LG T7007TEFT0 Owner’s Manual

Washing Machine

OWNER'S MANUAL

MODEL : T8007TEFT0 / T7007TEFT0

Please read this manual carefully before operating your set. Retain it for future reference. Record model name and serial number of the set. Quote this information to your dealer when you require service.

P/No.: MFL62350504

roduct Features

Washer doesn't operate while the lid is open. If the lid is open during the wash, rinse or spin cycles, the operation stops for safety.

EXTRA CLEANING

The purpose of this cycle is to optimize detergent residues during the washing and rising cycles.

FUZZY logic control

A built-in load sensor automatically detects the laundry load and a microprocessor optimizes washing conditions such as ideal WATER LEVEL and washing time.

START

Advanced technology is built into the Electronic Control System which ensures the best washing result.

Rinse can be added until max 3 times.

SENSING

Laundry Sensor

Water Level Sensor

SETTING

Optimum Washing Condition

WASHING

AUTO

POWER

OFF

Turbo drum washing

When "Punch + 3" washing wings turn, the washing tub turns in the opposite direction. This makes the both sides current of water which improve washperformance by rubbing clothes strongly.

(option)

3 Step washing

3 step washing makes the best washing performance with low tangling.

Rubbing

NOTE :

Rubbing and

Shaking

Be sure to remove the unit from the carton base, otherwise the machine will not be able to operate properly.

Shaking and

Disentangling

ontents

READ THIS MANUAL

Inside you will find many helpful hints on how to use and maintain your washer properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your washer. You will find many answers to common problems in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.

Introduction

Before Starting to Wash

Washing Programs

Additional Function Program

Installation

Care and Maintenance

Troubleshooting

Terms of Warranty Specification

4noitamrofnIytefaS 7straPfonoitacifitnedI

8noitamrofnInoitcnuF Preparation Before Washing 9 Use of Water, Detergent, Bleach and Softener 10 Special Guide for Stain Removal 13 Function of each Button 14 FUZZY Wash (Normal Wash) 16

61hsaWLOOW

61HSAWKCIUQ

61hsaWSNAEJ

61GNINAELCEXTRA

81hsaWKAOS

91hsaWETIROVAF

02hsaWTNELIS

12NAELCBUT

22YRDRIA

32gnihsaWnoitpO DELAY START (RESERVATION) Wash 24 Other Useful Functions 25 Placing and Leveling 26 Connecting Water Supply Hose 27 Connecting Drain Hose 30

13dohteMgnidnuorG Cleaning and Maintenance 32

Use of Handle Locker 34 Common washing problems 35

63gnitoohselbuorT

73ytnarraWfosmreT

83noitacificepS

afety Information

Read carefully and thoroughly through this booklet as it contains important safety information that will protect the user from unexpected dangers and prevent potential damages to the product.

This booklet is divided into 2 parts : Warning and Caution.

Introduction

: This is a warning sign specifying user’s applications which might

be dangerous.

: This is a sign specifying ‘Strictly Forbidden’ applications.

Warning

Caution

WATER HEATER SAFETY

PROPER INSTALLATION

: Failure to comply with the instructions under this

sign may result in major physical injuries or death.

: Failure to comply with the instructions under this

sign may result in minor physical injuries or damages to the product.

Warning

• Under certain conditions hydrogen gas may be produced in a water heater that has not been used for two weeks or more. Hydrogen gas can be explosive under these circumstances. If the HOT water has not been used for two weeks or more, prevent the possibility of damage or injury by turning on all Hot water faucets and allowing them to run for several minutes. Do this before using any electrical appliance which is connected to the HOT water system. This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance during this process.

Caution

• The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

• Install or store where it will not be exposed to temperatures below freezing or exposed to the weather.

If the product is exposed to such conditions, electric shock, fire, break down or deformation may occur.

• Properly ground washer to conform with all governing codes and ordinances. Follow details in Installation Instructions.

If not grounded properly, break down and leakage of electricity may occur, which may cause electric shock.

• Must be positioned so that the plug is accessible.

If the plug is placed between the wall and the machine, it may get damaged, possibly causing fire or electric shock.

