LG SN07DLG-2, SN05DLG-2, SN09DLG-2 Manual book

OWNER’S MANUAL

AIR CONDITIONER

Please read this manual carefully before operating your set and retain it for future reference.

HISG LNE

TYPE : WALL MOUNTED

Skincare

MODELS :

S05DLG-2 S07DLG-2 S09DLG-2

*MFL67658910*

P/NO : MFL67658910

www.lg.com

ENGLISH

TIPS FOR SAVING ENERGY

Here are some tips that will help you minimize the power consumption when you use the air

below:

• Do not cool excessively indoors. This may be harmful for your health and may consume more electricity.

• Block sunlight with blinds or curtains while you are operating the air conditioner.

• Keep doors or windows closed tightly while you are operating the air conditioner.

y to circulate indoor air.

• Speed up the fan to cool or warm indoor air quickly, in a short period of time.

• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.

impurities collected in the

ng / dehumidifying functions.

For your records

Staple your receipt to this page in case you need it to prove the date of purchase or for warranty purposes. Write the model number and the serial number here:

Model number :

Serial number :

Dealer’s name :

Date of purchase :

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product

WARNING

It can result in serious injury or death when the directions are ignored

CAUTION

It can result in minor injury or product damage when the directions are ignored

WARNING

in hazards to you and others.

• Air conditioner Shall be installed in accordance with national wiring regulations.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

• The information contained in the manual is intended for use b

familiar with safety procedures and equipped with the proper tools and test instruments.

• Failure to carefully read and follow all instructions in this manual can result in equipment mal- function, property damage, personal injury and/or death.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• When the power cord is to be replaced, replacement work shall ve performed by authorized

personnel only using only genuine replacement parts.

ENGLISH

Installation

• Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Fail-

ure to do so may result in electric shock or product failure.

• Contact an authorized service center when you install or relocate the air conditioner. Failure to

do so may result in serious injury or product failure.

• Always use a power plug and socket with a ground terminal. Failure to do so may result in electric shock or product failure

• Install the panel and the cover of the control box safely. Failure to do so may result in explo-

• Install a dedicated electric outlet and circuit breaker before you use the air conditioner. Failure

to do so may result in electric shock or product failure.

• Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Fail-

ure to do so may result in electric shock or product failure.

• Do not modify or extend the power cable. If the power cable or cord has scratches or skin peeled oﬀ or deteriorated then it must be replaced. It may resu

• Be cautious when you unpack or install the air conditioner. Failure to do so may result in seri-

ous injury or product failure.

• Contact an authorized service center when you install or relocate the air conditioner. Failure to

do so may result in serious injury or product failure.

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

• Do not install the air conditioner on an unstable surface or where there may be a danger of it falling. It may result in death, serious injury, or product failure.

Operation

• Do not let the air conditioner run for a long time when the humidity is very high or when a door or window has been left open. Failure to do so may result in product failure.

• Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Fail-

• Do not place any objects on the power cord. It may result in electric shock or product failure.

• Do not turn on or oﬀ the air conditioner by plugging in or unplugging the power plug. It may result in

• Do not touch, operate or repair the air conditioner with wet hands. It may result in electric shock or product failure.

• Do not place a heater or other heating appliances near the po shock, or product failure.

• Do not allow water to run into the air conditioner. It may re

• Do not use the air conditioner for an extended period of time in a small place without ventilation. Ventilate the place regularly. Failure to do so may result in e

• When there is a gas leak, ventilate suﬃciently before using the air conditioner again. Failure to do so

• Unplug the power plug if there is a noise, smell or smoke coming from the air conditioner. Failure to

ure.

d thinner near the air conditioner.

• Stop operating and close the window in strom or hurricane. If possible remove the product from the window before hurricane arrives

tric shock or product failure.

• Contact an authorized service center when the air conditioner

• Be cautious water could not enter the product.

• Make sure to ventilate suﬃciently when this air conditioner and a heating appliance such as a heater

• Turn the main power oﬀ and unplug the power plug when you clean or repair the air conditioner. Failure to do so may result in death, serious injury, or product failure.

• Unplug the power plug when the air conditioner is not used for an extended period of time. Failure to do so may result in product failure.

• Do not place any objects on the air conditioner. It may result in product failure.

WARNING

• For inner cleaning, contact an Authorized Service Center or a dealer. Do not use harsh detergent that causes corrosion or damage on the unit. Harsh detergent ma or electronic shock.

grille. Failure to do so may result in elec-

rious injury, or product failure.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

Installation

• Make sure to check if there is a refrigerant leak after you install or repair the air conditioner. Failure to do so may result in product failure.

