LG T1466NEHGU, T1288NEHGE Owner's Manual [ar,en]

MFL68781048

T1388NEHGE

OWNER’S MANUAL

WASHING MACHINE

Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference.

ENG/ ARA

6848 MFL68781048 T8588NEHGE ASFPEECRev.00_092420

EN ENGLISH

T1369NEHTF T1369NEHT

Note

1.Material : : Printing and exterier size are refer to work table

2.Print : Print with Paper size A5

3.Exterier size on the

4.Before product controlled by criteria sample.

5.This part should not contain prohibited substances (Pb,Cd,Hg,Cr+6,PBB,PBDE,DIBP,DBP,BBP,DEHP) and details should comply with LG standard

of LG(THWM)-B-4501-16

drawing is cutting line A5

Snow white Paper (60 g/m )

www.lg.com

MFL68862014

Rev.00_021020

ขอกําหนด

วัสดที่ใช : สิ่งพิมพ์ และ ขนาดที่ตัดแลว ยึดตามที่ได กําหนดไว กระดาษแบบ Snow white (60 g/m )

การพิมพ์ : พิมพ์ขนาด A5 หนาหลัง ตามแบบที่กําหนดไว

ขนาด

Cutting line

คือขนาดหลังทําการตัดแล

ว ควรตรวจสอบคณภาพ ของ ชิ้นงานก่อนการผลิต ชิ้นงานนี้จะไม่ใชสารที่เป็นอันตราย

( Pb,Cd,Hg,Cr+6,PBB,PBDE,DIBP,DBP,BBP,DEHP) และจะ

ปฏิบัติตามมาตรฐาน LG(THWM)-B-4501-16

Sasipa T.

24/09/20

24/09/20 24/09/20

For Sapience Pro 23 BLDC

MFL68781048

global_main.book.book Page 1 Thursday, September 24, 2020 1:30 PM

OWNER'S MANUAL

WASHING MACHINE

ENGLISH

T1288NEHGE / T1366NEHGU / T1388NEHGE / T1388NEHG2 / T1466NEHGU / T1466NEHGJ

www.lg.com

MFL68781048

Rev.00_092420

global_main.book.book Page 2 Thursday, September 24, 2020 1:30 PM

TABLE OF CONTENTS

This manual may contain images or content that may be different from the model you purchased.

This manual is subject to revision by the manufacturer.

SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE........................................................... 3

WARNING............................................................................................................3

INSTALLATION

Parts and Specifications ....................................................................................8

Installation Place Requirements ....................................................................10

Connecting the Water Inlet Hoses.................................................................11

Installing the Drain Hose ................................................................................12

Levelling the Appliance ...................................................................................12

OPERATION

Operation Overview.........................................................................................14

Preparing Laundry...........................................................................................14

Adding Detergents, Softeners and Bleaches................................................16

Control Panel ....................................................................................................18

Programme Table ............................................................................................19

Extra Options and Functions ..........................................................................21

SMART FUNCTIONS

LG ThinQ Application.......................................................................................25

Smart Diagnosis ...............................................................................................25

MAINTENANCE

Cleaning after Every Wash..............................................................................26

Cleaning the Appliance Periodically ..............................................................26

TROUBLESHOOTING

Before Calling for Service................................................................................29

WARNING

global_main.book.book Page 3 Thursday, September 24, 2020 1:30 PM

SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance.

The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below.

Safety Messages

This symbol is displayed to indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.

WARNING

This indicates that the failure to follow the instructions can cause serious injury or death.

CAUTION

This indicates that the failure to follow the instructions can cause minor injury or damage to the product.

ENGLISH

WARNING

To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following:

Technical Safety

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

global_main.book.book Page 4 Thursday, September 24, 2020 1:30 PM

SAFETY INSTRUCTIONS

• Children should be supervised to ensure that they do not play with the appliance.

• Cleaning and user maintenance shall not be made by children without supervision.

• If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• Ventilation openings must not be obstructed by a carpet.

• This appliance is intended to be used in household only.

