LG UX830 User Guide

UX830

Guárdelo para consultarlo en el futuro. Lea este manual cuidadosamente antes de utilizar su teléfono.

ENGLISH

MANUAL DEL USUARIO

ESPAÑOL

UX830

USER GUIDE

UX830

Please read this manual carefully before operating your mobile phone. Retain it for future reference.

USER GUIDE

P/N : MMBB0282801(1.0)

Copyright ©2007 LG Electronics, Inc. All rights reserved. LG and the LG logo are registered trademarks of LG Group and its related entities. All other trademarks are the property of their respective owners.

Important Safety Precautions

Read these instructions. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user guide.

WARNING! Violation of the instructions may cause serious injury or death.

1. Never use an unapproved battery since this could damage the phone and/or battery and could cause the battery to explode.

2. Never place your phone in a microwave oven as it will cause the battery to explode.

3. Never store your phone in temperatures less than

-4°F or greater than 122°F.

4. Do not dispose of your battery by fire or with hazardous or flammable materials.

5. When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If wireless equipment is improperly installed and the air bag is deployed, you may be seriously injured.

6. Do not use a hand-held phone while driving.

7. Do not use the phone in areas where its use is prohibited. (For example: aircraft)

Important Safety Precautions

1. Do not expose the battery charger or adapter to direct sunlight or use it in places with high humidity, such as a bathroom.

2. Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean your phone. This

Important Safety Precautions

could cause a fire.

3. Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards of the phone.

4. Do not use your phone in high explosive areas as the phone may generate sparks.

5. Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if it is loose as it may cause a fire or electric shock.

6. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as it may cause electric shock or fire.

7. Do not handle the phone with wet hands while it is being charged. It may cause an electric shock or seriously damage your phone.

8. Do not disassemble the phone.

1. Do not place or answer calls while charging the phone as it may short-circuit the phone and/or cause electric shock or fire.

2. Do not hold or let the antenna come in contact with your body during a call.

3. Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with the battery. This could cause a fire.

4. Store the battery out of reach of children.

5. Be careful that children do not swallow any parts (such as rubber plugs, earphone, connection parts of the phone, etc.) This could cause asphyxiation or suffocation resulting in serious injury or death.

6. Unplug the power cord and charger during lightning storms to avoid electric shock or fire.

7. Only use the batteries and chargers provided by LG. The warranty will not be applied to products provided by other suppliers.

8. Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty.

9. Your service provider programs one or more emergency phone numbers, such as 911, that you can call under any circumstances, even when your phone is locked. Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues.

Important Safety Precautions

Table of Contents

Important Safety Precautions 1

Table of Contents 4

Welcome 9

Technical Details 10

FCC RF Exposure Information 12

Table of Contents

Bodily Contact During Operation 12 Vehicle-Mounted the External

Antenna 13 FCC Notice and Cautions 13

Phone Overview 14

Touch Sensitive Soft Keys 15 Touch Screen Shortcut Menu 17

Menus Overview 18

Menu Access 21

Getting Started with Your Phone 22

The Battery 22

Installing the Battery 22 Removing the Battery 22

Charging the Battery 22 Battery Charge Level 23 Turning the Phone On and Off 23

Turning the Phone On 23 Turning the Phone Off 23

Signal Strength 24 Screen Icons 24 Making Calls 24 Correcting Dialing Mistakes 25 Redialing Calls 25 Receiving Calls 25

Quick Access to Convenient Features 26

Lock Mode 26 Mute Function 26 Volume Quick Adjustment 26 Call Waiting 26 Caller ID 27 Speed Dialing 27

Entering and Editing Information 28

Text Input 28

Contacts in Your Phone’s Memory 29

The Basics of Storing Contacts Entries 29

Phone Numbers With Pauses 29

Storing a Number with Pauses 30 Adding a Pause to an Existing

Number 30

Searching Your Phone’s Memory 31 Accessing Options 31 Making a Call From Your Phone’s

