LG T7001TDDLC Owner’s Manual
WASHING
MACHINE
T70CSA13P
T7001TDDLC
P/NO : MFL68465602
Rev. No.: 00
ontents
C
Read this manual
Inside you will find many helpful hints on how to use and maintain your washer properly. Just a little
preventive care on your part can save you a great deal of time and money over the life of your washer.
You will find many answers to common problems in the Troubleshooting section. If you review our
chart of Troubleshooting Tips first, you may not need to call for service at all.
Page No.
Introduction
Installation
Before Starting to Wash
Washing Programs
Additional Features
Product Features
Safety Information
Identification of Parts
Placing, Leveling and Installation
Connecting Water Supply Hose
Connecting Drain Hose
Preparation Before Washing
Use of Water, Detergent, Bleach and Softener
Special guide for Stain removal
Function of each Button
Turbo Wash
Other Option
Function Options
10
11
12
15
16
18
18
20
3
4
7
8
9
Care and Maintenance
Troubleshooting
Specification
Cleaning and Maintenance
Grounding Method
Common washing problems
Troubleshooting
Specification
2
21
23
24
25
26
roduct Features
P
Washer doesn't operate while the lid is open. If the lid is open during the wash,
rinse or spin cycles, the operation stops for safety.
Fuzzy Logic Control
A built-in load sensor automatically detects and measures the laundry load and
a microprocessor optimizes washing conditions such as ideal water level,
washing time and optimum detergent quantity indication.
Advanced technology is built into the Electronic Control System which ensures
the best washing result.
START
SENSING
SETTING
Laundry Sensor
Water Level
Sensor
Optimum
Washing
Condition
WASHING
AUTO
POWER
OFF
TurboDrum washing
When "Punch + 3" washing wings turn, the washing tub turns in the
opposite direction. This makes the both sides current of water which
improve washing-performance by rubbing clothes strongly.
3 Step washing
3 step washing makes best washing performance with low tangling.
Rubbing
Rubbing and
Shaking
Shaking and
Disentangling
Auto Restart
In the event of a power failure, the washing machine will automatically start its
cycle from the point of interruption when power is resumed.
Magic / Lint Filter *
Lint and loose threads from laundry generated during the
washing cycle are caught by the magic / Lint filter for a
cleaner wash.
Be sure to remove the machine from all packing base,
Note :
otherwise the machine will not be able to operate properly.
* Parts can be different according to the model.
3
afety Information
S
Read carefully and thoroughly go through this booklet as it contains important safety information
that will protect the user from unexpected dangers and prevent potential damages to the product.
This booklet is divided into 2 parts : Warning and Caution.
: This is a warning sign specifying user’s applications which might
be dangerous.
: This is a sign specifying ‘Strictly Forbidden’ applications.
WARNING
CAUTION
WATER
HEATER
SAFETY
PROPER
INSTALLATION
: Failure to comply with the instructions under this
sign may result in major physical injuries or death.
: Failure to comply with the instructions under this
sign may result in minor physical injuries or
damages to the product.
WARNING
Under certain conditions hydrogen gas may be produced in a water heater that has not been
used for two weeks or more. Hydrogen gas can be explosive under these circumstances.
If the HOT water has not been used for two weeks or more, prevent the possibility of
damage or injury by turning on all Hot water faucets and allowing them to run for several
minutes. Do this before using any electrical appliance which is connected to the HOT
water system. This simple procedure will allow any built-up hydrogen gas to escape. Since
the gas is flammable, do not smoke or use an open flame or appliance during this process.
CAUTION
•
The base opening must not be obstructed by carpeting when the washing machine is installed
on a carpeted floor.
•
Install or store where it will not be exposed to temperatures below freezing or exposed to the
weather (Rain / Water Splash).
If the product is exposed to such conditions, electric stock, fire, break down or deformation may occur.
•
Properly ground washer to conform with all governing codes and ordinances. Follow details in
Installation Instructions.
If not grounded properly, break down and leakage of electricity may occur, which may cause electric
shock.
•
Machine must be positioned so that the plug is accessible.