• Use a new hose or hose-set supplied with the appliance. Reusing old hoses can cause a water leak and subsequent property damage.

• The inlet water pressure must be between 50 and 800 kPa.

Maximum Capacity

The maximum capacity in some cycles for dry clothes to be washed is:

T1366NEHGU /

T1288NEHGE

T1388NEHGE /

T1388NEHG2

12 kg 13 kg

T1466NEHGU /

T1466NEHGJ

14 kg

Installation

• Never attempt to operate the appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

• This appliance should only be transported by two or more people holding the appliance securely.

• Do not install the appliance in a damp and dusty place. Do not install or store the appliance in any outdoor area, or any area that is subject to weathering conditions such as direct sunlight, wind, rain, or temperatures below freezing.

• Make sure the power plug is completely pushed into the power outlet.

global_main.book.book Page 5 Thursday, September 24, 2020 1:30 PM

SAFETY INSTRUCTIONS

• Do not plug the appliance into multiple outlet sockets or an extension power cable.

• Do not modify the power plug provided with the appliance. If it does not fit the power outlet, have a proper outlet installed by a qualified electrician.

• This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.

• This appliance is equipped with a power cord having an equipmentgrounding conductor and a grounding power plug. The power plug must be plugged into an appropriate outlet socket that is installed and grounded in accordance with all local codes and ordinances.

• Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service personnel if you are in doubt as to whether the appliance is properly grounded.

• Tighten and secure the drain hose at connecting ends to avoid separation.

ENGLISH

• For models with only one inlet water supply valve, do not connect to hot water. Connect to cold water only.

Operation

• Do not apply any sharp objects to the control panel in order to operate the appliance.

• Do not attempt to separate any panels or disassemble the appliance.

• Do not repair or replace any part of the appliance. All repairs and servicing must be performed by qualified service personnel unless specifically recommended in this Owner's Manual. Use only authorized factory parts.

• Do not put animals, such as pets into the appliance.

• Keep the area underneath and around the appliance free of combustible materials such as lint, paper, rags, chemicals, etc.

• Do not leave the appliance door open. Children may hang on the door or crawl inside the appliance, causing damage or injury.

global_main.book.book Page 6 Thursday, September 24, 2020 1:30 PM

SAFETY INSTRUCTIONS

• Do not put in, wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as waxes, wax removers, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, petrol, spot removers, turpentine, vegetable oil, cooking oil, acetone, alcohol, etc.). Improper use can cause fire or explosion.

• Do not use or store flammable or combustible substances (ether, benzene, alcohol, chemical, LPG, combustible spray, insecticide, air freshener, cosmetics, etc.) near the appliance.

• Never reach into the appliance while it is operating. Wait until the drum has completely stopped.

• In case of a water leak from the appliance, disconnect the power plug and contact the LG Electronics customer information centre.

• Turn off water taps to relieve pressure on hoses and valves and to minimize leakage if a break or rupture should occur. Check the condition of the fill hoses; they may need replacement after 5 years.

• If there is a gas leakage (isobutane, propane, natural gas, etc.) within the home, do not touch the appliance or power plug and ventilate the area immediately.

• If the drain hose or inlet hose is frozen during winter, use it only after thawing.

• Keep all washing detergents, softener and bleach away from children.

• Do not touch the power plug or the appliance controls with wet hands.

• Do not bend the power cable excessively or place a heavy object on it.

• Do not put your hand, foot or anything under the appliance while the appliance is in operation.

• Avoid touching any water that is drained from the appliance during the wash.

• Make sure that drainage is working properly. If water is not drained properly, your floor may get flooded.

global_main.book.book Page 7 Thursday, September 24, 2020 1:30 PM

SAFETY INSTRUCTIONS

• If, during spinning, opening the door does not stop the drum within about 10 seconds, immediately discontinue operating the appliance and contact your dealer or LG Electronics service centre.

• Do not use a power outlet, wiring equipment and extension cord of which the electric capacity is lower than the appliance's rated capacity.

