How it Works
LG
Loading...
SB16W
Instruction manual [nl]
16 pgs1.48 Mb0
Owner's Manual
16 pgs1.38 Mb0
Owner's Manual [ro]
16 pgs1.4 Mb0
User guide
16 pgs1.83 Mb0
User Manual
16 pgs1.59 Mb0
User manual [fr]
16 pgs1.53 Mb0
User Manual [uk]
16 pgs2.29 Mb0

LG SB16W User guide

Download
OWNER’S MANUAL
STYLISH PORTABLE BOOM BOX
Please read this manual carefully before operating your set and retain it for future reference.
ENGLISH
SB16B (SB16B) SB16W (SB16W)
1 Getting Started
Safety Information
Getting Started 3
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous
enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons.
instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects lled with liquids, such as vases, shall be placed on the apparatus.
WARNING: Do not install this equipment in a conned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built­in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.
voltage within the product’s
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)
CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specied herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specication page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or re. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.
NOTICE : The main label is attached on the exterior of the bottom of the apparatus. Refer to the label attached on the bottom of the unit.
1
Getting Started
Getting Started4
This device is equipped with a portable battery or accumulator.
Safety way to remove the battery or the battery from the equipment: Remove the
1
old battery or battery pack, follow the steps
Getting Started
in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, re or the like.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city oce, waste disposal service or the shop where you purchased the product.
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled bin symbol is attached to batteries/ accumulators of Your product it means they are covered by European Directive 2006/66/EC.
2. This symbol may be combined with chemical symbols for mercury(Hg), cadmium(Cd) or lead(Pb) if the battery Contains more that 0.0005% of mercury,0.002% of cadmium or
0.004% of lead.
3. All batteries/accumulators should be disposed separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
4. The correct disposal of Your old batteries/accumulators will help to prevent potential negative consequences for the environment, animal and human health.
5. For more detailed information about disposal of Your old batteries/ accumulators, please contact Your city office, waste disposal service or the shop where You purchased the product.
Table of Contents
Table of Contents 5
1 Getting Started
3 Safety Information
6 Accessories
6 Playable file Requirement
7 Front panel
2 Connecting
8 Power Source
8 – Battery Installation
8 – AC Power Cord Connection
9 Other Equipment Connection
9 – USB Connection
9 – Removing the USB Device from the
unit
9 – Compatible USB Devices
9 – USB device requirement
9 – PORT. IN Connection
3 System Setting
10 Basic Operations
11 Other Operations
11 Radio Operations
11 – Listening to the radio
11 – To turn off the radio
4 Operating
12 Maintenance
12 – Handling the Unit
12 – Notes on Discs
12 Trademarks and Licenses
5 Troubleshooting
13 Troubleshooting
6 Appendix
14 Specifications
1
2
3
4
5
6
Getting Started6
Accessories
Please check and identify the supplied accessories.
1
Getting Started
AC Power cable (1)
Playable file Requirement
MP3/ WMA music le requirement:
MP3/ WMA le compatibility with this unit is limited as follows :
ySampling frequency : between 8 to 48 kHz (MP3),
within 8 to 48kHz (WMA)
yBit rate : between 32 to 384 kbps (MP3),
32 to 384 kbps (WMA)
yMaximum les : Under 999
yFile extensions : “.mp3”/ “.wma”
yCD-ROM le format : ISO 9660/ JOLIET
yWe recommend that you use Easy-CD creator,
which creates an ISO 9660 le system.
yYou have to set the disc format option to
[Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live System, you cannot use it on LG player. (Mastered/Live File System : Disc format system for windows Vista)
Front panel
Getting Started 7
a b c
d
e
f
Antenna
a
PORT.IN
b
The player can be used to play the music from many types of portable player.
FUNCTION switch and Power o
c
Changes the function. Turn o the unit.
VOL (-/+)
d
Volume control.
Disc Door
e
Speaker
f
Handle
g
TUNING (-/+) DIAL
h
REPEAT
i
You can enjoy the music repeatedly or randomly.
PROG. Plays back tracks in any order USB/CD
Selects the USB/ CD function.
Starts or pauses playback.
d/M
Stop
Z C/V ws
When a CD/ USB containing MP3/ WMA les in several folders is being played, press it to select the folder you want to play.
USB Connector BASS BLAST
Reinforces the treble, bass and surround eect.
