lg STUDIOWORKS 76I owners manual

Colour Monitor

USER GUIDE
BENUTZERHANDBUCH
MANUEL D'UTILISA TION
GUIDA UTENTE
GUIA DEL USUARIO

MODEL : StudioWorks 76i

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for
a Class B digital device pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.

This equipment generates, uses and can radiate radio frequency
energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.

If this equipment does cause harmful interference to radio or television
reception (which can be determined by turning the equipment off and
on), the user is encouraged to try to correct the interference by using
one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for
help.

Caution: Changes or modifications not expressly approved by LG
Electronics Inc. for compliance could void the user's (or your) authority
to operate the equipment. Only peripherals (digital input/output devices,
terminals, printers, etc.) certified to comply with the Class B limits may
be attached to this monitor. Operation with non-certified peripherals is
likely to result in interference to radio and TV reception.

Only shielded Signal Cables may be used with this System.

Canadian D. O. C Notice

Suggested text for the notice indication compliance with this Standard:

This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences
du Règlement sur le matériel brouilleur du Canada.

DECLARATION OF CONFORMITY

We LG Electronics Inc.

184 Kongdan-dong Kumi-city KOREA
declare on our own responsibility, that the product:
Kind of equipment: Monitor
Type-designation: StudioWorks 76i
is in compliance with following norm(s) or documents:
EN 55022/4.1982, EN 50082-1/1992

EN 60555 part 2 and 3 1987

Accredited testlaboratory:

MIKES PRODUCT SERVICE GmbH

Ohmstraße 2-4

94342 Strasskirchen

LG Electronics U.K. Ltd.

16. Mar. '95
place and date of issue

Mike.P.Burns (SVC MANAGER)
Manufacturer/Authorized representative
name and signature

Table of Contents

Introduction........................................................................................ 1

Monitor Registration.......................................................................... 2

Important Precautions....................................................................... 3

Installation......................................................................................... 5

Location and Function of Controls..................................................... 6

Control Panel Function...................................................................... 7

Power Management System.............................................................10

Image Adjustment .............................................................................10

Video Memory Modes........................................................................11

Low Radiation Compliance (MPR II).................................................13

Self Diagnostics.................................................................................13

DDC (Display Data Channel) ............................................................13

Troubleshooting Tips.........................................................................14

Service ..............................................................................................15

Specifications....................................................................................16

GoldStar Monitor Limited Warranty...................................................18

Introduction

Thank you for purchasing a GoldStar color monitor. This monitor
supports OSD, DDC1, DDC2B, DDC2AB. it will give you high
resolution performance and operation in a variety of video operating
modes. It is compatible with standard PC type personal computers.
The 17-inch flat Square Tube design (15.9 inches viewable) is
excellent for use in a windows or desktop publishing environment,
where smaller screen sizes result in images difficult to see easily. The
anti-glare treatment is easy on the eyes.
The microprocessor-based On Screen Display (OSD) controls allow
you to adjust a

variety of image controls, automatically storing up to

35
different video modes, including 7 recall modes.
For greater user health and safety, this monitor complies with the
Swedish Nutek MPR II requirements for low radiation emissions.
For low cost of monitor operation, this monitor is certified as meeting
the EPA Energy Star Requirements, and utilizes the VESA Display
Power Management Signalling (DPMS) protocol.
Please review this manual completely before operating the monitor.

1

Monitor Registration

The model and serial numbers are found on the rear of this unit.
These numbers are unique to this unit and not available to others.
You should record requested information here and retain this guide
as a permanent record of your purchase. Staple your receipt to this
page.

Date of Purchase :
Dealer Purchased From :
Dealer Address :
Dealer Phone No. :
Model No. :
Serial No. :

Notice

All rights reserved. Reproduction in any manner, in whole or in part, is
strictly prohibited without the written permission of LG Electronics Inc.

Trademark Acknowledgments
GoldStar is a trademark of LG Electronics Inc.

IBM is a registered trademark and VGA is a trademark of

International Business Machines Corporation.

WARNING : To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.

AVERTISSEMENT :

Ne pas placer cet appareil dans un endroit humide.

Cela peut entraîner un incendie ou une décharge électrique.

2

Important Precautions

This unit has been engineered and manufactured to assure your
personal safety, but improper use can result in potential electrical
shock or fire hazard. In order not to defeat the safeguards
incorporated in this monitor, observe the following basic rules for its
installation, use, and servicing. Also, follow all warnings and
instructions marked directly on your monitor.

On safety

1. Use only the power cord supplied with the unit. In case you need

another power cord, make sure that it is certified by the applicable
standards (UL/CSA or VDE) if not being provided by the supplier.

2. Operate the monitor only from a power source indicated in the

specifications of this manual or listed on the monitor. If you are not
sure what type of power supply you have in your home, consult
your dealer.

3. Overloaded AC outlets and extension cords are dangerous. So are

frayed power cords and broken plugs. They may result in a shock

or fire hazard. Call your service technician for replacement.

4. DO NOT OPEN THE MONITOR. There are no user-serviceable

components inside. There are Dangerous High Voltages inside,
even when the power is Off. Contact your dealer If the monitor is
not operating properly.

5. To avoid personal injury:

Do not place the monitor on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not try to roll a stand with small casters across thresholds or
deep pile carpets.

6. To prevent Fire or Hazards:

Always turn the monitor Off if you leave the room for more than a
short period of time. Never leave the monitor On when leaving the
house.

3

Keep children from dropping or pushing objects into the monitor's

cabinet openings. Some internal parts carry hazardous voltages.

Do not add accessories that have not been designed for this

monitor.

During a lightning storm or when the monitor is to be left unatten-

ded for an extended period of time, unplug it from the wall outlet.

Do not bring magnetic devices such as magnets or motors near

the picture tube.

On installation

1. Do not allow anything to rest upon or roll over the power cord.

Do not place the monitor where the power cord is subject to damage.

2. Do not use this monitor near water such as near a bathtub,

washbowl, kitchen sink, laundry tub, in a wet basement, or near a
swimming pool.

3. Monitors are provided with ventilation openings in the cabinet to

allow the release of heat generated during operation. If these
openings are blocked, built up heat can cause failures which may
result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the monitor on a
bed, sofa, rug, etc.
Place the monitor in a built-in enclosure unless proper ventilation
is provided.
Cover the openings with cloth or other material.

Place the monitor near or over a radiator or heat source.

On cleaning

Unplug the monitor before cleaning the face of the picture tube.

Use a slightly damp (not wet) cloth. Do not use an aerosol directly
on the picture tube because overspray may cause electrical
shock.

On repacking.

Do not throw away the carton and packing materials. They make

an ideal container in which to transport the unit. When shipping

the unit to another location, repack it in its original material.

4