LG SB19ST User guide

OWNER’S MANUAL

STYLISH
PORTABLE
BOOM BOX

ENGLISH

Please read this manual carefully before operating
your set and retain it for future reference.

SB19ST

www.lg.com

CP2540-FB_ARUSLLK_ENG.indd 1 2014-05-23  12:17:20

1 Getting Started

Getting Started2

Safety Information

1

Getting Started

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

enclosure that may be of sucient magnitude to
constitute a risk of electric shock to persons.

instructions in the literature accompanying the
product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.

CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.

WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built­in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s

The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)

CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specied herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon
a dedicated circuit;

That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.

NOTICE : The main label is attached on the exterior
of the bottom of the apparatus. Refer to the label
attached on the bottom of the unit.

CP2540-FB_ARUSLLK_ENG.indd 2 2014-05-23  12:17:21

Getting Started 3

This device is equipped with a portable battery or
accumulator.

Safety way to remove the battery or the
battery from the equipment: Remove the

old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.

Disposal of your old appliance

1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by the
European Directive 2002/96/EC.

2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.

3. The correct disposal of your old
appliance will help prevent potential
negative consequences for the
environment and human health.

4. For more detailed information about
disposal of your old appliance,
please contact your city oce, waste
disposal service or the shop where
you purchased the product.

Disposal of waste batteries/accumulators

1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product
it means they are covered by
European Directive 2006/66/EC.

2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury,0.002% of cadmium or

0.004% of lead.

3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or
the local authorities.

4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.

5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.

1

Getting Started

CP2540-FB_ARUSLLK_ENG.indd 3 2014-05-23  12:17:22

Table of Contents4

Table of Contents

1 Getting Started

2 Safety Information

6 Unique Features

6 Accessories

6 Playable file Requirement

7 Front panel

2 Connecting

8 Power Source

8 – Battery Installation

8 – AC Power Cord Connection

9 Other Equipment Connection

9 – USB Connection

9 – Removing the USB Device from the

unit

9 – Compatible USB Devices

9 – USB device requirement

9 – PORT. IN Connection

CP2540-FB_ARUSLLK_ENG.indd 4 2014-05-23  12:17:22

Table of Contents 5

3 System Setting

10 Basic Operations

11 Other Operations

11 Radio Operations

11 – Listening to the radio

11 – To turn off the radio

4 Operating

12 Using a Bluetooth wireless technology

12 – Listening to music stored on the

Bluetooth devices

5 Troubleshooting

14 Troubleshooting

6 Appendix

15 Specifications

16 Maintenance

16 – Handling the Unit

16 – Notes on Discs

17 Trademarks and Licenses

1

2

3

4

5

CP2540-FB_ARUSLLK_ENG.indd 5 2014-05-23  12:17:22

6

Getting Started6

Unique Features

Radio

1

Getting Started

Listens to the radio.

Portable In

Listens to music from your portable device.

Bluetooth®

Enjoys music from Bluetooth device with simple

connection.

Accessories

Please check and identify the supplied accessories.

AC Power cable (1)

Playable file
Requirement

MP3/ WMA music le requirement:

MP3/ WMA le compatibility with this unit is limited
as follows :

ySampling frequency : between 8 to 48 kHz (MP3),

within 8 to 48kHz (WMA)

yBit rate : between 32 to 384 kbps (MP3),

32 to 384 kbps (WMA)

yMaximum les : Under 999

yFile extensions : “.mp3”/ “.wma”

yCD-ROM le format : ISO 9660/ JOLIET

yWe recommend that you use Easy-CD creator,

which creates an ISO 9660 le system.

yYou have to set the disc format option to

[Mastered] in order to make the discs compatible
with the LG players when formatting rewritable
discs. When setting the option to Live System,
you cannot use it on LG player. (Mastered/Live
File System : Disc format system for windows
Vista)

CP2540-FB_ARUSLLK_ENG.indd 6 2014-05-23  12:17:22

Front panel

Getting Started 7

a
b
c

d

e

f

Antenna

a

PORT.IN

b

The player can be used to play the music from
many types of portable player.

FUNCTION switch

c

Changes the function.
Turn o the unit.

VOL (-/+)

d

Volume control.

Disc Door

e

Speaker

f

Handle

g

TUNING (-/+) DIAL

h

REPEAT

i

You can enjoy the music repeatedly or
randomly.

PROG.
Plays back tracks in any order
USB/CD

Selects the USB/ CD function.

Starts or pauses playback.

d/M

Stop

Z
C/V
ws

When a CD/ USB containing MP3/ WMA les in
several folders is being played, press it to select
the folder you want to play.

