LG UX220 User Manual [en, es]

LG-UX220

Printed in China

P/NO : MMBB0366701(1.1)

Copyright ©2010 LG Electronics, Inc. All rights reserved. LG and the LG logo are registered trademarks of LG Group and its related entities. All other trademarks are the property of their respective owners.

Important Safety Precautions

Read these instructions. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user guide.

WARNING! Violation of the instructions may cause serious injury or death.

1. Never use an unapproved battery since this could damage the phone and/or battery and could cause the battery to explode.

2. Never place your phone in a microwave oven as it will cause the battery to explode.

3. Never store your phone in temperatures less than

-4°F or greater than 122°F.

4. Do not dispose of your battery by fire or with hazardous or flammable materials.

5. When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If wireless equipment is improperly installed and the air bag is deployed, you may be seriously injured.

6. Do not use a hand-held phone while driving.

7. Do not use the phone in areas where its use is prohibited. (For example: aircraft)

Important Safety Precautions

1. Do not expose the battery charger or adapter to direct sunlight or use it in places with high humidity, such as a bathroom.

2. Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean your phone. This

Important Safety Precautions

could cause a fire.

3. Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards of the phone.

4. Do not use your phone in high explosive areas as the phone may generate sparks.

5. Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if it is loose as it may cause a fire or electric shock.

6. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as it may cause electric shock or fire.

7. Do not handle the phone with wet hands while it is being charged. It may cause an electric shock or seriously damage your phone.

8. Do not disassemble the phone.

1. Do not place or answer calls while charging the phone as it may short-circuit the phone and/or cause electric shock or fire.

2. Do not hold or let the antenna come in contact with your body during a call.

3. Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with the battery. This could cause a fire.

4. Store the battery out of reach of children.

5. Be careful that children do not swallow any parts (such as rubber plugs, earphone, connection parts of the phone, etc.) This could cause asphyxiation or suffocation resulting in serious injury or death.

6. Unplug the power cord and charger during lightning storms to avoid electric shock or fire.

7. Only use the batteries and chargers provided by LG. The warranty will not be applied to products provided by other suppliers.

8. Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty.

9. Your service provider programs one or more emergency phone numbers, such as 911, that you can call under any circumstances, even when your phone is locked. Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues.