Memory 32

Using Phone Menus 34

Recent Calls 34

1. Missed Calls 34

2. Received Calls 35

3. Dialed Calls 35

4. All Calls 35

5. Call Timer 35

6. Data 35

7. Data Counter 36

Contacts 36

1. New Contact 36

2. Contact List 37

3. Groups 37

4. Speed Dials 38

5. My Name Card 38

Messaging 39

1. New Text Message 39

2. New Picture Message 42

3. Inbox 43

4. Sent 45

5. Drafts 46

6. Voicemail 46

7. Quick-Text 47

8. Settings 47

9. Delete All 49

New Events Manager 50

easyedge 50

Table of Contents

1. easyedge 51

2. easyedge Info 51

Multimedia 52

Music 52

Shuffle 53

Take Photo 53

Image 55

Record Video 55

Video 57

Table of Contents

Record Voice 57

Audio 57

Tools 58

Voice Command 58

Alarm Clock 59

Calendar 59

World Clock 60

Calculator 60

Ez Tip Calc 61

Notepad 61

Unit Converter 62

Settings 63

Display 63

1. Wallpaper 63

2. Banner 63

3. Backlight 63

4. Languages 64

5. Clock & Calendar 64

6. Font Settings 64

7. Color Scheme 65

Sound & Touch 65

1. Ringers 65

2. Volume 66

3. Message Alert 66

4. Alert Type 66

5. Service Alerts 67

6. Power On/Off Tones 67

7. Slide Tone 68

8. Touch Key Feedback 68

9. Touch Calibration 68

Bluetooth

1. Power 69

2. Add New 70

3. Paired Devices 71

4. Settings 71

4.1 Power Off 71

4.2 Visibility Hidden 71

4.3 Device Name 71

4.4 Device Info 72

USB Connection 72

Security 74

1. Lock Phone 74

2. Restrictions 75

3. Emergency #s 75

4. Change Lock Code 76

5. Reset Default 76

Call Settings 77

1. Answer Options 77

2. End Options 77

3. Auto Retry 77

4. One-Touch Dial 78

5. Voice Privacy 78

6. Auto Volume 78

7. Airplane Mode 79

8. TTY Mode 79

System 80

1. Network 80

2. Location 81

Phone Information 82

1. My Number 82

2. ESN/MEID 82

3. Icon Glossary 82

4. Version 83

5. Memory 83

Safety 84

TIA Safety Information 84

Exposure to Radio Frequency Signal 84

Antenna Care 84 Phone Operation 85 Tips on Efficient Operation 85 Driving 85 Electronic Devices 85 Pacemakers 85 Persons with pacemakers: 86 Hearing Aids 86

Table of Contents

Other Medical Devices 86 Health Care Facilities 86 Vehicles 87 Posted Facilities 87 Aircraft 87 Blasting Areas 87 Potentially Explosive Atmosphere 87 For Vehicles Equipped with an

Air Bag 88

Safety Information 88

Table of Contents

Charger and Adapter Safety 88 Battery Information and Care 89 Explosion, Shock, and Fire Hazards 89 General Notice 90

Warning! Important safety information 92

Avoiding hearing damage 92 Using your phone safely 92 Avoiding hearing damage 93 Using headsets safely 93

FDA Consumer Update 94

10 Driver Safety Tips 104

Consumer Information on SAR 10 8

FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices 111

Accessories 114

Limited Warranty Statement 115

Index 119

Welcome

Thank you for choosing the UX830 cellular phone designed to operate with the latest digital mobile communication technology, Code Division Multiple Access (CDMA). Along with the many advanced features of the CDMA system, such as greatly enhanced voice clarity, this compact phone offers:

●

Music capability and microSD

™

card slot.

●

Significantly enhanced voice

clarity

●

Slim and sleek design with internal antenna (Internal antenna described as antenna throughout this user guide).

●

Large, easy-to-read, 9-line backlit LCD with status icons.

●

Paging, messaging, voice mail, and caller ID.

●

15-key keypad and Touch Screen.

●

Speakerphone feature.

●

Menu-driven interface with

prompts for easy operation and configuration.