• Make sure the plug is completely pushed into the outlet.

Failure to do so may cause electric shock and fire due to overheating.

afety Information

Introduction

YOUR LAUNDRY AREA

WHEN USING THE WASHER

Warning

• Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemical, etc.

Operating with such materials around the machine may trigger explosion or fire.

• Close supervision is necessary if this appliance is used by or near children. Do not allow children to play on, with, or inside this or any other appliance.

There is potential danger that children might drown in the tub.

Do not touch the power plug with a wet hand.

It will cause electric shock

Do not put your hand, foot or anything under the washing machine while the washing machine is in operation.

There is a rotating mechanism under the machine, so you could be injured.

Caution

• Use this appliance only for its intended purpose as described in this Owner’s Manual.

• The laundry process can reduce the flame retardancy of fabrics. To avoid such a result, carefully follow the garment manufacturer’s wash and care instructions.

• To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the cirduit breaker before attempting any maintenance or cleaning.

NOTE : Pressing Power button to turn off does NOT

disconnect the appliance from the power supply.

• Make sure that drainage is working properly.

If water is not drained properly, your floor may get flooded. Flooded floors may induce electricity leakage, further resulting in electric shock or fire.

• If, during spinning, opening the lid does not stop the tub within about 15 seconds, immediately discontinue operating the machine.

Call for repair. A machine that spins with its door open may cause injuries.

Never reach into washer while it is moving. Wait until the machine has completely stopped before opening the lid.

Even slow rotation can cause injury.

Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

Operating with a damaged plug may cause electric shock.

Do not use water hotter than 50°C.

Use of excessively hot water may cause damage to fabrics or cause leakage of water.

afety Information

Introduction

WHEN USING THE WASHER

WHEN NOT IN USE

Warning

Do not use a plug socket and wiring equipment for more than their rated capacity.

Exceeding the limit may lead to electric shock, fire , break down, and/or deformation of parts.

Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover.

Mixing different chemicals can produce toxic gases which may cause death.

Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as wax, oil, paint, gasoline, drycleaning solvents, kerosene, etc). Do not add these substances to the wash water. Do not use or place these substances around your washer or dryer during operation.

It may ignite or explode.

Caution

• Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage if a break or rupture should occur. Check the condition of the fill hoses; they may need replacement after 5years.

• When the air temperature is high and the water temperature is low, condensation may occur and thus wet the floor.

• Wipe off dirt or dust on the contacts of the power plug.

Using unclean power plug may cause fire.

• Before discarding a washer, or removing it from service, remove the washer lid to prevent children from hiding inside.

Children may be trapped and suffocated if the lid is left intact.

Do not attempt to repair or replace any part of this appliance unless specifically recommended in this Owner’s Manual, or in published user-repair instructions that you understand and have the skills to carry out.

Operating the machine with improperly replaced parts may be a cause for fire or electric shock.

Do not tamper with controls.

It may lead to electric shock, fire , break down, deformation.

Do not yank the power cord in an attempt to disconnect the power plug. Securely hold the power plug to unplug the machine.

Failure to observe these instructions may cause electric shock or fire due to short-circuit .

When you are cleaning the washing machine, do not apply water directly to any part of the washing machine.

It will cause short circuit and electric shock.

dentification of Parts

Body

Introduction

POWDER AND LIQUID DETERGENT BOX

LINT FILTER

Clean regularly to stop linting on the clothes load.

SOFTENER INLET

BLEACH DISPENSER

FUNCTION SELECTOR

TUB

START/PAUSE BUTTON

Use to start or stop the washing machine temporarily.

ADJUSTABLE LEGS

Use to level the washing machine for correct balance & spin operation.

Accessories

WATER SUPPLY HOSE

Make sure the water does not leak.

POWER PLUG

If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard.

DRAIN HOSE for pump model

Check if the drain hose is hung up before operating the washing machine.

DRAIN HOSE

for non pump model

BASE

Water supply hoses

Drain hose Anti-rat cover (option)

1 Each for COLD and

HOT water

NOTE

“ ” Part can be different according to the model.

unction Information

Our machine provides various washing methods which suits various conditions and types of laundry.

