RELEASING THIS DRAWING
WITHOUT PERMISSION LG
Electronics SHOULD BE
ACCUSED ACCORDING TO THE
LAWS AND COMPANY RULES.
이 도면은 LG전자의 자산으로 불법
유출시 관계법과 회사규정에 의해 처벌됨.
SEC.
WORK
60
210
가
BRAND
나
P/No.
LG
SIGNATURE
<FRONT> <BACK>
MFL68881060
PRINTING DEGREE
1
MATERIAL AND PRINTING DESCRIPTION
외지: 아트지 150g OFFSET 인쇄
LANGUAGE
English
내지: 모조지 80g OFFSET 인쇄
PAGE
44
PRODUCTREMARK
W-MODULELG SIGNATURE 24인치
양산처 : 국제인쇄
작업 주기
1. 재질 : 작업표에 준함.
2. 인쇄방법 : 작업표에 준함.
3. 인쇄 내용, 문자의 크기, 선의 굵기 및 형상 등은 주어진 도면에 준한다.
4. 외곽 치수는 절단 후 치수임.
5. 양산 전 설계 한도를 득할 것.
6. 본 부품에 금지 물질이 포함되지 않도록 하고, 상세 내용은 LG(63)-A-5501-34를 만족할 것.
148
4
3
2
유럽향 규격 문구 삭제.EAGH300755 17.03.18이승현 김영수
1
단가 등록 위한 가도면 이후 매뉴얼 등록.EAGH300249 17.03.08이승현 김영수
REV. NO.
기호
REVISION DESCRIPTION
변경 사항
REF. NO.
시방 번호
DATE
년/월/일
PREPARED
시방자
APPROVED
승인자
148
WORK SPECIFICATIONS
1. Material should be refer to work table.
2. Printing method should be refer to work table.
3. Printing contents, the size of text and font follow the LG Drawing.
4. There is the external dimension after cutting size.
5. Before product controlled by criteria sample.
6. Standard of supervision for hazardous material
The part should not contain prohibited substances and details should comply with LG standard of LG(63)-A-5501-34
DR COMPLETED
도면 DR 완료
완료일 :
TRIG.
김 은 지
17.02.2017.02.20
LG 전자 (주)
LG Electronics Inc.
UNIT SCALE
REVIEWED DESIGNED
mm
CHECKED APPROVED
이 승 현
최 차 림김 영 수
17.02.2017.02.20
N
RELATED DWG.
PDF
ILLUSTRATOR
S
T
I
Manual, Quick Guide
T
L
E
W-MODULE1/1
DWG.
No.
MFL68881060
www.LGSIGNATURE.com
OWNER'S MANUAL
MINI WASHER
Before beginning installation, read these instructions
carefully. This will simplify installation and ensure that
the product is installed correctly and safely. Leave these
instructions near the product after installation for future
reference.
The following safety guidelines are intended to prevent
unforeseen risks or damage from unsafe or incorrect operation
of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’
as described below.
This symbol is displayed to indicate matters and
operations that can cause risk. Read the part with this
symbol carefully and follow the instructions in order to
avoid risk.
WARNING
This indicates that the failure to follow the instructions can
cause serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can
cause the minor injury or damage to the product.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of explosion, fire, death, electric shock,
injury or scalding to persons when using this product, follow
basic precautions, including the following:
Children in the Household
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure
that they do not play with the appliance.
4
Installation
•Never attempt to operate the appliance if it is damaged,
malfunctioning, partially disassembled, or has missing or broken
parts, including a damaged cord or plug.
•This appliance should only be installed and transported by two or
more people holding the appliance securely.
•Do not install the appliance in a damp and dusty place. Do not
install or store the appliance in any outdoor area, or any area that
is subject to weathering conditions such as direct sunlight, wind, or
rain or temperatures below freezing.
•Tighten the drain hose to avoid separation.
EN
5
EN
•If the power cord is damaged or the hole of the socket outlet is
loose, do not use the power cord and contact an authorized service
centre.
•This appliance must not be installed behind a lockable door, a
sliding door or a door with a hinge on the opposite side to that of
the appliance, in such a way that a full opening of the appliance
door is restricted.
•This appliance must be grounded. In the event of malfunction or
breakdown, grounding will reduce the risk of electric shock by
providing a path of least resistance for electric current.
