LG SH92SB-S User Manual
HT902SB-R1.NA1ULLA_ENG_MFL34656568
DVD RECEIVER
OWNER’S MANUAL
MODEL: LHT754
Main Unit - LHT754
Speakers - SH92SB-S
SH92SB-C
SH92SB-W
Before connecting, operating or adjusting this product, please
read this instruction booklet carefully and completely.
R
For service/
support Call:
Toll Free Number
1-800-243-0000
© Copyright 2007, LG Electronics U.S.A., Inc.
2
This lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
WARNING: Do not install this equipment in a confined space
such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect
it from overheating.
The openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface. This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
the manufacturer's instruction have been adhered to.
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future reference.
Should the unit require maintenance, contact an authorized
service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as vases, should be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances should be placed on a dedicated
circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch
circuits. Check the specification page of this owner's
manual to be certain.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug
it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an
authorized servicer.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance.
To disconnect power from the unit, unplug the unit from
the outlet. When installing the product, ensure that the
plug is easily accessible.
FCC WARNING: This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the
modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is
made.
REGULATORY INFORMATION: FCC Part 15
This epuipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
product is operated in a residential installation. This product
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
product does cause harmful interference to radio or
television reception, which can be determined by turning the
product off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and
receiver.
• Connect the product into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
FCC COMPLIANCE: The responsible party for this product’s
compliance is:
Marketed and Distributed by LG Electronics U.S.A., Inc.,
1000 Sylvan Avenue, Englewood Cliffs, NJ.
Phone: 1-201-816-2000.
CLASS 1 LASER PRODUCT
KLASSE 1
LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT LASER
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
3
Introduction
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions. - All these safety and
operating instructions should be read before the
product is operated.
2. Keep these instructions. - The safety, operating and
use instructions should be retained for future
reference.
3. Heed all warnings. - All warnings on the product and
in the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use
instructions should be followed.
5. Do not use this apparatus near water. – For
example: near a bath tub, wash bowl, kitchen sink,
laundry tub, in a wet basement; or near a swimming
pool; and other areas located near water.
6. Clean only with dry cloth. – Unplug this product
from the wall outlet before cleaning. Do not use liquid
cleaners.
7.
Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions. -
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over-heating. The
openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s
instructions have been adhered to.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S
MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE
REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following
procedures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
4
Introduction
Maintenance and Service . . . . . . . . . . . . . . . . .4
Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Front Panel/Rear Panel . . . . . . . . . . . . . . . . . . .6
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .7
Installation and Setup
TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . .8
Optional Equipment Connection . . . . . . . . . . . .9
USB connection . . . . . . . . . . . . . . . . . . . . . . .9
AUX IN connection . . . . . . . . . . . . . . . . . . . . .9
OPTICAL IN connection . . . . . . . . . . . . . . . . .9
AUDIO IN connection . . . . . . . . . . . . . . . . . . .9
iPod connection . . . . . . . . . . . . . . . . . . . . . . . .9
Antenna Connection . . . . . . . . . . . . . . . . . . . .10
Speaker System Connection . . . . . . . . . . . . . .10
HDMI Connection . . . . . . . . . . . . . . . . . . . . . .11
Displaying Disc Information on-screen . . . . . .12
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . .12
General Operation . . . . . . . . . . . . . . . . . . . .12-14
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . .12
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
5.1 Speaker Setup . . . . . . . . . . . . . . . . . . . . .13
LOCK (Parental Control) . . . . . . . . . . . . . . . .14
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Operation
General features . . . . . . . . . . . . . . . . . . . . . . .15
Additional features . . . . . . . . . . . . . . . . . . . . .16
Playing an Audio CD or MP3/WMA file . . . . . .17
Programmed Playback . . . . . . . . . . . . . . . . . .17
Viewing a JPEG file . . . . . . . . . . . . . . . . . . . .18
Playing a DivX Movie file . . . . . . . . . . . . . . . .19
Using iPod . . . . . . . . . . . . . . . . . . . . . . . . .20-21
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . . .22
Presetting the Radio Stations . . . . . . . . . . . . .23
Listening to the Radio . . . . . . . . . . . . . . . . . . .23
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . .24
Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Selecting input source . . . . . . . . . . . . . . . . . . .24
XTS/XTS pro . . . . . . . . . . . . . . . . . . . . . . . . . . .24
VIRTUAL sound . . . . . . . . . . . . . . . . . . . . . . . .24
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .24
XM Satellite Radio Operation . . . . . . . . . . .25-26
Controlling your TV with the Suppllied
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .27
Controlling other TVs with the Supplied
Remote Control . . . . . . . . . . . . . . . . . . . . . .27-28
Reference
Language Codes . . . . . . . . . . . . . . . . . . . . . . .29
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Troubleshooting . . . . . . . . . . . . . . . . . . . . .30-31
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .32
Maintenance and Service
Refer to the information in this chapter before
contacting a service technician.
