This user guide contains important
information on the use and operation of
this phone. Please read all the information
carefully for optimal performance and
to prevent any damage to or misuse of
the phone. Any changes or modifications
not expressly approved in this user
guide could void your warranty for this
equipment.
Before You Start
Safety Instructions
WARNING!
To reduce the possibility of
electric shock, do not expose your phone
to high humidity areas, such as the bathroom, swimming pool, etc.
Always store your phone away from
heat. Never store your phone in settings
that may expose it to temperatures less
than 32°F or greater than 104°F, such
as outside during extreme weather
conditions or in your car on a hot day.
Exposure to excessive cold or heat will
result in malfunction, damage and/or
catastrophic failure.
6
Be careful when using your phone
near other electronic devices. RF
emissions from your mobile phone may
affect nearby in adequately shielded
electronic equipment. You should consult
with manufacturers of any personal
medical devices such as pacemakers
and hearing aides to determine if they
are susceptible to interference from your
mobile phone. Turn off your phone in a
medical facility or at a gas station. Never
place your phone in a microwave oven as
this will cause the battery to explode.
Safety Information
Read these simple guidelines. Breaking
the rules may be dangerous or illegal.
Further detailed information is given in
this user guide.
v
Never use an unapproved battery since
this could damage the phone and/or
battery and could cause the battery to
explode.
v
Never place your phone in a microwave
oven as it will cause the battery to
explode.
v
Do not dispose of your battery by fire or
with hazardous or flammable materials.
v
Make sure that no sharp-edged items
come into contact with the battery.
There is a risk of this causing a fire.
v
Store the battery in a place out of reach
of children.
v
Be careful that children do not
swallow any parts such as rubber
plugs (earphone, connection parts
of the phone, etc.). This could cause
asphyxiation or suffocation.
v
Unplug the power cord and charger
during lightning storms to avoid electric
shock or fire.
v
When riding in a car, do not leave your
phone or set up the hands-free kit near
to the air bag. If wireless equipment is
improperly installed and the air bag is
activated, you may be seriously injured.
v
Do not use a hand-held phone while
driving.
v
Do not use the phone in areas where
its use is prohibited. (For example:
aircraft).
v
Do not expose the battery charger or
adapter to direct sunlight or use it in
places with high humidity, such as a
bathroom.
v
Never store your phone in temperatures
less than- 4°F or greater than 122°F.
v
Do not use harsh chemicals(such as
alcohol, benzene, thinners, etc.) or
detergents to clean your phone. There
is a risk of this causing a fire.
v
Do not drop, strike, or shake your
phone severely. Such actions may harm
the internal circuit boards of the phone.
v
Do not use your phone in high explosive
areas as the phone may generate
sparks.
v
Do not damage the power cord by
bending, twisting, pulling, or heating.
Do not use the plug if it is loose as it
may cause a fire or electric shock.
v
Do not place any heavy items on the
power cord. Do not allow the power
cord to be crimped as it may cause fire
or electric shock.
7
For Your Safety
v
Do not handle the phone with wet
hands while it is being charged. It may
cause an electric shock or seriously
damage your phone.
v
Do not disassemble the phone.
v
Do not place or answer calls while
charging the phone as it may shortcircuit the phone and/or cause electric
shock or fire.
v
Only use the batteries, antennas, and
chargers provided by LG. The warranty
will not be applied to products provided
by other suppliers.
v
Only authorized personnel should
service the phone and its accessories.
Faulty installation or service may
result in accidents and consequently
invalidate the warranty.
v
Do not hold or let the antenna come in
contact with your body during a call.
v
An emergency call can be made only
within a service area. For an emergency
call, make sure that you are within
a service area and that the phone is
turned on.
8
v
Use accessories, such as earphones
and headsets, with caution. Ensure that
cables are tucked away safely and do
not touch the antenna unnecessarily.
Memory card information and
care
v
Always insert/ remove the memory card
while the handset power is off. If you
remove it while the power is on, it may
be damaged.
v
If a damage cannot be fixed, format the
memory card.
v
The memory card cannot be used for
recording copyrightprotected data.
v
Do not write forcefully on the memo
area.
v
Carry and store the memory card in
its case.
v
Do not allow the memory card to get
wet.
v
Do not leave the memory card in
extremely hot location.
v
Do not disassemble or modify the
memory card.