USB Connector
BASS BLAST

Reinforces the treble, bass and surround eect.

DISPLAY WINDOW

j

(Only CD/USB)

Skip/ search

Search for a folder of MP3/ WMA les.

g

h

f

i

j

1

Getting Started

CP2540-FB_ARUSLLK_ENG.indd 7 2014-05-23  12:17:23

Connecting8

Power Source

2

Connecting

Battery Installation

1. Press and open the battery cover.

2. Put six “C” (R14) batteries (not supplied) into
the compartment making sure the 2 and 3
should be correctly positioned.

3. Replace the battery cover.

AC Power Cord Connection

1. Connect one end of the AC power cord

(included) to the AC IN socket.

2. Plug the other end into the wall outlet.

Note

,

yUnplug the AC power cord from the wall

outlet if you do not to use for an extended
period of time.

yTo avoid damage from possible battery

leakage, remove the batteries if you do not
plan to use the unit for an extended period
of time.

yWhen the batteries are weak, replace all the

batteries with new ones.

yWhile the AC power cord connect to the

wall outlet, the batteries are not worn out.

yBatteries (battery pack or batteries installed)

shall not be exposed to excessive heat such
as sunshine, re or the like.

CP2540-FB_ARUSLLK_ENG.indd 8 2014-05-23  12:17:26

Connecting 9

Other Equipment
Connection

USB Connection

Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.

Removing the USB Device
from the unit

1. Choose a different function mode or press

Z

twice in a row.

2. Remove the USB device from the unit.

USB device requirement

yDevices which require additional program

installation connected to a computer, are not
supported.

yDo not extract the USB device while in operation.

yFor a large capacity USB, it may take longer than

a few minute to be searched.

yTo prevent data loss, back up all data.

yIf you use a USB extension cable or USB hub, the

USB device is not recognized.

yUsing NTFS le system is not supported. (Only

FAT(16/ 32) le system is supported.)

yThis unit is not supported when the total

number of les is 1 000 or more.

yExternal HDD, Card readers, Locked devices, or

hard type usb devices are not supported.

yUSB port of the unit cannot be connected to PC.

The unit can not be used as a storage device.

PORT. IN Connection

Connect a output (earphone or line out) of portable
device (MP3 or PMP etc) to the PORT. IN input
connector.

2

Connecting

Compatible USB Devices

yMP3 Player : Flash type MP3 player.

yUSB Flash Drive : Devices that support USB

yThe USB function of this unit does not support

some USB devices.

CP2540-FB_ARUSLLK_ENG.indd 9 2014-05-23  12:17:27

2.0 or USB 1.1.

yA warning that excessive sound pressure from

earphones and headphones can cause hearing
loss.

System Setting10

Basic Operations

1. Insert the disc (Label facing up.)
or connect the USB device to the USB port.

2. Select the CD or USB function by pressing
USB /CD.

3. Select a file (or track) you want to play by
pressing

C/V

To Do this

Press Z.

Press

d/M

Press

d/M

During playback, press

C

V

or

track/ le or to return to the
beginning of the current track/
le. Press C twice briey to step
back to the previous track/ le.

Press and hold
during playback and release it at
the point you want to listen to.

Press REPEAT repeatedly, the
display changes in the following
order, REPEAT 1 -> REPEAT ALL ->
RANDOM -> OFF.

During playback, press BASS
BLAST to reinforce the treble, bass
and surround sound eect.

Note

,

3

System Setting

Stop

Playback

Pause

Skipping to
the next/
previous
track/ le

Searching
for a section
within a
track

Playing
repeatedly
or randomly

Reinforcing
surround
eect.

yIf you playback scratched disc,youshould

have experience some noise and fail to read
disc.

yThe DTS is not supported.

.

to go to the next

C

V

or

Note

,

yUSB and CD Folders/Files are recognized as

below.

*ROOT

File_03

File_04

File_05

File_08

File_09

File_01

File_02

yFiles and folders will be presented in order

recorded and may be presented dierently
according to the record circumstances.

y*ROOT : the rst screen you can see when a

computer recognize the USB is “ROOT”

yFile will be played from $ le No.1 to $ le

No.10 one by one.

yFolders will be presented as the following

order;
FAT(USB) : FILE_01 -> FILE_02 -> FILE_03 ->
FILE_04 -> FILE_05 -> FILE_06 -> FILE_07

-> FILE_08 -> FILE_09 -> FILE_10
CD : FILE_01 -> FILE_02 -> FILE_03 ->
FILE_04 -> FILE_05 -> FILE_08 -> FILE_09

-> FILE_06 -> FILE_07 -> FILE_10

Directory

File

File_06

File_07

File_10

CP2540-FB_ARUSLLK_ENG.indd 10 2014-05-23  12:17:27

System Setting 11

Other Operations

Programmed Playback

The program function enables you to store your
favourite les from any disc or USB device.