Different types of laundry washing

FUZZY(Normal) Wash

Use this Program for everyday washing e.g. sheets, towels, T-shirts.

Introduction

Washing according to the condition of laundry

JEANS Wash

Use this Program for heavily soiled durable garments e.g. overalls, jeans. Thick and heavy clothes or those which are excessively dirty like jeans or working uniforms can be washed. (refer to page 16)

EXTRA CLEANING

Use this program to get better rising performance.

WOOL Wash

Wool clothes (lingerie, wool, etc.) which may be easily damaged can be washed. (refer to page 16)

The fibers of machine washable woolens have been specifically modified to prevent felting when they are machine washed. Most handknitted garments are not made of machine washable wool and we recommend that you hand wash them

• Before washing your woolens check the care label for the washing instructions.

• When washing woolens use a mild Detergent recommended for washing wool.

• Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.

• To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight.

(The heat and tumble action of a dryer may cause shrinkage or felting of woolen garments.) Some wool underlays and sheepskin products can be washed in a washing machine but may cause pump blockages. (Ensure that the whole article is suitable for machine washing and not just the backing material.) You may wish to handwash these articles and place them in the machine to spin dry.

FAVORITE Wash

This setting allows you to store your FAVORITE wash conditions in the normal cycle memory. (refer to page 19)

SILENT Wash

Use this program to wash quietly at night. (refer to page 20)

(refer to page 16)

QUICK WASH

QUICK WASH can be selected to wash lightly soiled clothes of less than 2.0 kg in a short time. (refer to page 16)

SOAK Wash

SOAK Wash can be selected to wash heavily soiled laundry by soaking in water for some time to remove dirt and grime. (refer to page 18)

Other washing method

TUB CLEAN

Use this program to clean the inside of washing machine especially Inner tub & Outer tub . (refer to page 21)

DELAY START Wash

DELAY START Wash is used to delay the finishing time of the operation. The number of hours to be delayed can be set by the user accordingly. (refer to page 24)

OPTION WASH

When the user needs only SPIN, RINSE/SPIN, RINSE, WASH/RINSE, WASH, WASH/RINSE/SPIN, SOAK/WASH/RINSE/SPIN. (refer to page 23)

reparation Before Washing

WIRE

Care Labels

* Look for a care label on your clothes. This will tell you about the fabric content of your garment

and how it should be washed. Sort clothes into loads that can be washed with the same wash cycle, Water Temperature and spin speed.

Sorting

To get the best results, different fabrics need to be washed in different ways.

• SOIL (Heavy, Normal, Light)

• COLOR (Whites, Lights, Darks) Separate white fabrics from colored fabrics.

• LINT (Lint producers, Collectors) Separate lint producers and lint collectors.

Lint Producers Terry cloth, Chenille, Towels, Nappies, Diapers Lint Collectors Synthetics, Corduroy, Permanent Press, Socks

Check before Loading

• Check all pockets to make sure that they are empty. Things such as nails, hairclips, matches,

pens, coins, and keys can damage both your washer and your clothes.

• Mend any torn garments or loose buttons. Tears or holes may become larger during washing.

• Remove belts, underwires, etc. to prevent damage to the machine or your clothes.

• Pretreat any dirt and stains.

• Make sure the clothes are washable in water.

• Check the washing instructions.

• Remove tissue in pockets.

Pretreatment on stains or heavy soil

• Pretreat shirt collars and cuffs with a pre-wash product or liquid Detergent when placing them in the washer.

Before washing treat special stains with bar soaps, liquid Detergent or a paste of water and granular Detergent.

• Use a pretreat soil and stain remover.

Treat stains AS SOON AS POSSIBLE. The longer they are left the harder they are to remove.

(For more detail refer to page13)

Do not wash fabrics containing flammable materials (waxes, cleaning fluids, etc.).

Load Size

The WATER LEVEL should just cover the clothes. Adjust the load size accordingly. Loosely load clothes no higher than the top row of holes in the washer tub. To add items after washer has started, press Start button and submerge additional items. Close the lid and press Start button again to restart.