• Install the drain hose properly for smooth drainage of condensed water. Failure to do so may result in product failure.

• Keep level even when installing the product.

• Install the air conditioner where the noise from the outdoor unit or the exhaust gas will not incon-

• When transporting the equipment, there should be at least 2 or more people, or a forklift. It may result in serious injury.

• Do not install the air conditioner where it will be exposed to sea wind (salt spray) directly. It may result in product failure.

between neighbors.

Operation

• Do not expose people, animals or plants to the cold or hot wind from the air conditioner. It may result in serious injury.

• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system. It shock.

explosion or product failure.

• Do not use strong cleaning agents or solvents when you clean the air conditioner, or spray water. Use a smooth cloth. It may result in serious injury or product failure.

• Never touch the metal parts of the air conditioner when you r rious injury or product failure.

• Do not place any objects on the air conditioner. It may result in product failure.

necessary.

• Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operating. It may result in electric shock.

• Do not drink the water drained from the air conditioner. It may result in serious health complications.

• Use a sturdy stool or ladder when you clean, maintain or repair the air conditioner at a height. Failure to do so may result in serious injury or product failure.

• Do not mix the batteries for the remote control with other types of batteries or mix new batteries with used batteries. Failure to do so may result in product failure.

• Do not recharge or disassemble the batteries. Failure to do s injury.

consult a doctor. Failure to do so may result in serious health complications.

ter every two weeks or more often if

. If your cloth or skin is exposed to the

to do so may result in serious injury.

ide of your mouth thoroughly and then

ENGLISH

TABLE OF CONTENTS

2 TIPS FOR SAVING

ENERGY

3 IMPORTANT SAFETY

INSTRUCTIONS

7 BEFORE USE

7 Components

8 Using the remote control

9 - Inserting batteries

9 - Installing the remote control holder

10 BASIC FUNCTIONS

10 Cooling your room

10 Removing humidity

10 Airing your room

10 Adjusting the fan speed

11 Adjusting the air ﬂow direction

11 Setting the timer

11 - Setting the current time

11 - Turning on the air conditioner

11 - T

12 - Canceling the timer setting

12 - Setting sleep mode

automatically at a set time

to-

matically at a set time

12 ADVANCED FUNCTIONS

12 Changing room temperature quickly

13 Indoor air puriﬁcation

13 - Auto Clean operation

Skin Care operation

Plasma

Puriﬁcation operation

Auto operation

14 Energy saving cooling mode

14 Display sc

°C / °F conversion

15 Operating the air conditioner without

the remote control

15 Restarting the air conditioner automat-

ically

reen brightness

16 MAINTENANCE

17 Cleaning the triple lter(Optional)

18 TROUBLESHOOTING

18 Self-diagnosis function

18 Before requesting service

BEFORE USE

ENGLISH

Components

Air inlet

Indoor unit

Front grille

Air outlet

* The feature can be changed according a type of model.

NOTE

The number of operation lamps and their locations may vary, depending on the model of the

air conditioner.

Outdoor unit

Dual Protection Filter

Operation lamp

Signal Receiver

Horizontal vaneHorizontal vane

Vertical louver

ON/OFF button

Skincare Ionizer

Air inlet vents

Air outlet vents

B ase plate

* The feature can be changed according a type of model.

Coolant piping

Drain hose

Connection wire

ENGLISH

BEFORE USE

Using the remote control

buttons for the additional functions under the cover of the remote control.

Wireless remote control

Control

panel

Display screen

Control panel

A/CLEAN

* Some functions may not be supported, depending on the

model.

A/CLEAN

Display

screen

lasma button* :

P moving particles that enter the indoor unit.

Energy saving button :

energy saving cooling

Skin Care button

n/Off button:

emperature adjus tment buttons: Adjusts the room temperature when cooling.

Operation mode selection button* : Selects the operation mode. Cooling operation ( ) / Auto operation ( ) / Dehumidifying operation ( ) /

et cooling button : indoor temperature within a short period of time.

Indoor fan speed button: Adjusts the fan speed.

Air flow direction button: Adjusts the air

Light button :

of the indoor unit display

Temperature display button: Displays the room temperature and also changes unit from

leep mode auto button : Sets the

S sleep mode auto operation.

Timer button: Sets the current time and the start / end time.