Important Safety Precautions

Important Safety Precautions 1

Table of Contents 4

Welcome 9

Technical Details 10

Important Information 10

Table of Contents

FCC Part 15 Class B Compliance 10

Technical Details 10

FCC RF Exposure Information 12

Bodily Contact During Operation 12

Vehicle-Mounted the External Antenna 13

FCC Notice and Cautions 13

Caution 14

Part 15.19 statement 14

Part 15.21 statement 14

Part 15.105 statement 15

Phone Overview 16

Menus Overview 18

Getting Started with Your Phone 21

The Battery 21

Installing the Battery 21

Removing the Battery 21

Charging the Battery 22

Battery Charge Level 22

Turning the Phone On and Off 23

Turning the Phone On 23

Turning the Phone Off 23

Signal Strength 23

Screen Icons 24

Making Calls 24

Correcting Dialing Mistakes 25

Redialing Calls 25

Receiving Calls 25

Quick Access to Convenient Features 26

Lock Mode 26

Mute Function 26

Quick Volume Adjustments 26

Call Waiting 26

Caller ID 27

Speed Dialing 27

Entering and Editing Information 28

Text Input 28

Key Functions 28

Contacts in Your Phone’s Memory 29

The Basics of Storing Contacts Entries 29

Phone Numbers With Pauses29

Storing a Number with Pause or Wait 30

Adding a Pause or Wait to an Existing Number 30

Searching Your Phone’s Memory 31

Scrolling Through Your Contacts 31

Contacts Options 31

Making a Call From Your Phone’s Memory 32

Phone Menus 34

Contacts 34

1. New Contact 34

2. Contact List 35

3. Groups 35

4. Speed Dials 36

5. My Name Card 36

Messaging 37

1. New Message 37

2. Inbox 39

3. Sent 40

4. Drafts 41

5. Voicemail 42

6. Templates 42

7. Settings 43

8. Delete All 44

Call History 45

1. Missed Calls 45

2. Received Calls 45

Table of Contents

3. Dialed Calls 45

4. All Calls 45

5. Call Timer 46

6. Data Counter 46

Multimedia 46

1. Record Voice 46

2. Images 47

3. Audios 47

4. Shuffle 49

Table of Contents

easyedge

1. easyedge 50

Tone Room 50

Bluetooth

1. Paired Devices 51

2. Power 52

3. My Visibility 52

4. My Bluetooth Name 53

5. My Bluetooth Info 53

Tools 53

1. Voice Command 53

1.1 Start Command 54

1.1.1 Call <Name> or <Number> 54

1.1.2 Voicemail 54

1.1.3 Missed Calls 54

1.1.4 Messages 54

1.1.5 Time & Date 54

1.1.6 Help 54

1.2 Command Mode 55

1.3 Announce Alert 55

1.4 Train Word 55

1.5 Best Match 55

2. My Menu 56

3. Alarm Clock 56

4. Calendar 57

5. Ez Tip Calc 57

6. Notepad 57

7. Calculator 58

8. World Clock 59

9. Stopwatch 59

0. Unit Converter 59

Settings 60

1. Sound 60

1.1 Ringers 60

1.2 Volume 60

1.3 Message Alerts 60

1.4 Alert Type 61

1.5 Service Alerts 61

1.6 Power On/Off Tone 62

1.7 Flip Tone 62

2. Display 62

2.1 Wallpaper 62

2.2 Banner 63

2.3 Backlight 63

2.4 Menu Style 63

2.5 Languages 63

2.6 Clocks & Calendar 64

2.7 Font Settings 64

2.8 Name Match for Dialing 64

3. Security 65

3.1 Lock Phone 65

3.2 Restrictions 65

3.3 Emergency #s 66

3.4 Change Lock Code 66

3.5 Master Reset 67

4. Call Settings 67

4.1 Answer Options 67

4.2 Auto Retry 68

4.3 One-Touch Dial 68

4.4 Voice Privacy 68

4.5 Airplane Mode 69

4.6 TTY Mode 69

5. System 69

5.1 Network 69

5.2 Location 70

6. Memory 71

7. Phone Info 71

Safety 72

TIA Safety Information 72

Exposure to Radio Frequency Signal 72

Antenna Care 72

Table of Contents

Phone Operation 73

Tips on Efficient Operation 73

Driving 73

Electronic Devices 73

Pacemakers 74

Persons with pacemakers: 74

Hearing Aids 74

Other Medical Devices 74

Health Care Facilities 75

Table of Contents

Vehicles 75

Posted Facilities 75

Aircraft 75

Blasting Areas 75

Potentially Explosive Atmosphere 75

For Vehicles Equipped with an Air Bag 76

Safety Information 76

Charger and Adapter Safety 77

Battery Information and Care 78

Explosion, Shock, and Fire Hazards79

General Notice 79

Warning! Important safety information 81

Avoiding hearing damage 81

Using your phone safely 81

Avoiding hearing damage 82

Using headsets safely 82

FDA Consumer Update 82

10 Driver Safety Tips 93

Consumer Information on SAR 96

FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices 99

Accessories 103

Limited Warranty Statement 104

Index 108

Some content in this user guide may differ from your phone depending on the phone software. Features and specifications are subject to change without prior notice.

Welcome

Thank you for choosing the UX220 cellular phone; designed to operate with the latest digital mobile communication technology, Code Division Multiple Access (CDMA). Along with the many advanced features of the CDMA system, such as greatly enhanced voice clarity, this compact phone offers:

●

Slim and sleek design with internal antenna (Internal antenna described as antenna throughout this user guide).

●

Easy-to-read, backlit LCD with status icons.

●

Messaging, voice mail, and caller ID capabilities.

●

24-key keypad.

