LG SN09DLX, SN07DVX, SN05DVX, SN05DLX, SN07DLX Manual book

...

OWNER’S MANUAL

AIR CONDITIONER

Please read this manual carefully before operating your set and retain it for future reference.

HISGLNE

IANESOIND

TYPE : WALL MOUNTED

3.0

MODELS :

S05DVX

S09DVX S09DLX

S05DLX

S07DVX S12DLX

S07DLX S18DLX

*MFL67215106*

P/NO : MFL67215106

www.lge.com

TIPS FOR SAVING ENERGY

ENGLISH

TIPS FOR SAVING ENERGY

Here are some tips that will help you minimize the power consumption when you use the air conditioner. You can use your air conditioner more efficiently by referring to the instructions below:

• Do not cool excessively indoors. This may be harmful for your health and may consume more electricity.

• Block sunlight with blinds or curtains while you are operating the air conditioner.

• Keep doors or windows closed tightly while you are operating the air conditioner.

• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.

• Speed up the fan to cool or warm indoor air quickly, in a short period of time.

• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.

• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the air flow or weaken the cooling / dehumidifying functions.

For your records

Staple your receipt to this page in case you need it to prove the date of purchase or for warranty purposes. Write the model number and the serial number here:

Model number :

Serial number :

You can find them on a label on the side of each unit.

Dealer’s name :

Date of purchase :

SAFETY PRECAUTIONS

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product

WARNING

It can result in serious injury or death when the directions are ignored

CAUTION

It can result in minor injury or product damage when the directions are ignored

WARNING

• Installation or repairs made by unqualified persons can result in hazards to you and others.

• Installation MUST conform with local building codes.

• The information contained in the manual is intended for use by a qualified service technician familiar with safety procedures and equipped with the proper tools and test instruments.

• Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.

Installation

• Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.

• Contact an authorized service center when you install or relocate the air conditioner. Failure to do so may result in serious injury or product failure.

• Always use a power plug and socket with a ground terminal.Failure to do so may result in electric shock or product failure

• Install the panel and the cover of the control box safely. Failure to do so may result in explosion or fire.

• Install a dedicated electric outlet and circuit breaker before you use the air conditioner. Failure to do so may result in electric shock or product failure.

• Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.

• Do not modify or extend the power cable. If the power cable or cord has scratches or skin peeled off or deteriorated then it must be replaced. It may result in fire or electric shock.

• Be cautious when you unpack or install the air conditioner. Failure to do so may result in serious injury or product failure.

• Contact an authorized service center when you install or relocate the air conditioner. Failure to do so may result in serious injury or product failure.

• Do not install the air conditioner on an unstable surface or where there may be a danger of it falling. It may result in death, serious injury, or product failure.

ENGLISH

SAFETY PRECAUTIONS

ENGLISH

Operation

• Do not let the air conditioner run for a long time when the humidity is very high or when a door or window has been left open. Failure to do so may result in product failure.

• Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Failure to do so may result in fire, electric shock, or product failure.

• Do not place any objects on the power cord. It may result in electric shock or product failure.

• Do not turn on or off the air conditioner by plugging in or unplugging the power plug. It may result in fire or electric shock.

• Do not touch, operate or repair the air conditioner with wet hands. It may result in electric shock or product failure.

• Do not place a heater or other heating appliances near the power cable. It may result in fire, electric shock, or product failure.

• Do not allow water to run into the air conditioner. It may result in explosion or fire.

• Do not leave flammable substances such as gasoline, benzene and thinner near the air conditioner. It may result in explosion or fire.

• Do not use the air conditioner for an extended period of time in a small place without ventilation. Ventilate the place regularly. Failure to do so may result in explosion or fire.

• When there is a gas leak, ventilate sufficiently before using the air conditioner again. Failure to do so may result in explosion or fire.

• Unplug the power plug if there is a noise, smell or smoke coming from the air conditioner. Failure to do so may result in explosion or fire.

• Stop operating and close the window in strom or hurricane.If possible remove the product from the window before hurricane arrives

• Do not touch the electrostatic filter after opening the front grille. Failure to do so may result in electric shock or product failure.