• When the air temperature is high and the water temperature is low, condensation may occur and thus wet the floor.

• Wipe off dirt or dust on the contacts of the power plug.

Maintenance

• Disconnect the appliance from the power supply before cleaning the appliance. Setting the controls to the OFF or stand by position does not disconnect this appliance from the power supply.

• Securely plug the power plug in the outlet socket after completely removing any moisture and dust.

• Do not spray water inside or outside the appliance to clean it.

ENGLISH

• Never unplug the appliance by pulling on the power cable. Always grip the power plug firmly and pull straight out from the outlet socket.

• Only qualified service personnel from LG Electronics service centre should disassemble, repair, or modify the appliance. Contact an LG Electronics customer information centre if you move and install the appliance in a different location.

Disposal

• Before discarding an old appliance, unplug it. Cut off the cable directly behind the appliance to prevent misuse.

• Dispose of all packaging materials (such as plastic bags and styrofoam) away from children. The packaging materials can cause suffocation.

• Remove the door before disposing of or discarding this appliance to avoid the danger of children or small animals getting trapped inside.

NOTE

global_main.book.book Page 8 Thursday, September 24, 2020 1:30 PM

INSTALLATION

Parts and Specifications

• Appearance and specifications may change without notice to improve the quality of the appliance.

Front View

* This feature is only available on some models.

Door

Tempered Glass

Detergent Dispenser Drawer

Fabric Softener Dispenser

Bleach Dispenser

Drum

Levelling Feet

Drain Hose*

Control Panel

Lint Filter*

Power Cord

Hot and Cold Water Inlets

Accessories

*1 The included accessories vary depending on the

model you purchased.

*2 This accessory is not included in the product, but

you can purchase it from the LG service centre.

Cold and Hot Water Inlet Hoses

Drain Hose

Anti-Rat Cover

Screw for Anti-Rat Cover

global_main.book.book Page 9 Thursday, September 24, 2020 1:30 PM

INSTALLATION

Specifications

Model

Power Supply 220 - 240V~, 50 Hz

Product Weight Approx. 39 kg

Dimension(mm)

W 590 D 606 H 960

D' 620 H' 1310

T1288NEHGE / T1366NEHGU / T1388NEHGE /

T1388NEHG2 / T1466NEHGU / T1466NEHGJ

D’ D

H’

ENGLISH

WARNING

NOTE

WARNING

global_main.book.book Page 10 Thursday, September 24, 2020 1:30 PM

INSTALLATION

Installation Place Requirements

Before installing the appliance, check the following information in order to install the appliance in a correct place.

Installation Location

• Install the appliance on a flat floor of hard material that is strong enough to support a fully loaded appliance. (Allowable slope under the appliance: 1º)

• Never try to level any uneven floor by putting pieces of wood, cardboard or similar materials under the appliance.

• If it is impossible to avoid positioning the appliance next to a gas cooker or coal burning stove, an insulation (85 X 60 cm) covered with aluminium foil on the side facing the cooker or stove must be inserted between the two appliances.

• Ensure that when the appliance is installed, it is easily accessible for a service technician in the event of a breakdown.

• Additional clearance for the wall should have

for the rear and

2 cm

for right and left side.

Ventilation

• Make sure that air circulation around the appliance is not impeded by carpets, rugs, etc.

Ambient Temperature

• Do not install the appliance in rooms where freezing temperatures may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.

• If the appliance is delivered in winter and temperatures are below freezing, place the appliance at room temperature for a few hours before putting it into operation.

Electrical Connection

• Do not use an extension cord or double adapter.

• Always unplug the appliance and turn off the water supply after use.

• Connect the appliance to an earthed socket in accordance with current wiring regulations.

• The appliance must be positioned so that the plug is easily accessible.

• Power outlet must be within 1.5 meters of either side of the appliance.

10 cm2

• This appliance must only be used for domestic household purposes and should not be used in mobile applications.

• Do not install this appliance on a raised surface or platform, plinth or stand. It may cause injury or serious malfunctioning.

