LG Shine User Manual

Page 1

Page 2

LIMITED WARRANTY STATEMENT

1. WHAT THIS WARRANTY COVERS :

LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship, according to the following terms and conditions:

1. The limited warranty for the product extends for TWELVE (12) MONTHS beginning on the date of purchase of the product with valid proof of purchase, or absent valid proof of purchase, FIFTEEN (15) MONTHS from date of manufacture as determined by the unit’s manufacture date code.

2. The limited warranty extends only to the original purchaser of the product and is not assignable or transferable to any subsequent purchaser/end user.

3. This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S, including Alaska, Hawaii, U.S. Territories and Canada.

4. The external housing and cosmetic parts shall be free of defects at the time of shipment and, therefore, shall not be covered under these limited warranty terms.

5. Upon request from LG, the consumer must provide information to reasonably prove the date of purchase.

6. The customer shall bear the cost of shipping the product to the Customer Service Department of LG. LG shall bear the cost of shipping the product back to the consumer after the completion of service under this limited warranty.

2. WHAT THIS WARRANTY DOES NOT COVER :

1. Defects or damages resulting from use of

the product in other than its normal and customary manner.

2. Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of LG, including damage caused by shipping, blown fuses, spills of food or liquid.

3. Breakage or damage to antennas unless caused directly by defects in material or workmanship.

4. That the Customer Service Department at LG was not notified by consumer of the alleged defect or malfunction of the product during the applicable limited warranty period.

5. Products which have had the serial number removed or made illegible.

6. This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any implied warranty of marketability or fitness for a particular use.

7. Damage resulting from use of non-LG approved accessories.

Page 3

8. All plastic surfaces and all other externally exposed parts that are scratched or damaged due to normal customer use.

9. Products operated outside published maximum ratings.

10. Products used or obtained in a rental

program.

11. Consumables (such as fuses).

3. WHAT LG WILL DO:

LG will, at its sole option, either repair, replace or refund the purchase price of any unit that does not conform to this limited warranty. LG may choose at its option to use functionally equivalent reconditioned, refurbished or new units or parts or any units. In addition, LG will not re-install or back-up any data, applications or software that you have added to your phone. It is therefore recommended that you back-up any such data or information prior to sending the unit to LG to avoid the permanent loss of such information.

4. STATE LAW RIGHTS :

No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR INABILITY TO USE, THIS

PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY APPLICABLE TO THIS PRODUCT.

Some states do not allow the exclusive of limitation of incidental or consequential damages or limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

5. HOW TO GET WARRANTY SERVICE :

To obtain warranty service, please call or fax to the following telephone numbers from anywhere in the continental United States:

Tel. 1-800-793-8896 or Fax. 1-800-448-4026 Or visit www.lgeservice.com.

Correspondence may also be mailed to: LG Electronics MobileComm U.S.A., Inc. 201 James Record Road Huntsville, AL

35824 DO NOT RETURN YOUR PRODUCT TO THE

ABOVE ADDRESS. Please call or write for the

location of the LG authorized service center nearest you and for the procedures for obtaining warranty claims.

Page 4

User Guide

Page 5

Table of Contents

For Your Safety . . . . . . . . . . . . . . . . . . . . . . . 5

Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . 10

Phone Components . . . . . . . . . . . . . . . . . . . . . . . . 10

Your Phone’s Features . . . . . . . . . . . . . . . . . . . . . . 11

Display Information . . . . . . . . . . . . . . . . . . . . . . . . 13

Getting Started . . . . . . . . . . . . . . . . . . . . . . 16

Installing the SmartChip . . . . . . . . . . . . . . . . . . . . 16

Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . 17

Memory card slot . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Inserting the memory card . . . . . . . . . . . . . . . . . . 18

Removing the memory card . . . . . . . . . . . . . . . . . 18

Turning Your Phone On and Off . . . . . . . . . . . . . . 19

Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Barring Password . . . . . . . . . . . . . . . . . . . . . . . . . 19

General Functions . . . . . . . . . . . . . . . . . . . 20

Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Making a Call by Send Key . . . . . . . . . . . . . . . . . . . . 20

Making International Calls . . . . . . . . . . . . . . . . . . . . 20

Ending a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Making a Call From the Contacts . . . . . . . . . . . . . . . 20

Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . 21

Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Vibrate Mode (Quick) . . . . . . . . . . . . . . . . . . . . . . . . . 21

Signal Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Selecting Functions and Options . . . . . .25

In-Call Menu . . . . . . . . . . . . . . . . . . . . . . . .26

During a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Making a Second Call . . . . . . . . . . . . . . . . . . . . . . . . 26

Swapping Between Two Calls . . . . . . . . . . . . . . . . . . 26

Answering an Incoming Call . . . . . . . . . . . . . . . . . . . 26

Rejecting an Incoming Call . . . . . . . . . . . . . . . . . . . . 26

Muting the Microphone . . . . . . . . . . . . . . . . . . . . . . . 26

Using the Speakerphone . . . . . . . . . . . . . . . . . . . . . . 27

Video Share Calling . . . . . . . . . . . . . . . . . . . . . . . .27

Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Making a Second Call . . . . . . . . . . . . . . . . . . . . . . . . 30

Setting Up a Conference Call . . . . . . . . . . . . . . . . . . 31

Activate the Conference Call on Hold . . . . . . . . . . . . 31

Adding Calls to the Conference Call . . . . . . . . . . . . . 31

Private Call in a Conference Call . . . . . . . . . . . . . . . .31

Ending a Conference Call . . . . . . . . . . . . . . . . . . . . . . 31

Menu Tree . . . . . . . . . . . . . . . . . . . . . . . . . .32

Cellular Video . . . . . . . . . . . . . . . . . . . . . . . 36

Messaging . . . . . . . . . . . . . . . . . . . . . . . . . .37

New Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

IM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Mobile Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Drafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Outbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Sent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Page 6

Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Text Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Multimedia Templates . . . . . . . . . . . . . . . . . . . . . . . . 46

Signature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . .47

Text Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Multimedia Message . . . . . . . . . . . . . . . . . . . . . . . . . 47

Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Service Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . .49

Missed Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Dialed Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Received Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

All Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Call Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Data Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

MEdia Net . . . . . . . . . . . . . . . . . . . . . . . . . . .51

MEdia Net Home . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Saved Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Enter URL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Recent Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Browser Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Primary Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Cache Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Cookie Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Character Encoding . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Scrolling Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Show Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

AuthWallet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

AT&T Mall . . . . . . . . . . . . . . . . . . . . . . . . . .55

Shop Ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Shop Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Shop Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Shop Multimedia . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Shop Applications . . . . . . . . . . . . . . . . . . . . . . . . . 55

Shop Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

MEdia Net Home . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

AT&T Music . . . . . . . . . . . . . . . . . . . . . . . . 56

Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Shop Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

MusicID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

XM Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Music Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

The Buzz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Music Apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

My Stuff . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Page 7

Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Audio & Ringtones . . . . . . . . . . . . . . . . . . . . . . . . . 64

Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Voice Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Notepad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Unit Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Date Finder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

D-Day Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Camera & Recordings . . . . . . . . . . . . . . . . . . . . . . .70

Take Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Record Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Record Voice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Other Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Address Book . . . . . . . . . . . . . . . . . . . . . . .74

Contact List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

New Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Caller Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Speed Dial List . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Copy All Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Delete All Contacts . . . . . . . . . . . . . . . . . . . . . . . . 75

Service Dial Numbers . . . . . . . . . . . . . . . . . . . . . . 75

My Business Card . . . . . . . . . . . . . . . . . . . . . . . . . 75

View Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

My Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

Audio & Ringtones . . . . . . . . . . . . . . . . . . . . . . . . . 76

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Date & Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Flight Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Check Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Handset Information . . . . . . . . . . . . . . . . . . . . . . . 86

Reset Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Q&A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Accessories . . . . . . . . . . . . . . . . . . . . . . . . .89

Safety Guidelines . . . . . . . . . . . . . . . . . . . 91

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Page 8

For Your Safety

Important Information

This user guide contains important information on the use and operation of this phone. Please read all the information carefully for optimal performance and to prevent any damage to or misuse of the phone. Any changes or modifications not expressly approved in this user guide could void your warranty for this equipment.

Before You Start

Safety Instructions

WARNING! To reduce the possibility of

electric shock, do not expose your phone to high humidity areas, such as the bathroom, swimming pool, etc.

Always store your phone away from heat.

Never store your phone in settings that may expose it to temperatures less than 32°F or greater than 104°F, such as outside during extreme weather conditions or in your car on a hot day. Exposure to excessive cold or heat will result in malfunction, damage and/or catastrophic failure.

Be careful when using your phone near other electronic devices. RF emissions from

your mobile phone may affect nearby in adequately shielded electronic equipment. You should consult with manufacturers of any personal medical devices such as pacemakers and hearing aides to determine if they are susceptible to interference from your mobile phone. Turn off your phone in a medical facility or at a gas station. Never place your phone in a microwave oven as this will cause the battery to explode.

IMPORTANT! Please read the TIA SAFETY INFORMATION on page 91 before using your phone.

Safety Information

Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user guide.

] Never use an unapproved battery since this

could damage the phone and/or battery and could cause the battery to explode.

] Never place your phone in a microwave oven

as it will cause the battery to explode.

] Do not dispose of your battery by fire or with

hazardous or flammable materials.

Page 9

For Your Safety

] Make sure that no sharp-edged items come

into contact with the battery. There is a risk of this causing a fire.

] Store the battery in a place out of reach of

children.

] Be careful that children do not swallow any

parts such as rubber plugs (earphone, connection parts of the phone, etc.). This could cause asphyxiation or suffocation.

] Unplug the power cord and charger during

lightning storms to avoid electric shock or fire.

] When riding in a car, do not leave your

phone or set up the hands-free kit near to the air bag. If wireless equipment is improperly installed and the air bag is activated, you may be seriously injured.

] Do not use a hand-held phone while driving.

] Do not use the phone in areas where its use

is prohibited. (For example: aircraft).

] Do not expose the battery charger or adapter

to direct sunlight or use it in places with high humidity, such as a bathroom.

] Never store your phone in temperatures less

than- 4°F or greater than 122°F.

] Do not use harsh chemicals(such as alcohol,

benzene, thinners, etc.) or detergents to clean your phone. There is a risk of this causing a fire.

] Do not drop, strike, or shake your phone

severely. Such actions may harm the internal circuit boards of the phone.

] Do not use your phone in high explosive

areas as the phone may generate sparks.

] Do not damage the power cord by bending,

twisting, pulling, or heating. Do not use the plug if it is loose as it may cause a fire or electric shock.

] Do not place any heavy items on the power

cord. Do not allow the power cord to be crimped as it may cause fire or electric shock.

] Do not handle the phone with wet hands

while it is being charged. It may cause an electric shock or seriously damage your phone.

] Do not disassemble the phone.

] Do not place or answer calls while charging

the phone as it may short-circuit the phone and/or cause electric shock or fire.

Page 10

For Your Safety

] Only use the batteries, antennas, and

chargers provided by LG. The warranty will not be applied to products provided by other suppliers.

] Only authorized personnel should service the

phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty.

] Do not hold or let the antenna come in

contact with your body during a call.

] An emergency call can be made only within

a service area. For an emergency call, make sure that you are within a service area and that the phone is turned on.

] Use accessories, such as earphones and

headsets, with caution. Ensure that cables are tucked away safely and do not touch the antenna unnecessarily.

Memory card information and care

] Always insert/ remove the memory card

while the handset power is off. If you remove it while the power is on, it may be damaged.

] If the damage cannot be fixed, format the

memory card.

] The memory card cannot be used for

recording copyright- protected data.

] Do not write forcefully on the memo area.

] Carry and store the memory card in its case.

] Do not allow the memory card to get wet.

] Do not leave the memory card in extremely

hot location.

] Do not disassemble or modify the memory

card.

FCC RF Exposure Information

WARNING! Read this information before

operating the phone.

In August 1996, the Federal Communications Commission (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.

The design of this phone complies with the FCC guidelines and these international standards.

Page 11

For Your Safety

CAUTION

Use only the supplied and approved antenna. Use of unauthorized antennas or modifications could impair call quality, damage the phone, void your warranty and/or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with skin, a minor burn may result. Contact your local dealer for a replacement antenna.

Body-worn Operation

This device was tested for typical body-worn operations with the back of the phone kept 0.6 inches (1.5cm) between the user’s body and the back of the phone. To comply with FCC RF exposure requirements, a minimum separation distance of 0.6 inches(1.5cm) must be maintained between the user s body and the back of the phone. Third-party belt-clips, holsters, and similar accessories containing metallic components should not be used. Bodyworn accessories that cannot maintain 0.6 inches(1.5cm) separation distance between the user's body and the back of the phone, and have not been tested for typical body-worn operations may not comply with FCC RF exposure limits and should be avoided.

Vehicle Mounted External Antenna (optional, if available)

A minimum separation distance of 8 inches (20cm) must be maintained between the user/bystander and the vehicle mounted external antenna to satisfy FCC RF exposure requirements. For more information about RF exposure, visit the FCC website at www.fcc.gov

FCC Part 15 Class B Compliance

This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that may cause undesired operation.

Cautions for Battery

] Do not disassemble.

] Do not short-circuit.

] Do not expose to high temperature: 60°C

(140°F).]

] Do not incinerate.

Page 12

For Your Safety

Battery Disposal

] Please dispose of your battery properly or

bring to your local wireless carrier for recycling.

] Do not dispose in fire or with hazardous or

flammable materials.

Adapter (Charger) Cautions

] Using the wrong battery charger could

damage your phone and void your warranty.

] The adapter or battery charger is intended

for indoor use only.

Do not expose the adapter or battery charger to direct sunlight or use it in places with high humidity, such as the bathroom.

Avoid damage to your hearing

] Damage to your hearing can occur if you are

exposed to loud sound for long periods of time. We therefore recommend that you do not turn on or off the handset close to your ear. We also recommend that music and call volumes are set to a reasonable level.

] If you are listening to music whilst out and

about, please ensure that the volume is at a reasonable level so that you are aware of your surroundings. This is particularly imperative when attempting to cross the street.

Page 13

Your Phone

Phone Components

1. Earpiece

2. Left soft key

5. Display screen

6. 5-way joystick or Navigation key

• • •• ••

7. Right soft key

4. Alpha numeric keys

3. Send key

8. Side keys

9. End /Power key

10. Multi-task key

11. Camera key

12. Clear key

13. Microphone

Page 14

Your Phone

Your Phone’s Features

1. Earpiece 2,7. Left soft key/Right soft key: Each of

these keys perform the functions indicated by the text on the display immediately above them.