• Contact an authorized service center when the air conditioner is submerged into water due to flooding. Failure to do so may result in explosion or fire.

• Be cautious water could not enter the product

• Make sure to ventilate sufficiently when this air conditioner and a heating appliance such as a heater are used simultaneously. Failure to do so may result in fire, serious injury, or product failure.

• Turn the main power off and unplug the power plug when you clean or repair the air conditioner. Failure to do so may result in death, serious injury, or product failure.

• Unplug the power plug when the air conditioner is not used for an extended period of time. Failure to do so may result in product failure.

• Do not place any objects on the air conditioner. It may result in product failure.

SAFETY PRECAUTIONS

CAUTION

Installation

• Make sure to check if there is a refrigerant leak after you install or repair the air conditioner. Failure to do so may result in product failure.

• Install the drain hose properly for smooth drainage of condensed water. Failure to do so may result in product failure.

• Keep level even when installing the product.

• Install the air conditioner where the noise from the outdoor unit or the exhaust gas will not inconvenience the neighbors. Failure to do so may result in conflict between neighbors.

• When transporting the equipment, there should be at least 2 or more people, or a forklift. It may result in serious injury.

• Do not install the air conditioner where it will be exposed to sea wind (salt spray) directly. It may result in product failure.

Operation

• Do not expose people, animals or plants to the cold or hot wind from the air conditioner. It may result in serious injury.

• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system. It may result in death, fire or electric shock.

• Do not block the inlet or outlet of air flow. It may result in explosion or product failure.

• Do not use strong cleaning agents or solvents when you clean the air conditioner, or spray water. Use a smooth cloth. It may result in serious injury or product failure.

• Never touch the metal parts of the air conditioner when you remove the air filter. It may result in serious injury or product failure.

• Do not place any objects on the air conditioner. It may result in product failure.

• Always insert the filter securely after cleaning. Clean the filter every two weeks or more often if necessary.

• Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operating. It may result in electric shock.

• Do not drink the water drained from the air conditioner. It may result in serious health complications.

• Use a sturdy stool or ladder when you clean, maintain or repair the air conditioner at a height. Failure to do so may result in serious injury or product failure.

• Do not mix the batteries for the remote control with other types of batteries or mix new batteries with used batteries. Failure to do so may result in product failure.

• Do not recharge or disassemble the batteries. Failure to do so may result in explosion, fire or serious injury.

• Stop using the remote control if there is a battery fluid leak. If your cloth or skin is exposed to the battery fluid from a leak, wash it off with clean water. Failure to do so may result in serious injury.

• If you swallow the battery fluid from a leak, wash out the inside of your mouth thoroughly and then consult a doctor. Failure to do so may result in serious health complications.

ENGLISH

TABLE OF CONTENTS

TIPS FOR SAVING ENERGY

3 IMPORTANT SAFETY

INSTRUCTIONS

7 BEFORE USE

7 Components

8 Using the remote control

9 - Inserting batteries

9 - Installing the remote control holder

10 BASIC FUNCTIONS

10 Cooling your room

10 Removing humidity

11 Airing your room

11 Adjusting the fan speed

11 Adjusting the air ﬂow direction

11 Setting the timer

11 - Setting the current time

12 - Turning on the air conditioner

automatically at a set time

12 - T

automatically at a set time

12 - Canceling the timer setting

12 - Setting sleep mode

13 ADVANCED FUNCTIONS

13 Changing room temperature quickly

13 Indoor air puriﬁcation

13 Plasmaster Auto Clean operation

13 Skin Care Mode

14 Plasma Puriﬁcation operation (Optional)

14 Auto operation (Optional)

15 Auto Changeover operation (Optional)

15 Energy saving cooling mode

15 Display screen brightn

16 Operating the air conditioner without the

remote control

16 Restarting the air conditioner

automatically

ess

17 MAINTENANCE

18 Cleaning the air ﬁlter

18 Cleaning the anti-allergy ﬁlter and triple

ﬁlter (Optional)

18 Cleaning the plasma ﬁlter (Optional)

19 TROUBLESHOOTING

19 Self-diagnosis function

19 Before requesting service

BEFORE USE

Components

Outdoor unit

NOTE

The number of operation lamps and their locations may vary, depending on the model of the

air conditioner.