• Repairs to the appliance must only be carried out by qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local authorised LG repairer.

• The power plug must be plugged into an appropriate outlet socket that is installed and grounded/earthed in accordance with all local codes and ordinances.

NOTE

global_main.book.book Page 11 Thursday, September 24, 2020 1:30 PM

Connecting the Water Inlet Hoses

Before connecting the water inlet hose to the water tap, check the hose fitting type and then choose the correct instruction.

Note for Connection

• Water supply pressure must be between and

800 kPa

(0.5 - 8.0 kgf / cm²). If the water supply pressure is more than decompression device should be installed.

• Do not overtighten the water inlet hose to the valve.

• Periodically check the condition of the hose and replace the hose if necessary.

800 kPa

Checking the Rubber Seal

Two rubber seals a are supplied with the water inlet hoses. They are used to prevent water leaks. Connection to taps is sufficiently tight.

• Do not use mechanical devices such as multi grips to tighten the inlet hoses. Ensure that the curved end of the water inlet hose is connected to the appliance.

50 kPa

, a

INSTALLATION

Connecting the Hose to the Water Tap

Connecting Screw-Type Hose to Tap with Thread

Screw the hose connector onto the water supply tap. Hand tighten only with the aid of a soft cloth.

• After connecting the water inlet hose to the water tap, turn on the water tap to flush out foreign substances (dirt, sand, sawdust, and etc.) in the water lines. Let the water drain into a bucket, and check the water temperature.

Connecting the Hose to the Appliance

ENGLISH

Screw the water inlet hose to the water inlet valve on the back of the appliance.

• Do not connect the hose to the hot water supply for models with one water inlet. Connect to the cold water supply only.

NOTE

global_main.book.book Page 12 Thursday, September 24, 2020 1:30 PM

INSTALLATION

NOTE

• After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type of tap for the water supply. In case that the tap is square or too big, remove the guide plate before inserting the tap into the adaptor.

• The discharge height should be approximately

90 - 120 cm

Levelling the Appliance

Checking the Level

Installing the Drain Hose

Before connecting the drain hose, check your drain hose model and choose the correct instruction.

Installing the Drain Hose with the Elbow Bracket

The drain hose must not be placed higher than

above the floor. Water in the appliance may not

drain or may drain slowly.

• Securing the drain hose correctly will protect the floor from damage due to water leakage.

Levelling the appliance prevents unnecessary noise and vibration. Check whether the appliance is perfectly level after installation.

• If the appliance rocks when pushing the top plate of the appliance diagonally, adjust the feet again.

120

Adjusting and Levelling the Feet

When the appliance is not perfectly level, turn the adjustable feet until the appliance no longer wobbles.

• Turn the adjustable feet clockwise to raise or turn the adjustable feet counterclockwise to lower the appliance.

from the floor.

FP

• If the drain hose is too long, do not force the drain hose further into the drain outlet. This will cause abnormal noise.

• When installing the drain hose to a sink, secure it tightly with the some string, cable tie, or chain.

FP

NOTE

• Do not insert pieces of wood etc. under the feet.

global_main.book.book Page 13 Thursday, September 24, 2020 1:30 PM

• Timber or suspended type flooring will contribute Reinforcing or bracing the timber floor may need to stop or reduce excessive noise and vibration.

• Do not install the appliance on any elevated surface or platform, as it may become unstable and cause serious injury and damage.

• If the appliance is installed on a uneven, weak or tilted floor causing excessive vibration, spin failure or UE error can occur. It must be placed

on a firm and level floor to prevent spin failure.

to excessive vibration and unbalance.

Assembling the Anti-Rat Cover

You can insert the anti-rat cover according to the type to protect the appliance from the rat.

Flat Type

Insert the flat type of the anti-rat cover to the assembling hole from the front of the appliance.

INSTALLATION

ENGLISH

NOTE

global_main.book.book Page 14 Thursday, September 24, 2020 1:30 PM

OPERATION

Operation Overview

Using the Appliance

Before the first wash, select the programme and add a half amount of detergent. Start the appliance without laundry.