FCC RF Exposure Information
WARNING!
Read this information before
operating the phone.
In August 1996, the Federal
Communications Commission (FCC)
of the United States, with its action
in Report and Order FCC 96- 326,
adopted an updated safety standard
for human exposure to radio frequency
(RF) electromagnetic energy emitted
by FCC regulated transmitters. Those
guidelines are consistent with the safety
standard previously set by both U.S. and
international standards bodies.
The design of this phone complies with
the FCC guidelines and these international
standards.
CAUTION
Use only the supplied and approved
antenna. Use of unauthorized antennas
or modifications could impair call
quality, damage the phone, void your
warranty and/or result in violation of FCC
regulations. Do not use the phone with a
damaged antenna. If a damaged antenna
comes into contact with skin, a minor
burn may result. Contact your local dealer
for a replacement antenna.
Body-worn Operation
This device was tested for typical bodyworn operations with the back of the
phone kept 0.6 inches (1.5cm) between
the user’s body and the back of the
phone. To comply with FCC RF exposure
requirements, a minimum separation
distance of 0.6 inches(1.5cm) must be
maintained between the user s body and
the back of the phone. Third-party beltclips, holsters, and similar accessories
containing metallic components should
not be used.
Body-worn accessories that cannot
maintain 0.6 inches(1.5cm) separation
distance between the user’s body and
the back of the phone, and have not been
tested for typical body-worn operations
may not comply with FCC RF exposure
limits and should be avoided.
9
For Your Safety
Vehicle Mounted External
Antenna (optional, if available)
A minimum separation distance of 8
inches (20cm) must be maintained
between the user/bystander and the
vehicle mounted external antenna to
satisfy FCC RF exposure requirements.
For more information about RF exposure,
visit the FCC website at www.fcc.gov
FCC Part 15 Class B Compliance
This device and its accessories comply
with part 15 of FCC rules. Operation is
subject to the following two conditions: (1)
This device and its accessories may not
cause harmful interference, and (2) this
device and its accessories must accept
any interference received, including
interference that may cause undesired
operation.
10
Cautions for Battery
v
Do not disassemble.
v
Do not short-circuit.
v
Do not expose to high temperature:
60°C (140°F).
v
Do not incinerate.
Battery Disposal
v
Please dispose of your battery properly
or bring to your local wireless carrier
for recycling.
v
Do not dispose in fire or with hazardous
or flammable materials.
Adapter (Charger) Cautions
v
Using the wrong battery charger could
damage your phone and void your
warranty.
v
The adapter or battery charger is
intended for indoor use only.
Do not expose the adapter or battery
charger to direct sunlight or use it in
places with high humidity, such as the
bathroom.
Avoid damage to your hearing
v
Damage to your hearing can occur
if you are exposed to loud sound for
long periods of time. We therefore
recommend that you do not turn on or
off the handset close to your ear. We
also recommend that music and call
volumes are set to a reasonable level.
v
If you are listening to music whilst
out and about, please ensure that the
volume is at a reasonable level so that
you are aware of your surroundings.
This is particularly imperative when
attempting to cross the street.
11
157.805
Your Phone
Phone Components
5. Display screen
1. Left soft key
2. Send key
3. Side keys
4. Alpha numeric keys
12
6. Navigation key
7. OK key
8. Right soft key
9. Message key
10. Camera key
11. End / Power key
12. Clear key
Your Phone’s Features
1, 8. Left soft key/Right soft key: Each
of these keys performs the functions
indicated by the text on the display
immediately above them.
2. Send key: You can dial a phone
number and answer incoming calls.
Press this key in standby mode
to quickly access the most recent
incoming, outgoing and missed calls
quickly.
3. Side keys: These keys are used
to control the volume of the ring in
standby mode and speaker volume
during a call.
4. Alpha numeric keys: These keys are
used to dial a number in standby mode
and to enter numbers or characters in
edit mode.
5. Display screen: Displays phone status
icons, menu items, Web information,
pictures and more in full color.
6. Navigation key: Use for quick access
to phone functions.
7. OK key: Press this key in standby
mode to access the main menu.
Allows you to select and confirm menu
options.
9. Message key: Use to retrieve or send
text messages.