BEFORE USE

HSILGNE

Indoor unit

* The feature can be changed according to type of model.

Front grille

Triple filter (Optional)

Air outlet

Vertical louver

Plasmaster Ionizer

Plasma filter (Optional)

Air filter

Horizontal vane

Allergy free filter (Optional)

Air inlet

Operation lamp

ON/OFF button

Signal Receiver

Air Inlet

Air Outlet

B ase Plate

Connecting Wires

Piping

Drain Hose

BEFORE USE

ENGLISH

LIS HNGE

Using the remote control

You can operate the air conditioner more conveniently with the

buttons for the additional functions under the cover of the remote control.

Wireless remote control

C F

OFF

SKIN

CARE

TEMP

SET

CLEAN PLASMA

MODE

JET

COOL

SAVING

C/ F [5SEC]

OFF

123

hr.

FAN

SPEED

SWING

TIMER

SLEEP

CLEAR

LIGHT TIME [3SEC] ROOM TEMP

Operation Mode

Cooling Operation

Artificial Intelligence or Auto changeover

Healthy Dehumidification Operation

Air Circulation

Display screen

Control panel

Control

panel

PLASMA

SLEEP

TEMP

FAN

SPEED

MODE

JET

COOL

SWING SWING

ROOM TEMP

OFF

A/CLEAN

SAVING

LIGHT

SKIN

CARE

SET

CLEAR

TIME [3SEC]

Display

screen

AM PM

Description

lasma button* : moving particles that enter the indoor unit.

leep mode auto button* : Sets the

sleep mode auto operation.

emperature adjus tment buttons : Ad-

justs the room temperature when cooling and heating.

On/Off button:

Indoor fan speed button: Adjusts the fan speed.

peration mode se lec tion button* : Selects the operation mode. Cooling operation ( ) / Auto operation or auto changeover ( ) / Dehumidifying operation ( )

et cooling/heating button* : Warms up

/ Air circulation

or cools down the indoor temperature within a short period of time.

ir flow direction button: Adjusts the air

Temperature display button: Displays the room temperature.

imer button: Sets the current time and

OFF

the start / end time.

unctions button* : Adjusts the time

F and sets the special functions.

: Auto clean / : Operates energy saving cooling / Adjusts the brightness of the indoor unit display

SKIN CARE : keeps skin moisturized.

et/clear button: Time sets and cancels

functions.

es et button: Initialize the air condi-

R tioner settings.

( )

* Some functions may not be supported, depending on the

model.

BEFORE USE

ENGLISH

Inserting batteries

Insert batteries before using the remote control. The battery type used is AAA (1.5 V).

1 Remove the battery cover.

2 Insert the new batteries and make sure

that the + and - terminals of the batteries are installed correctly.

3 Reattach the battery cover.

NOTE

If the display screen of the remote control starts to fade, replace the batteries.

2 Fix the holder by fastening the 2 screws

rmly with a screwdriver.

3 Slide the remote control into the holder.

Operating method

Point the remote control towards the signal receiver at the bottom of the air conditioner to operate it.

Installing the remote control holder

Install the holder where there is no direct sunlight to protect the remote control.

1 Choose a safe and easily-accessible place.

NOTE

• The remote control may operate other

electronic devices if pointed towards them. Make sure to point the remote control towards the signal receiver of the air conditioner.

• For proper operation, use a soft cloth to

clean the signal transmitter and receiver.

BASIC FUNCTIONS

ENGLISH

BASIC FUNCTIONS

Cooling your room

(Cooling operation)

1 Press to turn on the power. 2 Press repeatedly to select the cooling

3 Press or to set the desired tempera-

MODE

operation.

- is displayed on the display screen.

ture.

- The temperature range is 18°C (64.4°F)30°C (80°F).

Removing humidity

(Dehumidifying operation)

This mode removes excess moisture from an environment with high humidity or in the rainy season, in order to prevent mold from setting in. This mode adjusts the room temperature and the fan speed automatically to maintain the optimal level of humidity.