• This will remove residue and water from the drum that may have been left during manufacturing.

Sort laundry and load items.

• Sort laundry by fabric type, soil level, colour and item size as needed. Open the door and load items into the appliance.

Add detergent, fabric softener and/or bleach.

• Add the proper amount of detergent to the detergent dispenser drawer. If desired, add bleach or fabric softener to the appropriate areas of the dispenser.

Turn on the appliance.

• Press the appliance.

Choose the desired wash cycle.

• Press the the desired programme is selected.

• Select the option button to adjust wash temperature, spin speed, etc. Refer to a fabric care label of your clothes for any warning or special instructions.

Begin cycle.

• Press the cycle.

• The appliance will agitate briefly without water to measure the weight of the laundry.

• If the within a certain time, the appliance will shut off and all settings will be lost.

POWER

Program

START/PAUSE

Normal

button to turn on the

button repeatedly until

button to begin the

button is not pressed

End of cycle.

• When the cycle is finished, a melody will sound. Immediately remove your clothing from the appliance to reduce wrinkling.

• The

Auto Restart

restart by itself in case of power failure. It resumes from the stage where it stopped.

Preparing Laundry

Sort laundry for best washing results, and then prepare laundry according to the symbols on the care labels.

Sorting the Clothes

• For best washing results, sort your clothes according to a care label stating fabric type and washing temperature. Adjust the spin speed to wash them.

• Soil level (Heavy, Normal, Light): Separate clothes according to soil level. If possible, do not wash heavily soiled items with lightly soiled ones.

• Colour (White, Lights, Darks): Wash separately dark or dyed clothes from whites or light colours. Mixing dyed clothes with light clothes can result in dye transfer or discolouration of lighter clothes.

• Lint (Lint producers, Collectors): Wash separately lint producing fabrics from lint collecting fabrics. Lint producers can result in pilling and linting on the lint collectors.

function allows the cycle to

NOTE

CAUTION

global_main.book.book Page 15 Thursday, September 24, 2020 1:30 PM

Checking the Fabric Care Label

This will tell you about the fabric content of your clothes and how it should be washed.

Symbols on the Care Labels

Symbol Wash / Fabric type

• Normal Wash

• Cotton, Mixed Fabrics

• Easy Care

• Synthetic, Mixed Fabrics

• Special Delicate Wash

• Delicates

• Hand Wash Only

• Wool, Silk

• Do not wash

• The dashes under the symbol give you information about the type of fabric and the maximum allowance of mechanical stress.

Checking the Laundry before Loading

OPERATION

cause irreparable damage to both your appliance and clothes.

• Wash delicates (stockings, underwired bras) in a wash net.

• Close zippers, hooks and strings to make sure that these items do not snag other clothes.

• Pre-treat dirt and stains by saturating the dirt and stains with dissolved detergent and brushing them in order to remove dirt.

• Do not wash or spin any item labelled or known to be water-proof or water-resistant, even if the product care label on the item permits machine washing. Failure to follow these instructions could result in severe damage to your washing load, your appliance and/or property damage as a result of abnormal load friction or vibration of the appliance.

- Examples of water-proof or water-resistant

items include certain mattress pads, mattress covers, rain gear, camping gear, skiing apparel, outdoor gear and similar items.

ENGLISH

• Combine large and small items in a load. Load large items first. Large items should not be more than half of total load.

• Do not wash single small items. Add 1 - 2 similar items to the load to prevent an out-of-balance load.

• Make sure to empty all pockets. Items such as hair clips, lighters, pens, coins and keys can

CAUTION

NOTE

global_main.book.book Page 16 Thursday, September 24, 2020 1:30 PM

OPERATION

Adding Detergents, Softeners and Bleaches

Detergent Dosage

• Detergent should be selected according to fabric type, colour, soil level and washing temperature and should be used according to the detergent manufacturer’s instructions.

• Too much detergent results in excessive suds which cause poor washing.