Handling the unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping the exterior surfaces clean
Do not use volatile liquids such as insecticide spray
near the unit.
Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The DVD/CD Receiver is a high-tech, precision
device. If the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality could be
diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service center.
What is SIMPLINK?
Some functions of this unit are controlled by TV’s
remote control when this unit and LG TV with
SIMPLINK are connected through HDMI
connection.
• Controllable functions by LG TV’s remote control;
Play, Pause, Scan, Skip, Stop, Power Off,
etc.
• Refer to the TV owner’s manual for the details of
SIMPLINK function.
• LG TV with SIMPLINK function has the logo as
shown above.
5
Before use
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future
reference.
This manual provides information on the operation
and maintenance of your DVD/CD Receiver. Should
the unit require service, contact an authorized service
location.
About the Symbol Display
“ ” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
DVD video disc.
Symbol Used in this Manual
Note:
Indicates special notes and operating features.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols
is applicable only to the disc represented by the
symbol.
DVD
Audio CDs
MP3 files
WMA files
JPEG files
DivX files
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished
works. Copyright 1992-1997 Dolby Laboratories. All rights
reserved.
Manufactured under license from Digital Theater Systems,
Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and other U.S. and worldwide patents issued and pending. "DTS" and "DTS Digital
Surround” are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2003 Digital Theater
Systems, Inc. All Rights Reserved.
Types of Playable Discs
DVD
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play a DVD±R, DVD±RW,
and CD-R or CD-RW that contains audio titles, MP3,
WMA, JPEG or DivX files.
Notes:
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD-RW,
DVD+RW) disc itself, some CD-R/RW (or DVD-RW,
DVD+RW) discs may not be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heartshaped
or octagonal). It may result in malfunctions.
Regional Code
This unit has a regional code printed on the rear of the
unit. This unit can play only DVD discs labelled as the
same as the rear of the unit or “ALL”.
Notes on Regional Codes
Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your DVD player’s regional
code or the disc cannot play.
If you try to play a DVD with a different regional
code from your player, the message “Check
Regional Code” appears on the TV screen.
Remote Control Operation Range
Point the Remote Control at the Remote Sensor and press
the buttons.
Distance: About 23 ft (7 m) from the front of the Remote
Sensor
Angle: About 30° in each direction in front of the Remote
Sensor
Remote Control battery installation
Remove the battery cover on the rear of
the Remote Control, and insert two R06
(size AA) batteries with and
aligned correctly.
DivX
JPEG
WMA
MP3
ACD
DVD
Introduction
Introduction
6
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause
permanent damage to the unit.
Wireless transmitter receiver kit not supplied. We urge you to purchase such a kit to avoid
cumbersome wires running front to back on the floor.
HDMI OUT
OUT PUT
INPUT
L - AUX - R
MONITOR
YPB PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
XM IN
i Pod
FM Antenna connector
AM Loop Antenna connectors
SPEAKER connectors
Power Cord
MONITOR OUT connector
COMPONENT VIDEO OUT terminals
Connect to a TV with Y P
B PR inputs.
Front Panel/Rear Panel
Cooling fan
OPTICAL IN connector
AUX AUDIO Input
(L/R) connector
HDMI OUT
HDMI output providing a high quality interface for digital audio and video.
OPEN/CLOSE button
TUNING(-/+)/SKIP/
SEARCH(../>>)
Remote Sensor
AUDIO IN connector
VOLUME controller
POWER
DISPLAY Window
DISC Tray
USB port
Connect to a USB port of a memory
device (USB memory etc.)
FUNC.(-)/PLAY(B)
Press and hold down this button
about 3 seconds, then press
repeatedly to select other function.
PAUSE (XX)/
MONO/STEREO (ST.)