3. Send key: You can dial a phone number and

answer incoming calls. Press this key in standby mode to quickly access the most recent incoming, outgoing and missed calls.

4. Alpha numeric keys: These keys are used

to dial a number in standby mode and to enter number or characters in edit mode.

5. Display screen: Displays phone status

icons, menu items, web information, pictures and more in full color.

6. 5-way joystick or Navigation key:

Enables scrolling through names, phone numbers, menus or settings. The 5-way joystick is also used to move the cursor up and down, right and left when writing text, using the calendar, and in some game applications. Pressing the joystick briefly selects the function. Short press will launch the WAP browser. Allows you to select and confirm menu options.

8. Side keys: These keys are used to control

the volume of ringtone in standby mode and speaker volume during a call.

9. End/Power key: Allows you to power the

phone on or off, end calls, or return to Standby Mode.

10. Multi-task key: Multitask simultaneously

with voice and data - browse the web, make calls, play games, send and receive messages, and listen to MP3s. All at once.

11. Camera key: Press this key to use the

camera feature or to go directly to camera mode.

12. Clear key: Allows you to delete the

characters entered or return you to the previous screen.

13. Microphone: Can be muted during a call

for privacy.

Page 15

Your Phone

• • •• ••

Front view

Rear view

Earpiece

Half Mirror

5-way joystick or Navigation key

Right soft key Left soft key

Camera Battery release latch

USIM card socket Battery terminals

Antenna

Side view

Side key

Multi-task key Camera key

Press this key to use the camera feature or to go directly to camera mode.

Advice to the customer

In order to allow better antenna sensitivity LG suggests that you hold the handset as depicted in the figure below.

please do not cover the antenna area with your hand during a call and using a bluetooth connection. It may degrade speech quality.

Page 16

Display Information

Icon area

Text and graphic area

Soft key indications

Area Description

First line Displays various icons.

Display messages, instructions

Middle

and any information that you

lines

enter, such as number to be dialed.

Shows the functions currently

Last line

assigned to the two soft keys.

Your Phone

Page 17

Your Phone

On-Screen Icons

The table below describes various display indicators or icons that appear on the phone’s display screen.

Icon

Description

Indicates the strength of the 3G network signal.

Indicates the strength of the network signal.

Indicates that GPRS service is available.Indicates that the EDGE service is available. Connection to the EDGE service allows you to transfer data at a speed of 200Kb/s(depending on network availability). Check with your operator for network coverage and service availability.

Indicates that GPRS service is available.

Indicates that Flight mode has been activated.

Indicates the status of the battery charge.

Icon Description

Indicates that a call is in progress.

Indicates that the alarm has been set and is on.

Indicates the Schedule function.

Indicates the receipt of a message.

Indicates the receipt of a Voicemail.

Indicates that Ring has been set for alert.

Indicates that Ring and vibration has been set for alert.

Indicates that Silent has been set for alert.

Indicates that the speakerphone has been activated.

Indicates that the Bluetooth®function has been activated.

Indicates that the data is being transmitted using a Bluetooth connection.

* The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such

marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners. Bluetooth QD ID B013285

Page 18

Icon Description

Indicates that the connection to a hands-free with Bluetooth has been activated.

Indicates that the connection to a stereo Bluetooth device has been activated.

Indicates that the connection to a hand-free & stereo with Bluetooth has been activated.

Indicates that the Multitasking function has been activated.

Indicates that the TTY has been set and is on.

Indicates that the phone is accessing the WAP or data service.

Your Phone

Page 19

Getting Started

Installing the SmartChip

When you subscribe to a cellular network, you are provided with a plug-in SmartChip loaded with your subscription details, such as your PIN, any optional services available and many others.

n Important!

The plug-in SmartChip and its contacts can be easily damaged by scratches or bending, so be careful when handling, inserting or removing the card. Keep all SmartChips out of the reach of small children.

1. If necessary, switch off the phone by

holding down the [END] key until the power-off image appears.

2. Remove the battery. To do so:

3. Slide the SmartChip into the SmartChip

socket so that it locks the card into place. Make sure that the notched corner is at the top left and the gold contacts of the card face into the phone.

n Note

When you need to remove the SmartChip, slide it, as shown, and take it out of the socket.

4. Insert the the battery into the battery

compartment as metal contacts meet in the middle of the phone. Push down the top of the battery until it snaps into place. Place the battery cover to the phone as shown.

Page 20

Getting Started

Charging the Battery

Use of unauthorized accessories could damage your phone and void your warranty.

To use the travel charger provided with your phone:

1. With the battery in position in the phone,

connect the lead from the travel charger to the bottom of the phone. Check that the arrow on the lead connector is facing towards the front of the phone.

2. Connect the travel charger to a standard AC

wall outlet. Only use the travel charger that comes with the package.

n Warning

The travel charger must be unplugged before you remove the battery, otherwise, the phone could be damaged.

3. When a phone has been charged fully,

disconnect the travel charger from the phone by pulling the connector out.

n Note

] If your phone is powered on while charging,

you’ll see the bars on the battery indicator icon cycle. When the battery is fully charged, the bars on the battery indicator icon will flash on and off.

If the battery fails to charge completely:

] After turning the phone on and off, please

attempt to recharge the battery.

] After detaching and reattaching the battery,

please attempt to recharge the battery.

Page 21

Getting Started

Memory card slot

The supports the microSD memory card. The memory card can be inserted into the side of the device. You can use this card to save data files such as MP3 songs.

n Note

Only use memory cards that have been approved by the manufacturer. Some memory cards might not be compliant with the handset.

Inserting the memory card

Insert the memory card into the slot until the memory card is fully inserted into the slot, as shown in the figure below:

n Note

The gold connectors must be face down and inserted first into the memory card slot.

Removing the memory card

1. Push the memory card down into the slot

with the tip of your finger.

2. Carefully pull the memory card out of slot.

Page 22

Getting Started

Turning Your Phone On and Off

1. Hold down the [END] key until the

phone switches on.

2. If the phone asks for a PIN, enter the PIN

and press the key.

The phone searches for your network and after finding it goes to the idle screen as illustrated below. From the idle screen, you can make or receive a call.

n Note

The display language is preset to Automatic at the factory. To change the language, use the Languages menu option (Menu 9.2.6).

3. When you wish to switch the phone off,

hold down the [END] key until the power-off image displays.

Access Codes

You can use the access codes described in this section to avoid unauthorized use of your phone. The access codes can be changed by using the Change Codes feature (Menu

9.6.5).

Security code (4 digits)

The security code protects the unauthorized use of your phone. The default security code is set to ‘0000’ and the security code is required to delete all phone entries and to activate the Restore Factory Settings menu. The security code default setting can be modified from the Security Settings menu.

Barring Password

The barring password function is required when you use the Call Barring function.

The password is obtained from the service provider when you subscribe to this function.

Page 23

General Functions

Making a Call

1. Make sure your phone is powered on.

2. Enter a phone number including the area

code. To edit a number on the display screen, simply press the key to erase one digit at a time.

] Press and hold the key to erase the

entire number.

3. Press the [SEND] key to call the

number.

4. When finished, press the [END] key.

Making a Call by Send Key

1. Press the [SEND] key, and the most

recent incoming, outgoing and missed phone numbers will be displayed.

2. Select the desired number by using the

navigation key.

3. Press the [SEND] key.

Making International Calls

1. Press and hold the key and the

international access character ‘+’ will appear.

2. Enter the country code, area code, and the

phone number.

3. Press the [SEND] key.

Ending a Call

When you have finished a call, press the [END] key.

Making a Call From the Contacts

You can store names and phone numbers dialed frequently in the SmartChip as well as in the phone memory known as the Contacts.

You can dial a number by simply selecting a name in the contacts and pressing the [SEND] key.

Page 24

General Functions

Adjusting the Volume

During a call, if you want to adjust the earpiece volume, use the side keys of the phone.

In idle mode, you can adjust the ring volume using the side keys.

Answering a Call

When you receive a call, the phone rings and the flashing phone icon appears on the screen. If the caller can be identified, the caller’s phone number (or name if stored in your Address Book) is displayed.

1. Open the Slide and press the [SEND]

key or the left soft key to answer an incoming call. If Any Key has been set as the answer mode (Menu 9.5.4), any key press will answer a call except for the [END] key or the right soft key.

n Note

] To reject an incoming call, press and hold the

side keys on the left side of the phone.

] If Slide Open has been set as the Answer

Mode (Menu 9.5.4), you do not need to press any key. You can answer the call simply by opening the slide.

2. End the call by closing the phone or

pressing the [END] key.

n Notice

You can answer a call while using the Address Book or other menu features.

Vibrate Mode (Quick)

Vibrate Mode can be activated by pressing and holding down the [Star] key.

Signal Strength

If you are inside a building, being near a window may give you better reception. You can see the strength of your signal by the signal indicator on your phone’s display screen.

Entering Text

You can enter alphanumeric characters by using the phone’s keypad. For example, storing names in the Address Book, writing a message, or creating scheduling events in the calendar all require entering text.

The following text input methods are available on the phone.

Page 25

General Functions

T9 Mode

This mode allows you to enter words with only one keystroke per letter. Each key on the keypad has more than one letter. The T9 mode automatically compares your keystrokes with an internal linguistic dictionary to determine the correct word, thus requiring far fewer keystrokes than the traditional ABC mode.

ABC Mode

This mode allows you to enter letters by pressing the key labeled with the required letter once, twice, three or four times until the letter is displayed.

123 Mode (Numbers Mode)

Type numbers using one keystroke per number. To change to 123 mode in a text entry field, press key until 123 mode is displayed.

A long press changes the mode to 123.

Symbolic Mode

This mode allows you to enter special characters.

n Note

You can select a different T9 language from the menu option. The default setting on the phone is T9 disabled mode.

Changing the Text Input Mode

Change the text input mode by pressing . You can check the current text input mode in the upper right corner of the screen.

Using the T9 Mode

The T9 predictive text input mode allows you to enter words easily with a minimum number of key presses. As you press each key, the phone begins to display the characters that it thinks you are typing based on a built-in dictionary. As new letters are added, the word changes to reflect the most likely candidate from the dictionary.

1. When you are in the T9 predictive text input

mode, start entering a word by pressing keys to . Press one key per letter.

] The word changes as letters are typed -

ignore what’s on the screen until the word is typed completely.

] If the word is still incorrect after typing

completely, press the [Star] key once or more to cycle through the other word options.

] If the desired word is missing from the

word choices list, add it by using the ABC mode.

Page 26

General Functions

2. Enter the whole word before editing or

deleting any keystrokes.

3. Complete each word with a space by

pressing the key or the right navigation key.

To delete letters, press . Press and hold down to erase the letters continuously.

n Notice

To exit the text input mode without saving your input, press the [END] key.

Using the ABC Mode

Use the keypad keys to enter your text.

1. Press the key labeled with the required

letter:

] Once for the first letter

] Twice for the second letter

] And so on

2. To insert a space, press the key once.

To delete letters, press the key. Press and hold down the key to erase the letters continuously.

n Note

Refer to the table below for more information on the characters available using the keys.

Characters in the Order Display

Key

Upper Case Lower Case

1 . , ' @ ? ! - : / 1 . , ' @ ? ! - : / 1

2 A B C 2 a b c 2

3 D E F 3 d e f 3

4 G H I 4 g h i 4

5 J K L 5 j k l 5

6 M N O 6 m n o 6

7 P Q R S 7 p q r s 7

8 T U V 8 t u v 8

9 W X Y Z 9 w x y z 9

Space Key,

0 (Long press)

Space Key,

0 (Long press)

Using the 123 (Numbers) Mode

The 123 Mode enables you to enter numbers in a text message (a telephone number, for example) more quickly.

Press the keys corresponding to the required digits before manually switching back to the appropriate text entry mode.

Page 27

General Functions

Using the Symbol Mode

The Symbol Mode enables you to enter various symbols or special characters.

To enter a symbol, press the [Star] key. Use the navigation keys to select the desired symbol and press the [OK] key.

T9 dictionary

The T9 dictionary is a feature that allows the user to add any unique or personal words to the T9 standard language database. The T9 dictionary function can be selected from the Text Entry Settings sub menu under the Options soft key menu. Within the T9 dictionary function, the user can add, modify, delete or reset personal words.

Page 28

Selecting Functions and Options

Your phone offers a set of functions that allow you to customize the phone. These functions are arranged in menus and sub-menus, accessed via the two soft keys marked the left soft key and the right soft key. Each menu and sub-menu allows you to view and alter the settings of a particular function.

Soft key functions vary depending on the mode of the phone. The label on the bottom of the display screen immediately above the soft keys indicates the current function.

Press the left soft key to

access the available Menu.

A long press will launch the WAP browser. A

short press allows you to select and confirm

Press the right soft key to access the available Options.

menu options.

Page 29

In-Call Menu

Your phone provides a number of control functions that you can use during a call. To access these functions during a call, press the right soft key [Options].

During a Call

The menu displayed on the handset screen during a call is different from the default main menu displayed when in idle screen, and the options are described below.

Making a Second Call

You can select a number you wish to dial from the Address Book to make a second call. Press the right soft key then select Address Book.

Swapping Between Two Calls

By using three methods, you can switch between two calls.

1. Press the [send] key.

2. Press the left/right navigation key.

3. Press the right soft key and then select "

Swap Calls".

Answering an Incoming Call

To answer an incoming call when the handset is ringing, simply press the [SEND] key. The handset is also able to warn you of an incoming call while you are already on a call. A tone sounds in the earpiece, and the display will show that a second call is waiting. This feature, known as Call Waiting, is only available if your network supports it.

If Call Waiting is on, you can put the first call on hold and answer the second call, by pressing the [SEND] key.

Rejecting an Incoming Call

You can reject an incoming call without answering by simply pressing the [END] key.

During a call, you can reject an incoming call by pressing the [END] key.

Muting the Microphone

In open the slide, you can mute the microphone during a call by pressing the left soft key [Mute]. The handset can be unmuted by pressing the left soft key [Unmute]. When the handset is muted, the caller cannot hear you, but you can still hear the caller.

Page 30

In-Call Menu

Using the Speakerphone

You can use the integrated Speakerphone during a call by pressing the key. The loudspeaker is automatically deactivated when you end the call.

n Warning

Due to higher volume levels, don’t place the phone near your ear while the speakerphone is enabled.