• When you use liquid detergent, follow the guidelines provided by the detergent manufacturer.

• You can pour liquid detergent directly into the main detergent drawer if you are starting the wash cycle immediately. It is also recommended that it be added into the drum when loading the clothes.

• Do not use liquid detergent if you are using delay or pre-wash function as the liqluid may harden.

• Reduce the amount of detergent if too many suds are formed.

• Detergent usage may need to be adjusted for water temperature, water hardness, size and soil level of the laundry. For best results, avoid oversudsing.

• Refer to the label of the clothes, before choosing the detergent and water temperature.

• Use only suitable detergents for the respective type of clothing:

- General powdered detergents for all types of

fabric

- Powdered detergents for delicate fabric

- Liquid detergents for all types of fabric or

designated detergents only for wool

• For better washing performance and whitening, use detergent that contains general powdered bleach.

• Detergent is dispensed from the dispenser at the beginning of the cycle.

• Dilute liquid detergent with water, pour into the drum and start the cycle.

• Using liquid detergent without diluting, or leaving laundry for a long time after pouring diluted liquid detergent into the drum might cause the clothes to be damaged, bleached, discoloured.

• Do not let the detergent harden. Doing so may lead to blockages, poor rinse performance or odour.

• Full load: According to manufacturer’s recommendation.

• Part load: 3/4 of the normal amount

• Minimum load: 1/2 of full load

Adding Detergents

• Add the measured amount of detergent into the detergent compartment

• Use more detergent if you have hard water, large items, greasy or oily soils or lower water temperature.

• Soap flakes or granulated soap powders should not be used in the appliance. When washing woollens, remember to use detergent suitable for washing woollens.

• Use the appropriate amount of detergent. Too much detergent, bleach or softener may cause an overflow or a malfunction.

NOTE

CAUTION

global_main.book.book Page 17 Thursday, September 24, 2020 1:30 PM

Adding Fabric Softeners

• Dilute fabric softener with water. Undiluted fabric softener may result in spots that look like oil stain.

• Measure and add the recommended amount of fabric softener into the compartment marked with the symbol on the top tub.

- Follow manufacturer’s direction.

- Fabric softener is automatically dispensed in

the final rinse with indication beep.

- If you want extra rinse, you must add fabric

softener manually when indication beep rings in the final rinse. This maximizes the fabric softener function.

• Do not overfill. The dispenser holds max 35 mL. Never add more than 35 mL. Overfilling can cause early dispensing of the fabric softener which could result in stained clothes. A cup with a pouring spout will help you avoid spelling.

• The effect of adding fabric softener may vary according to its viscosity. The sticker fabric softener makes its effect lower. For a sticky softener it is recommended that it be diluted with water, then be manually put during the time when the washer beeps several times before the final rinse. This function informing correct time dispense manually is optionally applied to some models. Please keep it in mind that fabric softener has to be diluted with water before dispensed and poured directly on clothes.

OPERATION

• Option washing is not designed to be used with fabric softener dispenser.

Adding Liquid Bleaches

• Before starting the appliance, pour the measured amount of bleach directly into the

bleach dispenser overfilling.

• Mix powdered bleach with water to a liquid consistency and pour it into the bleach dispenser.

• Check clothing care label for special instructions and separate the laundry to be bleached.

• Dilute liquid chlorine bleach with water.

• Measure the recommended amount of liquid bleach carefully according to instructions on the bottle.

• Never pour undiluted liquid bleach directly onto laundry or into the wash basket. This may cause change of colour or damage to the laundry.

• Do not pour powdered bleach into the bleach dispenser. Powdered bleach may harden, so it will block the bleach dispenser.

. Avoid splashing or

ENGLISH

• Do not mix with detergent or bleach.

• Never pour fabric softener directly on clothes. It may stain them.

• Do not stop the washer during the first spin for timely dispensing.

NOTE

global_main.book.book Page 18 Thursday, September 24, 2020 1:30 PM

OPERATION

Control Panel

Control Panel Features

Press & Hold 3 seconds for Extra Function

POWER Button

• Press this button to turn on or off the appliance.