STOP (x)
TRANSMITTER (DC 7V OUT)
Connect a wireless transmitter.
iPod Connector
Connect a dock connector of iPod. (Sold separately.)
XM IN Connector
Connect an XM Passport System
to this terminal. (sold separately.)
7
Introduction
Remote Control
OPEN/CLOSE (ZZ)
Opens and closes
the disc tray.
DVD
Selects the output source (CD/DVD).
iPod
Selects the iPod source.
S-TITLE
Selects a subtitle language (DVD).
CLEAR
Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
MARKER
Marks a point during playback.
SEARCH
Displays MARKER SEARCH menu.
SCAN/SLOW(bb/BB)
Searches backward or forward.
Reverse/Forward slow playback.
SKIP (../>>)
Moves to the previous or next
chapter or track.
TITLE
Displays the disc’s Title menu, if
available.
STOP (xx), PLAY (B)
PAUSE/STEP (XX)
VSM
XTS pro
Supplies more natural and realistic
sound.
Supplies great sound effect.
SLEEP
Sets the System to turn off
automatically at a specified time.
MUTE
Turns the sound on and off
temporarily.
VOLUME (-/+)
Adjusts speaker volume.
XM MODE
Selects a XM display mode.
RESOL.
Changes the resolution depending on
your TV.
PROG./MEMO.
Accesses or removes Program menu.
Enter a radio station’s frequency into
the tuner.
TV Control Buttons
- POWER: Switches TV ON and
OFF.
- CHANNEL v/V: Selects TV’s
channel.
- VOLUME +/–: Adjusts TV’s
volume.
- INPUT: Selects the TV’s source.
POWER
TUNER
Selects the System’s tuner (FM ,AM and
XM bands).
AUX
Selects input source.
USB
Plays the multimedia files.
DIMMER
Changes brightness of the display
window on the front panel during in
power-on status.
AUDIO
Selects an audio language (DVD) or an
audio channel (CD).
SOUND
Selects the sound mode.
REPEAT
Repeats chapter, track, title, all
REPEAT A-B
Repeats sequence.
MENU
Accesses the menu on a DVD disc.
ZOOM
Enlargres video image.
SETUP
Accesses or removes setup menu.
DISPLAY
Accesses On-Screen display.
RETURN
Removes the menu.
b/B/v/V (left/right/up/down)
Selects an option in the menu.
ENTER
Acknowledges the menu selection.
PRESET (-/+)
Selects programme of Radio.
XM CH (-/+)
Tunes in the desired XM station.
TUN. (-/+)
Tunes in the desired radio station.
0-9 numerical buttons
Selects a service, program number
directly or selects numbered options in
a menu.
CAT
Selects the Category Search.
HDMI
Switches the HDMI mode to HDMI
(active) and OFF (inactive).
TUNER
POWER
AUX
USB
DIMMER
SOUND S-TITLE CLEAR
AUDIO
REPEAT
REPEAT A-B
SCAN +
TITLE
MENU
XM CH
ZOOM
CAT/HDMI
POWER
INPUT
SKIP
STOP PLAY
SETUP
ENTER
SLEEP
MUTE
CHANNEL VOL
OPEN/CLOSE
DVD
iPod
MARKER SEARCH
SCAN +
PAUSE/STEP
DISPLAY
RETURN
XM CH
VOL
XM MODE/RESOL.
PROG./MEMO.
8
Make one of the following connections, depending on
the capabilities of your existing equipment.
Tips:
Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the
DVD/CD Receiver
. Use one of the
connections described below.
Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
make the best connections.
Caution:
Make sure the DVD/CD Receiver is connected
directly to the TV. Select the correct AV input on
your TV.
Do not connect your
DVD/CD Receiver
to the TV
via your VCR. The DVD image could be distorted
by the copy protection system.
Video connection
Connect the MONITOR OUT jack from the DVD/CD
Receiver to the VIDEO IN jack on the TV using the
video cable supplied (V).
Component Video (Color Stream®) connection
Connect the COMPONENT VIDEO OUT jacks from
the DVD/CD Receiver to the corresponding jacks on
the TV using a Y P
B PR cable (C).
If your television is a high-definition or “digital
ready” television, you may take advantage of the
DVD/CD Receiver
’s progressive scan output for the
highest video resolution.