Light and Large-sized clothing

Clothes like downs and woollens are light weight, large and float easily. Use a nylon net and wash them in a small amount of water. If the laundry floats during the wash cycle, it may become damaged. Use dissolved Detergent to prevent the Detergent from clumping.

Long laundry items

Use nylon nets for long, DELICATE items. For laundry with long strings or long length , a net will prevent tangling during washing.

Nylon net is not supplied by LG.

Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.

Separate clothes according to the type and amount of soil.

WARNING

Never place items in the washer that are dampened with gasoline or other flammable fluids. No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Doing so can result in death, explosion, or fire.

Fire Hazard

Before Starting to Wash

pecial Guide for Stain Removal

WARNING

■

Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.

■

To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:

• Read and comply with all instructions on stain removal products.

• Keep stain removal products in their original labeled containers and out of children’s reach.

• Thoroughly wash any utensil used.

• Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.

• Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents

or other flammable or explosive substances because they give off vapors that could ignite or explode.

• Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.

For successful stain removal:

• Remove stains promptly.

• Determine the kind of stain, then follow the recommended treatment in the stain

removal chart below.

• To pretreat stains, use a prewash product, liquid Detergent, or a paste made from

granular Detergent and water.

• Use COLD water on unknown stains because HOT water can set stains.

• Check care label instructions for treatments to avoid on specific fabrics.

• Check for colorfastness by testing stain remover on an inside seam.

• Rinse and wash items after stain removal.

Stain Removal

STAIN

Adhesive tape, chewing gum, rubber cement

Baby formula, dairy products, egg Beverages (coffee, tea, soda, juice,

alcoholic beverages) Blood

Candle wax, crayon

Chocolate Collar or cuff soil, cosmetics Dye transfer on white fabric Grass

Grease, oil, tar (butter, fats, salad dressing, cooking oils, car grease, motor oils)

Ink

Mildew, scorch

Mud

Mustard, tomato

Nail polish

Paint, varnish

Rust, brown or yellow discoloration

Shoe polish

Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain remover or nonflammable dry cleaning fluid.

Use product containing enzymes to pretreat or soak stains. Pretreat stain. Wash using COLD water and bleach safe for fabric.

Rinse with COLD water. Rub with bar soap. Or pretreat or soak with product containing enzymes. Wash using bleach safe for fabric.

Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed. Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaning fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.

Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric. Pretreat with prewash stain remover or rub with bar soap. Use packaged color remover. Wash using bleach safe for fabric. Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric. Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply

nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly. Wash using hottest water safe for fabric.

Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denatured alcohol or nonflammable dry cleaning fluid.

Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and HOT water before washing. Badly mildewed fabrics may be permanently damaged.

Brush off dry mud. Pretreat or soak with product containing enzymes. Pretreat with prewash stain remover. Wash using bleach safe for fabric. May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.

Repeat, replacing paper towels frequently. Do not use on acetate fabrics. WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,

OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing. For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate Detergent and

nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration. LIQUID : Pretreat with a paste of granular Detergent and water. PASTE : Scrape residue from fabric. Pretreat with

prewash stain remover or nonflammable dry cleaning fluid. Rub Detergent into dampened area, Wash using bleach safe for fabric.

TREATMENT

Follow fabric care label

instructions

Before Starting to Wash

ashing Programs

Washing

Programs

Washing Programs

(Normal Wash)

Used for normal loads, this

POWER

AUTO OFF

mode automatically selects the most appropriate conditions and completes the sequence in one operation. The built-in sensor detects the size of the load and the ideal wash power and wash, rinse and spin times are set accordingly.

Use this program for washing delicate fabrics such as lingerie and woolens. (wash only “water washable” clothes) Before washing your woolens check the care label for the washing instructions. (wash only water washable clothes)

Use this mode when washing lightly soiled clothes for a short time. The highly recommended laundry amount is under 2.0kg.

Add

the

laundry

• Select the

WOOL

program on the Control panel.

•

Select the

QUICK WASH

program on the Control panel.

Add

the Detergent

•

Add the appropriate quantity of Detergent as indicated by the WATER LEVEL next to

WATER DETERGENT.

Or follow the Detergent manufacturer’s instructions

• Use neutral Detergent appropriate for th laundry.