●

Speakerphone feature.

●

Menu-driven interface with

prompts for easy operation and configuration.

●

Any Key answer, Auto Answer, Auto Retry, One-Touch and Speed Dialing (with 99 memory locations).

●

Bilingual (English and Spanish)

capabilities.

●

Bluetooth®wireless technology.

Note

The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners.

Welcome

Technical Details

Important Information

This user’s guide provides important information on the use and operation of your phone. Please read all the information carefully prior to using the phone for the best performance and to prevent any damage to or misuse of the phone. Any unapproved changes or modifications will void your

Technical Details

warranty.

FCC Part 15 Class B Compliance

This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received,

including interference that causes undesired operation.

Technical Details

The UX220 is a trimode phone that operates on among (Code Division Multiple Access CDMA) frequencies: cellular services at 800 MHz, (Personal Communication Services PCS) at

1.9 GHz and AWS (Advanced Wireless Services).

CDMA technology uses a feature called DSSS (Direct Sequence Spread Spectrum) that enables the phone to keep communication from being crossed and to use one frequency channel by multiple users in the same specific area. This results in a 10-fold capacity increase when compared with analog mode. In addition, features such as soft / softer

handoff, hard handoff, and dynamic RF power control technologies combine to reduce

CDMA Standard

Basic Air Interface

Network

Designator

TIA/EIA-95A TSB-74 ANSI J-STD-008 TIA/EIA-IS2000 ANSI TIA/EIA 553A

TIA/EIA/IS-634 TIA/EIA/IS/651 TIA/EIA/IS-41-C TIA/EIA/IS-124

call interruptions.

The Cellular and PCS CDMA networks consist of MSO (Mobile

Description

CDMA Dual Mode Air Interface

14.4kbps radio link protocol and interband operations IS-95 adapted for PCS frequency band cdma2000 1xRTT AirInterface

MAS-BS PCSC-RS Intersystem operations Non-signaling data comm.

Technical Details

Service

Performance

TIA/EIA/IS-96-B TIA/EIA/IS-637 TIA/EIA/IS-657 IS-801 TIA/EIA/IS-707-A

TIA/EIA/IS-97 TIA/EIA/IS-98 ANSI J-STD-018 ANSI J-STD-019 TIA/EIA/IS-125

Speech CODEC Short message service Packet Data Position Determination Service (gpsOne) High Speed Packet Data

Cellular base station Cellular mobile station PCS personal station PCS base station Speech CODEC

Technical Details

Switching Office), BSC (Base Station Controller), BTS (Base Station Transmission System), , MS (Mobile Station) and AWS (Advanced Wireless Services).

* TSB-74: Protocol between an

IS-95A system and ANSI JSTD-008

1xRTT system receives twice as many subscribers in the wireless

Technical Details

section as IS-95. Its battery life is twice as long as IS-95. Highspeed data transmission is also possible.

The following table lists some major CDMA standards.

FCC RF Exposure Information

WARNING! Read this information before operating the phone.

In August 1996, the Federal Communications Commission (FCC) of the United States, with

its action in Report and Order FCC 96-326, adopted an updated safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards.

Bodily Contact During Operation

This device was tested for typical use with the back of the phone kept 0.79 inches (2.0 cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of

0.79 inches (2.0 cm) must be maintained between the user’s

body and the back of the phone, including the antenna, whether extended or retracted. Thirdparty belt-clips, holsters, and similar accessories containing metallic components should not be used. Avoid the use of accessories that cannot maintain

0.79 inches (2.0 cm) distance between the user’s body and the back of the phone and have not been tested for compliance with FCC RF exposure limits.

Vehicle-Mounted the External Antenna

(Optional, if available.)

To satisfy FCC RF exposure requirements, keep 8 inches (20 cm) between the user / bystander and vehicle-mounted the external antenna. For more information about RF exposure, visit the FCC website at www.fcc.gov.