●

Any key answer, auto answer, auto retry, one-touch and speed dialing with 99 memory locations.

●

Bilingual (English and Spanish) capabilities.

●

Bluetooth®wireless technology.

Note

The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners.

Welcome

Technical Details

Important Information

This user’s guide provides important information on the use and operation of your phone. Please read all the information carefully prior to using the phone for the best performance and to prevent any damage to or misuse of the phone. Any unapproved changes or modifications will void your warranty.

Technical Details

FCC Part 15 Class B Compliance

This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that causes undesired operation.

Technical Details

The UX830 is an all digital phone that operates on both Code Division Multiple Access (CDMA) frequencies: Cellular services at 800 MHz and Personal Communication Services (PCS) at

1.9 GHz. CDMA technology uses a feature

called DSSS (Direct Sequence Spread Spectrum) that enables the phone to keep communication from being crossed and to use one frequency channel by multiple users in the same specific area. This results in a 10-fold capacity increase when compared with analog mode. In addition, features such as soft / softer handoff, hard handoff, and dynamic RF power control technologies combine to reduce call interruptions.

The Cellular and PCS CDMA networks consist of MSO (Mobile Switching Office), BSC (Base Station Controller), BTS (Base Station Transmission System), and MS (Mobile Station).

* TSB-74: Protocol between an IS-

95A system and ANSI J-STD008

Its battery life is twice as long as IS-95. High-speed data

transmission is also possible. The following tab lists some

major CDMA standards.

CDMA Standard

Basic Air Interface

Network

Service

1x EV-DO Related

interface

Designator

TIA/EIA-95A TSB-74 ANSI J-STD-008 TIA/EIA-IS2000

TIA/EIA/IS-634 TIA/EIA/IS/651 TIA/EIA/IS-41-C TIA/EIA/IS-124

TIA/EIA/IS-96-B TIA/EIA/IS-637 TIA/EIA/IS-657 IS-801 TIA/EIA/IS-707-A

TIA/EIA/IS-856 TIA/EIA/IS-878

TIA/EIA/IS-866

TIA/EIA/IS-890

Description

CDMA Dual-Mode Air Interface

14.4kbps radio link protocol and interband operations IS-95 adapted for PCS frequency band CDMA2000 1xRTT Air Interface

MAS-BS PCSC-RS Intersystem operations Non-signaling data comm.

Speech CODEC Short Message Service Packet Data Position Determination Service (gpsOne) High Speed Packet Data

CDMA2000 High Rate Packet Data Air Interface

1xEV-DO Inter-Operability Specification for CDMA2000 Access Network Interfaces

Recommended Minimum Performance Standards for CDMA2000 High Rate Packet Data Access Terminal Test Application Specification (TAS) for High Rate Packet Data Air Interface

Technical Details

FCC RF Exposure Information

WARNING! Read this information before operating the phone.

In August 1996, the Federal Communications Commission (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for

Technical Details

human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards.

Bodily Contact During Operation

This device was tested for typical use with the back of the phone kept 0.79 inches (2.0 cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of

0.79 inches (2.0 cm) must be maintained between the user’s body and the back of the phone, including the antenna, whether extended or retracted. Thirdparty belt-clips, holsters, and similar accessories containing metallic components should not be used. Avoid the use of accessories that cannot maintain

0.79 inches (2.0 cm) distance between the user’s body and the back of the phone and have not been tested for compliance with FCC RF exposure limits.

Vehicle-Mounted the External Antenna

(Optional, if available.)

To satisfy FCC RF exposure requirements, keep 8 inches (20 cm) between the user / bystander and vehicle-mounted the external antenna. For more information about RF exposure, visit the FCC website at www.fcc.gov.

FCC Notice and Cautions

Any changes or modifications not expressly approved in this user guide could void your warranty for this equipment. Use only the supplied antenna. Use of unauthorized antennas (or modifications to the antenna) could impair call quality, damage the phone, void your warranty and/or violate FCC regulations.

Don't use the phone with a damaged antenna. A damaged antenna could cause a minor skin burn. Contact your local dealer for a replacement antenna.