• When washing woolens use a mi Detergent recommend- ed f washing wool.

•

Add the appropriate quantity of Detergent indicated by the WATER LEVEL next to

WATER DETERGENT.

Or follow the Deterge manufacturer’s instructions

Use Jean program when washing Jeans of different sizes

Use this program to increase rising performance. This would include underwear and baby clothes. If someone has sensitive skin or skin trouble,use this program.

• Spread the jean evenly in the tub

•

Select the

JEANS

program on the Control panel.

• Select the

EXTRA CLEANING

program on the Control panel.

Close the lid Finish Caution & Note

STSTARART PAUSEUSE

POWER

Washing Programs

• The pulsator rotates for 8 seconds to detect the laundry load.

• Then the WATER LEVEL and the amount of Detergent to be used will be shown and water will be supplied.

• Water will be supplied for 2 minutes after the start of the wash to supplement the water the laundry has absorbed.

• When the wash program ends, the buzzer will ring for 10 seconds before the Power goes off automatically.

• If water is already in the tub, or putting wet laundry into the tub before starting will increase the WATER LEVEL.

• With lightweight bulky loads, WATER LEVEL can be set low.

• Changes to Water Temperature (HOT/COLD) and wash level are possible during operation.

(refer to page 14)

• When setting the WATER LEVEL manually, do not set to Medium to prevent damage to laundry.

• Washing with HOT water may damage the laundry (Water is set to cold automatically). Ensure that the load is under 2kg.

• In order to avoid damage to laundry, the spin cycle may appear slow. This also avoids wrinkles and clothing may still contain some water. This is normal.

• When static pressure of water is more than 2kg/cm will be within 19min.

, the QUICK WASH course

minmin min minminmin min min min min min min min

Lamp

Off

START PAUSE

OAK Wash

Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty. SOAK mode can be used with FUZZY or JEAN or SILENT or FAVORITE program.

Press the POWER (AUTO OFF) button to turn power on.

Washing Programs

Press the PROGRAM button to select the washing program.

Press the WASH button, to select SOAK program.

Add the Detergent.

Add the laundry and press the START/PAUSE button.

Close the lid.

WER

AUTO OFF

• SOAK will not work in WOOL and QUICK WASH, TUB CLEAN Program.

• Keep pressing the WASH button until the light turns on ‘SOAK’ and ‘WASH’ simultaneously as next image.

• SOAK program only works when socking time is 40, 50 or

60 minutes.

• The appropriate quantity of Detergent marked next to the WATER LEVEL of WATER-DETERGENT.

• The WATER LEVEL will be shown and water will be supplied.

• Water will be supplied for 2 minutes after the start of the wash to supplement the absorbed water by the laundry.

Finish

NOTE

• Order of Soak-Wash timing

• Select soaking time 40minutes, 50minutes, or 60minutes (including washing time) by pressing the Wash button repeatedly.

• If necessary, select the times of Rinse and the time for Spinning by pressing the Rinse or Spin buttons till you reach the desired times.

• When the wash program ends, the buzzer will ring for 10seconds before the Power goes off automatically.

Soak-Wash

AVORITE Wash

POWERWER

AUTO OFF

STSTARART PAUSEUSE

POWER

Pressing the FAVORITE button allows you to store your FAVORITE wash conditions in the normal cycle memory and then recall it for use at a later time.

Press the POWER (AUTO OFF) button to turn power on.

Select the FAVORITE program.

Select your FAVORITE wash conditions.

• Press the TEMP. button to select wash Water

Temperature.

• Press the WATER button to select

WATER.

• Press the WASH button, the RINSE button & the SPIN

button to select wash time, rinse time & spin time respectively you want to store.

Washing Programs

Press the START/PAUSE button to store & start your FAVORITE wash cycle. Power turns off automatically after wash.

NOTE

To recall your FAVORITE cycle.

1. Press POWER on.

2. Select the FAVORITE cycle by pressing the PROGRAM.

3. Press the START/PAUSE button. Then the wash cycle starts.

POWERWER

AUTO OFF

POWER

STSTARART PAUSEUSE

POWER

ILENT Wash

Press the POWER (AUTO OFF) button to turn power on.