If your TV does not accept your resolution setting,
abnormal picture appears on the screen. Please
read owner’s manual for TV then set the resolution
that your TV can accept.
Note:
The HDMI mode must be set to OFF for VIDEO OUT
and Component video connections.
TV Connection
Installation and Setup
HDMI OUT
Rear of DVD/CD Receiver
Rear of TV
VC
INPUT
MONITOR
L - AUX - R
YPB PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
VIDEO
COMPONENT VIDEO /
INPUT
PROGRESSIVE SCAN INPUT
L
Y
XM IN
i Pod
9
Optional Equipment
Connection
USB connection (U)
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
Removing the USB Device from the unit
1. Choose a different function mode or press STOP
(x) twice in a row.
2. Remove the USB device from the unit.
Notes:
Don’t extract the USB device while operating.
Music files (MP3/WMA), image files (JPEG) and
video files can be played.
This unit cannot use a USB HUB.
Recommended Memory Cards.
Compact Flash Card (CFC), Micro Drive (MD), Smart
Media Card (SMC), Memory Stick (MS), Secure Digital
Card (SD), Multimedia Card (MMC), Memory Stick Pro
(MS-Pro)
- Compatible with: FAT16, FAT32
- Only use the memory cards recommended.
Devices which require additional program
installation when you have connected the unit to a
computer are not supported.
In case of a USB HDD, make sure to connect an
auxiliary power cord to the USB HDD for proper
operation. Up to four primary partitions of a drive are
supported. If there is an extension partition, it will not
be supported.
If the drive of USB device is two or more, a drive
folder is displayed on the screen. If you want to
move to the initial menu after you select a folder,
press RETURN.
Digital cameras and mobile phones are not
supported.
AUX IN connection (A)
Connect a Output of auxiliary device to the AUX
AUDIO Input (L/R) Connector.
OPTICAL IN connection (O)
Connect an optical output of DVD Player (or Digital
Device etc) to the OPTICAL IN connector.
AUDIO IN connection (D)
Connect a output of portable device (MP3 or PMP etc)
to the AUDIO input connector.
iPod connection
Connect the iPod connector on the rear of the DVD/
CD Receiver to the dock connector of iPod using an
iPod cable (I).
Notes:
Depending on the type of iPod, you may need to
insert one of the dock adapters into the dock slot
before you station your iPod.
Adjust the volume to a moderate level before you
connect your iPod and this unit.
Installation and Setup
VIDEO
OUT IN
AUDIO (L)
AUDIO (R)
OPTICAL
OUT
HDMI OUT
OUT PUT
INPUT
L - AUX - R
MONITOR
YPB PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
XM IN
i Pod
Rear of DVD/CD Receiver
U
O
A
Auxiliary device
DVD Player
(or Digital
Device, etc)
USB Memory, MP3 Player (or
Memory Card Reader, etc.)
To AUDIO OUT (L/R)
To AV IN AUDIO (L/R)
D
Portable device
To AUDIO OUT
To AUDIO IN
HDMI OUT
I
iPod
Rear of DVD/CD Receiver
INPUT
MONITOR
L - AUX - R
YPB PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
XM IN
i Pod
10
Antenna Connection
Connect the supplied FM/AM antenna for listening to
the radio.
Connect the AM Loop antenna to the AM antenna
connector.
Connect the FM Wire antenna to the FM antenna
connector.
Notes:
To prevent noise pickup, keep the AM Loop antenna away
from the DVD/CD Receiver and other components.
Be sure to fully extend the FM wire antenna.
After connecting the FM Wire antenna, keep it as
horizontal as possible.
Speaker System Connection
Connect the speakers using the supplied speaker
wires.
To obtain the best possible surround sound, adjust the
speaker parameters (volume, distance, etc.).
Notes:
Be sure to match the speaker wire to the
appropriate terminal on the components: + to + and
– to –. If the cables are reversed, the sound will be
distorted and will lack bass.
If you use front speakers with low maximum input
rating, adjust the volume carefully to avoid
excessive output on the speakers.
Front speaker
(Right)
Front speaker
(Left)
Rear speaker
(Right surround)
Rear speaker
(Left surround)
Subwoofer
Center speaker
HDMI OUT
AM Loop Antenna
(supplied)
FM Wire Antenna
(supplied)
INPUT
MONITOR
L - AUX - R
XM IN
YPB PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
i Pod
Loading...