FCC Notice and Cautions

Any changes or modifications not expressly approved in this user guide could void your warranty for this equipment. Use only the supplied antenna. Use of unauthorized antennas (or modifications to the antenna) could impair call quality, damage the phone, void your warranty and/or violate FCC regulations.

Don't use the phone with a damaged antenna. A damaged

Technical Details

antenna could cause a minor skin burn. Contact your local dealer for a replacement antenna.

Caution

Use only the supplied and approved antenna. Use of unauthorized antennas or modifications could impair call quality, damage the phone, void your warranty and/or result in

Technical Details

violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin a minor burn may result. Contact your local dealer for a replacement antenna.

Part 15.19 statement

This device and its accessories comply with part15 of FCC rules. Operation is subject to the following two conditions:

(1) This device & its accessories

may not cause harmful interference.

(2) This device & its accessories

must accept any interference received, including interference that may cause undesired operation.

Part 15.21 statement

Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment.

Part 15.105 statement

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Technical Details

Phone Overview

1. Earpiece Lets you hear the caller.

2. LCD Screen Displays messages and indicator icons.

When the phone is turned on, Power Save mode automatically dims the screen and then darkens it if no keys are pressed.

3. Left Soft Key Use to access the Messaging menu

from the standby screen, or the function immediately above it.

4. Speakerphone Key Use to turn Speaker On or Off.

5. SEND Key Use to place or answer calls.

6. Alphanumeric Keypad Use to enter numbers and

characters and select menu items.

Vibrate Mode Key

From standby mode, press and hold for about 2 seconds.

8. Navigation Key Use to navigate through menus and

options. When on the Standby screen, use for quick access to Bluetooth, My Menu, Calendar and easyedge.

9. Right Soft Key Use to access the Contacts menu

from the standby screen, or the function immediately above it.

10.

Menu/OK

Menu and also selects the highlighted choice when navigating through a menu or function.

11. Voice Command When in standby mode, use to

start the Voice Command feature.

12. PWR/END Key Use to turn the power on/off and

to end a call. Also, use to exit from any function and return to the standby menu.

13. CLR Key Deletes single spaces or characters with a

quick press, but press and hold to delete the text ent menus, one le

14.

Lock Mode Key

standby mode, press and hold for about 2 seconds.

Use to set Vibrate Only mode.

Key Lets you access the phone's main

ered in a text field. Will also back you out of

vel at a time.

Use to lock the phone from

1. Earphone Jack Allows the use of a hands-free

headset.

2. Side Volume Keys Use to adjust the ringer volume

in standby mode and the earpiece volume during a call.

3. Charger/Accessory Port Connects the phone to

the battery charger or other available accessories.

Charging with PC USB

You can use your computer to charge your phone. Connect one end of a USB cable to the charging accessory port on your phone and the other end to a powered USB port on your PC (commonly located on the front panel of the computer).

Phone Overview

Menus Overview

Menu Access

While in standby mode, press Menu to access the phone menus. There are two methods of browsing menus and submenus:

●

Use the navigation key to highlight a menu/option and to select it.

●

Press a number key on the keypad that to activate the corresponding menu/option.

