RELEASING THIS DRAWING
WITHOUT PERMISSION LG
Electronics SHOULD BE
ACCUSED ACCORDING TO THE
LAWS AND COMPANY RULES.
이 도면은 LG전자의 자산으로 불법
유출시 관계법과 회사규정에 의해 처벌됨.
61 2
SEC.
WORK
14
가
가
BRAND
LG
<FRONT> <BACK>
나
MODEL
TG2402NTWW
가
다
P/NO.
MFL70280514
PRINTING DEGREE
EXTERIER INTERIER
1 1
MATERIAL AND PRINTING DESCRIPTION
모조지 80g OFFSET 인쇄
<< 주기 >>
1. 재질 : 모조지 80g
2. 인쇄 작업
1) G/S(LG) BRAND(FIG1): * 표지 - 1도 : LG RED PANTONE #207
2) OEM BRAND(FIG2) : * 표지 - 1도 : BLACK
* 내지 - 1도 : BLACK
3. 문자의 크기 및 형상은 주어진 FILM에 준한다.
4. 책자의 크기는 일반적 규격(국판)에 준한다.
5. 양산 전에 설계 한도를 득할것.
6. 유해물질 관리 기준
:본 부품에 금지물질이 포함되지 않도록 하고, 상세내용은 LG(63)-A-5501-34를
만족할 것.
LG MODEL 명
* 내지 -1도 : BLACK
SUFFIX
ABWGGSCF8K5XNK3
LANGUAGE
ENGLISH
PAGE
44
- 2도 : LG GRAY PANTONE #430
REMARK
W-module (W)
1
2
3
4
REV. NO.
기호
P/NO. 다
Stacking holder 문구 추가 및 악세서리부 변경
모델명 추가
REVISION DESCRIPTION
변경 사항
나
1 5 41 5 4
EAGH900384
EAGH900716
REF. NO.
시방 번호
2017/09/14
2017/09/25
DATE
년/월/일
주연수김현석
주연수김현석
김현석주연수2017/11/04EAGHB00083모델명 추가
APPROVED
PREPARED
시방자
승인자
<< NOTES >>
1. Material : Vellum paper
2. Print work
1) G/S(LG) BRAND(FIG1) : * Cover - First color : LG Red Pantone #207
- Second color : LG GRAY PANTONE #430
* Inside - First color : Black
2) OEM BRAND(FIG2) : * Cover - First color : Black
* Inside - First color : Black
3. Printing, text size and line are based on LG designg film.
4. Size will Follow the standard.
5. Before product controlled by criteria sample.
6. Standard of supervision for hazardous material
: The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB,PBDE)
and details should comply with LG standard of LG(63)-A-5501-34.
TRIG.
MODELING
LG 전자 (주)
LG Electronics Inc.
UNITSCALE
REVIEWEDDESIGNED
장현연
mm
CHECKEDAPPROVED
이갑선김현석
17.05.0817.05.0817.05.08
RELATED DWG.
1
1
T
I
MANUAL,OWNER’S
T
L
E
DWG.
No.
W-module(W)1/1
MFL70280514
PDF
ILLUSTRATOR
DR COMPLETED
도면 DR 완료
완료일 : 16.09.19
OWNER'S MANUAL
WASHING
MACHINE
Before beginning installation, read these instructions carefully.
This will simplify installation and ensure that the product is
installed correctly and safely. Leave these instructions near the
product after installation for future reference.
The following safety guidelines are intended to prevent
unforeseen risks or damage from unsafe or incorrect
operation of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’
as described below.
This symbol is displayed to indicate matters and
operations that can cause risk. Read the part with this
symbol carefully and follow the instructions in order to
avoid risk.
WARNING
This indicates that the failure to follow the instructions can
cause serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can
cause the minor injury or damage to the product.
IMPORTANT SAFETY INSTRUCTIONS
EN
WARNING
To reduce the risk of explosion, fire, death, electric shock,
injury or scalding to persons when using this product,
follow basic precautions, including the following:
Children in the Household
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance.
4
Installation
•Never attempt to operate the appliance if it is damaged,
malfunctioning, partially disassembled, or has missing or broken
parts, including a damaged cord or plug.
•This appliance should only be installed and transported by two or
more people holding the appliance securely.
•Do not install the appliance in a damp and dusty place. Do not
install or store the appliance in any outdoor area, or any area that
is subject to weathering conditions such as direct sunlight, wind,
or rain or temperatures below freezing.