10. Camera key: Press this key to use
the camera feature or to go directly to
camera mode.
11. End/Power key: Allows you to power
the phone on or off, end calls, or
return to Standby Mode.
12. Clear key: Allows you to delete the
characters entered or to go back to
the previous screen.
13
Your Phone
157.805
157.805
Camera
Removable
memory port
Headset jack
Side keys
v
Control the volume
v
Speaker volume
Advice to the customer
In order to allow better antenna sensitivity LG suggests that you hold the handset as
depicted in the figure below.
please do not cover the antenna area with your hand during a call and using a
bluetooth connection. It may degrade speech quality.
14
of ringtone in
standby mode
during a call
On-Screen Icons
The table below describes various display
indicators or icons that appear on the
phone’s display screen.
IconoDescripción
IIndicates the strength of the 3G
network signal.
Indicates the strength of the
network signal.
Indicates that the EDGE service is
available. Connection to the EDGE
service allows you to transfer data at
a speed of 200Kb/s(depending on
network availability). Check with your
operator for network coverage and
service availability.
Indicates that GPRS service is
available.
Indicates that Flight mode has been
activated.
Indicates the status of the battery
charge.
Indicates that a call is in progress.
Indicates that the alarm has been
set and is on.
Indicates the Schedule function.
Indicates the receipt of a message.
IconoDescripción
Indicates the receipt of a Voicemail.
Indicates that Ring has been set
for alert.
Indicates that Ring and vibration has
been set for alert.
Indicates that Silent has been set
for alert.
Indicates that Vibration has been
set for alert.
Indicates that the speakerphone has
been activated.
Indicates that the Bluetooth®
function has been activated.
Indicates that the data is being
transmitted using a Bluetooth
connection.
Indicates that the connection to a
headset with Bluetooth has been
activated.
Indicates that the connection to a
hands-free with Bluetooth has been
activated.
Indicates that the connection to a
stereo Bluetooth device has been
activated.
Indicates that the connection to a
hand-free & stereo with Bluetooth
has been activated.
Indicates that the Multitasking
function has been activated.
15
Your Phone
IconoDescripción
Indicates that the connection to a
headset with Bluetooth has been
activated.
Indicates that the connection to a
headset with Bluetooth has been
activated.
Indicates that the phone is accessing
the WAP or data service.
v
The Bluetooth® word mark and logos
are owned by the Bluetooth SIG, Inc.
and any use of such marks by LG
Electronics is under license. Other
trademarks and trade names are those
of their respective owners.
16
Getting Started
Installing the SIM
When you subscribe to a cellular network,
you are provided with a plug-in SIM
loaded with your subscription details,
such as your PIN, any optional services
available and many others.
Important!
The plug-in SIM and its contacts can be
easily damaged by scratches or bending,
so be careful when handling, inserting or
removing the card. Keep all SIM out of the
reach of small children.
1. If necessary, switch off the phone by
holding down the [END] key until
the poweroff image appears.
2. Remove the battery. To do so:
17
Getting Started
3. Slide the SIM into the SIM socket so
that it locks the card into place. Make
sure that the notched corner is at the
top left and the gold contacts of the
card face into the phone.
Note
When you need to remove the SIM, slide it,
as shown, and take it out of the socket.
18
4. To insert the battery, align the golden
contacts of the battery with the
corresponding connectors on the
battery compartment. Press down on
the opposite end of the battery until it
snaps into place.
5. Attach back cover by sliding it up into
position until it clicks.
Charging the Battery
Use of unauthorized accessories could
damage your phone and void your
warranty.
To use the travel charger provided with
your phone:
1. With the battery in position in the
phone, connect the lead from the travel
charger to the bottom of the phone.
Check that the arrow on the lead
connector is facing towards the front of
the phone.
2. Connect the travel charger to a
standard AC wall outlet. Only use the
travel charger that comes with the
package.
19
Getting Started
Warning
The travel charger must be unplugged before
you remove the battery, otherwise, the phone
could be damaged.
3. When charging is finished, disconnect
the travel charger from the phone by
pressing on the grey tabs on both
sides of the connector while pulling the
connector out.
20
Note
v
If your phone is powered on while
charging, you’ll see the bars on the
battery indicator icon cycle. When the
battery is fully charged, the bars on the
battery indicator icon will flash on and off.