Technical Details

Phone Overview

1.Earpiece Lets you hear the caller.

2. Slide Slide up to answer an incoming call and

slide it down to end the call.

3.LCD Screen Displays incoming calls, messages

and indicator icons as well as a wide variety of content you select to view.

4.TALK Key Use to place or answer calls.

5.Alphanumeric Keypad Use to enter numbers

and characters and select menu items.

Vibrate Mode Key

vibrate mode by pressing and holding the key

Microphone

8.BACK Key Deletes single spaces or characters

with a quick press, but press and hold to delete entire words. Will also back you out of menus, one level at a time.

9.PWR/END Key Use to turn the power on/off

and to end a call. Also returns to standby mode.

Lock Mode Key

10.

standby mode press and hold for about 3 seconds).

Camera Lens

11.

video. Keep it clean for optimal photo quality.

Flash

12.

In standby mode, set the

about 2 seconds.

Lets callers hear you.

Use to lock the phone (from

Used to take photos and record

When taking a picture, a light flashes.

microSD™card slot

(accommodates optional

™

card up to

microSD 4GB.) Insert microSD

card for external memory. Use LG-approved microSD the microSD you must remove the battery cover located on the back of your phone.

™

card. To access

™

card slot

™

Touch Sensitive Soft Keys

( , , , )

1. Make sure your hands are clean and dry. Remove moisture from the surface of your hands. Don't use the touch keys in a humid environment.

2. Touch key sensors are sensitive to your light touch. You don't need to press them forcefully to use them. Protect

1.HOLD Key Use to lock your phone

when the slide is closed. To unlock, press or slide up.

2.Earphone Jack Allows the use of a

headset to hear caller's voice.

3.Charger Port Connects the phone

to the battery charger or other available accessories.

4.Side Keys Use to adjust the ringer

volume in standby mode and the earpiece volume during a call.

5.Side Camera Key Use for quick

access to Camera functions.

your phone from severe impact because touch key sensors may become damaged from harsh use.

3. Use the tip of your finger to touch the center of a touch key. If you touch off-center it may activate the nearby function instead.

4. The touch sensor level can be adjusted to your preference.

Phone Overview

5. When both the outside LCD screen and touch key lights are off, touch keys are deactivated. Press the Unlock Key ( ) to turn on the Touch Screen and touch key lights.

6. If the slide is closed and the Touch Protection function is on, during calls the Touch Protection feature is

Phone Overview

automatically enabled.

7. Keep metal and other conductive material away from the surface of touch keys because contact may cause electronic interference.

WARNING

●

Do not put heavy objects on the Touch Screen.

●

Do not sit on your phone because it may damage the Touch Screen.

●

Do not drag or scratch your phone with any sharp materials.

●

Do not keep your phone in extreme conditions (places that are too humid, hot, or cold).

●

Keep chemicals away from your phone because they may change the cosmetic or functional features of your phone.

Warning! Do not sit on your phone or put heavy items on it as it may damage your phone.

The Touch Screen is a great way to interact with the UX830 software. Take a little time to become accustomed to using it. If it doesn’t react as you expect, adjust the Touch Screen calibration.

TIP

Keep in mind that the smaller the text appears on the screen, the smaller the area of touch activation. Try zooming the screen in, if available, to increase the touch area.

Touch Screen Shortcut Menu

The Touch Screen Shortcut Menu allows instant access to menus with the quick touch of your fingertip. To use the Shortcut Menu:

1. Touch on the screen (located above the Touch Soft Keys) from standby mode. You may need to touch first if the screen is locked.

2. The Shortcut Menu will open. Touch any of the options for quick access to frequently used applications.

3. To close the Shortcut Menu, touch or the Key.

Touch Soft Keys

From standby mode, touch the Touch Screen with your finger.

Menu: Displays

a list of menus.

Phone Overview

Phone: Displays additional touch keys so you

can make a call without opening the slide. Dial manually using the numeric keys or automatically from Recent Calls and Contacts.

Message:

Displays the Messaging menu.