If the plug is placed between the wall and the machine, it may get damaged, possibly causing fire or
electric shock.
• Make sure the plug is completely pushed into the outlet.
Failure to do so may cause electric shock and fire due to overheating.
• Do not connect ground to a gas pipe.
It can cause explosion.
•
Do not connect ground to telephone wires or lightning rods.
This may be dangerous during electrical storms.
• Washer shall be placed in dry areas specifically during rainy season.
Humid conditions may cause rusting which may result in product failure.
4
afety Information
S
YOUR
LAUNDRY
AREA
WHEN USING
THE WASHER
WARNING
• Keep the area underneath and around your appliances free of combustible
materials such as lint, paper, rags, chemical etc.
Operating with such materials around the machine may trigger explosion or
fire.
• Close supervision is necessary if this appliance is used by or near children.
Do not allow children to play on, with or inside this or any other appliance.
There is potential danger that children might drown in the tub.
Do not touch the power plug with a wet hand.
It will cause electric shock
Do not put your hand, foot or anything under the washing machine
while the washing machine is in operation.
There is a rotating mechanism under the machine, so you could be injured.
CAUTION
• Use this appliance only for its intended purpose as described in this Owner’s Manual.
• The laundry process can reduce the flame retardancy of fabrics. To avoid such a result,
carefully follow the garment manufacturer’s wash and care instructions.
• To minimize the possibility of electric shock, unplug this appliance from the power
supply or disconnect the washer at the household distribution panel by removing the
fuse or switching off the circuit breaker before attempting any maintenance or cleaning.
NOTE : Pressing Power button to turn off does NOT
disconnect the appliance from the power supply.
• Make sure that drainage is working properly.
If water is not drained properly, your floor may get flooded.
Flooded floors may induce electricity leakage, further resulting in electric shock or fire.
• If, during spinning, opening the lid does not stop the tub within about 15 seconds,
immediately discontinue operating the machine.
Call for repair. A machine that spins with its door open may cause injuries.
Never reach into the machine while it is running.
Wait until the machine has completely stopped before opening the lid.
Even slow rotation can cause injury.
Never attempt to operate this appliance if it is damaged, malfunctioning, partially
disassembled, or has missing or broken parts, including a damaged cord or plug.
Operating with a damaged plug may cause electric shock.
Do not use water hotter than 60°C.
Use of excessively hot water may cause damage to fabrics or cause leakage of water.
Ensure No water logging near or below washer to prevent rusting.
Rusting on certain parts may result in product failure
5
afety Information
S
WHEN USING
THE WASHER
WHEN NOT
IN USE
WARNING
This appliance is not intended for use by persons (including children) with reduced
•
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Do not use a plug socket and wiring equipment for more than their rated capacity.
Exceeding the limit may lead to electric shock, fire , break down, and/or deformation
of parts.
Do not mix chlorine bleach with other household chemicals such as toilet cleaners,
rust removers, acids (such as vinegar) or product containing ammonia.
Mixing different chemicals can produce toxic gases which may cause death.
Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted
with combustible or explosive substances (such as wax, oil, paint, gasoline, drycleaning solvents, kerosene, etc). Do not add these substances to the wash water.
Do not use or place these substances around your washer or dryer during operation.
It may ignite or explode.
Avoid electric heater, candle light, cigarette light, bug smoker, etc. near the machine.
It may ignite or deform the plastic part.
CAUTION
• Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage
if a break or rupture should occur. Check the condition of the fill hoses; they may need
replacement after 5years.
• When the air temperature is high and the water temperature is low, condensation may
occur and thus wet the floor.
• Wipe off dirt or dust on the contacts of the power plug.
Using unclean power plug may cause fire.
• Before discarding a washer, or removing it from service, remove the washer lid to
prevent children from hiding inside.
Children may be trapped and suffocated if the lid is left intact.
Do not attempt to repair or replace any part of this appliance unless
specifically recommended in this Owner’s Manual, or in published userrepair instructions that you understand and have the skills to carry out.
Operating the machine with improperly replaced parts may be a cause for fire or
electric shock.
Do not tamper with controls.
It may lead to electric shock, fire , break down, deformation.