A program can contain 20 tracks.

1. Insert a CD or USB and wait for it to be order.

2. Press PROG. in stop status.

3. Press

C

4. Press PROG. again to save and select a next
track.

5. Press

d/M

6. To clear your selection, press Z twice.

Note

,

The programs are also cleared when the disc
or USB device is removed, the unit is switched
to power o or the function is switched to
others.

Listening to music from your
portable player

The unit can be used to play the music from many
types of portable player.

1. Connect the portable player to the
PORT. IN (PORTABLE IN) connector on the unit.

2. Select the PORT. IN function by pressing
FUNCTION switch.

3. Turn on the portable player and start it playing.

to select a track.

V

or

to play the programmed music files.

Radio Operations

Listening to the radio

1. Select the radio function by pressing
FUNCTION switch.

2. Select FM.

3. Select the radio station by using TUNING dial.

To turn off the radio

Set FUNCTION switch to CD or PORT. IN, USB,
Bluetooth to turn o your unit.

3

System Setting

CP2540-FB_ARUSLLK_ENG.indd 11 2014-05-23  12:17:27

Operating12

Using a Bluetooth
wireless technology

About Bluetooth

Bluetooth® is wireless communication technology
for short range connection.

The sound may be interrupted when the
connection interfered by the other electronic wave
or you connect the bluetooth in the other rooms.

Connecting individual devices under Bluetooth®
wireless technology does not incur any charges. A
mobile phone with Bluetooth® wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA.

4

Bluetooth Profiles

Operating

In order to use Bluetooth® wireless technology,
devices must be able to interpret certain proles.
This unit is compatible with following prole.

A2DP (Advanced Audio Distribution Prole)

Listening to music stored on
the Bluetooth devices

Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.

1. Select the Bluetooth function by using the
FUNCTION switch.
Then the orange LED on the unit starts to blink.

2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG MICRO (XX:XX)”.

Note

,

yXX:XX means the last four digits of BT

address. For example, if your unit has a BT
address such as 9C:02:98:4A:F7:08, you will
see “LG MICRO (F7:08)” on your Bluetooth
device.

yXX:XX(Bluetooth address) may not be

present on some Bluetooth devices.

3. Enter the PIN code.
PIN code : 0000

4. The orange LED is lit up when this unit
successfully paired with your Bluetooth device.

Note

,

Depending on the Bluetooth device type,
some device have a dierent pairing way.

5. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.

CP2540-FB_ARUSLLK_ENG.indd 12 2014-05-23  12:17:27

Note

,

yWhen using Bluetooth® technology, you

have to make a connection between the
unit and the bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :

-There is a obstacle between the unit and
the bluetooth device.

-There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.

yThe sound may be interrupted when

the connection interfered by the other
electronic wave.

yYou cannot control the Bluetooth device

with this unit.

yPairing is limited one Bluetooth device per

one unit and multi-pairing is not supported.

yDepending on the type of the device,

you may not be able to use the Bluetooth
function.

yYou can enjoy wireless system using phone,

MP3, Notebook, etc..

yWhen someone stands and interrupts

communication between Bluetooth device
and the player, the connection will be
disconnected.

yThe more distant between the unit and

the bluetooth device, the lower the sound
quality becomes.

Operating 13

4

Operating

CP2540-FB_ARUSLLK_ENG.indd 13 2014-05-23  12:17:27

5 Troubleshooting

Troubleshooting14

Troubleshooting

PROBLEM CAUSE CORRECTION

No Power.

General

No sound.

yThe power cord is not plugged in. yPlug in the power cord.

yThe batteries are not remaining.

yCheck whether you select right

function.

yAn unplayable disc is inserted. yInsert a playable disc.

yChange the batteries with a

new ones.

yPress FUNCTION switch and

check the selected function.

5

Troubleshooting

CD

RADIO

The unit does

not start

playback.

No sound.

Some noise

occurs.

yNo disc is inserted. yInsert a disc.

yThe disc is dirty. yClean the disc.

yThe disc is inserted upside down.

yThe function is not selected to the

Radio.

yThere are electronic devices near

the player.

yPlace the disc with the

label or printed side facing
upwards.

ySelect the function to the

Radio.

ySet the player far from the

devices.

CP2540-FB_ARUSLLK_ENG.indd 14 2014-05-23  12:17:28

6 Appendix

Specifications

General

Power supply Refer to main label.

Power consumption Refer to main label.