DISPLAY WINDOW
j
(Only CD and USB)
Skip/ search
Search for a folder of MP3/ WMA les.
g
h
f
i
j
1
Getting Started
Connecting8
Power Source
2
Connecting
Battery Installation
1. Press and open the battery cover.
2. Put six “C” (R14) batteries (not supplied) into the compartment making sure the 2 and 3 should be correctly positioned.
3. Replace the battery cover.
AC Power Cord Connection
1. Connect one end of the AC power cord
(included) to the AC IN socket.
2. Plug the other end into the wall outlet.
Note
,
yUnplug the AC power cord from the wall
outlet if you do not to use for an extended period of time.
yTo avoid damage from possible battery
leakage, remove the batteries if you do not plan to use the unit for an extended period of time.
yWhen the batteries are weak, replace all the
batteries with new ones.
yWhile the AC power cord connect to the
wall outlet, the batteries are not worn out.
yBatteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as sunshine, re or the like.
Connecting 9
Other Equipment Connection
USB Connection
Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit.
Removing the USB Device from the unit
1. Choose a different function mode or press
Z
twice in a row.
2. Remove the USB device from the unit.
USB device requirement
yDevices which require additional program
installation connected to a computer, are not supported.
yDo not extract the USB device while in operation.
yFor a large capacity USB, it may take longer than
a few minute to be searched.
yTo prevent data loss, back up all data.
yIf you use a USB extension cable or USB hub, the
USB device is not recognized.
yUsing NTFS le system is not supported. (Only
FAT(16/ 32) le system is supported.)
yThis unit is not supported when the total
number of les is 1 000 or more.
yExternal HDD, Card readers, Locked devices, or
hard type usb devices are not supported.
yUSB port of the unit cannot be connected to PC.
The unit can not be used as a storage device.
PORT. IN Connection
Connect a output (earphone or line out) of portable device (MP3 or PMP etc) to the AUDIO input connector.
2
Connecting
Compatible USB Devices
yMP3 Player : Flash type MP3 player.
yUSB Flash Drive : Devices that support USB
yThe USB function of this unit does not support
some USB devices.
2.0 or USB 1.1.
yA warning that excessive sound pressure from
earphones and headphones can cause hearing loss.
System Setting10
Basic Operations
1. Insert the disc (Label facing up.) or connect the USB device to the USB port.
2. Select the CD or USB function by pressing USB /CD.
3. Select a file (or track) you want to play by pressing
C/V
To Do this
Press Z.
Press
d/M
Press
d/M
During playback, press
C
V
or
track/ le or to return to the beginning of the current track/ le. Press C twice briey to step back to the previous track/ le.
Press and hold during playback and release it at the point you want to listen to.
Press REPEAT repeatedly, the display changes in the following order, REPEAT 1 -> REPEAT ALL -> RANDOM -> OFF.
During playback, press BASS BLAST to reinforce the treble, bass and surround sound eect.
3
System Setting
Stop
Playback
Pause
Skipping to the next/ previous track/ le
Searching for a section within a track
Playing repeatedly or randomly
Reinforcing surround eect.
.
to go to the next
C
V
or
Note
,
yUSB and CD Folders/Files are recognized as
below.
*ROOT
File_03
File_04
File_05
File_08
File_09
File_01
File_02
yFiles and folders will be presented in order
recorded and may be presented dierently according to the record circumstances.
y*ROOT : the rst screen you can see when a
computer recognize the USB is “ROOT”
yFile will be played from $ le No.1 to $ le
No.10 one by one.
yFolders will be presented as the following
order; FAT(USB) : FILE_01 -> FILE_02 -> FILE_03 -> FILE_04 -> FILE_05 -> FILE_06 -> FILE_07
-> FILE_08 -> FILE_09 -> FILE_10 CD : FILE_01 -> FILE_02 -> FILE_03 -> FILE_04 -> FILE_05 -> FILE_08 -> FILE_09
-> FILE_06 -> FILE_07 -> FILE_10
Directory
File
File_06
File_07
File_10
System Setting 11
Other Operations
Programmed Playback
The program function enables you to store your favourite les from any disc or USB device.
A program can contain 20 tracks.
1. Insert a CD or USB and wait for it to be order.
2. Press PROG. in stop status.
3. Press
C
4. Press PROG. again to save and select a next track.
5. Press
d/M
6. To clear your selection, press Z twice.
Note
,
The programs are also cleared when the disc or USB device is removed, the unit is switched to power o or the function is switched to others.