If the battery fails to charge
completely:
v
After turning the phone on and off, please
attempt to recharge the battery.
v
After detaching and reattaching the
battery, please attempt to recharge the
battery.
Memory card slot
The TU330 supports the microSD memory
card. The memory card can be inserted
into the side of the TU330 device. You can
use this card to save data files such as
MP3 songs.
Note
Always insert/remove the memory card with
the handset power off.
The gold connectors must be face up and
inserted first into the TransFlash memory
card slot.
Use only memory cards that have been
approved by the manufacturer. Some
memory cards might not be compliant with
the handset.
Inserting the memory card
The TU330 supports the microSD memory
card. The memory card can be inserted
into the side of the TU330 device. You can
use this card to save data files such as
MP3 songs.
Note
The gold connectors must be face down and
inserted first into the memory card slot.
Removing the memory card
1. Push the memory card down into the
slot with the tip of your finger.
2. Carefully pull the memory card out
of slot.
21
Getting Started
Turning Your Phone On and
Off
1. Hold down the [END] key until the
phone switches on.
2. If the phone asks for a PIN, enter the
PIN and press the OK key.
The phone searches for your network and
after finding it goes to the idle screen as
illustrated below. From the idle screen,
you can make or receive a call.
Note
The display language is preset to Automatic
at the factory. To change the language, use
the Language menu option.
3. When you wish to switch the phone off,
hold down the [END] key until the
power-off image displays.
22
Access Codes
You can use the access codes described
in this section to avoid unauthorized use
of your phone. The access codes can be
changed by using the Change Codes
feature.
Security code (4 digits)
The security code protects the
unauthorized use of your phone. The
default security code is set to ‘0000’ and
the security code is required to delete all
phone entries and to activate the Restore
Factory Settings menu. The security code
default setting can be modified from the
Security Settings menu.
Barring Password
The barring password function is required
when you use the Call Barring function.
The password is obtained from the
service provider when you subscribe to
this function.
General Functions
Making a Call
1. Make sure your phone is powered on.
2. Enter a phone number including the
area code. To edit a number on the
display screen, simply press the
key to erase one digit at a time.
v
Press and hold the key to erase
the entire number.
3. Press the [SEND] key to call the
number.
4. When finished, press the [END]
key
Making a Call by Send Key
1. Press the [SEND] key, and the
most recent incoming, outgoing
and missed phone numbers will be
displayed.
2. Select the desired number by using the
navigation key.
3. Press the [SEND] skey.
Making International Calls
1. Press and hold the key and the
international access character ‘+’ will
appear.
2. Enter the country code, area code, and
the phone number.
3. Press the [SEND] key.
Ending a Call
When you have finished a call, press the
[END] key.
Making a Call From the Contacts
You can store names and phone numbers
dialed frequently in the SIM as well as
in the phone memory known as the
Contacts.
You can dial a number by simply selecting
a name in the contacts and pressing the
[SEND] key.
23
General Functions
Making and answering a video
call
You can make a video call in a 3G covered
service area. If the called user has a 3G
video phone in a 3G covered service area,
the call will be established. You can also
answer a video call for video incoming
call. To make/answer a video call, do the
following.
1. Input the phone number using the
keypad, or select the phone number
from the calls made/received lists.
v
To correct mistakes, press the
key briefly to delete the last number,
or press and hold the key to
delete all numbers.
2. If you do not want to use the
speakerphone, ensure you have the
headset plugged in.
3. To start the video function, press.
24
Note
v
The video call may take some time
to connect. Please be patient. The
connection time will also depend on how
quickly the other party answers the call.
While the video call is connecting, you
will see your own images; after the other
party has answered, their image will be
displayed on screen.
4. You can access the following options by
pressing the right soft key [Options].
v
End Call
v
Mute
v
Private mode
v
Hide My Picture
v
Hold
v
Capture
v
View sender number
v
Settings: You can set the
v
camera related options.
- Zoom: x1 / x2
- Night Mode: On / Off
- Quality: Super Fine / Fine
- Switch Cam.: Internal/External
v
Others
Note
v
When in a Video Call:
o reverse the image being transmitted,
simply press the Camera button on the
keypad. Pressing the Camera button
again will reverse the image again.
v
Others
- Contacts: You can save the number
in the Address Book.
