LG S350 User Manual

OWNER’S MANUAL
3D GLASSES
Please read this manual carefully before operating and keep it for future reference.
AG-S350
P/NO: SAC34026212 (1110-REV00)
www.lg.com
FEATURES
AG-S350 are 3D glasses using RF(2.4GHz) wireless communication.
ACCESSORIES
■If the device is connected to the TV that supports the RF glasses, you can enjoy the vivid 3D images.
■You can enjoy movies or pictures made as 3D.
■If you are using your 3D glasses for the fi rst time, make sure that the battery is fully charged.
3D Glasses Nose Pad 8-pin mini USB
cable
NOTE
!
▶The accessories represented in this manual may differ from the actual appearances.
Manual CD Quick Start
Guide
PART NAMES
Nose Pad
3D Glasses’ Lenses
Pairing 3D Glasses with Your 3D TV
Pairing means establishing a wireless connection between the 3D TV and 3D glasses.
*1
The 3D glasses will pair with the 3D TV which has the strongest wireless signal; if there is more than one TV in range, please place the 3D glasses within 10 cm of the 3D TV you want to pair the glasses with.
Recommended pairing
distance (10cm)
Power Button
LED indicator
USB port (charging port) 8-pin mini USB cable
How to pair the glasses How to re-pair the glasses
*1
Pouches
!
ʹΞ
NOTE
1.
Turn the 3D TV on and switch the TV to
3D mode.
Place your 3D glasses within the recommended
2.
pairing distance and turn them on.
3. During pairing, the red and green LED
lights will blink alternately.
When the pairing is complete, the LED light
4.
goes off and the 3D glasses start working.
5. The 3D glasses will not need to be
paired with the same 3D TV again.
▶The device recognizes the unique ID of the TV to which it is connected. Thus, IDs of other TVs are not recognized by the
device. If you wish to re-connect the device to other TVs, please see “How to re-connect the glasses”.
1. Press and hold the power button on the
3D glasses for more than 8 seconds, the
green LED light should come on.
2.
The green LED light will blink three times
and then 3D glasses are ready to pair.
3. Turn the TV on and switch to 3D mode.
4.
Place your 3D glasses within the recommended
pairing distance and turn them on.
5. During pairing, the red and green LED
lights will blink alternately.
6. When the pairing is complete, the
LED light goes off and pairing with the
second 3D TV is complete.
2
USING 3D GLASSES
Button Operation LED Indication
CHARGING THE GLASSES
1
Power On
Power Off
Auto Off*
1
Battery(Lithium polymer) discharge
How to re-connect the glasses
*1
The Auto Off function automatically switches the power off when the glasses lose signal from the TV. This may occur when the distance or angle between the device and the TV are out of range; when there is a barrier between the two
devices; or when the device is switched from 3D to 2D mode.
Connect the USB port located under the power button on the glasses to the USB port of the
Press and hold the power button for 1 or 2 seconds.
Press and hold down the Power button (1 second ~2 second)
The device is automatically switched off if there is no 3D signal for more than one minute.
-
Press the power button for over eight seconds.
The red LED blinks once.
The red LED blinks three times.
The red LED blinks three times.
If the battery is discharged, the red LED blinks for 1 minute and turns off automatically.
* When charging is completed, the LED is lit green.
Release the button when the green LED light turns on. Then, you will see the green light blink three times before the device is switched off. If you switch the power on again, the glasses will be connected to the TV with the strongest signal.
TV or PC using the supplied 8-pin mini USB cable as shown by the fi gure.
Do not insert the supplied 8-pin mini USB cable in the reverse direction. Otherwise, this may
CAUTION
cause damage to the product.
Ex.) AG-S350
Charge the glasses until the LED is green. The glasses will fully charge in about 1 hours 50
2
minute
.
NOTE
!
CAUTION
▶While charging: The LED is red.
▶When charging is complete: The LED is green.
▶When the battery is discharged: The Red LED blinks for 1 minute and turns off automatically.
▶The 3D glasses can still be used while charging via a USB device.
If you use a USB cable other the one (8-pin mini USB) supplied with the product, the product may be damaged.
This equipment shall be powered with USB 2.0 or higher.
▶Avoid twisting or dropping the 3D glasses as this may cause damage or break them.
HOW TO WEAR THE 3D GLASSES
Using 3D glasses may not be convenient for users wearing regular glasses. Adjusting the nose pad can improve your viewing comfort.
How to adjust the nose pad
1
2
Pull the nose pad in the direction shown by the
arrow as shown in the image. Be careful not
to twist or lift the nose pad as this can cause
damage.
3
!
NOTE
▶Follow the instructions in reverse order to put the nose pad back.
▶The nose pad can be adjusted even if you don’t wear glasses.
CAUTION
Please read these safety instructions carefully to ensure your personal safety and to prevent damage.
Do not spray cleaner directly onto the surface
10
of the product. This may result in discoloration and cracks and may cause the screen display to peel off.
If you experience difficulty while viewing 3D
1
images with the 3D glasses, you may have some problems with your eyesight.
You may experience headaches or fatigue when viewing 3D images through the glasses for too long.
2
If you experience headaches, •• fatigue, or dizziness, stop watching immediately.
3
Do not drop objects onto the product or import force to the product. This may result in electric shock or fire.
4
Do not use your product near a humidifier or kitchen counter. This may result in electric shock or fire.
5
Do not disassemble, repair or modify the product or its parts. Failing to do so may result in damage to the product or a malfunction.
Do not let water come into contact with the
11
product when cleaning it. Ensure that water does not enter the product. This may result in electric shock or fire.
Since the lens of the product is easily
12
scratched, make sure to clean the product with a soft cloth. As the product may be scratched if there is any foreign material on the cloth, make sure to shake off any dust before using it.
Do not scratch the surface of the Liquid
13
crystal shutters with a sharp tool and do not clean it using chemicals.
Do not apply force to the 3D Glasses’ Lenses.
14
Do not drop or bend the product.
When watching 3D video, ensure that you
15
are viewing the video within the specified receiving range. (For more information, please
refer to the user manual of the TV.) If the receiving range is out of the specified range, the screen may not be viewable as 3D video.
6
The product may be easily taken off after putting on for some people.
The following people should not use this
7
product: Pregnant women, infirm persons, persons with heart issues, as well as persons that become nauseous easily. People with these conditions should not use this product.
8
When watching 3D video, do not place anything nearby that can be easily broken. You may mistake a 3D image for an actual object and move your body, causing you to break nearby objects and hurt yourself.
Use this product for watching 3D video only.
9
Do not use it for any other purpose. Do not use the 3D Glasses as sunglasses or reading glasses.
Flickering may be generated by the 3D
16
glasses (60 Hz) when watching the 3D screen when a magnetic fluorescent lamp (50 Hz) is on. If you encounter this symptom, please turn off the light and continue watching.
The 3D glasses are a wireless communications
17
device that use the 2.4GHz frequency band and may be interfered by devices, such as the microwave oven or the wireless LAN.
Wireless performance may also be interfered when there is a physical barrier between the 3D glasses and the 3D TV.
Children should be closely supervised when
18
using the 3D glasses and should stop using them in the cases of fatigue, twitching of the eye or face muscles, or other involuntary move­ments.
Do not use the 3D glasses with the nose pad if
19
you are not wearing regular glasses. Otherwise, this may hurt your eyes.
4
Loading...
+ 9 hidden pages