•This appliance is equipped with a power cord having an equipment-
grounding conductor and a grounding power plug. The power plug
must be plugged into an appropriate socket outlet that is installed
and grounded in accordance with all local codes and ordinances.
•Improper connection of the equipment-grounding conductor can
result in risk of electric shock. Check with a qualified electrician or
service personnel if you are in doubt as to whether the appliance is
properly grounded.
•Do not modify the power plug provided with the appliance. If it
does not fit the outlet, have a proper outlet installed by a qualified
electrician.
6
EN
Operation
•Do not use a sharp object like drill or pin to press or separate an
operation unit.
•Do not repair or replace any part of the appliance. All repairs
and servicing must be performed by qualified service personnel
unless specifically recommended in this Owner’s Manual. Use only
authorized factory parts.
•Use new hose or hose-set supplied with the appliance. Reusing old
hoses can cause a water leak and subsequent property damage.
•Do not reach into the appliance if the tub or agitator is moving.
•Keep the area underneath and around the appliance free of
combustible materials such as lint, paper, rags, chemicals, etc.
•Do not put animals, such as pets into the appliance.
•Do not leave the appliance door open. Children may hang on the
door or crawl inside the appliance, causing damage or injury.
•Never reach into the appliance while it is operating. Wait until the
drum has completely stopped.
•Do not put in, wash or dry articles that have been cleaned in,
washed in, soaked in, or spotted with combustible or explosive
substances (such as wax, oil, paint, gasoline, degreasers,
drycleaning solvents, kerosene, vegetable oil, cooking oil, etc.).
Improper use can cause fire or explosion.
•In case of flood, disconnect the power plug and contact the LG
Electronics customer information centre.
•Do not push down the drawer excessively, when the appliance
drawer is open.
7
EN
•Do not touch the door during a high temperature programme.
•Do not use flammable gas and combustible substances (benzene,
gasoline, thinner, petroleum, alcohol, etc.) near the appliance.
•If the drain hose or inlet hose is frozen during winter, use it only
after thawing.
•Keep all washing detergents, softener and bleach away from
children.
•Do not touch the power plug or the appliance controls with wet
hands.
•When pulling out the power plug from an outlet, hold the power
plug, not the cable.
•Do not bend the power cable excessively or place a heavy object
on it.
•If there is a gas leakage (isobutane, propane, natural gas, etc.),
do not touch the appliance or power plug and ventilate the area
immediately.
•Do not operate Mini Washer with two or more Mini Washers
stacked.
•To avoid breaking the door glass, do not push too hard on the door
when closing.
•Do not step on Mini Washer.
•Do not wash rugs, mats, shoes or pet blankets, or any other items
other than clothes or sheets, in this machine.
•This appliance must only be used for domestic household purposes
and should not be used in mobile applications.
•Do not open or close the door by foot.
8
EN
Maintenance
•Securely plug the power plug in the socket outlet after completely
removing any moisture and dust.
•Disconnect the power cord before cleaning the appliance.
•Never unplug the appliance by pulling on the power cable. Always
grip the power plug firmly and pull straight out from the socket
outlet.
•Do not spray water inside or outside the appliance to clean it.
Disposal
•Before discarding an old appliance, unplug it. Cut off the cable
directly behind the appliance to prevent misuse.
•Dispose of all packaging materials (such as plastic bags and
styrofoam) away from children. The packaging materials can cause
suffocation.
•Remove the door before disposing of or discarding this appliance to
avoid the danger of children or small animals getting trapped inside.
9
INSTALLATION
4
10
Parts
EN
6
3
1
2
4
11
5
10
9
7
8
1
Door
2
Drum
3
Stacking Switch
Control Panel
5
Drawer
6
Water Supply Hose
10
7
Power Plug
8
Water Drain Hose
9
Leveling Feet
Unlock Button
11
Remote Sensor
Accessories
EN
Water supply hose
(for cold water)
Anti-slip sheets
(2 EA)
* Screws
Type A (37 EA)
Type B (5 EA)
Type C (3 EA)
* Type A : long sheet metal screw, Type B : short sheet metal screw, Type C : machine screw
Connecting
supply hose
Detergent
measuring
cup
Cable ties
(2 EA)
Water drain hose Water supply hose
Brackets (front)
(2 EA)
Band clampStacking holderRemote control
connector
Brackets (back)
(2 EA)
Water drain hose
connector
Spanner
NOTE
• Different accessories may apply to each model.