Listening to music from your portable player
The unit can be used to play the music from many types of portable player.
1. Connect the portable player to the PORT. IN (PORTABLE IN) connector on the unit.
2. Select the PORTABLE function by pressing FUNCTION switch.
3. Turn on the portable player and start it playing.
to select a track.
V
or
to play the programmed music files.
Radio Operations
Listening to the radio
1. Select the radio function by pressing FUNCTION switch.
2. Select either FM or AM
3. Select the radio station by using TUNING dial
To turn off the radio
Set FUNCTION switch to CD or PORT. IN, USB, to turn o your unit.
3
System Setting
Operating12
Maintenance
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.
Keeping the exterior surfaces clean
yDo not use volatile liquids such as insecticide
spray near the unit.
yWiping with strong pressure may damage the
surface.
yDo not leave rubber or plastic products in
contact with the unit for a long period of time.
4
Cleaning the unit
Operating
To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.
Maintaining the Unit
The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. For details, please contact your nearest authorized service center.
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.
Trademarks and Licenses
5 Troubleshooting
Troubleshooting
PROBLEM CAUSE CORRECTION
No Power.
General
No sound.
Troubleshooting 13
yThe power cord is not plugged in. yPlug in the power cord.
yThe batteries are not remaining.
yCheck whether you select right
function.
yAn unplayable disc is inserted. yInsert a playable disc.
yChange the batteries with a
new ones.
yPress FUNCTION switch and
check the selected function.
CD
RADIO
The unit does
not start
playback.
No sound.
Some noise
occurs.
yNo disc is inserted. yInsert a disc.
yThe disc is dirty. yClean the disc.
yThe disc is inserted upside down.
yThe function is not selected to the
Radio.
yThere are electronic devices near
the player.
yPlace the disc with the
label or printed side facing upwards.
ySelect the function to the
Radio.
ySet the player far from the
devices.
5
Troubleshooting
6 Appendix
Appendix14
Specifications
General
Power supply Refer to main label.
Power consumption Refer to main label.
Net Weight 1.6 kg
External dimensions (W x H x D) (303 x 121 x 240) mm
Operating conditions Temperature
Operating humidity 5 % to 90 %
Tuner FM/AM
FM Tuning Range 88 to 108 MHz
AM Tuning Range 530 to 1 620 kHz
Amplier
Output Power 0.5 W x 2
5 °C to 40 °C, Operation status: Horizontal
6
Appendix
USB
Bus Power Supply (USB) DC 5 V 0 500 mA
USB Version USB 2.0 or USB 1.1
CD
Frequency Response 100 MHz to 18 kHz
Signal-to-noise ratio 61 dB
Dynamic range 56 dB
Speakers
Type 1 Way Speaker
Impedance 8 Ω
Rated Input Power 1 W
Max. Input Power 2 W
yDesign and specications are subject to change without notice.
Україна
Name and address of importer: ПІІ ‘ЛГ Електронікс Україна’, Україна, 01004, м. Київ, вул. Басейна, 4 (літера А), тел.: +38 (044) 201-43-50, факс: +38 (044) 201-43-73
Российская Федерация
Импортер OOO “ЛГ Электроникс Рус” Адрес импортера : 143160 Российская Федерация, Московская область, Рузский район, сельское
поселение Дороховское, 86 км. Минского шоссе, д.9
Адрес производителя : Дон Гуан МАТЕСТАР ЭЛЕКТРОНИКС ЛТД., Китай, г. ДонгГуан, ЧангПин таун, район
ЧенВуБей
Сделано в Китае
Қазақстан Республикасы
Импорттаушы АҚ “ЭЛ Джи Электроникс Алматы Қазақстан”, 050061, Алматы қ., к. Кокорай, 2А
Өндірушінің мекенжайы : Қытай, ДонгГуан қ., ЧангПинг қаласы, ЧенВуБей ауданы.
Қазақстан Республикасы территориясында тұтынушылардан келіп түскен талаптар мен ұсыныстарды қарайтын және тауарды жөндеу мен техникалық қызмет көрсететін ұжым:
АҚ «Эл Джи Электроникс Алматы Казахстан», 050061, Қазақстан Республикасы, Алматы қ., Кокорай, 2А. Басқа сервис орталықтары жайында мағлұматты “Тұтынушыға қызмет көрсету орталығына” телефон шалу арқылы білуге болады.
Қытайда жасалған
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use