Video Share Calling

Making and Answering a Video Share Call

You can make and answer a Video Share Call with other 3G video phones. The other party must have a 3G Video-Share capable phone and be in a video service 3G coverage area.

n Note

Before you start a Video Share Call you must check the following:

• Phone must be in a AT&T 3G service area.

• Phone needs the presence of ‘GLOBE’ (you can see the on the left hand of the icon bar on the screen.)

• Select the service via the Video Share menu (see Menu 9.5.0).

To use Video Share follow these steps:

1. Make a phone call by dialing the number,

selecting the number from your contact list or selecting the number from the list of calls you have made or received.

2. Once the connection has been established,

after a few seconds the ‘Video Share Ready’ prompt will be displayed on the screen provided the other party is also Video Share enabled and in a 3G coverage area. Then, you are ready to begin sharing your video with the other party (or have video shared with you). (If you set Initial Notification to On from the Video Share (Menu 9.5.0), a notification pop-up window will be displayed. Select Yes and you will be connected directly to live Video Share Calling).

3. To send video to the other party, simply

press the camera button OR the right soft key [Options] - [Video Sharing] and select a Video Share type (Live or Recorded). Simply, press the Camera button and the live Video Share Call will start.

Page 31

In-Call Menu

n Note

The Speakerphone will be automatically activated when a Video Share session begins, unless a hands-free (Bluetooth or wired head set) is connected.

- Live: You can share a real-time video stream

with the other party while having a conversation.

- Recorded: You can share a pre-recorded video

clip with the other party while having a conversation. (Note that you can share only H.263 QCIF sized video files)

4. If the other party accepts your request, a

video share session begins. (It takes several seconds for the other party to accept your invitation and start the Video Share Call.)

During the Video Share session with the other party, you can select a menu item using the

navigation keys by pressing the left soft key

- Stop: stops video sharing and proceeds

with voice call only.

- Brightness: adjusts the brightness of the

screen.

- Mute/Unmute: mute/unmute the

microphone.

- Spk. Off/Spk. On: when Spk. On is

selected, you can have a conversation using the speakerphone. When Spk Off is selected, you can have a conversation using the headset.

You can record a current video clip via Options menu, and the recorded video will be saved in [My stuff] – [Video].

5. Select the STOP menu item to stop sending

video, or press the End key [End Call] to finish the call, or turn off the handset.

n Note

1. A Video Share Call will be terminated in the

following cases:

• When trying to make a conference call / second call during a Video Share Call.

• When the voice call is disconnected.

Page 32

In-Call Menu

• When moving out of a AT&T 3G service area.

• When the network connection is poor.

2. A Video Share Call will be unavailable in the

following cases (“Video Share Ready” message will be greyed out).

• When trying to make a conference call / second call during a Video Share Call.

• When holding or being held in a call.

• When moving out of a AT&T 3G service area.

“To receive a Video Share session:”

1. If you receive a Video Share request during a

call, select [Accept] to accept the request. If you don’t want to accept the request, press [Decline]. When you're a recipient of a Video Share session, the following menu items are available:

- Stop: stops video sharing and proceeds

with voice call only.

- Landscape: displays the incoming video

stream in landscape mode.

- Mute/Unmute: mute/unmute the

microphone.

- Spk. Off/Spk. On: when Spk. On is

selected, you can have a conversation using the speakerphone. When Spk. Off is selected, you can have a conversation using the headset.

n Note

• The speakerphone will be automatically turned on when a Video Share Call begins, and automatically back to the previous mode when a Video Share Call ends.

• If a hands-free or a Bluetooth headset is connected, then the speakerphone menu will be deactivated.

Making a Video Share Call in Camera & Recording mode

When you are in Camera & Recording mode, you can easily make a Video Share Call to a person in your Contact List.

1. Press the right soft key [Options] in

Take Photo/Record Video mode and select [Video Share]. (This menu item is displayed only in 3G coverage. If it is unavailable, you

Page 33

In-Call Menu

will not be able to select from this menu item.)

2. This screen provides you with three options

to make a Video Share Call:

a. Enter a number directly. b. Select a number from the list of recent

video sharers (last five numbers).

c. Select a number from the contact list.

n Note

• If the other party is not available for a Video Share Call, then the call will remain as a normal voice call.

Saving your Video Share

You can save your Video Share session if you are the sender. There will be a prompt asking if you would like to save or discard the video at the end of the Video Share session. If you choose to save the video, it will be saved in the "My Stuff," folder in your phone.

Conference Calls

The conference service provides you with the ability to have a simultaneous conversation with more than one caller. The conference call feature can be used only if your network service provider supports this feature.

A conference call can only be set up when you have one call active and one call on hold, meaning both calls must have been answered. Once a conference call is set up, calls may be added, disconnected or separated (that is, removed from the conference call but still connected to you) by the person who set up the conference call. These options are all available from the In-Call menu. The maximum number of callers in a conference call is five. Once started, you are in control of the conference call, and only you can add calls to the conference call.

Making a Second Call

You can make a second call while currently on a call simply by entering the second number and pressing the [SEND] key. When the second call is connected, the first call is automatically placed on hold. You can swap between calls, by pressing the [SEND] key.

Page 34

In-Call Menu

Setting Up a Conference Call

To set up a conference call, place one call on hold, conference in the second active call by pressing the right soft key and select the Join Calls sub menu option from the Conference Call menu.

Activate the Conference Call on Hold

To activate a conference call on hold, press the

[SEND] key.

Adding Calls to the Conference Call

To add a call to an existing conference call, press the right soft key, and then select the Join Calls sub menu from the Conference Call option.

Private Call in a Conference Call

To have a private call with one caller from a conference call, press the right soft key and select the Private Menu from the Conference Call option. When the numbers of the callers are displayed, select the one you wish to speak in private.

Ending a Conference Call

Currently active conference call can be disconnected by pressing the [END] key.

Page 35

Menu Tree

The following illustration shows the available menu structure and indicates the:

] Number assigned to each menu option.

] Page where you can find the feature description.

1. Cellular Video (see page 36)

2. Messaging (see page 37)

2.1 New Message

2.2 Inbox

2.3 IM

2.4 Mobile Email

2.5 Drafts

2.6 Outbox

2.7 Sent

2.8 Voicemail

2.9 Templates

2.9.1 Text Templates

2.9.2 Multimedia Templates

2.9.3 Signature

2.0 Message Settings

2.0.1 Text Message

2.0.2 Multimedia Message

2.0.3 Voicemail

2.0.4 Service Messages

3. Recent Calls (see page 49)

3.1 Missed Calls

3.2 Dialed Calls

3.3 Received Calls

3.4 All Calls

3.5 Call Duration

3.6 Data Counter

4. MEdia Net (see page 51)

4.1 MEdia Net Home

4.2 Bookmarks

4.3 Saved Pages

4.4 Enter URL

4.5 Recent Pages

4.6 Security

4.7 Browser Settings

4.7.1 Accounts

4.7.2 Primary Storage

4.7.3 Cache Settings

4.7.4 Cookie Settings

4.7.5 Character Encoding

4.7.6 Scrolling Control

4.7.7 Show Image

4.7.8 AuthWallet

Page 36

Menu Tree

5. AT&T Mall (see page 55)

5.1 Shop Ringtones

5.2 Shop Games

5.3 Shop Graphics

5.4 Shop Multimedia

5.5 Shop Applications

5.6 Shop Videos

5.7 MEdia Net Home

6. AT&T Music (see page 56)

6.1 Music Player

6.2 Shop Music

6.3 MusicID

6.4 XM Radio

6.5 Music Videos

6.6 The Buzz

6.7 Community

6.8 Music Apps

7. My Stuff (see page 64)

7.1 Games

7.2 Applications

7.3 Audio & Ringtones

7.4 Pictures

7.5 Videos

7.6 Tools

7.6.1 Voice Command

7.6.2 Alarm Clock

7.6.3 Calendar

7.6.4 Notepad

7.6.5 Calculator

7.6.6 Tip Calculator

7.6.7 World Clock

7.6.8 Tasks

7.6.9 Stop Watch

7.6.0 Unit Converter

7.6.* Date Finder

7.6.# D-Day Counter

7.7 Camera & Recordings

7.7.1 Take Photo

7.7.2 Record Video

7.7.3 Record Voice

7.8 Other Files

7.9 Memory Card

Page 37

Menu Tree

8. Address Book (see page 74)

8.1 Contact List

8.2 New Contact

8.3 Caller Groups

8.4 Speed Dial List

8.5 Copy All Contacts

8.6 Delete All Contacts

8.7 Service Dial Numbers

8.8 My Business Card

8.9 View Options

8.0 My Numbers

9. Settings (see page 76)

9.1 Audio & Ringtones

9.1.1 Shop Tones

9.1.2 Ringtones

9.1.3 Volume

9.1.4 Message Alert Tones

9.1.5 Alert Type

9.1.6 Key Tones

9.1.7 Increasing Ringtone

9.1.8 Power On/Off Tones

9.2 Display

9.2.1 Shop Graphics

9.2.2 Wallpapers

9.2.3 Backlight Timer

9.2.4 Brightness

9.2.5 Menu Styles

9.2.6 Languages

9.2.7 Dialing Fonts

9.2.8 Clocks & Calendar

9.2.9 Color Schemes

9.3 Bluetooth

9.3.1 Turn On/Off

9.3.2 Search New Device

9.3.3 Paired Devices

9.3.4 Settings

Page 38

Menu Tree

9. Settings (continued)

9.4 Date & Time

9.4.1 Set Date

9.4.2 Date Format

9.4.3 Set Time

9.4.4 Time Format

9.4.5 Auto Update

9.5 Call

9.5.1 Call Forwarding

9.5.2 Send My Number

9.5.3 Auto Redial

9.5.4 Answer Mode

9.5.5 Minute Minder

9.5.6 Call Waiting

9.5.7 Call Reject

9.5.8 TTY

9.5.9 Send DTMF Tones

9.5.0 Video Share

9.6 Security

9.6.1 Auto Key Lock

9.6.2 Lock Handset

9.6.3 PIN Code Request

9.6.4 Fixed Dial Number

9.6.5 Change Codes

9. Settings (continued)

9.7 Connection

9.7.1 Network Profiles

9.7.2 USB Connection Mode

9.8 Flight Mode

9.9 Software Update

9.0 Check Memory

9.0.1 Common

9.0.2 Reserved

9.0.3 SmartChip

9.0.4 Memory Card

9.* Handset Information

9.# Reset Settings

9.#.1 Master Reset

9.#.2 Master Clear

Page 39

Cellular Video

Cellular Video (CV) brings you quick, ondemand access to crystal clear news, sports, weather and entertainment video clips. Catch up on TV’s hottest shows, funniest comedians, biggest headlines and latest sports scores. You can even personalize your homepage for quick access to your favorites. In addition, the CV service automatically streams localized weather information to your personalized “News & Weather” page each and every day.

To access CV:

1. From standby mode, press the Left Soft Key

to access the Menu.

2. Scroll to and select CV (option 6).

3. Select a category and play a clip.

Page 40

Messaging

This menu includes functions related to SMS (Short Message Service), MMS (Multimedia Message Service), voice mail, as well as the network’s service messages.

New Message

n Note

If you select a graphic or an audio file while writing a multimedia message, the file loading time will take about 5 seconds. You will not be able to activate any key during the file loading time. When the file loading is complete, you will be able to write a multimedia message.

Editing a message

The following options are available for Editing a Message. (Press the left soft key [Insert])

] Symbol: You can insert symbols ranging

from sentence notes to emoticons. Select the one you want by navigating the left/right soft keys [Previous/Next].

] Graphic: You can select a graphic image by

using the left/right navigation keys. You can preview the selected picture by pressing the left soft key [View].

] Audio: You can insert various ringtones.

Menu 2.1

n Note

vCard, vCalendar, vNote and vTask are created by Address Book, Calendar, Notepad and Tasks respectively. Go to the Tools and Address Book sections for more detailed information.

Video: You can insert a video clip by using

]

the center key [Insert].

] New Photo: You can insert a new image

taken from the camera by pressing [Capture]. The following camera options are available when you press [Options]:

• Resolution: The resolution of the image can be captured in 1600*1200/1280*960/

640*480/ 320*240/160*120.

• Quality: The quality of the captured image can be Super Fine/Fine/Normal.

• Primary Storage: You can assign the primary storage to Handset or Memory Card.

• Flash: You can set the flash when you

take a photo in dark place.

• Self Timer: Camera timer can be set to Off/ 3 Seconds/5 Seconds/10 Seconds.

• Advanced Settings: Set the White Balance as Auto/Daylight/ Incandescent/Cloudy/Fluorescent/

Page 41

Messaging

Night mode. Color Effects includes options such as Color/ Sepia/ Mono/Negative. Shutter Tones can be set to Tone 1/ Tone 2/ Tone 3/ Off.

• Default Settings: Allows you to set to the

default settings.

] New Audio: You can record a new audio by

pressing the center key [Record]. After recording a new audio, you can cancel it by pressing the right key [Cancel]. To control the new audio menu, choose [Options] by pressing the right key. Under [Options], choose one of following

• Quality: Set the audio’s quality to Fine, Normal or Economy.

• Primary Storage: You can assign the primary storage to Handset Memory or Memory Card.

] New Video: You can record new video by

pressing the center key [Record].

] Subject: Type a subject into the message. ] Others: Allows you to insert vCard,

vCalendar, vNote or vTask.

] Template

- Text: You can easily insert the frequently

used sentences in the text message.

- Multimedia: The preset multimedia

templates are available.

- Signature: Input your own signature

created in (Menu 2.9.3). For further details, see page 47.

] Contact: You can browse one of your

contacts and insert it.

] Slide: You can insert a slide and place it to

Insert Slide Before or Insert Slide After.

Using Options

Press right soft key [Options].

• Preview: Shows the created multimedia

message before sending it.(Only for Multimedia Message)

• View Attachment: Shows the attached

file.

• Save to Drafts: Saves the selected

message to draft.

• Remove: Removes the selected

multimedia or vObject.(Only for Multimedia Message)

• Select Slide: If the message has more

than one slide, you can select and move to the desired slide.(Only for Multimedia Message)

Page 42

Messaging

• Set Slide: Sets the Duration, Text color

and background color of the selected slide. (Only for Multimedia Message)

• Settings (Only for Multimedia Message)

- Priority: You can set the priority of the

message you choose.