• The stacking holder is for preventing independent operation.
• Depending on the installation environment, you may have to purchase a separate drain hose
connector.
• In addition to the screws required for installation, extra screws have been provided.
• Appearance and specifications may change without notice to improve the quality of the product.
11
EN
Installation Place
Requirements
Location
135 cm
123 cm
2 cm
110 cm
*125 cm
10 cm
60 cm
*125 cm: minimum space for installation
Level floor : Allowable slope under the entire
appliance is 1°.
Power outlet : Must be within 1.5 meters of
either side of the location of the appliance.
Additional Clearance : 5 cm at the sides and 10
cm behind the unit.
• Do not place or store laundry products on top
of the appliance at any time. These products
may damage the finish or controls.
WARNING
• The plug must be plugged into an appropriate
outlet that is properly installed and grounded
in accordance with all local codes and
ordinances.
Positioning
• Install the appliance on a flat hard floor.
• Make sure that air circulation around the
appliance is not impeded by carpets, rugs, etc.
• Never try to correct any unevenness in the
floor with pieces of wood, cardboard or similar
materials under the appliance.
• If it is impossible to avoid positioning the
appliance next to a gas cooker or coal burning
stove, an insulation (85x60 cm) covered with
aluminum foil on the side facing the cooker
or stove must be inserted between the two
appliances.
0.5 cm
125 cm
5 cm5 cm
• Do not install the appliance in rooms where
freezing temperatures may occur. Frozen
hoses may burst under pressure. The reliability
of the electronic control unit may be impaired
at temperatures below freezing point.
• Ensure that when the appliance is installed, it
is easily accessible for an engineer in the event
of a breakdown.
• With the appliance installed, adjust all four
feet using a transit bolt spanner to ensure
the appliance is stable, and a clearance of
approximately 5 mm is left between the top of
the appliance and the underside of any worktop.
• If the appliance is delivered in winter and
temperatures are below freezing, place the
appliance at room temperature for a few hours
before putting it into operation.
• Do not use a drip pan as it can block the
drawer. Using the drip pan may result in
increased vibration and noise during operation.
WARNING
• This appliance is not designed for maritime
use or for use in mobile installations such as
caravans, aircraft etc.
Electrical Connection
• Do not use an extension cord or double
adapter.
• Always unplug the appliance and turn off the
water supply after use.
• Connect the appliance to an earthed socket in
accordance with current wiring regulations.
• The appliance must be positioned so that the
plug is easily accessible.
• Repairs to the appliance must only be carried
out by qualified personnel. Repairs carried out
by inexperienced persons may cause injury
or serious malfunctioning. Contact your local
service centre.
12
EN
Stacking Mini Washer
Stacking holder
Brackets (front)
Brackets (back)
Brackets (front) Brackets (back) Stacking holder
NOTE
• The error message appears on the
display, if the stacking holder is not attached to
the bottom of the Main Washer.
Tilt and hold Main Washer.
1
Assemble the bracket (front) and stacking
2
holder at the bottom of Main Washer.
• First assemble the stacking holder using
2 type A screws included in the accessory
box, then each bracket using 7 type A
screws included in the accessory box.
2
1
3
Pull and save the foam block for future use.
3
If Mini Washer must be moved in the future,
the foam block will help prevent damage to
Mini Washer during transportation.
NOTE
• To prevent damage, do not remove the
foam block until Mini Washer is at the final
location.
13
EN
Turn the top cover about 180 degrees.
4
Cover the upper hole with the top cover and
install 4 type B screws to fix it in place.
Attach the two back brackets on the rear
5
top of the Mini Washer by inserting 4 type A
screws in each bracket.
Securely attach the two appliances at the
7
corners using 14 type A screws.
• First, insert screws on each side. Then
insert screws on the front and back side.
NOTE
• It can be difficult to assemble if it is not
assembled in the proper order.
• Use two type C screws to assemble the
stacking holder.
1
Stacking holder
Turn the feet of Main Washer slightly until it
8
is snugged up against Mini Washer.
1
2
3
Place Main Washer on top of Mini Washer.
6
• Make sure the 4 legs are totally locked and
the holes of Mini Washer align with the
holes of Main Washer.
Washer leg
14
NOTE
• Mini Washer will not work as a standalone unit.
Washer leg
Loading...
+ 34 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.