•Tighten the drain hose to avoid separation.
EN
5
•If the power cord is damaged or the hole of the socket outlet is
loose, do not use the power cord and contact an authorized
service centre.
•This appliance must not be installed behind a lockable door, a
sliding door or a door with a hinge on the opposite side to that of
the appliance, in such a way that a full opening of the appliance
door is restricted.
•This appliance must be grounded. In the event of malfunction or
breakdown, grounding will reduce the risk of electric shock by
providing a path of least resistance for electric current.
•This appliance is equipped with a power cord having an
equipment-grounding conductor and a grounding power plug. The
power plug must be plugged into an appropriate socket outlet that
is installed and grounded in accordance with all local codes and
ordinances.
•Improper connection of the equipment-grounding conductor can
result in risk of electric shock. Check with a qualified electrician or
service personnel if you are in doubt as to whether the appliance
is properly grounded.
•Do not modify the power plug provided with the appliance. If it
does not fit the outlet, have a proper outlet installed by a qualified
electrician.
EN
6
Operation
•Do not use a sharp object like drill or pin to press or separate an
operation unit.
•Do not repair or replace any part of the appliance. All repairs and
servicing must be performed by qualified service personnel unless
specifically recommended in this Owner’s Manual. Use only
authorized factory parts.
•Use new hose or hose-set supplied with the appliance. Reusing
old hoses can cause a water leak and subsequent property
damage.
•Do not reach into the appliance if the tub or agitator is moving.
•Keep the area underneath and around the appliance free of
combustible materials such as lint, paper, rags, chemicals, etc.
•Do not put animals, such as pets into the appliance.
•Do not leave the appliance door open. Children may hang on the
door or crawl inside the appliance, causing damage or injury.
•Never reach into the appliance while it is operating. Wait until the
drum has completely stopped.
•Do not put in, wash or dry articles that have been cleaned in,
washed in, soaked in, or spotted with combustible or explosive
substances (such as wax, oil, paint, gasoline, degreasers,
drycleaning solvents, kerosene, vegetable oil, cooking oil, etc.).
Improper use can cause fire or explosion.
•In case of flood, disconnect the power plug and contact the LG
Electronics customer information centre.
•Do not push down the drawer excessively, when the appliance
drawer is open.
EN
7
•Do not touch the door during a high temperature programme.
•Do not use flammable gas and combustible substances (benzene,
gasoline, thinner, petroleum, alcohol, etc.) near the appliance.
•If the drain hose or inlet hose is frozen during winter, use it only
after thawing.
•Keep all washing detergents, softener and bleach away from
children.
•Do not touch the power plug or the appliance controls with wet
hands.
•When pulling out the power plug from an outlet, hold the power
plug, not the cable.
•Do not bend the power cable excessively or place a heavy object
on it.
•If there is a gas leakage (isobutane, propane, natural gas, etc.),
do not touch the appliance or power plug and ventilate the area
immediately.
•Do not operate Mini Washer with two or more Mini Washers
stacked.
•To avoid breaking the door glass, do not push too hard on the
door when closing.
•Do not step on Mini Washer.
•Do not wash rugs, mats, shoes or pet blankets, or any other items
other than clothes or sheets, in this machine.
•This appliance must only be used for domestic household
purposes and should not be used in mobile applications.
•Do not open or close the door by foot.
EN
8
Maintenance
•Securely plug the power plug in the socket outlet after completely
removing any moisture and dust.
•Disconnect the power cord before cleaning the appliance.
•Never unplug the appliance by pulling on the power cable. Always
grip the power plug firmly and pull straight out from the socket
outlet.
•Do not spray water inside or outside the appliance to clean it.
Disposal
•Before discarding an old appliance, unplug it. Cut off the cable
directly behind the appliance to prevent misuse.
•Dispose of all packaging materials (such as plastic bags and
styrofoam) away from children. The packaging materials can
cause suffocation.
•Remove the door before disposing of or discarding this appliance
to avoid the danger of children or small animals getting trapped
inside.