• The appliance automatically turns off once a certain time has passed after the wash has completed.

START/PAUSE Button

• Press this button to start or pause a wash cycle.

• Press this button to stop a wash cycle temporarily.

• If the wash is not recommenced within turn off.

Program Button

• Programmes are available according to the laundry type.

• The lamp will light up to indicate the selected programme.

Extra Options and Functions

• You can use the extra options and functions to customize the programmes.

Cycle Status Indicator

60 minutes

when in pause, then the appliance will automatically

NOTE

global_main.book.book Page 19 Thursday, September 24, 2020 1:30 PM

OPERATION

• The cycle status indicator is turned on before the start.

• The cycle status indicator blinks during that process, and then the indicator turns off when that process has completed.

Display

• The display shows the settings, remaining estimated time, options, and status messages. When the appliance is turned on, the default settings in the display will light up.

18:88

: When a programme is selected, the default time for that programme is displayed. The time

• can change as options are selected.

-:--

- If the display shows

laundry size.

- The time shown is only an estimate. Several external factors (laundry size, room temperature,

incoming water temperature, etc.) can affect the actual time.

•

: This icon turns on when the

•

, then the time will be displayed after the load sensing has detected the

Child Lock

Delay

function is selected to lock the controls.

button is pressed to set a time delay.

Programme Table

Washing Programme

Wash programmes are designed for the best wash performance for different types of clothes.

• Press the

• When you select a wash programme, the light for the corresponding wash programme will turn on.

Program

button to select the desired programme.

ENGLISH

Normal

Description Use this programme to wash normal laundry. The built-in sensor detects the

weight of the laundry, calculating wash, rinse and, spin settings accordingly.

• If water or wet laundry is already in the drum before the start, the water level will be increased.

• For lightweight and bulky items, the water level may be too low. Increase the water level manually.

Wool

Description Use this programme to wash delicate fabrics such as lingerie and woollens. Before

washing, check the care label for the washing instructions.

• This programme uses a slow spin to prevent the clothes from being damaged, so the laundry has more moisture than normal.

• Hang or lay your delicates flat when you dry them.

• Only cold water will be used for this programme as hot water may damage laundry.

CAUTION

global_main.book.book Page 20 Thursday, September 24, 2020 1:30 PM

OPERATION

Duvet

Description Use this programme to wash a blanket or bedclothes that have the hand wash sign

on the care label.

• Cashmere bedclothes, acrylic blanket, mixed spinning blanket, woollen blanket, infilling (polyester 101), and bed sheets might be damaged if they are allowed to float. It is recommended to purchase a separate laundry net to wash.

• Separate bed clothes from general clothes. It might cause laundry to be unbalanced, which results in abnormal washing.

• Spin dry might take longer to redistribute the laundry evenly if bedclothes are lumped to a side.

• Never wash an electric blanket, carpets, rugs, pet accessories, soft toys or shoes. It can cause damage to the appliance and other items in the wash.

• Put bedclothes into a laundry net and then soak and sink them in water so that they are less likely to float. If the items float during the wash or spin, it may damage the appliance and the clothes.

• Regardless of size, we recommend washing bedclothes individually. If two bedclothes with different materials are washed at the same time, it might cause a spin malfunction due to imbalance.

• When putting a blanket into the drum, do not load it over the maximum line a. The blanket must also be submerged in the water. Failure to do so or overloading the blanket in the appliance will result in damage to the wash load and the appliance.

Silent

Description Use this programme to wash clothes quietly especially during late night and dawn.

Normal

• This programme has a longer washing time than the

• To reduce noise in spinning, this programme uses a slow spin to prevent the clothes from being damaged, so the laundry has more moisture than normal.

Pre Wash+Normal

Description Use this programme to pretreat immediate stain without handwash.

• It is necessary for clothes which could smell bad if they are not washed promptly.

programme.

+ 48 hidden pages