1 Press to turn on the power. 2 Press repeatedly to select the dehu-

MODE

midifying operation.

- is displayed on the display screen.

• In this mode you cannot adjust the room

NOTE

temperature, as it is adjusted automatically. Also, the room temperature is not displayed on the display screen.

BASIC FUNCTIONS

ENGLISH

Airing your room

(Air Circulation operation)

This mode only circulates the indoor air

without changing the room temperature. The

cooling lamp lights up in air circulation mode.

1 Press to turn on the power.

Press

air circulation operation.

- is displayed on the display screen.

3 Press to adjust the fan speed.

MODE

repeatedly to select

FAN

SPEED

Adjusting the fan speed

1 Press repeatedly to adjust the fan

FAN

SPEED

speed.

- Select if you want natural air. The fan speed adjusts automatically.

Adjusting the air ﬂow direction

cally,

SWING

tion automatically.

SWING

tally, press tion automatically.

NOTE

tally may not be supported, depending on the model.

cause product failure.

• If you restart the air conditioner, it starts

to operate with the previously set direc-

not match the icon displayed on the remote control. When this occurs, press

or to adjust the direction of the

SWING

Setting the timer

You can use the timer function to save energy

Setting the current time

SET

1 Press and hold it for longer than 3 sec-

CLEAR

onds.

the display screen.

ENGLISH

BASIC FUNCTIONS

2 Press or to select the times.

SET

3 Press

CLEAR

Turning on the air conditioner automatically at a set time

1 Press

2 Press or to select the times. 3 Press 4 When setting the timer, current time and

the display screen.

SET

CLEAR

ON icon are displayed on the display screen indicating that the desired time is set.

T tomatically at a set time

1 Press .

2 Press or to select the times. 3 Press 4 When setting the timer, current time and

OFF

the display screen.

SET

CLEAR

OFF icon are displayed on the display screen indicating that the desired time is set.

Canceling the timer setting

SET

Press .

CLEAR

- To cancel all timer settings, press .

SET

CLEAR

Setting sleep mode

tioner automatically when you go to sleep.

1 Press to turn on the power. 2 Press 3 Press or to select the hour

4 Press

SLEEP

(up to 7 hours).

SET

CLEAR

- is displayed on the display screen in sleep mode.

NOTE

In the Cooling and Dehumidifying modes, the temperature increases by 1°C(33.8°F) after 30 minutes and by a further 1°C(33.8°F) after another 30 minutes for a more comfortable sleep. The temperature increases with up to 2°C(35.6°F) from the preset temperature.

ADVANCED FUNCTIONS

ENGLISH

vanced functions.

Changing room temperature quickly

(Jet Cool)

This mode allows you to cool indoor air quickly in summer or warm it quickly in winter.

1 Press to turn on the power.

2 Press

- In jet cooling mode, strong air blows out

• Powerful Cooling

- C/O Model

• This function may not be supported, de-

pending on the model.

JET

COOL

at a temperature of 18°C (64.4°F)- 30°C

colling.

NOTE

Enable in Cooling/Dehumidifying/Fan/

Indoor air puriﬁcation

Plasmaster Auto Clean operation

In the cooling and dehumidifying operations, moisture is generated inside the indoor unit. Use the auto cleaning function to remove such moisture and bacteria.

1 Press

Skin Care Mode

Use the Skin Care mode to keeps skin moisturized.

1 Press to turn on the power.

2 Press to enter the Skin Care mode

- Nothing is going to change on the remote control

- This mode operates with high fan speed and setting

A/CLEAN

- is displayed on the display screen.

ates for 30 minutes and cleans the inside of the indoor unit.

NOTE

Both the plasma lamp and the cooling lamp light up while Auto Cleaning operation is in operation. Some buttons cannot be used while the auto cleaning function is in operation.

SKIN

CARE

display screen.

However, temperature is not changed.

- In this mode, you can change the setting temperature, fan speed and vane directions.

NOTE

- This function may not be supported, depending on the model.

- This function can be operated on Cooling mode, Fan Mode and Plasma mode

environment.

+ 29 hidden pages