Do not yank the power cord in an attempt to disconnect the power plug.
Securely hold the power plug to unplug the machine.
Failure to observe these instructions may cause electric shock or fire due to shortcircuit .
When you are cleaning the washing machine, do not apply water directly to
any part of the washing machine.
It will cause short circuit and electric shock.
6
dentification of Parts
I
Body
POWDER DETERGENT
BOX
SOFTENER INLET
Softener will automatically
flow into the tub.
BLEACH
DISPENSER
FUNCTION SELECTOR
TUB
START/PAUSE
*
BUTTON
Use to start or stop the
washing machine
temporarily.
*
WATER SUPPLY
HOSE
Make sure the water
does not leak.
*POWER PLUG
If the supply cord is
damaged, it must be
replaced by the
manufacturer
or its service agents
or similarly qualified
person in order to
avoid a hazard.
*MAGIC FILTER/LINT FILTER
Clean regularly to stop
linting on the clothes
load.
ADJUSTABLE LEGS
Use to level the washing
machine for correct balance
& spin operation.
Accessories
Water supply hoses
Note
"*" Parts can be different according to the model.
Introduction
Drain hose
Snap Ring
7
*Anti-rat cover
DRAIN HOSE
Keep the drain hose
flipped down while
washing is in process.
*BASE
*Lint Filter
lacing, Leveling and Installation
P
Improper installation of the washer may cause noise and malfunctioning.
1.
The ventilating openings in the base area must not be obstructed by carpeting when the washing machine is
Note :
installed on a carpeted floor.
Install the washing machine on a level and firm
2.
surface.
How to adjust leveling
Adjustable leg
Turn the adjustable legs to set the washer
horizontal (Both the front legs).
H
Don't add anything under back side legs.
Distance between drain hose and the wall
Distance between drain hose and the wall should be more
than 10cm, and the distance between the other part and
the wall should be more than 2 cm.
More than 10cm
Installation area
1
Install the washer on flat and firm surface.
Checking level
2
The Basement is not flat, fill the water just touching the
Pulsator and see uniform distribution. If not, adjust the
legs as shown in the figure.
Top View
Checking Proper placement
3
More than 2cm
More than 2cm
Anti-rat cover installation
* Insert the anti rat cover firmly from back side of washing machine.
Middle Base
* Parts can be different according to the model.
Press the corners of the machine diagonally
as shown in the figure, if any movement is observed,
adjust the legs for proper leveling.
Low Base
8
Installation
FIXING POSITION
Adjustable Leg
Screws
Anti Rat Cover
onnecting Water Supply Hose
C
Normal Type
Separate Middle connector from Water Supply Hose
1
Separate Middle connector from the Water
Supply Hose by pulling the Pressing Rod and the
Pressing Handle that is attached to the Water
Supply Hose
Loosen the fixed nuts to connect the connector to the tap
2
Untighten the screw of the connector so that the
tap can be placed in the middle.
NOTE
In case tap is too large.
If the tap diameter is too large or is square,
untighten the 4 screws and remove the guide
plate. Then follow step1
Fixing Connectors to the Tap
3
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
Fixing Upper Connector and Middle Connector
4
Remove the fixed sticker in between the Upper
and Middle Connectors. Tighten the connectors
by holding one connector and twist middle
connector to the right.
Connecting Middle Connector and Water Supply Hose
5
Press down the pressing rod of the Water Supply
Hose which was separated from middle connector
(refer to Step1) and then join it to the middle
connector.
(Normal tap without thread & one touch type inlet hose.)
Middle
connector
.
.
Water Supply Hose
Guide plate
Connector
Connector
Fixed sticker
Pressing rod
Fixed Sticker
Pressing Handle
Pressing Rod
Water Supply Hose
Rubber packing
screw
Fixed sticker
Rubber packing
Middle
Connector
Connector
Middle
Connector
Pressing handle
Check for water leakage
6
After connecting the hose, open the tap to check
for any water leakage.
If the connection leaks, close the tap and start
again from step 1.
If you skip step 1, water leakage may occur.
Installation
9
Loading...