Auto clean button :

and clean inside of the indoor unit when

et/clear button: Sets or cancels func-

S tions.

es et button: Initialize the air condi-

tioner settings.

Description

Operates

: keeps skin moisturized.

Air circulation

( )

Cools down the

horizontally.

Adjusts the brightness

C to oF if pressed for 5 seconds.

Remove moisture

BEFORE USE

ENGLISH

Inserting batteries

Insert batteries before using the remote control. The battery type used is AAA (1.5 V).

1 Remove the battery cover.

2 Insert the new batteries and make sure

that the + and - terminals of the batteries are installed correctly.

3 Reattach the battery cover.

NOTE

If the display screen of the remote control starts to fade, replace the batteries.

2 Fix the holder by fastening the 2 screws

3 Slide the remote control into the holder.

Operating method

Point the remote control towards the signal receiver at the bottom of the air conditioner to operate it.

Installing the remote control holder

Install the holder where there is no direct sunlight to protect the remote control.

1 Choose a safe and easily-accessible place.

NOTE

• The remote control may operate other

electronic devices if pointed towards them. Make sure to point the remote control towards the signal receiver of the air conditioner.

• For proper operation, use a soft cloth to

clean the signal transmitter and receiver.

ENGLISH

BASIC FUNCTIONS

Cooling your room

(Cool ing operation)

1 Press to turn on the power. 2 Press repeatedly to select the cooling

operation.

- is displayed on the display screen.

3 Press or to set the desired tempera-

ture.

- The temperature range is 18°C (64°F) ~ 30°C (86°F).

Removing humidity

(Dehumidifying operation)

This mode removes excess moisture from an environment with high humidity or in the rainy season, in order to prevent mold from setting in. This mode adjusts the room temperature and the fan speed automatically to maintain the optimal level of humidity.

1 Press to turn on the power. 2 Press repeatedly to select the dehu-

midifying operation.

- is displayed on the display screen.

Airing your room

(Air Circulation operation)

This mode only circulates the indoor air

without changing the room temperature.

1 Press to turn on the power. 2 Press repeatedly to select the air circu-

lation operation.

- is displayed on the display screen.

3 Press to adjust the fan speed.

Adjusting the fan speed

1 Press repeatedly to adjust the fan

speed.

- Select if you want natural air. The fan speed adjusts automatically.

Remark Speed

High

NOTE

• In this mode you cannot adjust the desired temperature, as it is adjusted automatically. Also, the desired temperature is not displayed on the display screen.

Medium

Low

Natural Wind

BASIC FUNCTIONS

ENGLISH

Adjusting the air ﬂow direction

zontally, press repeatedly and select the desired direction.

- Select to adjust the direction of the air

NOTE

may not be supported, depending on the model.

cause product failure.

• If you restart the air conditioner, it starts

to operate with the previously set direc-

not match the icon displayed on the remote control. When this occurs, press

again.

vertically

Setting the timer

You can use the timer function to save energy

2 Press or to select the minutes. 3 Press

Turning on the air conditioner automatically at a set time

1 Press .

the display screen.

2 Press or to select the minutes. 3 Press 4 When setting the timer, current time and

ON icon are displayed on the display screen indicating that the desired time is set.

T tomatically at a set time

1 Press .

the display screen.

Setting the current time

1 Press and hold it for longer than 3 sec-

onds.

the display screen.

2 Press or to select the minutes. 3 Press 4 When setting the timer, current time and

OFF icon are displayed on the display screen indicating that the desired time is set.

ENGLISH

ADVANCED FUNCTIONS

Canceling the timer setting

1 Press .

- To cancel all timer settings, press .

Setting sleep mode

tioner automatically when you go to sleep.

1 Press to turn on the power. 2 Press 3 Press or to select the hour

(up to 7 hours).

4 Press

- is displayed on the display screen in sleep mode.

NOTE

In the Cooling and Dehumidifying modes, the temperature increases by 1°C after 30 minutes and by a further 1°C after another 30 minutes for a more comfortable sleep. The temperature increases with up to 2°C from the preset temperature.

ADVANCED FUNCTIONS

vanced functions.

Changing room temperature quickly

(Jet Cool operation)

This mode allows you to cool indoor air quickly in summer .

1 Press to turn on the power. 2 Press .

- In jet cooling mode, strong air blows out at a temperature of 18°C (64°F) for 30 minutes.

NOTE

• Powerful Cooling

- C/O Model Enable in Cooling/Dehumidifying/Fan/

• This function may not be supported, de-

pending on the model.

+ 28 hidden pages