LG SH4 User Guide

SIMPLE MANUAL

Wireless
Sound Bar

ENGLISH FRANÇAIS PORTUGUÊS

To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.

MODEL
SH4

*MFL69586978*

www.lg.com

Front Panel

The buttons are located on the rear.

··································Standby / On

·······························Selects Function

·························Adjusts Volume

Rear Panel

OPTICAL IN · · · · · · · · · · · Connect to an Optical device
PORTABLE IN ········ Connect to a Portable device
USB port ················· Connect to a USB device
HDMI IN ········· Connect to HDMI out on a device
HDMI OUT (TV ARC) ·············· Connect to a TV

Subwoofer Connection1

Place the wireless subwoofer near the speaker and
follow steps below.

a Connect the power cord of wireless subwoofer

to the outlet.

b Turn on the main unit. :

The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
green LED turns on.

Subwoofer Connection Manually

a Reset the Subwoofer

If the green LED on the subwoofer blinks quickly,
skip this step and go to b

• Press and hold Pairing button for 5 seconds.

• The LED lights up alternately in red and green.

• Plug out the power cord. After the LED turns

off completely, plug in the power cord again.

When the reset is completed, the subwoofer's green
LED blinks quickly.

b Reset the sound bar

• Adjust volume to minimum until the red LED
on the sound bar lights up for a while.

• Press and hold (Mute) button on the
remote control for 3 seconds.

• The red LED on the sound bar blinks quickly

• Turn the sound bar’s power off and on while

the subwoofer’s green LED blinks.

When the connection is completed, you can see the
green LED on the subwoofer.

Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1m to prevent wireless
interference.

>1m