- Delivery Receipt: If it is set to Yes in

this menu, you can check whether your message is sent successfully.

- Request Read Receipt: This menu

allows you to determine whether to request a read confirmation mail to a recipient.

• Text Entry Mode: Sets the text input

mode. For more details, refer to Entering Text (page 21).

• Text Entry Settings: Text Entry Languages

allows you to set the text entry language to English, Spanish or French. T9 Next Word Prediction is available when it is set to On. Use T9 Dictionary to add words or delete/reset/modify words.

• Cancel: Allows you to exit the text input

mode without saving your input message.

Sending a Message

After completing a message using the Insert/Options, select Send To to send a message.

• Enter the recipient(s) as To, Cc and Bcc. You

can use the Contacts option to choose a recipient.

• Press the right soft key [Options].

You can insert symbols, refer to recent messages, recent calls and caller groups to set as a recipient, and edit your message. For the

Save to Drafts, Text Entry Mode, Text Entry Settings and Cancel options, see the

descriptions above.

Inbox

You will be alerted when you receive a message. They will be stored in the Inbox. In the Inbox, you can identify each message by icons. If you are notified that you have received a multimedia message, you can download the whole multimedia message by selecting it in the Receive menu.

The following [Options] are available in the Inbox list.

] Call: You can make a voice call.

Menu 2.2

Page 43

Messaging

] Save Contact Info: You can save the

sender's phone number in the Contact List.

] Delete: You can delete the current message. ] Forward: You can forward the selected

message to another party.

] Reply All: Allows you to reply to all

recipients on the selected message (Only for Multimedia messages).

] Information: You can view information

about received messages; Message type, Subject, Sender's address, Message date & time, Priority, Message size, Attached Files (Only for Multimedia messages).

] Multi Delete: Deletes a number of

messages you have selected from the folder.

] Delete All Read Messages: You can

delete all read messages.

] Delete All: You can delete all messages. ] Cancel: Allows you to exit the options

menu.

Menu 2.3

The Instant Messaging feature can only be used with the support of the network operator or communities such as AIM, Windows Live and Y! Messenger. For Instant Messaging users, a valid User ID and Password will be required in order to login and exchange messages as well as checking the online status.

1. Through the Main Menu.

2. Through the IM hotkey (the right navigation

key). Short pressing the hotkey will bring up the available IM clients. The menu items below might not appear since not all IM communities support the various options. Also the menu strings may appear differently based on the selected IM communities. The keywords such as User ID, Login and Contact will be used as general terms in IM menus according to the currently selected communities such as AIM, Windows Live and Y! Messenger.

Offline Menu Sign On

This allows users to login by filling in the User ID and Password.

Page 44

Messaging

n Note

Once the User ID and Password are saved, you will not be required to type them in again during Login process. This feature is optional.

Saved Conversations

This is where a user can view saved conversations.

Settings

] Set Sound: Allows you to set on/off an alert

for the Contact when they have activity on their session.

] Default Provider: Allows you to set the

default IM community to login.

] Auto Sign In: You may set the automatic IM

] Network: You may check your IM Network

Profiles or Server Address information.

IM Information

This indicates the Instant Messaging Client Information such as Client Name and Version Number.

Online Menu / 1 to 1 conversation

After a successful Login, a list of contacts with Screen Names will appear on screen. Depending on the cursor location in the contacts, the following menu options will be available.

When cursor is located on a Conversations List

n Note

The Conversations List contains both the active contact where a conversation has taken place as well as an unknown contact.

Note

When you select the left/right navigation key or the Confirm key on the Conversation List, it offers the ability to view or hide conversations.

Send to Others: This offers the ability to

]

send a message to an unknown contact. When selected, a User ID must be typed in prior to starting an IM session or conversation.

] Saved Conversations: You may view or

delete the stored conversation session.

Page 45

Messaging

] Search: This allows you to search for the

contact by Email address or name.

] Settings

• My Status: Allows you to set your status

to Available, Busy or Invisible.

• Set Sound: Allows you to set an alert for

the Contact when they have activity on their session.

• Auto Sign On: You may Login to an IM

client automatically with the ‘When Power On’ or ‘When IM Start’ options.

] Log Out: This begins the Logout process.

When cursor is located on a Conversation

] End Conversation: This closes the selected

conversation. If an unknown contact was selected, that contact is deleted.

] Block/Unblock Contact: This allows you

to block/unblock the selected Conversations Contact.

] View Information: This allows you to view

the User ID and Status Text information.

] Search: This allows you to search for the

contact by Email address or name.

] Settings: Please refer to the previous

Settings Menu.

] Log Out: This begins the Logout process.

When cursor is located on a Contact List

] Add Contact: This adds a new contact to

the selected contacts’ list; in the meantime this searches for the contact on the basis of E-mail Address, First Name, or Last Name.

] Refresh List: This refreshes the present

information on the contacts within the contacts.

] Send to Others: This offers the ability to

send a message to an unknown contact. When selected, the User ID must be typed in prior to starting an IM session or conversation.

] Saved Conversations: This is where a user

can view saved conversations.

] Search: This allows you to search for the

contact by Email address or name.

] Settings: Please refer to the previous

Settings Menu.

] Log Out: This begins the Logout process.

Page 46

Messaging

When cursor is located on a Contact

] Add Contact: This adds a new contact to

the selected contacts list; in the meantime this searches for the contact on the basis of E-mail Address, First Name, or Last Name.

] Delete Contact: This deletes the selected

Contact.

] Block/Unblock Contact: This allows or

blocks conversation with the selected Contact.

] Refresh Contact: This refreshes the present

information on the selected contact.

] View Information: This allows you to view

information. It provides User ID, Status Text.

] Search: This allows you to search for the

contact by Email address or name.

] Settings: Please refer to the previous

Settings Menu.

] Log Out: This begins the Logout process.

Menu options available in the Conversation screen

] Back To List: This brings the screen back to

the contacts.

] Insert: You can insert Symbol, Template and

emoticons in the conversation screen.

] Block/Unblock Contact: This allows or

blocks conversation with the selected Contact.

] Save Conversation: Stores the currently

active conversation.

] End Conversation: This ends the active

conversation and clears the conversation buffer.

] Settings: Please refer to the previous

Settings Menu.

] Text Entry Mode: Sets the text input mode

such as abc, Abc, ABC, T9 abc, T9 Abc, T9 ABC and 123.

] Text Entry Mode Settings: This selects the

T9 predictive mode Language.

n Note

•

In the conversation window, you can use the up/down navigation key for scrolling through the conversation.

•

Maximum number of characters supported by a message is 800 characters for receiving and 127 characters for sending.

•

The present information might not update in real time so the “Refresh List”/“Refresh Contact” option can be used for the most up to date status.

Page 47

Messaging

Mobile Email

Mobile Email allows you to access your Yahoo! Mail, AOL Mail, AIM Mail, Windows Live Mail, AT&T Yahoo!, BellSouth Mail and Other providers accounts on your phone. So, now you can quickly and easily check your email while you’re away from your computer.

To Set Up Mobile Email

] Open Mobile Email: Slide out the keyboard,

highlight Mobile Email and press OK.

] Select an Email Provider: Use the joystick

to highlight the email provider you wish to use and press OK.

] Log In

1. Highlight the ID entry field, press down on

the joystick, and then type in your existing email ID.

2. Scroll down and highlight the Password

field, press down on the joystick, and enter your password. Quick Tip: Your password is case sensitive. Press the

on the keypad to change to lower

case or upper case.

3. To save your password scroll down to

Remember Me and press down on the joystick to check the box.

Menu 2.4

4. Select Sign In.

] Opening an Email: Just scroll down and

highlight the email subject line you want to open and press down on the joystick. Once the email opens, just select Options to reply, forward, or delete.

] Deleting an Email: Just scroll down to the

email you want to delete, press Options, then Delete.

For additional details, visit www.att.com/email

Drafts

You can view the messages saved as a draft. The draft messages are listed with the date and time of when the messages were saved.

The following [Options] are available.

] Call: You can make a voice call. ] Information: Allows you to view the

information on the message.

] Multi Delete: Allows you to delete multiple

messages you select from the folder.

] Delete All: Deletes all messages in the

folder.

] Cancel: Allows you to exit the options

menu.

Menu 2.5

Page 48

Messaging

Outbox

Outbox is a temporary storage place for messages waiting to be sent.

When you press the [SEND] key, you can make a call to the number of the recipient number of the selected message.

If the message is not sent from the Outbox, you will receive a sound alert along with a Message Sending Fail notice on the screen. Another attempt will be made to send the failed message and after two unsuccessful attempts, the message will no longer be sent automatically order to send the message that has failed, you must press Resend from the Options menu.

After the maximum number of Send attempts has been reached the Send function has failed.

If you were trying to send a text message, open the message and check that the Sending options are correct.

When the message Send has failed, the following [Options] are available.

] Call: You can make a voice call. ] Delete: Deletes the selected message

which has failed.

Menu 2.6

] Edit: Allows you to edit the selected

message.

] Information: Allows you to view the

information on the message.

] Delete All: Deletes all messages in the

folder.

] Cancel: Allows you to exit the options

menu.

Sent

This is where you can view the lists and contents of sent messages and also verify if transmission was successful.

The following [Options] are available.

] Call: You can make a voice call. ] Delete: Deletes the selected message from

the Sent list.

] Edit: Allows you to edit the selected

message.

] Information: Allows you to view information

on the message.

] Delete All: Deletes all messages in the

folder.

] Cancel: Allows you to exit the options

menu.

Menu 2.7

Page 49

Messaging

Voicemail

This menu provides you with a quick way of accessing your voice mailbox (if provided by your network).

Before using this feature, you must enter the voice server number obtained from your service provider.

This may already be available; to check the voicemail, press and hold the key.

When new voicemail is received, the symbol

will be displayed on the screen.

n Note

Please check with your network service provider for details of their service in order to configure the handset accordingly.

Templates

Text Templates

There are 6 predefined messages in the list. You can view and edit the template messages or create new messages.

The following [Options] are available.

] Send: Allows you to send the selected

template via Message.

(Menu 2.9.1)

Menu 2.8

Menu 2.9

] Delete: Allows you to delete the selected

template message.

] Edit: Allows you to write a new message or

edit the selected template message.

] Delete All: Deletes all messages in the

folder.

] Cancel: Allows you to exit the options

menu.

Multimedia Templates

1. You can add new multimedia templates by

pressing the left soft key [New].

2. The following choices are available under

Options.

] Preview: You can preview multimedia

messages you have created.

] Text Entry Mode: Sets the text input mode

as abc, Abc, ABC, T9 abc, T9 Abc, T9 ABC and 123.

] Text Entry Settings: Text Entry Language

allows you to set the text entry language to English, Spanish or French. T9 Next Word Prediction is available when it is set to On. Use T9 Dictionary to add words or delete/reset/modify words.

] Cancel: Allows you to exit the text input

mode without saving your message.

(Menu 2.9.2)

Page 50

Messaging

Signature

This feature allows you to create your Text signature. You can use symbols, text templates and contacts as part of the signature.

Message Settings

Text Message

]

] Email Gateway: You can send the text

] Message Subject: You can enter the SMS

] Insert Signature: You can insert your own

Multimedia Message

]

] Message Subject: You can enter the MMS

(Menu 2.9.3)

Menu 2.0

(Menu 2.0.1)

Message Center Number: If you want to send a text message, you can get the address of the SMS center by using this menu.

message to an Email Address via this gateway.

Subject from this menu.

signature (Menu 2.9.3) that you created.

(Menu 2.0.2)

Priority: You can set the priority of the message you choose.

Subject when this menu is on.

] Validity Period: This network service

allows you to set how long your multimedia messages will be stored at the message center.

] Send Delivery Receipt: Allows you to send

a delivery confirmation mail for a Multimedia Message.

] Send Read Receipt: Allows you to send a

message read confirmation mail for a Multimedia Message.

] Download Options

- Download Without Ask: Allows

Multimedia Message to be downloaded automatically.

- Ask Always: You can download a

multimedia message manually.

- Discard: Used when user reject to

download Multimedia Message.

] Message Center: The details for the

Multimedia gateway are pre-loaded onto your handset and should not be changed.

Page 51

Messaging

Voicemail

This menu allows you to set the voicemail center number if this feature is supported by the network service provider. Please check with your network service provider for details of their service in order to configure the handset accordingly.

Service Messages

You can set the Service option to determine whether you will receive service messages or not.

(Menu 2.0.3)

(Menu 2.0.4)

Page 52

Recent Calls

You can check the record of missed, received, and dialed calls only if the network supports Calling Line Identification (CLI) within the service area.

The number and name (if available) are displayed together with the date and time of the call. You can also view call times.

Missed Calls

• View the number, if available, and call it or save it in the Address Book.

• Enter a new name for the number and save both in the Address Book.

• Send a message using this number.

• Delete the call from the list.

Dialed Calls

• View the number, if available, and call it or save it in the Address Book.

• Enter a new name for the number and save both in the Address Book.

• Send a message using this number.

• Delete the call from the list.

Menu 3.1

Menu 3.2

Received Calls

• View the number, if available, and call it or save it in the Address Book.

• Enter a new name for the number and save

both in the Address Book.

• Send a message using this number.

• Delete the call from the list.

All Calls

Allows you to view all of missed, received, and dialed call records.

Call Duration

This allows you to view the duration of incoming and outgoing calls. You can also reset the call times. The following timers are available:

Menu 3.3

Menu 3.4

Menu 3.5

Last Call

Length of the last call.

Received Calls

Length of the incoming calls.

Dialed Calls

Length of outgoing calls.

Page 53

Recent Calls

All Calls

Total length of all calls made and incoming calls received since the timer was last reset.

Data Counter

You can check the Sent, Received or All data volumes and Reset data counter.

Menu 3.6

Page 54

MEdia Net

This menu shows how to access the Internet by launching the WAP browser.

MEdia Net is one of the services provided by AT&T and it gives you access to all the cool things you can do with your wireless phone.

n Note

Check the availability of WAP services, pricing and tariffs with your network operator and/or the service provider whose service you wish to use. Service providers will also give you instructions on how to use their services.

Please contact your service provider to open an Internet account.

To launch the browser in standby mode, press and hold down the key.

Once connected, the homepage is displayed. The content depends on the service provider.

To exit the browser at any time, press the key. The idle screen is displayed.