Washing Programs

Press the PROGRAM button to select SILENT program.

Add the laundry into the washing tub.

Press the START/PAUSE button.

Use this program to wash quietly in SILENT especially during late night and dawn.

Add the Detergent and close the lid.

NOTE

• SILENT program takes longer washing time than FUZZY(Normal) program.

• To reduce noise in spinning, spin rpm is lower than normal spinning rpm. So the laundry has

more moisture than normal.

STSTARART PAUSEUSE

POWER

POWERWER

AUTO OFF

POWER

UB CLEAN

If scrud is allowed to build-up in the machine it can result in stains on your clothes or unpleasant smell in your washer. Scrud is the way build-up that can occur within any washer when the fabric softener comes into contact with Detergent, and according to particular degree of dirtiness or quality of water to be use, in these case, use this program to clean inner tub and outer tub.

Press the POWER (AUTO OFF) button to turn power on.

Press the PROGRAM button to select the TUB CLEAN program.

Ex-Large WATER is set automatically.

Press the START/PAUSE button.

After 10 minutes of water supplement. Add the oxygenated bleach (about 300m ).

• Do not use Detergent box.

• Do not place any laundry inside tub.

• Left time is displayed.

Additional Function Program

Close the lid.

NOTE

• Before using this program remove lint inside lint filter.

• When using this program, do not place any laundry inside tub.

• This program takes about 3 hours to be completed.

• After using this program, remove dirt inside filter.

• After finishing this program, open the lid of wash to remove irritant odor.

• Do not pour bleach into the tub directly. It might cause damage the tub.

• Do not leave diluted oxygenated bleach inside tub for long time.

It rusts the tub must drain the remained diluted oxygenated water out.

• Use this program once for every month.

• Do not use this program repeatedly.

• When the lid is open the machine will not operate, and an

alarm signal will remind you to close the lid.

WER

STSTARART PAUSE

USE

POWER

IR DRY

AIR DRY for your laundary.

Press the POWER (AUTO OFF) button to turn power on.

WER

AUTO OFF

Additional Function Program

Press the AIR DRY button to select the desired timing.

Press the START/PAUSE button.

Closed the lid.

NOTE

■ Select "Air Dry" 30min ➔ TUB DRY

-Use this mode to keep inner tub from getting moldy caused by remaining moisture.

- Do not place any laundry inside tub.

- Use this mode once a week. Caution) For better performance, put drain hose down to the floor so that water inside will be completely drained out.

■ Select “Air Dry” above 1 hour

- Use this mode to reduce the drying time by minimizing remaining moisture on the laundry.

- In general, this is very effective on synthetic items(100% polyester).

- Do place laundry which is evenly distributed(Under 2kg).

- For normal clothes : Select 1 hour

- For synthetic items(100% polyester): Select 2 hours or 3 hours(on some models)

STSTARART PAUSEUSE

POWER

POWERWER

AUTO OFF

ption Washing

When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually.

Press the POWER (AUTO OFF) button to turn power on.

Only Wash

Press the select the desired timing.

Press the select the desired times of rinse.

WASH

Only Wash,Rinse

WA S H

RINSE

button to

Only Rinse

Press the select the desired times of rinse.

Press the select the desired times of spin.

RINSE

button to

Only Rinse,Spin

RINSE

button to

SPIN

button to

Only Spin

Press the select the desired times of spin.

When you want to only drain, wait until the water in the washing tub drains completely.

SPIN

button to

Only Drain

Additional Function Program

You can use this option for preventing wrinkles of laundry

Press the WATER button, to control the water level according to the amount

of laundry. If you do not choose anything, it is set the middle water level automatically.

Add the laundry into the washing tub.

Press the START/PAUSE button.

Add the detergent and close the lid.

NOTE

• When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not be drained off. If you wish to drain the water, press SPIN button and wait until the water in the tub has drained completely. Then press the START/PAUSE button.

• If you do not specify the water level, then Medium will be automatically selected.

• If only Rinse is selected, the process will start from Water Supply.

+ 54 hidden pages