the vacuum cleaner for possible source of overheating such as a full dust tank, a blocked hose or
clogged filter. If these conditions are found,fix them and wait at least 30 minutes before attempting to use
the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch.
If the vacuum cleaner still does not run, contact the manufacturer for user support.
CAUTION
• Do not put any objects into openings.
Failure to do so could result in product damage.
• Do not use with any opening blocked: keep free of
dust, lint, hair, and anything that may reduce air
flow.
Failure to do so could result in product damage.
• Do not use vacuum cleaner without dust tank and/or
filters in place.
Failure to do so could result in product damage.
• Always clean the dust bin after vacuuming carpet
cleaners or fresheners, powders and fine dust.
These products clog the filters, reduce airflow and can
cause damage to the cleaner. Failure to clean the dust bin
could cause permanent damage to the cleaner.
• Do not use vacuum cleaner to pick up sharp hard
objects, small toys, pins, paper clips, etc.
They may damage the cleaner or dust bin.
• Store the vacuum cleaner indoors.
Put the vacuum cleaner away after use to prevent tripping
over it.
• The vacuum cleaner is not intended to use by young
children or infirm people without supervision.
Failure to do so could result in personal injury or product
damage.
• Only use parts produced or recommended by LG
Electronics Service Agents.
Failure to do so could result in product damage.
• Use only as described in this manual. Use only with
LG recommended or approved attachments and
accessories.
Failure to do so could result in personal injury or product
damage.
• To avoid personal injury and to prevent the machine
from falling when cleaning stairs, always place it at
the bottom of stairs.
Failure to do so could result in personal injury or product
damage.
• Use accessory nozzles in sofa mode.
Failure to do so could result in product damage.
• Don’t grasp the tank handle when you are moving
the vacuum cleaner.
The vacuum cleaner’s body may fall when separating tank
and body.Personal injury or product damage could result.
You should grasp the carrier handle when you are moving
the vacuum cleaner. (Page 10)
• If after emptying the dust tank the indicator light is
on(red), clean the dust tank.
Failure to do so could result in product damage.
• Make sure the filters (exhaust filter and motor safety
filter) are completely dry before replacing in the
machine.
Failure to do so could result in product damage.
• Do not dry the filter in an oven or microwave.
Failure to do so could result in fire hazard.
• Do not dry the filter in a clothes dryer.
Failure to do so could result in fire hazard.
• Do not dry near an open flame.
Failure to do so could result in fire hazard.
• Do not use filters that are not dried.
• If the power cord is damaged, it must be replaced
by an approved LG Electronics Service Agent to
avoid a hazard
• This appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do
not play with the appliance
Telescopic pipe
Hose handle
Spring latch
6
Telescopic pipe
• Push telescopic pipe firmly into hose handle.
• Grasp the spring latch to expand.
• Pull out the pipe to desired length.
Carpet and floor nozzle
(feature not available in all countries)
Push the nozzle into the telescopic pipe.
(feature not available
in all countries)
(feature not available
in all countries)
(feature not available
in all countries)
How to use
Assembling vacuum cleaner
Attachment point
Fitting pipe
Flexible hose
Button
7
Connecting the hose to the vacuum cleaner
Push the fitting pipe on the flexible hose
into the attachment point on the vacuum cleaner.
To remove the flexible hose from the vacuum
cleaner, press the button situated on the fitting pipe,
then pull the fitting pipe out of the vacuum cleaner.
Plug
Control knob
Indicator
Cord reel button
8
How to use
Operating vacuum cleaner
How to operate
• Pull out the power cord to the
desired length and plug into the
socket.
• Place the control knob of the
hose handle to the required
position.
• To turn off, slide control knob to
OFF position.
• Press the cord reel button to
rewind the power cord after use.
Indicator and alarm sound
• The indicator light of the hose
handle is on and alarm will
sound when dust tank is full.
After about 1 min 30 sec,
vacuum cleaner will turn itself off
and alarm will sound.
Empty the dust tank and reuse
the vacuum cleaner
Park mode
• To store during
vacuuming, for example
to move a small piece of
furniture or a rug, use
park mode to support the
flexible hose and nozzle.
- Slide the hook on the
nozzle into the slot on
the side of vacuum
cleaner.
Storage
• When you have
switched off and
unplugged the vacuum
cleaner, press the cord
reel button to
automatically rewind
the cord.