Menus for the Browser

You can surf the Internet using either the phone keys or the WAP Browser menu.

Using the Navigation Keys

When surfing the Internet, the keys function differently from phone mode.

Key Description

up/down navigation key

Scroll each line of the content area

Using the WAP Browser Menu

There are various menus available when surfing the Internet.

MEdia Net Home

This connects to the homepage which is defined in the activated account. The default account connects to AT&T’s homepage.

Bookmarks

This function allows you to store and edit frequently accessed sites. The following [Options] are available.

n Note

Your phone may have some pre-installed bookmarks for sites not affiliated with LG. LG does not warrant or endorse these sites. If you choose to access them, you should take the same precautions for security or content as you would with any site.

View: Display the bookmark title and URL.

]

Menu 4.1

Menu 4.2

Page 55

MEdia Net

] Connect: Connect to the selected bookmark

site.

] New: Add a new bookmark manually. ] Edit: Modify the existing bookmark item. ] Delete: Allows you to erase the selected

bookmark.

] Send URL: Allows the bookmark information

to be sent via SMS to another person.

] Delete All: Allows you to erase all

bookmarks.

] Cancel: Allows you to exit the options

menu.

n Note

Pre-installed bookmarks cannot be deleted or edited by users. In order to change the text input mode for symbol input, please refer to the General Functions section.

Saved Pages

This saves the page on display as an off-line file. A maximum of 20 pages can be saved.

Menu 4.3

Enter URL

Input the URL manually to connect to the Internet site.

Recent Pages

You can manage the list of the Internet pages you visited.

Security

A list of the available certificates is shown.

] Certificates: You can see the list of

certificates and view them in detail.

] Clear Session: Removes the secure session.

Browser Settings

Accounts

This includes the network information used to connect the browser to the Internet.

Select the desired account by pressing the soft key, which is labeled as “Activate”. This will activate the account that will be used for future connection.

MEdia Net is the predefined account that is set as default.

(Menu 4.7.1)

Menu 4.4

Menu 4.5

Menu 4.6

Menu 4.7

Page 56

MEdia Net

] Activate: Select the account among the list

of accounts, so it can be used for future connection.

] View: Allows you to see the specific

account information.

] Edit: Allows you to change the account

information.

] Delete: Allows you to delete the account. ] New: Allows you to create a maximum of 10

new accounts.

] Cancel: Allows you to exit the options

menu.

n Note

You cannot edit and delete pre-installed accounts.

In order to create a new account, please fill in the network information.

1. Account Name: Name associated with

new account.

2. Homepage: Homepage URL.

3. Connection Mode: Select from TCP with

Proxy, TCP without Proxy, UDP(CO), UDP(CL).

4. Proxy Address: Proxy server address.

5. Proxy Port Number: Proxy server’s port

number.

6. Security: Select the secure or non-secure mode.

7. Time Out: Values between 10 to 600 seconds.

8. Network Profile: You can choose one from the network profiles. Note you can create a new network profile by selecting the list option on the center key.

n Note

1. The account information will be available from

your operator.

2. Creating or editing an account requires care.

The browser cannot connect to the Internet if the account information is not correct.

Primary Storage

(Menu 4.7.2)

You can assign the primary storage to

Handset or Memory Card.

Cache Settings

(Menu 4.7.3)

The web pages you have accessed are stored in the memory of the phone.

] Clear Cache: Remove all cached data in the

memory.

] Allow Cache: Set a value to determine

whether a connection attempt is made through the cache or not.

Page 57

MEdia Net

n Note

A cache is a buffer memory, which is used to store data temporarily, especially when it is online.

Cookie Settings

(Menu 4.7.4)

The information or services you have accessed are stored in the cookie.

] Delete Cookies: Remove all cookies. ] Allow Cookies: Set a value to determine

whether a connection attempt is made through the cookie or not.

Character Encoding

(Menu 4.7.5)

Select a character set from the following list:

1 Automatic 2 English(ASCII) 3 English(ISO) 4 English(LATIN) 5 Unicode(UCS2 BE) 6 Unicode(UCS2 LE) 7 Unicode(UCS2 Auto) 8 Unicode(UTF-16 BE) 9 Unicode(UTF-16 LE) 0 Unicode(UTF-16 Auto) * Unicode(UTF-8)

Scrolling Control

(Menu 4.7.6)

This allows you to determine the scroll speed and select from 1 Line, 2 Lines or 3 Lines.

Show Image

(Menu 4.7.7)

This allows you to view pictures when browsing.

AuthWallet

(Menu 4.7.8)

If set to On, the user’s personal information such as ID and Password used to access the Internet site will be saved automatically for future use.

Online menu

Once you are connected to the Internet, the following menu options are available:

] Back: Moves to the previous page. ] Forward: Moves to the next page. ] Refresh: Loads the current page again. ] Home: Moves to the initial homepage. ] Enter URL: Connects to the specific URL

after editing.

] Recent Pages: You can manage the list of

the Internet pages you visited.

] Bookmarks: You can add or save the

current page to Bookmark or view the list saved under Bookmark.

] Settings: You can set browser related

options such as Clear Cache, Clear Cookie, etc.

] Cancel: Allows you to exit the options

menu.

Page 58

AT&T Mall

Shop Ringtones

This menu option connects to AT&T’s ringtone download site.

Shop Games

This menu option connects to AT&T’s game download site. This allows users to download the various games by connecting to the Internet.

Shop Graphics

This menu option connects to AT&T’s graphic download site.

Shop Multimedia

This allows you to connect to AT&T's multimedia download site.

n Note

Additional charges may incur when downloading contents. Contact your service provider for further information.

Menu 5.1

Menu 5.2

Menu 5.3

Menu 5.4

Shop Applications

This menu option connects to AT&T’s application download site. This allows users to download the various applications by connecting to the Internet.

Shop Videos

This menu option connects to AT&T's video download site.

MEdia Net Home

This connects to the homepage. The homepage is the site which is defined in the activated account.

Menu 5.5

Menu 5.6

Menu 5.7

Page 59

AT&T Music

Music Player

] All Songs: You can view the entire songs in

the internal/external memory.

] Playlists: You can create your own playlists

by choosing songs from the All Songs menu list.

] Artists: Shows the list of artists of all the

songs in internal/external memory, and shows the song of chosen artist.

] Albums: Shows the list of albums of all the

songs in internal/external memory, and shows the song of chosen album.

] Genres: Shows the list of genres of all the

songs in internal/external memory, and shows the song of chosen genre.

n Note

Copyrights of music files may be protected by copyright and intellectual property laws. Therefore, it may be required to obtain necessary permissions or licenses before you can reproduce or copy the materials. In some countries, national law prohibits copying of copyrighted materials for personal archive as well. Prior to downloading or copying the files, please ensure that you adhere to the applicable laws and laws of corresponding countries or regions regarding the Terms of Use of materials.

Menu 6.1

Playing Music

To listen to music that you have transferred to your phone, follow these quick easy steps:

Playing Music with the Slide Open

1. Press the left soft key Menu, select AT&T Music(6), Music Player(1), then All Songs or Playists(2).

Select a song or playlist.

2. Press to play/pause. Press up or down on the Navigation Key to change

the volume, and left or right to go to the previous or next song.

3. Press the Left Soft Key for Minimize to access other phone functionality while music is playing.

4. Press the key to browse for a song or playlist again.

Adding Music To Your Handset

Before You Get Started

To transfer music from your PC to your device, you will need the following:

• Windows Media Player 10 or above

• Music on your PC in one of these formats: MP3, AAC, AAC+ or WMA

• A MicroSD card (supports up to 4GB cards)

Page 60

AT&T Music

• USB data cable

*microSD card and USB data cable sold

separately; go to att.com/wireless

Adding Music to your Handset

Music files can be added to your handset by using one or more of the following methods:

• Download music and ringtones over the AT&T network directly to your device by using the shopping for music feature.

• From your existing digital media collection thru Windows Media Player

• From music stores through the applicable music client.

Transferring music using Windows Media Player

1. Insert microSD memory card in phone.

2. Connect phone to the computer using USB

cable.

3. Once the USB cable is connected, the handset displays "Connected as Music Sync Mode. Do not disconnect during transfer.”. The computer screen shows the phone.

4. On the computer, you will be prompted to launch your preferred music management software.

n Note

Music stores may require other software to be downloaded and separately installed or see User Guide for use of Windows Explorer to drop and drag tracks from you computer to phone.

5. Once your music management software is

launched, highlight the track(s) you wish to transfer to the handset and begin the transfer process.

n Warning

Do not disconnect phone while the transfer is in progress.

Note

Not compatible with iTunes and/or iTunes files.

Drag and Drop Music Using As A Mass Storage Device

1. Insert a MicroSD memory card.

2. Power on the phone.

3. Connect the device to a PC using a

USB data cable.

4. A bubble may appear, "Found New Hardware

LG USB Modem".

5. Access My Computer on the PC.

Page 61

AT&T Music

6. The phone's memory card will be listed under

"Devices with Removable Storage" in the same location as an optical drive.

n Note

The PC will automatically assign a drive letter.

7. File explore in a new window for desired

music files.

8. Drag and drop the desired music content

from the PC window to the "Storage Card" window.

9. Disconnect the device from the cable.

10. Access the Music Player on the phone.

n Note

Sideloading is not supported via Bluetooth.

Transferring Music from the Digital Music Stores

In order to download music from the computer to your handset, a microSD card and USB data cable are required. These items are sold separately; please visit att.com/wireless to purchase them.

1. Using your computer, open your preferred

WMDRM PC music management client.

2. See steps 1-3 of Transferring music using

Windows Media Player on page 57 for details).

n Note

If the target computer does not detect the newly connected handset or show the Portable Device dialog box on the PC screen, please follow steps 3 - 4.

3. See page 85 (USB Connection Mode) for

details.

4. Use the Up or Down Navigation key to

highlight Music Sync and press the Select soft key or the [OK] key.

5. Highlight the song you wish to download to

the handset.

6. Using your right mouse button, click on the

highlighted song and select Transfer Track(s) to Portable Device from the drop-down menu. This step begins the download process.

7. From within the Windows Media Player

application, click on the Sync tab. Previously downloaded songs are then listed on the left side of the application.

8. Choose the destination location for the media

files. The CU720 Music Sync Player appears in a drop-down list on the right side of the screen.

Page 62

AT&T Music

n Note

If there are no items present in the playlist, click the Edit Playlist button and begin adding the music files from among the various media categories.

9. Click on the checkmark boxes (to the left of the song entry) to select the song you want to synchronize to your handset.

10. Click the Start Sync button at the upper

right corner of the application to download the selected songs to your handset. A “synchronization in progress” message appears on the application. Do not unplug the handset during this process. Once complete, a Music folder appears below the CU720 Music Sync Player on the right of the Sync tab.

11. It is now safe to unplug the USB connector

from the handset.

Importing a Playlist from a 3rd Party Application

1. Open Windows Media Player on your

computer (version 10.0 or higher).

2. Use the USB adapter cable to connect the handset to the target PC. When you try to connect handset on your PC, the handset displays “Connecting as Music Sync...”.

3. Once the USB connection has been

established, the handset displays " Connected as Music Sync Mode. Do not disconnect during transfer. " and the computer screen then shows the device.

4. From within the Windows Media Player

application, click on the Library tab.

5. From the left side of the Library tab, click on

All Music. The right side of the page is then populated with all of the songs which the player has previously found.

6. Right click on the song entry and select, Add

to.. > Additional Playlists.

7. From the Add to Playlist dialog, click the New

button and type in a unique playlist name.

8. Click OK when you are done entering the new

playlist name. The new Windows Media playlist is then displayed within the My Playlist section of the Library tab (left side).

9. Drag and drop the newly created playlist from

the My Playlist section to the phone Music Sync Player listed just above it. The phone Music Sync Player appears on the left side of the screen.

Page 63

AT&T Music

n Note

If there are no items present in the playlist, click the Edit Playlist button and begin adding the music files from among the various media categories.

10. It is now safe to unplug the USB connector

from the handset.

n Note

1. If you connect your handset with a Specific

USB Hub on your PC, the above music sync service may not work. So we recommend a direct USB Connection on your PC instead.

2. Once you connect your mobile phone to the

PC, the phone's screen will display the "Connecting as Music Sync..." message. If the message does not change to "Connected as Music Sync Mode. Do not disconnect during transfer.", check if your PC is running Windows XP and Windows Media Player 10 or later. If your PC is running Windows XP and Windows Media Player 9, please download WMP10 or WMP11 by visiting Microsoft site. If your PC is running XP and WMP10 or later but "Connecting as Music Sync..." message does not disappear from the screen after you have tried to establish connection three to four times, perform one of the following methods and try again.

(Please note that all of the existing data will be erased on microSD card if you use the below process.)

A. Follow those steps: Settings -> Reset

Settings -> Master Clear -> Memory Card.

B. Format external memory using Mass

Storage.

C. Remove external memory from the phone,

and insert external memory to the phone and format.

3. If you have connected your handset to PC, and

trying to send file using Music Sync, but the function is not working properly, please check the below lists.

A. Check whether the file length you are

transmitting is not too long.

B. Check whether the license of the file you

are transmitting is not expired.

C. Check whether the file you are transmitting

is a right format for your phone (MP3, WMA, AAC).

If you have checked the above three lists, and still the file is not transmitted, please try the actions on 2.

4. If you transfer files as shown below, the

transferred files will not show in a third party application or in Windows Media Player.

A. Transmitted a file using Mass Storage, but

not using Music Sync function.

Page 64

AT&T Music

B. Transmitted a file by directly inserting

external memory on PC.

5. When you have transferred files with Music

Sync feature and you want to delete them from your phone, you should connect the phone to your PC again with Music Sync to delete them. Even if you have deleted files transferred with Music Sync feature as shown below, delete them again with Music Sync. Otherwise you will not be able to transfer files identical to the deleted files again.

A. Deleted a file using Mass Storage, but not

using Music Sync function.

B. Deleted a file by directly inserting external

memory on PC.

C. Deleted a file using delete function on the

phone.

Shop Music

Menu 6.2

Selecting Shop Music from the AT&T Music sub menu launches the browser to a music landing page from which you can purchase music from 3rd party stores and personalization content from AT&T. Some sites are data intensive (i.e. previews via streaming) so the user should have an unlimited MEdia bundle like the MEdia Max 200.

n Note

Additional charges may incur when downloading ringtone.

Contact your service provider for further information.