- Messaging: You can send a
text message or a multimedia
message.
- Write Note: You can take notes.
5. Press the end key to finish the call, or
close the handset.
Making a voice/video call from
Contacts
It is easy to call anyone whose number
you have stored in your Contacts.
Press the down navigation key to access
the contacts list. Scroll to your chosen
contact. Press the key to make a
voice call, or press the key to make a
video call. Press the key to finish
the call.
Adjusting the Volume
During a call, if you want to adjust the
earpiece volume, use the side keys of
the phone.
In idle mode, you can adjust the ring
volume using the side keys.
Answering a Call
When you receive a call, the phone rings
and the flashing phone icon appears on
the screen. If the caller can be identified,
the caller’s phone number (or name if
stored in your Contact) is displayed.
25
General Functions
1. Open the flip and press the
[SEND] key or the left soft key to
answer an incoming call.
If Any Key has been set as the answer
mode any key press will answer a call
except for the [END] key or the
right soft key.
Note
v
To reject an incoming call, press and hold
the side keys on the left side of the phone.
v
If Flip Open has been set as the Answer
Mode you do not need to press any
key. You can answer the call simply by
opening the flip.
2. End the call by closing the phone or
pressing the [END] key.
Notice
You can answer a call while using the
Contact or other menu features.
Vibrate Mode (Quick)
Vibrate Mode can be activated by pressing
and holding down the [Star] key.
26
Signal Strength
If you are inside a building, being near a
window may give you better reception.
You can see the strength of your signal
by the signal indicator on your phone’s
display screen.
Entering Text
You can enter alphanumeric characters by
using the phone’s keypad. For example,
storing names in the Address Book,
writing a message, or creating scheduling
events in the calendar all require entering
text. The following text input methods are
available on the phone.
T9 Mode
This mode allows you to enter words with
only one keystroke per letter. Each key on
the keypad has more than one letter.
The T9 mode automatically compares
your keystrokes with an internal linguistic
dictionary to determine the correct word,
thus requiring far fewer keystrokes than
the traditional ABC mode.
ABC Mode
This mode allows you to enter letters by
pressing the key labeled with the required
letter once, twice, three or four times until
the letter is displayed.
Changing the Text Input Mode
Change the text input mode by pressing
. You can check the current text
input mode in the upper right corner of
the screen.
123 Mode (Numbers Mode)
Type numbers using one keystroke per
number.
To change to 123 mode in a text entry
field, press key until 123 mode is
displayed.
A long press changes the mode to 123.
Symbol Mode
This mode allows you to enter special
characters.
Notice
You can select a different T9 language from
the menu option. The default setting on the
phone is T9 disabled mode.
Using the T9 Mode
The T9 pre dictive text input mode allows
you to enter words easily with a minimum
number of key presses. As you press each
key, the phone begins to display the
characters that it thinks you are typing
based on a built-in dictionary.
As new letters are added, the word
changes to reflect the most likely
candidate from the dictionary.
1. When you are in the T9 predictive text
input mode, start entering a word by
pressing keys to Press one
key per letter.
v
The word changes as letters are
typed - ignore what’s on the screen
until the word is typed completely.
27
General Functions
v
If the word is still incorrect after
typing completely, press key
here for Word Mode Change.
v
If the desired word is missing from
the word choices list, add it by using
the ABC mode.
2. Enter the whole word before editing or
deleting any keystrokes.
3. Complete each word with a space
by pressing the key or the right
navigation key.
To delete letters, press . Press and
hold down to erase the letters
continuously.
Notice
To exit the text input mode without saving
your input, press the key.
28
Using the ABC Mode
Use the keypad keys to enter your text.
1. Press the key labeled with the required
letter:
v
Once for the first letter
v
Twice for the second letter
v
And so on
2. To insert a space, press the key
once. To delete letters, press the
key. Press and hold down the key
to erase the letters continuously.
Note
Refer to the table below for more information
on the characters available using the keys.
Using the 123 (Numbers) Mode
The 123 Mode enables you to enter
numbers in a text message (a telephone
number, for example) more quickly. Press
the keys corresponding to the required
digits before manually switching back to
the appropriate text entry mode.
Loading...
+ 189 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.