• You can store your
vacuum cleaner in a
vertical position by
sliding the hook on the
nozzle into the slot on
the underside of the
vacuum cleaner.
NOTICE
When indicator light flashes and alarm sounds :
1. Dust tank is full
slide handle knob to OFF position and empty dust tank
2. Power is on without dust tank
slide handle knob to OFF position and reattach dust tank
3. Rotating plate in the dust tank is restricted because of obstruction
slide handle knob to OFF position and remove obstruction
Pedal
-
CarpetCarpet
Floor
Floor
How to use
Using all floor nozzle and mini turbine nozzle
Mini turbine nozzle
(feature not available in all countries)
• Mini turbine is used for stairs and other hard to
reach places.
• To clean the mini turbine nozzle, remove the nozzle
cover :
Remove 2 screws on the bottom and take mini
turbine nozzle cover off as shown.
• Frequently clean and remove hair, string, and lint
build-up in the brush area. Failure to do so could
damage to mini turbine nozzle.
All floor nozzle
(feature not available in all countries)
• The 2 position nozzle
This is equipped with a pedal which allows you to alter
its position according to the type of floor to be cleaned.
• Carpet or rug position
Press the pedal ( ), then brush will rotate
• Hard floor position
Press the pedal ( ), then brush will stop rotating
• Cleaning all floor nozzle
• Open the cover by pulling the hook.
• Clean the hole and brush of the nozzle.
9
Dusting brush Crevice toolUpholstery nozzle
10
Upholstery nozzle
Upholstery nozzle is for vacuuming
upholstery, mattresses etc.
Dusting brush
Dusting brush is for vacuuming picture
frames, furniture frames, books and
other irregular surfaces.
Crevice tool
Crevice tool is for vacuuming in those
normally hard-to-reach places such as
reaching cobwebs or between the
cushions of a sofa.
• Accessory nozzles included in the "BOX" with
owner's manual.
How to use
Using accessory nozzles
NOTICE
Use accessory in the sofa mode
Push the button
Pull back the cover to
lock it into position.
< Upholstery nozzle mode > < Dusting brush mode >
• Crevice tool included in the
vacuum cleaner body.
• BOX •
How to use
Using the sani punch nozzle
11
Sani punch nozzle
(feature not available in all countries)
Set the suction power control switch to MAX POWER before vacuuming.
Depending on the type of bedding, handling may be awkward or it may cause a lot
of noise.
If this is the case, adjust the suction power control switch to a lower setting.
Features
This nozzle picks up even dust inside through beating.
The bottom part can be separated to be cleaned.
Since the bottom does not stick to the surface, vacuuming is
easy.
How to use
Follow the directions below for proper use.
Assembly
Connect the nozzle to the telescopic tube.
Effective cleaning
Bed & blanket
Bulky & heavy blanket
Light blanket & sheet
12
When using on the bed
Lay out the blanket and vacuum it on the bed
When using on the floor
It is easier to clean a light blanket or sheet
by pushing the nozzle in the direction of the arrow.
To increase cleaning efficiency for light blankets,
lay on top of a bulky blanket and then clean.
This Sani Punch nozzle is for effective cleaning of beds and blankets to remove mites and dust.
Top Bottom
13
Since the vibrator inside is composed of precision parts, never disassemble the body.
Be careful not to let foreign objects clog the air suction part on top of the vacuum nozzle.
Since removal of the punch bar may cause performance problems, do not warp or remove it.
Attach the bottom plate properly before using. Without this bottom plate, it may not function.
Since this vacuum nozzle has been made exclusively for cleaning beds, blankets and upholstery, use it only for
these cleaning purposes.
(Using it to clean the floor may result soiling it or a drop in performance, do not use it for such purposes.)
For simple cleaning of the vacuum nozzle, detach the Sani Punch nozzle from the telescopic tube and attach the crevice tool
to vacuum dust.
1 2 3
4 5 6
Bottom plate
Bottom plate
Punch bar
Punch bar
Press the button on
the rear side of the
vacuum nozzle to
separate the bottom
plate.
Wipe all the soiled parts
of the vacuum nozzle
body with a cloth.
Wash the removed bottom plate with water
and dry it.
Straighten the
punch bar on the
lower section.
Insert the attachment
projections on bottom
plate to the vacuum
nozzle grooves.
Push down the
tabs to secure.
14
Follow the instruction below for through washing.
(Do not soak the entire body of the vacuum nozzle in water, it may cause the vibrator to malfunction)
Loading...