MusicID

Menu 6.3

MusicID is an application which uses the onboard microphone to analyze a song sample and then compare it to a remote database of songs. Once the application completes the analysis of the song sample, it then provides you with the name of the song, artist and album art as well as opportunities to buy related content.

] ID song!: Allows you to find out information

of unknown music by sending the sound of the unknown music to the web. If the web identifies the song, it returns with relevant information of the song.

] manage IDs: Once a song has been

identified through the MusicID, you can see the list of songs in this folder.

] help me out: Information for how to use this

java application.

] exit: Ends the application and exits.

Page 65

AT&T Music

XM Radio

Selecting XM Radio from the AT&T Music sub menu launches a preinstalled java application.

The application allows the user to listen to dozens of channels of digital radio on your mobile phone. Get unlimited access to commercial-free music, the latest Hip Hop, R&B, Rock, Jazz, Country anywhere you go.

Warning: This product will use a large amount

of data and you are responsible for all data charges incurred. AT&T strongly recommends that you subscribe to a MEdia Max data bundle IN ADDITION to this purchase. Call AT&T at 611 to sign up for the MEdia Max package if needed.

Menu 6.4

Music Videos

Selecting Music Videos from the AT&T Music sub menu launches a browser which takes you directly into the Music Video section of Cellular Video. From this menu, you will have access to music videos from the latest artist as well as programming from AT&T, MTV,VHI, and CMT among others. Simply click on a video and begin watching!

n Note

Additional charges may incur when downloading music video contents.

Contact your service provider for further information.

The Buzz

Selecting The Buzz from the AT&T Music sub menu launches a preinstalled java application (e.g. Billboard). The application allows the user to obtain relevant music industry news and information including charts, news, and concert locations.

Menu 6.5

Menu 6.6

Page 66

AT&T Music

Community

Selecting Community from the AT&T Music sub menu launches the browser to either one or more of the hot user communities. The application allows the user to interact with their friends and the community as well as review artist fan sites.

Music Apps

Selecting Music Apps from the AT&T Music sub menu launches the browser to an area where the user can purchase music related applications for download.

Menu 6.7

Menu 6.8

Page 67

My Stuff

Games

Java is a technology developed by Sun Microsystems. Similar to the way you would download the Java Applet using the standard Netscape or MS Internet Explorer browsers, Java MIDIet can be downloaded using a WAP enabled phone. Depending on the service provider, Java based programs such as Java games can be downloaded and run on a phone. Once downloaded, the Java program can be viewed within the Games menu where you can select, execute or delete. Java program files saved in the phone or memory card are in .JAD and .JAR formats.

n Note

The JAR file is a compressed format of the Java program and the JAD file is a description file that includes all detailed information. From the network, prior to download, you can view all detailed file descriptions from the JAD file.

Warning

Only J2ME (Java 2 Micro Edition) based programs will run in a phone environment.

J2SE (Java 2 Standard Edition) based programs will only run in a PC environment.

Menu 7.1

Shop Games: This menu option connects to

]

AT&T’s game download site.

] Games List: You can see the default and

downloaded games in the list.

Applications

This menu displays the list of Java programs downloaded using WAP. All previous downloaded programs can be selected, deleted, or viewed in detail within the Application menu.

] Shop Applications: This menu option

connects to AT&T’s application download site.

] Applications List: You can see the

downloaded applications in the list.

Audio & Ringtones

] Shop Ringtones: This menu option

connects to AT&T’s ringtone download site.

] Answer Tones: This menu option connects

to AT&T's answer tone download site.

] Record Voice: You can record your own

audio by pressing the center key [OK].

Menu 7.2

Menu 7.3

Page 68

My Stuff

] Files: You can view the audio files in the

list.

Pictures

] Shop Graphics: This menu option connects

Menu 7.4

to AT&T’s graphic download site.

n Note

Additional charges may be incurred when downloading graphics. Contact your service provider for further information.

Take Photo: You can take your own photo

]

by pressing the center key [OK].

] Make Animated GIF: You can make an

animation file with the selected images in the list.

] Files: You can view the graphic files in the list.

Videos

] Shop Videos: This menu option connects to

Menu 7.5

AT&T's video download site.

] Record Video: You can record your own

video by pressing the center key [OK].

] Files: You can view the video files in the list.

n Note

DRM (Digital Rights Management) Contents Copyright protected contents.

DRM sometimes restricts some functions, such as send, and edit. The indicates content controlled by DRM protection.

Tools

Voice Command

Note

Press and hold down key to access the Voice Command menu.

(Menu 7.6.1)

Menu 7.6

Voice command is the function whereby your phone's voice recognition engine identifies the voice of the user and carries out the requested commands.

When the user operates the voice command function, there are six possible commands, Call Someone, Dial Number, Listen Voicemail, Missed Calls, Messages and Time and Date.

1. Call <Name or Number>: this command is

activated when the user says "Call Someone". When the phone prompts you to "Say a name," clearly state a name from your phone's address book, followed by the corresponding handset retrieval data.

Page 69

My Stuff

• Commands available to user

- Next: cursor moves to the next set of data.

- Yes: make phone call.

- Cancel: back to the call someone screen.

- Exit: terminate voice command.

2. Listen Voicemail: this command is

activated when the user says the words Listen Voicemail. You will be automatically connected to your voicemail.

3. Missed Calls: this command is activated

when the user says the words Missed Calls. The mobile phone displays your history of missed calls.

• Commands available to user

- Yes: make phone call

4. Messages: this command is activated

when the user says the word Messages. Mobile phone displays details of unread SMS or MMS messages.

• Commands available to user

- Yes: make phone call

5. Time & Date: this command is activated

when the user says the words Time & Date. The phone displays the current time and date.

The voice command also has menu options;

• Mode

- Speed: Voice command is abbreviated.

- Normal: Voice command is played

normally.

• Train

- Answer: Enables the user train for

answers used via voice command.

- Number: Enables the user train for

numbers used via voice command.

• Best Match

- 1 Match: When the user tries to find a

name from the address book via the call someone function, the most likely match will be displayed.

- 4 Matches: When the user tries to find a

name from the address book via the call someone function, the four most likely matched names will be displayed.

• Speakerphone Mode

- Automatic On: When this option is

selected, sound is loud enough so you can hear in a distant place.

Page 70

My Stuff

- Off: When this option is selected, sound

is not loud enough so you can hear in a distant place.

Alarm Clock

(Menu 7.6.2)

The alarm function allows you to set up multiple separate alarms. You can also set the time, repetition interval and alarm sound.

Select your desired alarm setting to configure from the alarm list. If there is no alarm setting, press the left soft key [New] to add a new alarm.

] Time: Select the desired set time mode

using the navigation key. Input your desired alarm time by specifying the hour and minute. If the time is in 12 hour clock format, you have to select either am’ or pm’ using the center soft key.

] Repeat: Select the desired repeat mode

using the navigation key.

] Alarm Tone: Select the alarm sound to use

for the alarm using the key.

] Memo: Input alarm name.

Calendar

(Menu 7.6.3)

When you enter this menu a calendar will be displayed. The square cursor is used to locate a particular day. The bottom bar on the calendar indicates schedule(s) for that day. This function helps to remind you of the schedule. The phone will sound an alarm tone if it has been set for a specific schedule item.

Key Description

up/down navigation key Weekly

left/right navigation key Daily

key/ key

Annually

Monthly

The following [Options] are available:

] Search: Allows you to search the saved

schedule(s) by pressing the character keys.

] Delete: Allows you to delete the selected

schedule.

] Send Via: Sends the selected schedule by

Message or Bluetooth.

] Set Holiday: Allows you to set your

personal holiday for the selected date.

Page 71

My Stuff

] View All: Allows you to view all saved

schedules.

] Go to Date: Allows you to jump to a specific

date.

] Delete Schedules: Deletes the defined

schedules such as Old Schedules, Daily, Weekly, Monthly or All Schedules.

] Cancel: Allows you to exit the options

menu.

Notepad

You can create up to a maximum of 30 memos.

1. Select a memo pad you want to edit.

2. Press the left soft key [New] to create a new

3. Input the memo and press the center key

Calculator

The calculator function allows you to add, subtract, multiply and divide. You can input numbers using the number keys, and input operators using the up, down, left, and right navigation keys.

You can input a decimal point by pressing the

(Menu 7.6.4)

memo.

[Save] to save.

(Menu 7.6.5)

[Star] key.

Whenever you press the key, characters are sequentially deleted in reverse order.

Tip Calculator

This feature allows you to quickly and easily calculate the tip amount based on the total bill as well as the split of the total bill based on the number of people.

World Clock

The World clock function provides time information on major cities worldwide.

1. You can select a desired city as a base using

the left soft key [Map].

2. You can view the time of desired city using

the right soft key [Options] - [Change City].

Tasks

This feature allows you to save and manage a task.

1. To add a new To do item, select the left soft

key [New] in the Task enquiry screen.

2. Input due date, notes, priority and status for

the new Task.

3. Press the left soft key [Save] to save the

Task item.

(Menu 7.6.6)

(Menu 7.6.7)

(Menu 7.6.8)

Page 72

My Stuff

The following [Options] are available in the Task list.

] Status: Allows you to change the status of

the selected task as In Progress or Completed.

] Delete: Deletes the selected task. ] Send Via: Enables the selected task to be

sent via Message and Bluetooth.

] Edit: Allows you to edit a saved task. ] View Calendar: The calendar pop-up

window is displayed.

] Delete Tasks: Deletes All Completed, All

Past Tasks or All Tasks.

] Cancel: Allows you to exit the options

menu.

Stop Watch

(Menu 7.6.9)

This menu allows you to record the elapsed time of an event. The duration of an individual lap time (up to 20 times) and the total time can be displayed.

] New Time

1. To start timing, press the center key

[Start]. The running time is displayed as HH.MM.SS.hh (hours, minutes, seconds, hundredths of a second).

2. During the timing, you can record an

individual lap time by pressing the right soft key [Lap]. Up to 20 lap times can be recorded.

3. You can stop or restart timing by pressing

the key.

4. To reset the stop watch, press the left soft

key [Reset].

] Saved Times: You can see the saved

recorded times which are in the lap time list of the New Time option.

Unit Converter

(Menu 7.6.0)

This function converts any measurement into a unit you want.

There are 6 types of units that can be converted: Area, Length, Weight, Temperature, Volume, and Velocity.

n Note

You can input a decimal number by pressing the

[Star] key.

Date Finder

(Menu 7.6.*)

The date finder shows the start date, the target date and the number of remaining days.

Page 73

My Stuff

D-Day Counter

(Menu 7.6.#)

1. To add a new D-Day Counter item, select the

left soft key [New].

2. Input the Date and notes when you add an

item.

3. Press the left soft key [Save] to save the item.

] Edit: You can edit the selected item. ] Delete: You can delete the selected item. ] Show at Idle Screen: You can see the

Remaining days for this item (D-Day) on the Idle screen top right corner.

] Delete All: Deletes all saved items. ] Cancel: Allows you to exit the options

menu.

Camera & Recordings

Take Photo

(Menu 7.7.1)

Menu 7.7

Using the camera module built into your phone, you can take pictures of people or events while on the move. Additionally, you can send photos to other people in a picture message. The right soft key [Options] will bring up the following options.

] Photo Gallery: You can see saved images

files.

] Change to Video Mode: Go to the video

application, enables you to record a video clip.

] Video Share: You can make a Video Share

Call. For more details, refer to ‘Video Share Calling’ (page 27).

] Resolution: Sets the image size to

1600*1200(default), 1280*960, 640*480, 320*240 or 160*120. The selected image size appears on the capture screen.

] Quality: You can select the desired quality

of photo by selecting either Super Fine, Fine or Normal mode by using the navigation keys.

] Primary Storage: You can assign the

primary storage to Handset or Memory Card.

] Flash: You can set the flash when you take

a photo in dark place.

] Multishot: Allows you to take multishot

photos successively.

] Self Timer: Determines the camera timer. ] Advanced Settings

- White Balance: This adjusts the Light

Effect level and you can select from the following options: Auto / Daylight /

Page 74

My Stuff

Incandescent / Cloudy / Fluorescent / Night mode.

- Color Effects: Allows you to apply special

effects to the picture. Press the left or right navigation key to find the tone you want to use from the following options: Color, Sepia, Mono and Negative.

- Shutter Tones: Allows you to select a

sound when you press the shutter. Tone 1 / Tone 2 / Tone 3 /Off

] Default Settings: This restores the default

camera settings (Size, Brightness, Zoom, etc.).

n Note

In Take Photo mode, you can adjust the zoom scale by using the up/down navigation keys. The maximum zoom scale depends on the resolution as follows.

Resolution Zoom scale

1600*1200 Level 1

1280*960 Level 1

640*480 Level 1~Level 20

320*240 Level 1~Level 20

160*120 Level 1~Level 20

In Take Photo mode, you can adjust the brightness by using the left/right navigation key.

Note

• Zooming: You can zoom in/out using the

up/down navigation keys except 1600*1200 and 1280*960.

• Brightness: You can adjust the brightness

level of the screen using the left/right navigation keys and there are 9 level of setting.

Record Video

(Menu 7.7.2)

You can record a video clip in this menu by pressing the Camera key. Before starting to record, press the right soft key [Options] to set the following values. Select the desired value and press the key to confirm.

] Video Gallery: You can see saved video files. ] Change to Photo Mode: Go to the camera

application which enables you to take a still picture.

] Video Share: You can make a Video Share

Call. For more details, refer to ‘Video Share Calling’ (page 27).

] Video Record Mode: Sets the recording

mode to either MMS Video Mode, Video Share Mode and General Mode.

Page 75

My Stuff

] Quality: Determines the quality of a video clip. ] Primary Storage: You can assign the

primary storage to Handset or Memory Card.

] Flash: You can set the flash when you video

recording in dark place.

] White Balance: This adjusts the light

effect level and you can select from the following options: Auto / Daylight / Incandescent / Cloudy / Fluorescent/ Night mode.

] Color Effects: Allows you to apply special

effects to the video clip. Press the Left/Right Navigation Keys to find the tone you want to want to use from the following options: Color, Sepia, Mono and Negative.

] Default Settings: This restores the default

camera settings (Size, Brightness, Zoom, etc.).

n Note

In Video Record mode, you can adjust the zoom scale by using the up/down navigation keys. The maximum zoom scale depends on the resolution as follows.