Contacts:

Displays your Contact List.

Menus Overview

Recent Calls

1. Missed Calls

2. Received Calls

3. Dialed Calls

4. All Calls

5. Call Timer

1. Last Call

2. Home Calls

3. Roam Calls

4. All Calls

6. Data

7. Data Counter

1. Received Data

2. Sent Data

3. All Data

Contacts

1. New Contact

2. Contact List

3. Groups

4. Speed Dials

5. My Name Card

Messaging

1. New Text Message

2. New Picture Message

3. Inbox

4. Sent

5. Drafts

6. Voicemail

7. Quick-Text

8. Settings

1. All Messages

2. Text Message

3. Picture Message

4. Edit Voicemail#

9. Delete All

1. Delete Inbox

2. Delete Sent

3. Delete Drafts

4. Delete All Messages

New Events

Manager

easyedge

1. easyedge

2. easyedge Info

Music

1. All Songs

2. Playlists

3. Recently Played

4. Artists

5. Genres

6. Albums

Voice Command

Alarm Clock

Calendar

Shuffle

Take Photo

Image

Record Video

Video

Record Voice

Audio

World Clock

Menus Overview

Calculator

Ez Tip Calc

Notepad

Unit Converter

Menus Overview

Display

1. Wallpaper

2. Banner

3. Backlight

4. Languages

5. Clock & Calendar

6. Font Settings

7. Color Scheme

Menus Overview

Sound & Touch

1. Ringers

2. Volume

3. Message Alert

4. Alert Type

5. Service Alerts

6. Power On/Off Tones

7. Slide Tone

8. Touch Key Feedback

9. Touch Calibration

Bluetooth

1. Power

2. Add New

3. Paired Devices

4. Settings

USB Connection

1. USB Modem

2. USB Mass Storage

Security

1. Lock Phone

2. Restrictions

3. Emergency #s

4. Change Lock Code

5. Reset Default

Call Settings

1. Answer Options

2. End Options

3. Auto Retry

4. One-Touch Dial

5. Voice Privacy

6. Auto Volume

7. Airplane Mode

8. TTY Mode

System

1. Network

2. Location

Phone Information

1. My Number

2. ESN/MEID

3. Icon Glossary

4. Version

5. Memory

Menu Access

Touch the MENU Touch Key to have access to phone menus. To access the MENU, unlock first by pressing down the unlock key on the left side of your phone. To go back to standby mode, touch or press at the bottom center of your phone.

Menus Overview

Getting Started with Your Phone

The Battery

Note

It is important to fully charge the battery before initial use of the phone.

Getting Started with Your Phone

The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and standby time. The battery charge level is shown at the top of the LCD screen.

Installing the Battery

Insert the bottom of the battery into the opening on the back of the phone, then push the battery down until the latch clicks.

Removing the Battery

1. Turn off the phone, then push down on the battery cover button (located on the top of your phone).

2. While holding down the battery cover button, lift and remove the battery cover.

3. Lift the top of the battery out using the fingertip cutouts, then remove it.

Charging the Battery

To use the charger provided with your phone:

Warning! Use only the charger provided with the phone. Using any charger other than the one included with the UX830 may damage your phone or battery.

1. Plug the end of the adapter into the phone’s charger port and the other end into an electrical outlet.

2. The charge time varies depending upon the battery level.

Notice

Please make sure that the LG logo faces up before inserting a charger, data cable, etc into the charger port of your phone.

Battery Charge Level

The battery charge level is shown at the top right of the LCD screen. When the battery charge level becomes low, the low battery sensor alerts you in three ways: sounding an audible tone, blinking the battery icon, and displaying a warning message. If the battery charge level becomes exceedingly low, the phone automatically switches off and any function in progress is not saved.