Menus Overview

Contacts

1. New Contact

2. Contact List

3. Groups

4. Speed Dials

5. My Name Card

Messaging

1. New Message

2. Inbox

3. Sent

4. Drafts

5. Voicemail

6. Templates

7. Settings

1. Auto View

2. Auto Play

3. Auto Save

4. Auto Delete

5. Callback #

6. Entry Mode

7. Signature

8. Edit Voicemail #

8. Delete All

1. Inbox

2. Sent

3. Drafts

4. All Messages

Call History

1. Missed Calls

2. Received Calls

3. Dialed Calls

4. All Calls

5. Call Timer

6. Data Counter

Multimedia

1. Record Voice

2. Images

3. Audios

4. Shuffle

easyedge

Tone Room

Bluetooth

1. Paired Devices

2. Power

3. My Visibility

4. My Bluetooth Name

5. My Bluetooth Info

Tools

1. Voice Command

1. Start Command

2. Command

Mode

3. Announce Alert

4. Train Word

5. Best Match

2. My Menu

3. Alarm Clock

4. Calendar

5. Ez Tip Calc

6. Notepad

7. Calculator

8. World Clock

9. Stopwatch

0. Unit Converter

Settings

1. Sound

1. Ringers

1. All Calls

2. Caller ID

3. No Caller ID

4. Restricted Calls

5. Shuffle

2. Volume

1. Master Volume

2. Keypad

3. Earpiece

4. Speaker

3. Message Alerts

1. Text Message

2. Voicemail

3. Message Reminder

4. Alert Type

5. Service Alerts

1. Minute Beep

2. Call Connect

3. Back to Top

4. Low Battery

6. Power On/Off Tone

7. Flip Tone

2. Display

1. Wallpaper

1. Main Screen

2. Front Screen

3. Shuffle

2. Banner

3. Backlight

1. Display

2. Keypad

Menus Overview

4. Menu Style

5. Languages

6. Clocks & Calendar

1. Main Screen

2. Front Screen

7. Font Settings

1. Font Type

2. Dial Font Size

8. Name Match for Dialing

3. Security

1. Lock Phone

2. Restrictions

3. Emergency #s

4. Change Lock Code

5. Master Reset

4. Call Settings

1. Answer Options

2. Auto Retry

3. One-Touch Dial

4. Voice Privacy

5. Airplane Mode

6. TTY Mode

5. System

1. Network

1. System Select

2. Set NAM

3. Auto NAM

4. Serving System

2. Location

6. Memory

1. Reserved Memory

2. Multimedia

7. Phone Info

1. My Number

2. ESN/MEID

3. Icon Glossary

4. Version

Getting Started with Your Phone

The Battery

Note

It is important to fully charge the battery before initial use of the phone.

The phone comes with a rechargeable battery. The battery charge level is shown at the top of the LCD screen.

Installing the Battery

Remove the batter cover by pressing down on the top part of the cover, and sliding the cover down. Align the battery with the terminals near the bottom of the phone, then snap the rest of the battery into place. Align the battery cover then slide it upward until it clicks into place.

Removing the Battery

Turn the phone off. Slide the battery cover downward, to remove it. Use the opening near the top of the battery compartment to lift the battery out.

Getting Start ed with Your Phone

Getting Started with Your Phone

Charging the Battery

Use the charger provided with your phone:

Warning! Use only the charger provided with the phone. Using

Getting Start ed with Your Phone

any charger other than the one included with the UX220 may damage your phone or battery.

Notice

Please make sure that the 'B' Side faces up before inserting a charger or data cable into the charger port of your phone.

1. Plug the end of the adapter into the phone’s charger port and the other end into an electrical outlet.

2. The charge time varies depending upon the battery level.

Battery Charge Level

The battery charge level is shown at the top right of the LCD screen. When the battery charge level becomes low, the low battery sensor alerts you in up to three ways: sounding an audible tone, blinking the battery icon, and displaying a warning message. If the battery charge level becomes exceedingly low, the phone automatically switches off and any function in progress is not saved.

Turning the Phone On and Off

Turning the Phone On

1. Install a charged battery or connect the phone to an external power source.

2. Press for about 2 seconds until the LCD screen lights up.

Turning the Phone Off

1. Press and hold until the display turns off.

Signal Strength

Call quality depends on the signal strength in your area. The signal strength is indicated on the screen as the number of bars on the signal strength icon the more bars, the better the signal strength. If the signal quality is poor, move to an open area. If you are in a building, the reception may be better near a window.

Note

The call quality may also be affected by the places where you are and weather/ambient conditions.

Getting Start ed with Your Phone

Getting Started with Your Phone

Screen Icons

To see the icon glossary, go to

Settings

Icon Glossary

Getting Start ed with Your Phone

Making Calls

1. With the phone turned on, open the flip.

lf the phone is locked, press the Left Soft Key enter the lock code (the last 4 digits of your phone number by default and it's changeable in Settings menu).