EN
9
INSTALLATION
3
7
Parts
EN
5
6
1
2
3
Door
1
Drum
2
Control Panel
Drawer
4
4
8
Water Supply Hose
5
Power Plug
6
7
Water Drain Hose
Leveling Feet
8
10
Accessories
EN
Water supply hose
(for cold water)
Anti-slip sheets
(2 EA)
* Screws
Type A (37 EA)
Type B (5 EA)
Type C (11 EA)
* Type A : long sheet metal screw, Type B : short sheet metal screw, Type C : machine screw
Connecting
supply hose
Detergent
measuring
cup
Cable ties
(2 EA)
Water drain hose Water supply hose
Brackets (front)
(2 EA)
Band clamp
(1 EA)
connector
Brackets (back)
(2 EA)
Remote control
(optional)
Water drain hose
connector
Spanner
NOTE
• Different accessories may apply to each model.
• Depending on the installation environment, you may have to purchase a separate drain hose
connector.
• In addition to the screws required for installation, extra screws have been provided.
• Appearance and specifications may change without notice to improve the quality of the product.
11
EN
Installation Place
Requirements
Location
135 cm
123 cm
2 cm
114 cm
*125 cm
10 cm
60 cm
*125 cm: minimum space for installation
Level floor : Allowable slope under the entire
appliance is 1°.
Power outlet : Must be within 1.5 meters of
either side of the location of the appliance.
• Do not overload the outlet with more than one
appliance.
Additional Clearance : 5 cm at the sides and
10 cm behind the unit.
• Do not place or store laundry products on top
of the appliance at any time. These products
may damage the finish or controls.
WARNING
• The plug must be plugged into an appropriate
outlet that is properly installed and grounded
in accordance with all local codes and
ordinances.
Positioning
• Install the appliance on a flat hard floor.
• Make sure that air circulation around the
appliance is not impeded by carpets, rugs,
etc.
• Never try to correct any unevenness in the
floor with pieces of wood, cardboard or similar
materials under the appliance.
• If it is impossible to avoid positioning the
appliance next to a gas cooker or coal burning
stove, an insulation (85x60 cm) covered with
aluminum foil on the side facing the cooker or
stove must be inserted between the two
appliances.
0.5 cm
125 cm
5 cm5 cm
• Do not install the appliance in rooms where
freezing temperatures may occur. Frozen
hoses may burst under pressure. The
reliability of the electronic control unit may be
impaired at temperatures below freezing point.
• Ensure that when the appliance is installed, it
is easily accessible for an engineer in the
event of a breakdown.
• With the appliance installed, adjust all four
feet using a transit bolt spanner to ensure the
appliance is stable, and a clearance of
approximately 5 mm is left between the top of
the appliance and the underside of any
work-top.
• If the appliance is delivered in winter and
temperatures are below freezing, place the
appliance at room temperature for a few hours
before putting it into operation.
• Do not use a drip pan as it can block the
drawer. Using the drip pan may result in
increased vibration and noise during
operation.
WARNING
• This appliance is not designed for maritime
use or for use in mobile installations such as
caravans, aircraft etc.
Electrical Connection
• Do not use an extension cord or double
adapter.
• Always unplug the appliance and turn off the
water supply after use.
• Connect the appliance to an earthed socket in
accordance with current wiring regulations.
• The appliance must be positioned so that the
plug is easily accessible.
• Repairs to the appliance must only be carried
out by qualified personnel. Repairs carried out
by inexperienced persons may cause injury or
serious malfunctioning. Contact your local
service centre.
12
EN
2
Stacking Mini Washer
Brackets (front)
Brackets (back)
Brackets (front)Brackets (back)
• The
display, if the stacking holder is not attached
to the bottom of the Main Washer.
1
2
error message appears on the
Tilt and hold Main Washer.
Assemble the bracket (front) and stacking
holder at the bottom of Main Washer.
Type 1. The bottom part of the Main
Washer is silver in color.
• First assemble the stacking holder using 2
type A screws included in the accessory box
of the Mini Washer, then each bracket using
7 type A screws included in the accessory
box of the Mini Washer.
2
1
3
Type 2. The bottom part of the Main
Washer is white in color.
• First assemble the stacking holder using 2
type C screws included in the accessory box
of the Main Washer, then each bracket
using 4 type C screws included in the
accessory box of the Mini Washer.
NOTE
• The stacking holder and screws needed for
assembly are enclosed in the Main
Washer, which can be stacked with the
Mini Washer.
• If the Main Washer already has a stacking
holder, do not install the stacking holder
provided with the Mini Washer.
1
13
Loading...
+ 31 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.