Turning the Phone On and Off

Turning the Phone On

1. Install a charged battery or connect the phone to an external power source.

2. Open the slide to reveal the keypad.

3. Press for about 3 seconds until the LCD screen lights up.

Turning the Phone Off

1. Open the slide to reveal the keypad.

2. Press and hold until the display turns off.

Getting Started with Your Phone

Signal Strength

Call quality depends on the signal strength in your area. The signal strength is indicated on the screen as the number of bars

Getting Started with Your Phone

next to the signal strength icon

. The more bars, the better the signal strength. If the signal quality is poor, move to an open area. If you are in a building, the reception may be better near a window.

Note

The call quality is also affected by the places where you are and weather conditions with radio frequency (RF) emission changes.

Screen Icons

To see the icon glossary, touch

-> -> ->

Glossary

on your phone.

Icon

Making Calls

1. Make sure the phone is turned on. If not, press for about 3 seconds.

2. Enter the phone number (include the area code if needed).

3. Press or touch .

lf the phone is locked, press the Unlock Key on the left side of your phone.

Note

If the phone is restricted, you can only dial phone numbers saved in the Emergency Numbers or your Contact List. To turn off this function: -> Settings ->

Security -> Enter Lock Code. -> 2 Restrictions -> Enter Application Lock Code. -> 1 Calls -> 4 None

Call

4. Press or touch to

END

end the call.

Correcting Dialing Mistakes

If you make a mistake while dialing a number, press or touch once to erase the last digit entered, or hold down or touch and hold for at least 2 seconds to go to standby mode.

Redialing Calls

1. Press twice to redial the last number you dialed. The last 150 numbers (dialing, incoming, missed) are stored in the call history list and you can also select any of these to redial.

Receiving Calls

1. When the phone rings or vibrates, press to answer.

Tip

Call Settings Menu allows you to choose answer options:

Open Slide/ Press Any Key/ Press Send Key/ Auto Answer

Note

If you press or (the side keys), while the phone is ringing, the ringing or vibration is muted for that call.

2. Press to end the call.

Getting Started with Your Phone

Quick Access to Convenient Features

Lock Mode

Sets your phone to require a 4digit password in order to use the phone.

Quick Access to Convenient Features

Note

Until you change it, the default lock code/password is the last 4 digits of your phone number.

To quickly lock your phone press

for three seconds. To cancel, touch and enter the password.

Unlock

Mute Function

The Mute Function is used during a phone call. To quickly activate the Mute function, touch

and touch

Touch to mute and unmute.

Mute/ Unmute

- or -

Volume Quick Adjustment

Use the side keys to adjust the ringer volume in standby mode, and the earpiece volume during a call. The upper key increases the volume and the lower key decreases the volume.

Note

Keypad Volume is adjusted through the Sounds Volume Menu. ( -

Volume ->Keypad).

>->

Sound & Touch

Call Waiting

Your cellular service may offer call waiting. While a call is in progress, two beeps indicate another incoming call. When call waiting is enabled, you may put

the active call on hold while you answer the other incoming call. Check with your cellular service provider for information about this function.

1. Press to receive a waiting call.

2. Press again to switch between calls.

Caller ID

Caller ID displays the phone number or name of the incoming call. If the caller’s identity is stored in Contacts, the name will appear along with the phone number. Check with your service provider to ensure they offer this feature.

Speed Dialing

Speed dialing is a convenient feature that allows you to make phone calls quickly. A number key can be assigned to a specific phone number. By pressing and holding down a number key, your phone will recall the phone number associated from the Contact List and display it briefly

while simultaneously dialing that phone number for you. Speed Dial Number 1 is set to Voice Mailbox by default and is unchangeable.

Dialing Single Digit Speed Dials (from 2 to 9)

Press and hold the Speed Dial number.

OR Enter the Speed Dial number

and press .

Dialing Double Digit Speed Dials (from 10 to 99)

Press the first digit and then press and hold the key of the second digit.

OR Enter the first and second

digits and press .

Quick Access to Convenient Features

Entering and Editing Information

Text Input

You can enter information using the Touch Screen or the keypad. Each has special key functions to help you with text entry.

Using the Touch Screen

Entering and Editing Information

When creating a Text, Picture or Video message using the outside LCD, the Touch Screen provides you with Touch Keys specific to the type of field.

+ 93 hidden pages