Net Weight 1.65 kg

External dimensions (W x H x D) (303 x 121 x 240) mm

Operating conditions Temperature

Operating humidity 5 % to 90 %

Tuner FM

FM Tuning Range 88 to 108 MHz

Amplier

Output Power 0.5 W x 2

USB

Bus Power Supply (USB) DC 5 V 0 500 mA

USB Version USB 2.0 or USB 1.1

5 °C to 40 °C,
Operation status: Horizontal

Appendix 15

CD

Frequency Response 100 Hz to 18 kHz

Signal-to-noise ratio 61 dB

Dynamic range 56 dB

Speakers

Type 1 Way Speaker

Impedance 8 Ω

Rated Input Power 1 W

Max. Input Power 2 W

yDesign and specications are subject to change without notice.

CP2540-FB_ARUSLLK_ENG.indd 15 2014-05-23  12:17:28

6

Appendix

Appendix16

Maintenance

Handling the Unit

When shipping the unit

Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.

Keeping the exterior surfaces clean

yDo not use volatile liquids such as insecticide

spray near the unit.

yWiping with strong pressure may damage the

surface.

yDo not leave rubber or plastic products in

contact with the unit for a long period of time.

Cleaning the unit

To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.

Maintaining the Unit

The unit is a high-tech, precision device. If the

6

optical pick-up lens and disc drive parts are dirty

Appendix

or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.

Notes on Discs

Handling Discs

Never stick paper or tape on the disc.

Storing Discs

After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.

Cleaning Discs

Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.

CP2540-FB_ARUSLLK_ENG.indd 16 2014-05-23  12:17:28

Trademarks and
Licenses

Bluetooth® wireless technology is a system which
allows radio contact between electronic devices.

Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth® wireless
technology.

The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.

Other trademarks and trade names are those of
their respective owners.

Appendix 17

CP2540-FB_ARUSLLK_ENG.indd 17 2014-05-23  12:17:28

6

Appendix

Символ «не для пищевой продукции» применяется
в соответствие с техническим регламентом
Таможенного союза «О безопасности упаковки»
005/2011 и указывает на то, что упаковка данного
продукта не предназначена для повторного
использования и подлежит утилизации. Упаковку
данного продукта запрещается использовать для
хранения пищевой продукции.

Символ Кедендік одақтың 005/2011
техникалық регламентіне сәйкес
қолданылады және осы өнімнің қаптамасын
екінші рет пайдалануға арналмағанын және
жоюға жататынын көрсетеді. Осы өнімнің
қаптамасын азық-түлік өнімдерін сақтау үшін
пайдалануға тыйым салынады.

Символ «петля Мебиуса» указывает на
возможность утилизации упаковки. Символ может
быть дополнен обозначением материала упаковки
в виде цифрового и/или буквенного обозначения.

Символ қаптаманы жою мүмкіндігін көрсетеді.
Символ сандық код және/немесе әріп
белгілері түріндегі қаптама материалының
белгісімен толықтырылуы мүмкін.

Российская Федерация

Импортер ООО “ЛГ Электроникс Рус”

Адрес импортера: 143160 Российская Федерация, Московская область, Рузский район, сельское поселение Дороховское,

Адрес производителя : МАТЕCТАP

86 км. Минского шоссе, д.9

Дон Гуан МАТЕСТАР ЭЛЕКТРОНИКС ЛТД. Китай, г. ДонгГуан, округ Чанг Пин, район Чен Ву Бей

Сделано в Китае

Україна

Найменування та адреса імпортера
ПІІ «ЛГ ЕЛЕКТРОНІКС Україна» вул. Басейна, 6, м. Київ, 01004,
Тел. : [phone]

Қазақстан Республикасы

Импорттаушы АҚ “ЭЛ Джи Электроникс Алматы Қазақстан”, 050061, Алматы қ., к. Көкорай, 2А

MATESTAR

Өндірушінің мекенжайы:

Қазақстан Республикасы территориясында тұтынушылардан келіп түскен талаптар мен ұсыныстарды
қарайтын және тауарды жөндеу мен техникалық қызмет көрсететін ұжым:

АҚ «Эл Джи Электроникс Алматы Казахстан», 050061, Қазақстан Республикасы, Алматы қ., Көкорай, 2А. Басқа
сервис орталықтары жайында мағлұматты “Тұтынушыға қызмет көрсету орталығына” телефон шалу арқылы
білуге болады.

Dong Guan MATESTAR ELECTRONICS LTD. Қытай, ДонгГуан қ., Чанг Пинг қаласы, Чен Ву
Бей ауданы.

Қытайда жасалған

CP2540-FB_ARUSLLK_ENG.indd 18 2014-05-23  12:17:30