2. Enter the phone number (include the area code if needed).

3. Press .

Phone Info

on your phone.

Unlock

Note

If outgoing calls are restricted, you can only dial phone numbers saved in the Emergency Numbers or your Contact List. To turn off this function:

Menu -> Settings ->

Security -> Lock Code

-> -> Restrictions ->

Lock Code -> ->

Outgoing Calls -> Allow

All

4. Press to end the call.

Correcting Dialing Mistakes

If you make a mistake while dialing a number, press once to erase the last digit entered, or hold down for at least 2 seconds to go back to standby mode.

Redialing Calls

1. Press twice to redial the number from the most recent call. The last 120 calls (40 missed, 40 received and 40 dialed) are stored in the call history list, any of which you can select to redial.

Receiving Calls

1. When the phone rings and/or vibrates, press to answer, or open the flip (depending on your Answer Options).

Tip

To choose Answer Options:

Settings

Call Settings Options

Choose from the following options:

Flip Open/ Any Key/ SEND Key Only/ Auto Answer

Note

If you press or (the side keys), while the phone is ringing, the ringing and/or vibration is muted for that call.

2. Press to end the call.

Answer

Getting Start ed with Your Phone

Quick Access to Convenient Features

Lock Mode

Sets your phone to require a 4digit Lock Code in order to use the phone.

Quick Access to Convenient Features

Note

Until you change it, the default lock code/password is the last 4 digits of your phone number.

To quickly lock your phone, press

for three seconds. To

unlock, press Left Soft Key Unlock, enter the Lock Code and press .

Mute Function

The Mute Function is used during a phone call. To quickly activate Mute, press Left Soft Key to cancel press Left Soft Key Unmute.

Mute, then

Quick Volume Adjustments

Use the side keys to adjust the ringer volume while in standby mode, and the earpiece volume during a phone call. The upper key increases the volume and the lower key decreases the volume.

Note

Keypad Volume is adjusted through the Sound Volume menu:

Menu Sound -

Keypad -> Use to adjust

volume and press .

Settings -

Volume -

> >

Call Waiting

Your service provider may offer call waiting. While a call is in progress, a beep will notify you of another incoming call. When call waiting is enabled, you may put the active call on hold while you answer the other incoming

call. Check with your cellular service provider for information about this function.

1. Press to answer a waiting call.

2. Press again to switch between calls.

Caller ID

Caller ID displays the phone number or name of the incoming call. If the caller’s number is stored in Contacts, the name will appear along with the phone number. Check with your service provider to ensure they offer this feature.

Speed Dialing

Speed dialing is a convenient feature that allows you to make phone calls quickly. A number key can be assigned to a specific phone number. By pressing and holding down a number key, your phone will recall the phone

number associated from the Contact List and display it briefly while simultaneously dialing that phone number for you. Speed Dial Number 1 is set to Voice Mailbox by default and is unchangeable.

Dialing Single Digit Speed Dials (from 2 to 9)

Press and hold the Speed Dial number.

Enter the Speed Dial number and press .

Dialing Double Digit Speed Dials (from 10 to 99)

Press the first digit and then press and hold the key of the second digit.

Enter the first and second digits and press .

Quick Access to Convenient Features

Entering and Editing Information

Text Input

You can customize and enter text in many of the functions in your phone, including, but not limited to: the Banner, Calendar,

Entering and Editing Information

Contacts and more. While entering text, the following are your options:

Key Functions

Left Soft Key: Press to select one of the following text input modes: T9 Word: T9WORD/ T9Word/ T9word

Abc: ABC/ Abc/ abc 123 Symbols

Shift Key

capitalization of: T9 text : T9Word -> T9WORD -> T9word Abc : Abc -> ABC -> abc

Next: In T9 mode, press to switch to the next matching word.

Space: Press to complete a word and insert a space.

Clear: Press to delete a single space or character. Hold to delete the whole message.

Punctuation: When entering text or numbers, press to enter punctuation marks or some of the available special characters.

: Press to change

+ 198 hidden pages