LG SH7 User's Guide

SIMPLE MANUAL

ENGLISH

DEUTSCH

FRANÇAIS

SH7

SMART Hi-Fi
AUDIO

Wireless Multi-room Sound Bar

To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.

NEDERLANDS SLOVENŠČINA

ITALIANO ESPAÑOL

ΕΛΛΗΝΙΚΑ

PORTUGUÊS

MODEL
SH7

*MFL69981180*

www.lg.com

Copyright © 2017 LG Electronics. All Rights Reserved

Front Panel

LED indicator

The buttons are located on the rear.

1/! ·······························Standby / On

F ································Selects function

-/+ ·······························Adjusts volume

····················Connects wireless network.

···· Adds the additional MUSICow product to

your network. (In case that one or more MUSICow

product is connected.)

LED indicator: Shows connection status.

• White (blinking): waiting for network connection

• White (staying on): network connection is

completed.

• White (Dimmed): standby mode with network
connection.

• Green(stayingon):therstgroupwasset.

• Red (staying on): standby mode without network

connection

Rear Panel

LAN

HDMI OUT

HDMI IN

(TV ARC)

DC IN ·····················Connect to AC Adapter.
OPTICAL IN ···········Connect to an optical device
PORTABLE IN ············Connect portable device.
USB (Service only) ······S/W download connector.
HDMI IN ·······Connect to device with HDMI OUT.
HDMI OUT (TV ARC) ············· Connect to a TV.
LAN···························· Connect to router.

Subwoofer Connection

Place the wireless subwoofer near the speaker and
follow steps below.

a Connect the power cord of wireless subwoofer to

the outlet.

b Turn on the main unit. :

The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's green
LED turns on.

Subwoofer Connection Manually

a Reset the Subwoofer

If the green LED on the subwoofer blinks quickly,
skip this step and go to b

• Press and hold Paring button for 5 seconds.

• The LED lights up alternately in red and green.

• Plug out the power cord. After the LED turns

off completely, plug in the power cord again.

When the reset is completed, the subwoofer's green
LED blinks quickly.

b Reset the sound bar

• Adjust volume to minimum. "MIN" appears on
display window.

• Press and hold
remote control for 5 seconds. "SUB - WF
RESET" appears on display window.

• Turn the sound bar’s power off and on while
the subwoofer’s green LED blinks.

When the connection is completed, you can see the
green LED on the subwoofer.

Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1m to prevent wireless
interference.

(Mute) button on the

>1m