Resolution Zoom scale

320*240 Level 1~Level 20

176*144 Level 1~Level 20

In Record Video mode, you can adjust the brightness by using the left/right navigation keys.

Record Voice

(Menu 7.7.3)

You can record an audio clip in this menu. The recorded audio file is saved automatically in the Audio & Ringtones menu (Menu 7.3).

The right soft key [Options] will bring up the following options.

] Record Mode: Sets the recording mode to

either MMS or General.

] Quality: Determines the quality of an audio clip. ] Primary Storage: You can set the primary

storage of the recorded audio to the Handset Memory or the memory Card.

] Cancel: Allows you to exit the options

menu.

Page 76

My Stuff

Other Files

When you receive files of an undefined format (such as .vcs, .vcf, etc.) via E-mail, the files are saved in this folder.

The following [Options] are available.

] Delete: You can delete the selected file. ] Rename: You can edit the name of the

selected file.

] New Folder: You can create a new folder. ] Sort By: You can sort the folders by name,

date and type.

] Delete All: You can delete all files. ] Multi Select: You can delete several files at

once.

] Information: You can view information

about the selected folder.

] Cancel: Allows you to exit the options

menu.

Memory Card

This function shows the status of the external microSD card memory.

Menu 7.8

Menu 7.9

Page 77

Address Book

Contact List

This menu allows you to save and manage contact address information. The Contacts’ functions allow you to add a new address or search saved contact addresses by name.

New Contact

This menu allows you to add a new contact address. You can enter contact address information including name, phone numbers, email addresses, group information items, memos, ring tones, and image (photograph).

You have to select the Handset or the SmartChip memory using the left and right navigation keys.

Caller Groups

This menu allows you to manage group information. By default, there are 4 groups: family, friends, colleagues and school. You can also configure a ring tone for a group so that the group ring tone sounds when a call from a specific contact address within that group arrives and there is no ring tone configured for the specific contact address.

Menu 8.1

Menu 8.2

Menu 8.3

Speed Dial List

This menu allows you to configure the speed dial numbers. You can select a number from 2 to 9 as a speed dial. You can configure speed dial numbers for any of the 8 numbers for a specific contact address so that a contact address may have multiple speed dial numbers.

Copy All Contacts

This menu allows you to copy all of the information from your SmartChip, e.g. name, handset number, etc., to your handset. If a name is duplicated during the copying operation, the information is also duplicated.

] SmartChip to Handset: You can copy the

entry from the SmartChip card to the phone memory.

] Handset to SmartChip: You can copy the

entry from the handset memory to the SmartChip card (not all the data will be copied).

Menu 8.4

Menu 8.5

Page 78

Address Book

Delete All Contacts

You can delete all entries in the SmartChip and the Handset.

Press the [END] key to return to standby mode.

Service Dial Numbers

You can view the list of Service Dialing Numbers (SDN) assigned by your network provider. Such numbers could include the emergency, directory assistance and voice mail numbers.

1. Select the Service dial number option.

2. The names of the available services will be

shown.

3. Use the up/down navigation keys to select a service. Press the [SEND] key.

My Business Card

This option allows you to make your own name card. Key in the Name, Mobile number, Home number, Work number, Fax number and E-mail address.

Menu 8.6

Menu 8.7

Menu 8.8

View Options

You can select different options by which to display names in your address book: Handset & Smartchip, Handset Only or Smartchip Only.

My Numbers

This displays your phone numbers stored in the SmartChip.

Menu 8.9

Menu 8.0

Page 79

Settings

Audio & Ringtones

There can be 4 sound modes: General, Vibrate All, Silent and Ear Mic. General, Vibrate, and All Silent modes can be changed from the Volume menu under Ring tone. In addition, pressing and holding the [Star] key on idle screen mode can swap Normal and Manner mode. Ear Mic is available when respective instruments are attached.

Shop Tones

Connects to AT&T Ring tone Shops.

Ringtones

Shows and plays ring tones. These can be downloaded ring tones from Ring tone shops.

Volume

This menu controls Ringtone, Key Tone, Call and Multimedia volume. It is available on Ring tone volume level 1~7, Vibrate All or Silent All.

Message Alert Tones

Allows you to select an alert tone which is played when a message is received. You can select any one from 10 message alert tones.

n Note

Full length music tracks cannot be set as ringtones.

(Menu 9.1.1)

(Menu 9.1.2)

(Menu 9.1.3)

Menu 9.1

(Menu 9.1.4)

Alert Type

Ringtones: Supports 3 ring alert types. Ring,

]

Ring and Vibration, and Ring after Vibration.

] Message Alert Tones: Supports 6 message

alert types. Ring Once, Ring Every 2 Min, Ring Every 15 Min, Ring & Vibrate, Vibrate, Silent.

] Other Alert Tones: You can elect to turn

Other Alert Tones Ring or Silent.

Key Tones

This menu option allows you to select a tone that the phone sounds when a key is pressed. You can select an option from Beep and

Voice.

Increasing Ringtone

Allows you to select an Increasing Ringtone type which is played when a incoming call. You can elect to turn this On or Off.

Power On/Off Tones

Allows you to select a Power On/Off tone. You can elect to turn them to be On or Off.

(Menu 9.1.5)

(Menu 9.1.6)

(Menu 9.1.7)

(Menu 9.1.8)

Page 80

Settings

Display

Shop Graphics

Connects to AT&T’s graphic download site.

Wallpapers

You can select the background picture in standby mode.

Backlight Timer

Use this to select whether or not the phone uses the backlight.

Brightness

You can set the brightness of display screen.

Menu Styles

You can configure the menu style to Icon style or List style.

Languages

You can change the language for the display text on your phone. This change will also affect the Language Input mode.

(Menu 9.2.1)

(Menu 9.2.2)

(Menu 9.2.3)

(Menu 9.2.4)

(Menu 9.2.5)

(Menu 9.2.6)

Menu 9.2

Dialing Fonts

You can configure the font size and color of the numbers which appear in the home screen when you make a call.

Clocks & Calendar

This feature allows you to select the internal LCD clock or Calendar display on the standby screen.

Color Schemes

You can change the color of the menu, soft key area, title bar area, and cursor by changing the Color Schemes.

You can select the Color Schemes from Black,

White, and Pink.

Bluetooth

Your phone has built-in Bluetooth wireless technology, which makes it possible for you to connect your phone wirelessly to other Bluetooth devices such as a hands free device, PC, PDA, a remote screen, or other phones. Only one of the devices registered in your phone can be connected at a time. (To make a connection to the same type of device or change Bluetooth preferences, disconnect the existing device first.)

(Menu 9.2.7)

(Menu 9.2.8)

(Menu 9.2.9)

Menu 9.3

Page 81

Settings

You can have a conversation via a cordless Bluetooth hands-free phone or browse the Internet, wirelessly connected via a mobile phone.

You can also exchange, for example, business cards, calendar items and pictures.

MobiTV or XMRadio is supported through Only Stereo Bluetooth.

Bluetooth A2DP Music Playing is available in the Music Player Menu.

Hands-free profile

This icon appears when the hands-free profile is used between the hands-free device and the phone. This allows you to call using a Bluetooth connection.

A2DP profile

This icon appears when the A2DP profile is used between the stereo headset device and the phone. This allows you to listen to an audio clip. A2DP is the Advanced Audio Distribution Profile, which provides support for streaming either mono or stereo audio using Bluetooth.

Hand-free +A2DP profile

This icon appears when both profiles of the hands-free and the A2DP are used between the compatible device and the phone. This allows you to call and listen to an audio clip using a Bluetooth connection.

For using each device, see a manual that comes with the device.

n Note

We recommend that your phone and the Bluetooth device you are communicating with be no more than 10 meters apart. The connection may be improved if there are no solid objects in between your phone and the other Bluetooth device.

Turn On/Off

This menu sets the Bluetooth on or off using the navigation key.

Search New Device

This function allows you to search and add new device at once.

Paired Devices

This function allows you to view the list of all devices that are paired with your phone at once.

(Menu 9.3.1)

(Menu 9.3.2)

(Menu 9.3.3)

Page 82

Settings

To add a new device, press the left soft key [New]

1. Select the [New] key to search the device that can be connected and which is within range.

2. If you want to stop searching, press the right soft key [Cancel].

3. All of the devices found are displayed in the pop-up menu.

Select the desired device by pressing the OK key, and entering the password.

Settings

(Menu 9.3.4)

This menu allows you to configure the profile for a Bluetooth.

] My Device Visibility

1. Selecting the Show option exposes your

phone to other Bluetooth devices.

2. Selecting Hide shows your phone only to

already paired devices.

] My Device Name: Allows you to change

the handset's name that can be seen by other Bluetooth devices.

] Supported Services: Shows you all

services that supports.

] My Address: You can check your Bluetooth

address. You cannot change the default setting.

] Primary Storage: You can assign the

primary storage to Handset or Memory

Card.

Date & Time

Set Date

This allows you to enter the day, month and year. You can change the date format via the Date Format menu option.

Date Format

MM/DD/YYYY(month/day/year)

DD/MM/YYYY(day/month/year)

YYYY/MM/DD(year/month/day)

Set Time

This allows you to enter the current time. You can choose the time format via the Time Format menu option.

Time Format

12 Hours/24 Hours

(Menu 9.4.1)

(Menu 9.4.2)

(Menu 9.4.3)

(Menu 9.4.4)

Menu 9.4

Page 83

Settings

Auto Update

Select On to set the phone to automatically update the time and date according to the current local time zone.

Call

Call Forwarding

When this network service is activated, you can direct your incoming calls to another number, for example, to your voice mailbox number. For details, contact your service provider. Select one of the divert options, for example, select If busy to divert voice calls when your number is busy or when you reject incoming calls.

The following options are available:

] All Voice Calls: Diverts voice calls

unconditionally.

] If Busy: Diverts voice calls when the phone

is in use.

] If No Answer: Diverts voice calls which you

do not answer.

] If Out of Reach: Diverts voice calls when

the phone is switched off or out of coverage.

(Menu 9.4.5)

Menu 9.5

(Menu 9.5.1)

] All Data Calls: Diverts to a number with a

PC connection unconditionally.

] All Fax Calls: Diverts to a number with a

fax connection unconditionally.

Send My Number

This network service allows you to set your phone number to be displayed On or hidden Off from the person you are calling. You can select Set by Network if you prefer to have different settings for different service providers.

Auto Redial

Select On, your phone redials the number you're trying to call up to 10 times after you hear a quick, engaged signal. Press [END] to stop the call attempts.

This feature attempts to redial numbers that are engaged due to the wireless network. It does not redial numbers to an engaged party.

n Note

There will be no alert indicating the call has been connected.

You must stay on the line to hear when the call is connected.

(Menu 9.5.2)

(Menu 9.5.3)

Page 84

Settings

Answer Mode

This allows you to determine how to answer the phone.

] Any Key: You can answer an incoming call

by pressing any key, except the [END] key.

] Send Key Only: You can only answer an

incoming call by pressing the [SEND] key.

] Slide Open: When the phone rings, you can

answer a call simply by opening the slide.

Minute Minder

This option allows you to specify whether the phone will beep every minute during an outgoing call to keep you informed of the length of the call.

Call Waiting

The network will notify you of a new incoming call while you have a call in progress. Select Activate to request the network to activate call waiting, Deactivate to request the network to deactivate call waiting, or View Status, to check if the function is active or not.

(Menu 9.5.4)

(Menu 9.5.5)

(Menu 9.5.6)

Call Reject

This menu allows you to enable or disable call reject for all numbers or a specific number.

] Call Reject On/Off: This feature allows you

to reject or not the incoming calls unconditionally by disconnecting. When the Reject All Calls option is set, all incoming calls are routed directly to Voicemail.

] Call Reject List: Configures conditional call

reject mode. Press the left soft key [New] to add the phone number to be rejected to the list. When you add a number to the list, you can add the number by entering it directly or by searching for the number in the Contact List.

(Menu 9.5.7)

Page 85

Settings

Menu User Feature

TTY Full

TTY+TALK For hearing-impaired can talk

TTY+HEAR For speech-impaired audible

TTY

For hearing- /

speech- impaired

TTY Off For regular users

(Menu 9.5.8)

Transmission/

Receiving Mode

text message transmission,

text message reception

voice transmission,

text message reception

text message transmission,

voice reception

voice transmission,

voice reception

Allows you to attach a TTY device enabling you to communicate with parties also using a TTY device. A phone with TTY support is able to translate typed characters to voice. Voice can also be translated into characters and then displayed on the TTY.

TTY mode (Tele Type writer)

TTY modes are as follows :

1. TTY Full:

- Users who cannot talk and hear send and receive a text message through TTY equipment.

When making communications

with a normal terminal

operator required

2. TTY Talk:

- Users who can talk but cannot hear receive a text message and send voice messages through TTY equipment.

3. TTY Hear:

- Users who can hear but cannot talk send a text message and receive voice messages through TTY equipment.

4. TTY Off:

- Normal users send and receive without TTY equipment.

Connecting TTY Equipment and a Terminal

1. Connect a TTY cable the TTY connection on

the terminal. (the TTY connection location is the same as a hands-free ear socket)

Page 86

Settings

2. Enter the phone menu and set up the desired

TTY mode. (For a TTY mode, see below)

3. After setting a TTY mode, check the LCD

screen of the phone for the TTY icon.

4. Connect the TTY equipment to the power

source and turn it on.

5. Make a phone connection to the desired

number.

6. When a connection is made, use the TTY

equipment to type in and send a text message or send a voice message.

7. The voice or text message from the receiver

end appears on the TTY equipment display.

Send DTMF Tones

You can send the DTMF (dual tone multifrequency) tones of the number on the display during a call.

This option is helpful for entering a password or account number when you call an automated system, like a banking service.

Video Share

Initial Notification

]

- On: If the Video Share Call service is

available and a voice call has been made, a pop-up window will be shown on the

(Menu 9.5.9)

(Menu 9.5.0)

screen to ask whether to make a Video Share Call or not.

- Off: No notification window is displayed

after the phone determines whether or not the Video Share call service is available.

] Auto Record

- On: Automatically starts recording Video

Share call images. You can view the recorded videos on [My stuff] – [Video].

- Off: Does not automatically start recording

video share call images.

] Service

- On: This option activates the Video Share

Call service.

- Off: If this option is selected, the Video

Share Call service will be unavailable even in a 3G service area. (If the service is Off, you will have to set it to On and restart the phone in order to reactivate the Video Share Call service).

Security

Various codes and passwords are used to protect the features and settings of your phone. They are described in the following sections.

Menu 9.6

Page 87

Settings

Auto Key Lock

(Menu 9.6.1)

This menu allows to set the time of Auto Keypad Lock.

n Note

You cannot make emergency calls under the key lock.

Lock Handset

(Menu 9.6.2)

You can use a security code to avoid unauthorized use of the phone.

If you set phone lock to When Power On, the phone will request a security code whenever you switch the phone on. If you set the phone lock to When SmartChip Changed, your phone will request a security code only when you change your SmartChip. If you set the phone lock to Immediately, your phone will lock immediately.

PIN Code Request

(Menu 9.6.3)

When the PIN code request feature is set to ‘On’, you must enter your PIN each time you switch the phone on. Consequently, any person who does not have your PIN cannot use your phone without your approval.

n Note

Before setting the PIN code request feature to Off, you must enter your PIN

The following [Options] are available:

] On: You must enter the PIN each time the

phone is switched on.

] Off: The phone connects directly to the

network when you switch it on.

Fixed Dial Number

(Menu 9.6.4)

This allows you to restrict your outgoing calls to selected phone numbers, if this function is supported by your SmartChip. The PIN2 code is required.

] FDN On/Off

- On: You can only call phone numbers

stored in the Address Book. You must enter your PIN2.

- Off: You can call any number.

] FDN List

n Note

Not all SmartChips have a PIN2. If your SmartChip does not, this menu option is not displayed.

Page 88

Settings

Change Codes

The Change codes feature allows you to change your current password to a new one. You must enter the current password before you can specify a new one.

You can change the access codes for: Security

Code, PIN1, PIN2

n Note

PIN: Personal Identification Number.

Connection

Network Profiles

This menu shows the Network Profile. You can add, delete and edit Network Profiles by using the Options Menu. However, you cannot delete or edit default configurations provided by AT&T.

USB Connection Mode

You can transfer files from a compatible PC to the memory in your phone using the Mass Storage. When you connect the phone to a PC using the USB cable, this will be displayed as a removable disk through Windows Explorer.

(Menu 9.6.5)

Menu 9.7

(Menu 9.7.1)

(Menu 9.7.2)

Flight Mode

This allows you to use only the phone’s features that do not require the use of the wireless network when you are in an airplane or in places where the wireless network is prevented.

If you set the flight mode on, the icon will be displayed on the screen instead of the network signal icon.

] On: You cannot make (or receive) any calls,

including emergency calls, or use other features that require network coverage.

] Off: You can deactivate the flight mode and

restart your handset to access the network.

Software Update

This menu is used to resume a postponed software update. If new software exists, the AT&T server notifies devices using a WAP push message. Before updating new software after downloading it from the AT&T server, you can decide whether you would like to postpone the operation. Reminder times can be set to 30 minutes, 1 hour, and 4 hours. When the time is up, you will be prompted again or you can resume the postponed operation using this menu at any time.

Menu 9.8

Menu 9.9

Page 89

Settings

Check Memory

Common

This function shows the status of the user memory of the handset.

Reserved

This function shows the status of the reserved memory for the user (Text Message, Contact List, Calendar, Tasks, Memo).

SmartChip

This function shows the status of the SmartChip card user memory.

Memory Card

If your phone has a multimedia memory card in the card slot, you can save images, sounds, and videos on the memory card. You can check the current status of the external memory card in the Memory status menu.

(Menu 9.0.1)

(Menu 9.0.2)

(Menu 9.0.3)

(Menu 9.0.4)

Handset Information

This menu is used to view My Numbers, Manufacturer and Model Name information etc.

Menu 9.0

Menu 9.*

Reset Settings

This function allows you to restore factory settings. To do this, you need the security code.

Master Reset

Restores the settings (e.g.: Audio, Display, Language, Date & Time, Bluetooth Settings) stored in the handset memory to default values.

Master Clear

Deletes downloaded/user created contents (e.g.: images, videos) from Handset content and the External Memory card.

] Handset

- Deletes all downloaded/user created Images, Videos & Sounds from the Handset Memory.

- Restores Personal Information stored in the handset memory (e.g.: address book, messages, tasks, alarm, Calendar schedules) to default values.

- Resetores the settings stored in the handset memory to default values.

] Memory Card: Deletes all contents from

the External Memory Card.

(Menu 9.#.1)

(Menu 9.#.2)

Menu 9.#

Page 90

Q&A

Please check to see if any problems you have encountered with the phone are described in this section before taking the phone in for a service or calling a service engineer.

Q How do I view the list of outgoing calls,

incoming calls and missed calls?

A Press the [SEND] key.

Q How do I view all numbers stored in the

memory?

A Press the down navigation key.

Q Why is the connection inconsistent or not

audible in certain areas?

A When the frequency environment is unstable

in a certain area, connection may be inconsistent and not audible. Relocate to another area and try again.

Q Why is the connection not consistent or

abruptly disconnects even when established?

A When frequency is unstable or weak or if

there are too many users, connection may be cut off even after it was established. Please try again later or attempt after relocating to other areas.

Q Why does the LCD not turn on? A Remove the battery and turn on the power

after placing it back in. If there is no change, fully charge the battery and try again.

Q Why is there an echo when a connection is

made with certain telephones in a certain area?

A This is called the ‘Echo Phenomenon’, which

occurs if the connection volume is too high or caused by special properties (semielectronic telephone exchange) of the equipment on the other end.

Q Why does the phone heat up? A The phone may get hot when there is a very

long call duration or when games are played or even when surfing the Internet for a long time. This has no effect upon the life of the product or performance.

Page 91

Q&A

Q Why does the battery life get shorter in

standby mode?

A The battery is worn out. As time passes, the

battery life gradually becomes shorter. If the battery lasts about half the amount of time as when first purchased, it’s time to purchase a new battery.

Q Why does the battery run out so quickly

during normal use?

A It is due to the user environment or a large

number of calls or a weak signal.

Q Why is no number dialed when you recall an

Address Book entry?

A Check that the number has been stored

correctly by using the Address book Search feature. Re-store them, if necessary.

Page 92

Accessories

There are a variety of accessories available for your mobile phone. You can select these options according to your personal communication requirements. Consult your local dealer for availability.

Travel Adapter

This adapter allows you to charge the battery. It supports standard U.S. 120 Volt 60Hz outlets.

It takes under 4 hours to charge a completely discharged battery.

Battery

Standard battery is available.

Vehicle Power Adapter

You can operate the phone and trickle charge the phone battery from your vehicle by using the vehicle power adapter.

It takes 5 hours to charge a completely discharged battery.

Page 93

Accessories

Stereo headset

Allows hands-free operation. Includes earpiece and microphone.

Data Cable Kit

* When installing, make sure to connect to the PC after your

phone and the cable have been connected. Otherwise, your PC may have a problem.

n Note

• Always use genuine LG accessories. Failure to do this may invalidate your warranty.

• Accessories may be different in different regions; please check with our regional service company or agent for further enquiries.

Page 94

Safety Guidelines

TIA Safety Information

Provided herein is the complete TIA Safety Information for Wireless Handheld phones. Inclusion of the text covering Pacemakers, Hearing Aids, and Other Medical Devices is required in the owner’s manual for CTIA Certification. Use of the remaining TIA language is encouraged when appropriate.

Exposure to Radio Frequency Signal

Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals.

In August, 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies:

ANSI C95.1 (1992) *

NCRP Report 86 (1986)

ICNIRP (1996)

Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard (C95.1).

* American National Standards Institute; National Council on Radiation Protection and Measurements; International Commission on Non-Ionizing Radiation Protection

The design of your phone complies with the FCC guidelines (and those standards).

Antenna Care

Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations.

Phone Operation

NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder.

Page 95

Safety Guidelines

Tips on Efficient Operation

For your phone to operate most efficiently:

] Do not touch the antenna unnecessarily

when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.

Driving

Check the laws and regulations on the use of wireless phones in the areas where you drive. Always obey them. Also, if using your phone while driving, please:

] Give full attention to driving - driving safely

is your first responsibility;

] Use hands-free operation, if available;

] Pull off the road and park before making or

answering a call if driving conditions so require.

Electronic Devices

Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.

Pacemakers

The Health Industry Manufacturers Association recommends that a minimum separation of six (6’) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.

Persons with pacemakers:

] Should ALWAYS keep the phone more than

six inches from their pacemaker when the phone is turned ON;

] Should not carry the phone in a breast

pocket.

] Should use the ear opposite the pacemaker

to minimize the potential for interference.

] If you have any reason to suspect that

interference is taking place, turn your phone OFF immediately.

Hearing Aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider.

Page 96

Safety Guidelines

Other Medical Devices

If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.

Health Care Facilities

Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may use equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle.

You should also consult the manufacturer of any equipment that has been added to your vehicle.

Posted Facilities

Turn your phone OFF in any facility where posted notices so require.

Aircraft

FCC regulations prohibit using your phone while in the air. Turn your phone OFF before boarding an aircraft.

Blasting Areas

To avoid interfering with blasting operations, turn your phone OFF when in a ‘blasting areas or in areas posted: ‘Turn off two-way radio’. Obey all signs and instructions.

Potentially Explosive Atmosphere

Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

Areas with a potentially explosive atmosphere are often, but not always, marked clearly. Potential areas may include: fueling areas (such as gasoline stations); below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles (such as grain, dust, or metal powders); and any other

Page 97

Safety Guidelines

area where you would normally be advised to turn off your vehicle engine.

For Vehicles Equipped with an Air Bag

An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Safety Information

Please read and observe the following information for safe and proper use of your phone and to prevent damage. Also, keep the user guide in an accessible place at all the times after reading it.

] Do not disassemble or open crush, bend or

deform, puncture or shred.

] Do not modify or remanufacture, attempt to

insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard.

] Only use the battery for the system for which

it is specified.

] Only use the battery with a charging system

that has been qualified with the system per IEEE-Std- 1725-2006. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard.

] Do not short circuit a battery or allow

metallic conductive objects to contact battery terminals.

] Replace the battery only with another battery

that has been qualified with the system per this standard, IEEE-Std-1725-2006. Use of an unqualified battery may present a risk of fire, explosion, leakage or other hazard.

] Promptly dispose of used batteries in

accordance with local regulations.

] Battery usage by children should be

supervised.

] Avoid dropping the phone or battery. If the

phone or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection.

] At least, one of the Authentication methods

may be implemented. (e.g. H/W, S/W, Mechanical, Hologram, etc.)

] Improper battery use may result in a fire,

explosion or other hazard.

Page 98

Safety Guidelines

Charger and Adapter Safety

] The charger and adapter are intended for

indoor use only.

Battery Information and Care

] Please dispose of your battery properly or

take it to your local wireless carrier for recycling.

] The battery does not need to be fully

discharged before recharging.

] Use only LG-approved chargers specific to

your phone model since they are designed to maximize battery life.

] Do not disassemble or impact the battery as

it may cause electric shock, short-circuit, and fire. Store the battery in a place out of reach of children.

] Keep the battery’s metal contacts clean.

] Replace the battery when it no longer

provides acceptable performance. The battery can be recharged several hundred times before replacement.

] Recharge the battery after long periods of

non-use to maximize battery life.

] Battery life will vary due to usage patterns

and environmental conditions.

] Use of extended backlighting, MEdia Net

Browsing, and data connectivity kits affect battery life and talk/standby times.

] The self-protection function of the battery

cuts the power of the phone when its operation is in an abnormal state. In this case, remove the battery from the phone, reinstall it, and turn the phone on.

Explosion, Shock, and Fire Hazards

] Do not put your phone in a place subject to

excessive dust and keep the minimum required distance between the power cord and heat sources.

] Unplug the power cord prior to cleaning your

phone, and clean the power plug pin when it is dirty.

] When using the power plug, ensure that it is

firmly connected. If it is not, it may cause excessive heat or fire.

] If you put your phone in a pocket or bag

without covering the receptacle of the phone (power plug pin), metallic articles (such as a coin, paperclip or pen) may short-circuit the phone. Always cover the receptacle when not in use.

Page 99

Safety Guidelines

] Do not short-circuit the battery. Metallic

articles such as a coin, paperclip or pen in your pocket or bag may short-circuit the + and – terminals of the battery (metal strips on the battery) upon moving. Short-circuit of the terminal may damage the battery and cause an explosion.

General Notice

] Using a damaged battery or placing a battery

in your mouth may cause serious injury.

] Do not place items containing magnetic

components such as a credit card, phone card, bank book or subway ticket near your phone. The magnetism of the phone may damage the data stored in the magnetic strip.

] Talking on your phone for a long period of

time may reduce call quality due to heat generated during use.

] When the phone is not used for a long

period time, store it in a safe place with the power cord unplugged.

] Using the phone in proximity to receiving

equipment (i.e., TV or radio) may cause interference to the phone.

] Do not use the phone if the antenna is

damaged. If a damaged antenna contacts skin, it may cause a slight burn. Please contact an LG Authorized Service Centre to replace the damaged antenna.

] Do not immerse your phone in water. If this

happens, turn it off immediately and remove the battery. If the phone does not work, take it to an LG Authorized Service Centre.

] Do not paint your phone.

] The data saved in your phone might be

deleted due to careless use, repair of the phone, or upgrade of the software. Please backup your important phone numbers. (Ring tones, text messages, voice messages, pictures, and videos could also be deleted.) The manufacturer is not liable for damage due to the loss of data.

] When you use the phone in public places,

set the ring tone to vibration so as not to disturb others.

] Do not turn your phone on or off when

putting it in your ear.

Page 100

Safety Guidelines

FDA Consumer Update

The U.S. Food and Drug Administration Centre for Devices and Radiological Health Consumer Update on Mobile Phones.

1. Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radio frequency(RF) energy in the microwave range while being used. They also emit very low levels of RF when in the standby mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.

2. What is the FDA’s role concerning the safety of wireless phones?

Under the law, the FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radio frequency(RF) energy at a level that is hazardous to the user. In such a case, the FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace, or recall the phones so that the hazard no longer exists.

Although the existing scientific data do not justify FDA regulatory actions, the FDA has urged the wireless phone industry to take a number of steps, including the following:

] Support needed research into possible

biological effects of RF of the type emitted by wireless phones;

] Design wireless phones in a way that

minimizes any RF exposure to the user that is not necessary for device function; and

] Cooperate in providing users of wireless

phones with the best possible information

LG Shine User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual