LG RT-21FA31 User guide

Colour Television

OWNER’S MANUAL

Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.

Model number :
Serial number :

ME28

Contents

Installation 3

Location and function of controls 4

Remote control handset
Battery installation
Front panel / Side panel

Basic operation 7

On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
TV Swivel function (option)
On screen language selection (option)

On screen menus 8

Menu selection

Setting up TV stations 9

Auto programme tuning
Manual programme tuning
Fine Tuning / Programme edit
Favorite programme
Calling the programme table

Picture adjustment 14

PSM (Picture Status Memory)
Picture adjustment / Eye (option)
Turbo picture selection (option)

Sound adjustment (option) 16

SSM (Sound Status Memory)
Balance adjustment
Turbo sound selection (option)
Sound output selection
Stereo/Dual reception (option)
NICAM reception (option)

Other functions 19

TV and AV modes
Auto AV switching (option)
Child lock / Auto sleep / Blue back (option)
AVL (Auto Volume Leveler) (option)
CSM (Colour Status Memory) / Sleep timer

Game (option) 21

Block & Balloon (option)
Cricket & Car racing (option)

Timer (option) 22

Off timer / On timer

Teletext (option) 23

Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions

Connection of external equipment 26

Aerial socket
Audio-L/R(or Audio)/Video in/out sockets (option)
Euro scart socket (option)
Component in sockets (option)
Headphone socket (option)

Troubleshooting check list Back cover

2

Installation

Power

This set operates on an AC mains supply, the voltage is as indicat­ed on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aer­ial and mains plugs.

Warning

To prevent fire or shock hazard, do not expose the set to rain or
moisture.
The working life of this set is 7 years since the date of delivery to
consumer.

Service

Never remove the back cover of the set as this can expose you to
very high voltage and other hazards. If the set does not operate
properly, unplug it and call your dealer.

Aerial

Connect the aerial cable to the socket marked +75Ωon the back

cover. For the best reception an outdoor aerial should be used.

Location

Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.

3

Location and function of controls

All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.

Remote control handset

Before you use the remote control handset, please install the bat­teries. See the next page.

1. POWER

switches the set on from standby or off to standby.

2. NUMBER BUTTONS

switches the set on from standby or directly select a number.

3. MENU (or INDEX)

selects a menu.
selects an index page in the teletext mode (only TELETEXT
models).

4. EYE/*(option)

switches the eye function on or off.

5.

/

(Programme Up/Down)

selects a programme or a menu item.
switches the set on from standby.
scans programmes automatically.

F / G

(Volume Up/Down)

adjusts the volume.
adjusts menu settings.

OK

accepts your selection or displays the current mode.

6. Q.VIEW

returns to the previously viewed programme.
selects a favorite programme.

7. TELETEXT BUTTONS (option)

These buttons are used for teletext.
For further details, see the ‘Teletext’ section.

8. PSM (Picture Status Memory)

recalls your preferred picture setting.

9. TURBO PICTURE / SOUND BUTTON (option)

selects Turbo picture and sound.

4

POWER MUTE

123

456

789

MENU/INDEX

TV/AV

TV

0

i

TEXT/MIX/ SIZE/ HOLD/

EYE/

Q.VIEW

LIST

I / II /

( )

PR

( )

PR

OK

VOLVOL

UPDATE/

PSM SSM/ SLEEP/ M

X

TIME/ REVEAL/

?

/

TURBO/

PICTURE SOUND

1

2

3

4

5

6

7

8

9

10

11

12

13

14

16

15

( )

( )

(With TELETEXT)

Location and function of controls

10. MUTE

switches the sound on or off.

11. TV/AV

selects TV or AV mode.
clears the menu from the screen.
switches the set on from standby.

12. I/II/*(option)

selects the language during dual language broadcast. (option)
selects the sound output.

13. LIST

displays the programme table.

14. SLEEP

sets the sleep timer.

15. SSM/*(option) (Sound Status Memory)

recalls your preferred sound setting.

16. SURROUND (ºº/*) (option)

selects surround sound.

*

: No function

COLOURED BUTTONS : These buttons are used for teletext (only

TELETEXT models) or programme edit.

Battery installation

The remote control handset is powered by two AAA type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( and ) marked inside the compartment.

Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.

5

+

-

(Without TELETEXT)

POWER MUTE

123

456

789

MENU

TV/AV

0

EYE/

Q.VIEW

LIST

I / II /

( )

PR

( )

PR

OK

VOLVOL

PSM SSM/ SLEEP

PICTURE SOUND

/

TURBO/

1

2

3

4

5

6

8

9

10

11

12

13

14

16

15

1. MAIN POWER (ON/OFF)

switches the set on or off.

2. POWER/STANDBY INDICATOR

illuminates brightly when the set is in
standby mode.
dims when the set is switched on.
blinks when signal is input from the
remote control.

3. REMOTE CONTROL SENSOR

4. MENU

selects a menu.

5. OK

accepts your selection or displays the
current mode.

FF / GG

(Volume Up/Down)

adjusts the volume.
adjusts menu settings.

DD / EE

(Programme Up/Down)

selects a programme or a menu item.
switches the set on from standby.

6. TV/AV

selects TV or AV mode.
clears the menu from the screen.
switches the set on from standby.

7. (Function)

selects volume, EYE (option), picture items
or brief auto programme while the menus
not display.

8. +/- (

DD/EE

)

adjusts the function or selects a pro­gramme.
switches the set on from standby.

9. AUDIO - L/R (or AUDIO) / VIDEO IN
SOCKETS (AV) (option)

Connect the audio/video out sockets of
external equipment to these sockets.

Note :If both the input jacks on the
front/side panel and back panel have
been connected to external equipments
simultaneously, only the input jacks on
the front/side panel can be received.

10. HEADPHONE SOCKET (option)

Connect the headphone plug to this
socket.

11. EYE (option)

adjusts picture according to the sur­rounding conditions.

12. TURBO SOUND / PICTURE (option)

switches Turbo sound or Turbo picture
function on or off.

Note : Do not place any heavy objects (over
4Kg) on the RF/RT-21FA30/31/32 series mod­els.

Location and function of controls

6

ON/OFF

MENU OK VOL PR

1 3 4 5 9 10

ON/OFF

MENU

VOL

OK

PR

RF/RT-21FA30/31/32 series

CF/CT-21Q60K/61K/62K series

CF/CT-21Q20K/21K/22K series

CF/CT-21Q64K/65K/66K series

CF/CT-15Q90K/91K/92K series

VIDEO

TV/AV

VOL

PR

AUDIO

AV

LR

ON/OFF

TV/AV (VOL)PR VIDEO

AUDIO

AV

LR

( ) ( )

ON/OFF

ON/OFF

TV/AV

VOL

PR

1210 9 67 8 2 3

1

2

3

6

7 8

11

1 2 3 6 7 9 10 11

2 3

4 5

1

11

ON/OFF

MENU

OK

VOL PR

VIDEO

AUDIO

L

R

AV

RF/RT-15/21FB50 series

2 3 4 105 9

1

11

11

ON/OFF

MENU

VOL SOUND

OK

PR PICTURE

TURBO

DIGITAL TURBO SOUND

DIGITAL TURBO SOUND

CF/CT-21Q90K/91K/92K series

1 2

3

4 115

8

VIDEO

RL AUDIO

A

V

10

9

VIDEO

L

RAUDIO

A
V

10

9

PR

VOLOKMENU

RF/RT-21FA71/72/75/76/79 series

ON/OFF

VIDEO AUDIO

AV

R

L

10

9

1

3 2

4

5

12

RF/RT-21FB30 series

ON/OFF

MENUOKVOL

PR

RF/RT-21FB20 series

1 2

3

4 115

VIDEO

L

RAUDIO

AV

10

9

ON/OFF

MENU OK

VOL PR

VIDEO AUDIO

AV

VIDEO AUDIO

L/MONO

R

AV3

1 2 3 4 10 1095 9

Basic operation

On and off

1. Press the main power button to switch the set on.

2. If the set is in standby mode, press the POWER,

D / E

, TV/AV or

NUMBER buttons on the remote control handset to switch it on fully.

3. Press the POWER button on the remote control handset.

The set reverts to standby mode.

4. Press the main power button again to switch the set off.

Note : If, while the set is switched on, the mains plug is discon­nected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.

Programme selection

You can select a programme number with the

D / E

or NUMBER

buttons.

Volume adjustment

Press the F / G button to adjust the volume.

Quick view

Press the Q.VIEW button to view the last programme you were
watching.

Note : This function works only when

Favorite programme is

set to

Off. Otherwise each press of this button will select a stored

favorite programme.

Mute function

Press the MUTE button. The sound is switched off and the display

appears.

You can cancel it by pressing the MUTE,

F / G

, SSM/*, I/II/*,

ºº

/

*

or TURBO SOUND button.

Auto Demonstration

To review all the menus programmed in the set, press the OK or
button of the front panel control for about 5 seconds. To stop auto
demonstration, press any button of the front panel control and

POWER button of the remote control.

TV Swivel function (option)

In some models, you can manually turn TV set at left or right direc­tion by 15 or 20 degrees, so that the watching degree is suitable for
your position.

Note : Swivel panel is fixed in the hole at the swivel panel on the
back of the set by small bar(Swivel fixer). To operate this function,
pull it out.

On screen language selection (option)

The menu can be displayed on the screen in desired language.
First select your language.

1. Press the MENU button to select the Station menu.

2. Press the

G

button and then

D / E

button to select Language.

3. Press the

G

button and then

D / E

button to select your desired
language.
All the on screen displays will appear in the selected language.
Press the OK or

F

button to select the station menu.

4. Press the TV/AV button to return to normal TV viewing.

7

POWER MUTE

123

456

789

MENU

TV/AV

0

Q.VIEW

I / II /

( )

PR

( )

PR

OK

VOLVOL

SSM/

/

TURBO/

SOUND

On screen menus

The dialogue between you and your set takes place on screen with
an operator menu. The buttons required for the operating steps are
also displayed.

Menu selection

1. Repeatedly press the MENU button to display each menu.

2. Press the Gbutton and then

D / E

button to select a menu item.

3. Press the Gbutton to display the sub menu or the pull-down
menu.

4. Change the setting of an item in the sub or pull-down menu with

F / G

or

D / E

.

You can move to the higher level menu by pressing the OK or

F

button and to move to the lower level menu by pressing theGbut­ton.

Note :

a. In the AV mode, the Station menu is not displayed.
b. In the teletext mode, menus are not displayed.
c. In mono models, the Sound menu does not appear.
d. In some models, the Normal/Turbo search will not display,

only the Start will display in the Auto programme menu.

e. In some models, the Language or Booster will not display.

8

MENU

( )

PR

( )

PR

OK

VOLVOL

Station menu

Picture menu

Sound menu

Special menu

TV programme

CH.

AutoOprogramme

{

ManualOprogramme

{

Program meOedit

{

FavoriteOprogramme

{

Language

{

()O{OOKOMENUOTV®AV

CH.

PSM

{

User

{

()O{OOKOMENUOTV®AV

CH.

SSM

{

Balance

{

CH.

Input

{

ChildOlock

{

AutoOsleep

{

BlueOback

{

AVL

{

CSM

{

Game

{

Timer

{

()O{OOKOMENUOTV®AV

()O{OOKOMENUOTV®AV

System

{

StorageOfrom

{

NormalOsearch

{

TurboOsearch

{

System

{

OBG
OOI
ODK
OOM

()O}{OOKOMENUOTV®AV

PR.

{

System

{

Channel

{

Fine

{

Search

{

Name

{

Booster

{

OO 9

()O}{OOKOMENUOTV®AV

()O}{OOKOMENUOTV®AV

00O

-O-O-O-O-

OO05O SO 6O9
01O CO 0O3OO06O SO 1O7
02O CO 1O2OO07O SO 2O2
03O SO 6O6OO08O CO 0O9
04O SO 6O7OO09O CO 1O1

DeleteOOOCopy

MoveOOOOOSkip

PR.

{

00O

-O-O-O-O-

Setting up TV stations

Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the

D / E

or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.

Note : In some models up to 200 TV stations can be stored.

Auto programme tuning

All stations that can be received are stored by this method. It is rec­ommended that you use auto programme during installation of this set.

1. Repeatedly press the MENU button to select the Station menu.

2. Press the

G

button and then

D / E

button to select Auto pro-

gramme

.

3. Press the

G

button to display the Auto programme menu.

4. Press the Gbutton. Select a TV system with the

D / E

button

on the System pull-down menu;

BG : (Asia/New Zealand/M.East/Africa/Australia)
I : (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M

: (USA/Korea/Philippines) (option)

5. Press the OK or F button.

6. Press the

D / E

button to select Storage from.

7. Press the Gbutton. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage

from

pull-down menu. Any number under 10 is entered with a

numeric ‘0’ (or ‘00’) in front of it, i.e. ‘05’ (or ‘005’) for 5.

8. Press the OK button.

9. Press the

D / E

button to select Normal or Turbo search.

Option: In some models, you can only select Start.

Note :

a. Turbo search is further faster than Normal search and in

some models, these searches will automatically store all receiv­able stations.

b. If the programmed station has poor quality sound, select the

system again in the Manual programme menu.

10. Press the Gbutton to begin auto programming.

All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the ‘Programme edit’ section
to edit the stored programme.

11. Press the TV/AV button to return to normal TV viewing.

9

123

456

789

MENU

TV/AV

0

( )

PR

( )

PR

OK

VOLVOL

Station

Menu

System

{

StorageOfrom

{

NormalOsearch

{

TurboOsearch

{

NormalOsearch

{

MENU

OOCO01O(BG)

77O7O7O736%

System

{

StorageOfrom

{

NormalOsearch

{

TurboOsearch

{

MENU

77O7O7O736%

(Normal search) (Turbo search)

CH.

AutoOprogramme

{

ManualOprogramme

{

Program meOedit

{

FavoriteOprogramme

{

Language

{

()O{OOKOMENUOTV®AV

System

{

StorageOfrom

{

NormalOsearch

{

TurboOsearch

{

System

{

OBG
OOI
ODK
OOM

()O}{OOKOMENUOTV®AV

TurboOsearch

{

OOCO01O(BG)

Setting up TV stations

Auto programme scan

To automatically scan the pictures of stored programmes, press the

or button for about 3 seconds. The picture of stored pro-

grammes appears on the screen one by one.

To stop auto programme scanning, press any button except VCR
buttons.

Manual programme tuning

Manual programme lets you manually tune and arrange the sta­tions in whatever order you desire. Also you can assign a station
name with five characters to each programme number.

1. Repeatedly press the MENU button to select the Station menu.

2. Press the Gbutton and then

D / E

button to select Manual

programme.

3. Press the

G

button to display the Manual programme menu.

4. Press the

D / E

button to select PR..

5. Press the Gbutton to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the

PR. pull-down menu. Any number

under 10 is entered with a numeric ‘0’ (or ‘00’) in front of it, i.e.
‘05’ (or ‘005’) for 5.

6. Press the OK button.

7. Press the

D / E

button to select System.

8. Press the

G

button,Select a TV system with the

D / E

button

on the System pull-down menu;

BG : (Asia/New Zealand/M.East/Africa/Australia)
I : (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M

: (USA/Korea/Philippines) (option)

9. Press the OK or Fbutton.

10. Press the

D / E

button to select Channel.

11. Press the Gbutton. Press the

D / E

button to select V/UHF

or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric ‘0’ (or
‘00’) in front of it, i.e. ‘05’ (or ‘005’) for 5.

12. Press the OK or Fbutton.

13. Press the

D / E

button to select Search.

14. Press the Gbutton. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.

15. Press the OK button to store it. The display Stored will appear.

16. To store another station, repeat steps 4 to 15.

17. Press the TV/AV button to return to normal TV viewing.

10

123

456

789

MENU

TV/AV

0

( )

PR

( )

PR

OK

VOLVOL

Station

Menu

( )

( )

CH.

AutoOprogramme

{

ManualOprogramme

{

Program meOedit

{

FavoriteOprogramme

{

Language

{

()O{OOKOMENUOTV®AV

PR.

{

System

{

Channel

{

Fine

{

Search

{

Name

{

Booster

{

OO 9

()O}{OOKOMENUOTV®AV

PR.

{

PR.

{

System

{

Channel

{

Fine

{

Search

{

Name

{

Booster

{

{{{{

Stored

Search

{

123

456

789

MENU

TV/AV

0

( )

PR

( )

PR

OK

VOLVOL

Setting up TV stations

Assigning a station name

1. Repeat the ‘Manual programme tuning’ steps 1 to 3.

2. Press the

D / E

button to select Name.

3. Press the Gbutton on the Name pull-down menu.

4. Press the

D

button. You can use a blank, +, -, the numeric 0 to 9

and the alphabet A to Z.
With the Ebutton you can select in the opposite direction.

5. Select the next position by pressing the F / Gbutton and then
take your choice of the second character, and so on.

6. Press the OK button.

7. Press the TV/AV button to return to normal TV viewing.

Booster (option)

When the interference between programmes appear, select Booster
to Off.

1. Repeat the ‘Manual programme tuning’ steps 1 to 3.

2. Press the

D / E

button to select Booster.

3. Press the Gbutton.

4. Press the

D / E

button to select On or Off on the Booster pull-

down menu.

5. Press the OK or F button.

6. Press the TV/AV button to return to normal TV viewing.

Fine tuning

Normally fine tuning is only necessary if reception is poor.

1. Repeat the ‘Manual programme tuning’ steps 1 to 3.

2. Press the

D / E

button to select Fine.

3. Press the Gbutton.

4. Press the F / G button to fine tune for the best picture and
sound on the

Fine pull-down menu.

5. Press the OK button.

6. Press the TV/AV button to return to normal TV viewing.
The finely tuned programme will be indicated by a gray number
during programme selection.

11

Station

Menu

CH.

AutoOprogramme

{

ManualOprogramme

{

Program meOedit

{

FavoriteOprogramme

{

Language

{

()O{OOKOMENUOTV®AV

PR.

{

System

{

Channel

{

Fine

{

Search

{

Name

{

Booster

{

{{{{

}{OOKOMENUOTV®AV

Fine

{

Setting up TV stations

12

123

456

789

MENU

TV/AV

0

( )

PR

( )

PR

OK

VOLVOL

Programme edit

This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.

1. Repeatedly press the MENU button to select the Station menu.

2. Press the Gbutton and then

D / E

button to select Programme

edit

.

3. Press the Gbutton to display the Programme edit menu.

Deleting a programme

1. Select a programme to be deleted with the

D / E

or F / G button.

2. Press the RED button twice.
The selected programme is deleted, all the following pro­grammes are shifted up one position.

Copying a programme

1. Select a programme to be copied with the

D / E

or F / Gbutton.

2. Press the GREEN button.
All the following programmes are shifted down one position.

Moving a programme

1. Select a programme to be moved with the

D / E

or F / Gbutton.

2. Press the YELLOW button.

3. Move the programme to the desired programme number with
the

D / E

or F / Gbutton.

4. Press the YELLOW button again to release this function.

Skipping a programme number

1. Select a programme number to be skipped with the

D / E

or F /

G

button.

2. Press the BLUE button. The skipped programme turns to blue.

3. Press the BLUE button again to release the skipped pro­gramme.
When a programme number is skipped it means that you will be
unable to select it using the

D / E

button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.

Press the TV/AV button to return to normal TV viewing.

Station

Menu

CH.

AutoOprogramme

{

ManualOprogramme

{

Program meOedit

{

FavoriteOprogramme

{

Language

{

()O{OOKOMENUOTV®AV

()O}{OOKOMENUOTV®AV

00O

-O-O-O-O-

OO05O SO 6O9
01O CO 0O3OO06O SO 1O7
02O CO 1O2OO07O SO 2O2
03O SO 6O6OO08O CO 0O9
04O SO 6O7OO09O CO 1O1

DeleteOOOCopy

MoveOOOOOSkip

00O

-O-O-O-O-

MENUOTV®AV

00O

-O-O-O-O-

OO05O SO 6O9
01O CO 0O3OO06O SO 1O7
02O CO 1O2OO07O SO 2O2
03O SO 6O6OO08O CO 0O9
04O SO 6O7OO09O CO 1O1

00O

-O-O-O-O-

Delete

()O}{OMENUOTV®AV

00O

-O-O-O-O-

OO05O SO 6O9
01O CO 0O3OO06O SO 1O7
02O CO 1O2OO07O SO 2O2
03O SO 6O6OO08O CO 0O9
04O SO 6O7OO09O CO 1O1

00O

-O-O-O-O-

MoveOOff

123

456

789

MENU

TV/AV

0

Q.VIEW

LIST

( )

PR

( )

PR

OK

VOLVOL

Favorite programme

This function lets you select your favorite programmes directly.

1. Repeatedly press the MENU button to select the Station menu.

2. Press the Gbutton and then

D / E

button to select Favorite

programme.

3. Press the Gbutton to display the Favorite programme menu.

4. Press the

D / E

button to select -- -----.

5. Select a desired programme with the F / G button or NUMBER

buttons. Any number under 10 is entered with a numeric ‘0’ (or
‘00’) in front of it, i.e. ‘05’ (or ‘005’) for 5.

6. To store another programme, repeat steps 4 to 5.
You can store up to 5 programmes.

7. Press the OK button.

8. Press the TV/AV button to return to normal TV viewing.

Repeatedly press the Q.VIEW button to select stored favorite pro-
grammes.

Calling the programme table

You can check the programmes stored in the memory by displaying
the programme table.

Displaying programme table

Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.

Note :

a. You may find some blue programmes. They have been set up to

be skipped by auto programming or in the programme edit mode.

b. Some programmes with the channel number shown in the pro-

gramme table indicate there is no station name assigned.

Selecting a programme in the programme table

Select a programme with the

D / E

or F / G button.

Then press the OK button.
The set switches to the chosen programme number.

Paging through a programme table

There are 10 (or 20) programme table pages in which contain 100
(or 200) programmes.
Pressing the

D / E

or F / Gbutton repeatedly turns the pages.

Press the TV/AV button to return to normal TV viewing.

Setting up TV stations

13

CH.

AutoOprogramme

{

ManualOprogramme

{

Program meOedit

{

FavoriteOprogramme

{

Language

{

FavoriteOprogramme

{

()O}OOKOMENUOTV®AV

SOff
S56n Ca 05
S

--O--O-O-O-O-

S

S

--O--O-O-O-O-

S --O

--O-O-O-O-

S --O

--O-O-O-O-

SOff

Station

Menu

CH.

AutoOprogramme

{

ManualOprogramme

{

Program meOedit

{

FavoriteOprogramme

{

Language

{

()O{OOKOMENUOTV®AV

()O}{OOKOMENUOTV®AV

00O

-O-O-O-O-

OO05O SO 6O9
01O CO 0O3OO06O SO 1O7
02O CO 1O2OO07O SO 2O2
03O SO 6O6OO08O CO 0O9
04O SO 6O7OO09O CO 1O1

00O

-O-O-O-O-

Picture adjustment

14

MENU

TV/AV

( )

PR

( )

PR

OK

VOLVOL

PSM

Picture

Menu

PSM (Picture Status Memory)

1. Repeatedly press the MENU button to select the Picture menu.

2. Press the Gbutton and then

D / E

button to select PSM.

3. Press the Gbutton and then

D / E

button to select a picture

setting on the PSM pull-down menu.

4. Press the OK or F button.

5. Press the TV/AV button to return to normal TV viewing.

You can also recall a desired picture (Dynamic, Standard,

Mild, Game or User) with PSM button on the remote control. The

picture Dynamic, Standard, Mild and Game are programmed
for good picture reproduction at the factory and cannot be changed.

Picture adjustment

You can adjust picture contrast, brightness, colour intensity, sharp­ness and tint (NTSC input only) to the levels you prefer.

1. Repeatedly press the MENU button to select the Picture menu.

2. Press the Gbutton and then

D / E

button to select User.

3. Press the Gbutton and then

D / E

button to select the desired

picture item on the User pull-down menu.

4. Press the Gbutton.

5. Press the F / G button to make appropriate adjustments on the
each sub menu.

You can also select other User items directly with

D / E

button

and adjust them with F / G button.

6. Press the OK button to store it for the picture User.

7. Press the TV/AV button to return to normal TV viewing.

CH.

PSM

{

User

{

PSM

{

SDynamic

SStandard
SMild
SGame
SUser

()O}OOKOMENUOTV®AV

()O}{OOKOMENUOTV®AV

Contrast 80

PSM

{

User

{

User

{

CContrast

{

CBrightness

{

CColour

{

CSharpness

{

CTint

{

CBrightness

{

CColour

{

CSharpness

{

CTint

{

()O}{OOKOMENUOTV®AV

CH.

PSM

{

User

{

()O{OOKOMENUOTV®AV

CH.

Picture adjustment

Eye (option)

On some models, the set will automatically adjust the picture
according to the surrounding conditions. This will enable you to
enjoy the most suitable picture according to the surroundings.

Press the EYE/*button to switch the eye function on or off.

When the eye function is on, the most suitable picture is automati­cally adjusted according to the surrounding conditions.
At this time the display in green does not appear continuously
but the display in yellow appears each time the picture condi­tion changes.

Note : If you press the PSM or TURBO PICTURE button with the
eye function, the eye function is automatically switched off.

Turbo picture selection (option)

When this function is on, the picture will be more brilliant and dis­tinct picture than normal picture. You can enjoy the Turbo picture so
much better than normal picture.
Repeatedly press the TURBO PICTURE button to switch on or off.

Note : If you press the PSM or EYE/*button with the Turbo picture
function, the Turbo picture function is automatically switched off.

15

EYE/

PSM

TURBO/

PICTURE

(Turbo Picture off)

TURBO

(Turbo Picture on)

Off

Sound adjustment (option)

16

MENU

TV/AV

( )

PR

( )

PR

OK

VOLVOL

SSM/

Sound adjustment is an optional function only a set with sound
adjustment can perform this function.

SSM (Sound Status Memory)

You can select your preferred sound setting; Flat, Music, Movie or
Speech and you can also adjust the sound frequency of the equal­izer. The surround sound creates an all around sound as in a con­cert hall.

1. Repeatedly press the MENU button to select the Sound menu.

2. Press the

G

button and then

D / E

button to select SSM.

3. Press the

G

button and then

D / E

button to select a sound set-

ting on the

SSM pull-down menu.

Sound Frequency Adjustment

a. Press the

G

button in User to display the User sub menu.

b. Select a sound band by pressing the

F / G

button.

c. Make appropriate sound level with the

D / E

button.

d. Press the OK button to store it for the sound

User.

The display Stored appears.

Press the TV/AV button to return to normal TV viewing.

You can also recall a desired sound (Flat, Music, Movie,

Speech or User) with SSM/

*

button on the remote control. The

sound Flat, Music, Movie and Speech are programmed for opti-
mum sound reproduction at the factory and cannot be changed.

Note : If you press the SSM/*button after making appropriate
adjustment on the User sub menu, the display User automatically
appears even though you have already set a factory preset setting;

Flat, Music, Movie or Speech.

Sound

Menu

CH.

SSM

{

Balance

{

SSM

{

()O}OOKOMENUOTV®AV

FFlat
FMusic
FMovie
FSpeech
FUser

{

FFlat

()O}{OOKOMENUOTV®AV

0.1O0.5O1.5O5.0O10OkHz

(RF STEREO, Flat)

()O}{OOKOMENUOTV®AV

0.1O0.5O1.5O5.0O10OkHz

(AV STEREO, Flat)

CH.

SSM

{

Balance

{

()O{OOKOMENUOTV®AV

Sound adjustment (option)

17

MENU

TV/AV

I / II /

( )

PR

( )

PR

OK

VOLVOL

TURBO/

SOUND

Balance adjustment

You can adjust balance.

1. Repeatedly press the MENU button to select the Sound menu.

2. Press the Gbutton and then

D / E

button to select Balance.

3. Make desired adjustment with the F / G button on the Balance
pull-down menu.

4. Press the OK button.

5. Press the TV/AV button to return to normal TV viewing.

Turbo sound selection (option)

When this function is on, the sound will be more emphasized and
amplified sound than normal sound. You can enjoy the Turbo
Sound so much better than normal Sound.
Repeatedly press the TURBO SOUND button to switch on or off.

Sound output selection

In AV mode, you can select output sound for the left and right loud­speakers.

Repeatedly press the I/II/*button to select the sound output.

L+R : Audio signal from audio L input is sent to left loud-speaker

and audio signal from audio R input is sent to right loud­speaker.

L+L : Audio signal from audio L input is sent to left and right loud-

speakers.

R+R : Audio signal from audio R input is sent to left and right loud-

speakers.

Sound

Menu

(Turbo Sound off)

TURBO

(Turbo Sound on)

CH.

SSM

{

Balance

{

()O{OOKOMENUOTV®AV

CH.

SSM

{

Balance

{

Balance

{

}{OOKOMENUOTV®AV

FFFFF0

Sound adjustment (option)

Stereo/Dual reception (option)

When a programme is selected, the sound information for the sta­tion appears after the programme number and station name disap­pear.

Mono sound selection

In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II/*button twice. In mono reception the
depth of sound is improved. To switch back to stereo, press the

I/II/*button twice again.

Language selection for dual language broadcast

If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II/*but­ton repeatedly.

DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-

speakers.

DUAL I+II sends a separate language to each loudspeaker.

NICAM reception (option)

If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II/*button repeatedly.

1. When NICAM mono is received, you can select

NICAM

MONO

or FM MONO.

2. When NICAM stereo is received, you can select NICAM

STEREO

or FM MONO. If the stereo signal is weak, switch to

FM mono.

3. When NICAM dual is received, you can select

NICAM DUAL

I

, NICAM DUAL II or NICAM DUAL I+II or MONO. When

FM mono is selected the display MONO appears on the
screen.

I / II /

18

Broadcast
Mono
Stereo
Dual

On Screen Display

MONO
STEREO
DUAL I

Other functions

TV and AV modes

Inputs can be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.

Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the ‘Connection of external equipment’ section.

1. Repeatedly press the MENU button to select the Special menu.

2. Press the Gbutton and then

D / E

button to select Input.

3. Press the Gbutton and then

D / E

button to select TV, AV or

COMPONENT(option) on the Input pull-down menu.

AV : VCR connected to the Euro scart socket or AV sockets on
the set
DVD : COMPONENT connected to the COMPONENT sockets
on the set (option)

4. Press the TV/AV button to return to normal TV viewing.

Note :If both the input jacks on the front/side panel and back
panel have been connected to external equipments simultane­ously, only the input jacks on the front/side panel can be received.

Alternatively you can select the TV or AV mode by pressing the
TV/AV button.

In AV mode, to return to TV mode, press the

D / E

or NUMBER but-

tons.

Auto AV switching (option)

If your VCR outputs a switching voltage when connected to the
Euro scart socket, the set will switch to AV mode automatically.
The set is automatically switched to AV mode when an AV signal
is input. But if you want to keep on watching TV mode, press the

D / E

or NUMBER buttons.

Press the TV/AV button to return to AV modes.

Child lock

The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.

1. Repeatedly press the MENU button to select the Special menu.

2. Press the Gbutton and then

D / E

button to select Child lock.

3. Press the Gbutton and then

D / E

button to select On or Off on

the Child lock pull-down menu.

4. Press the TV/AV button to return to normal TV viewing.

With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.

Note : The display Child lock on will not appear on the screen if
any button on the front panel is pressed while displaying the menus.

19

123

456

789

MENU

TV/AV

0

( )

PR

( )

PR

OK

VOLVOL

Special

Menu

CH.

Input

{

ChildOlock

{

AutoOsleep

{

BlueOback

{

AVL

{

CSM

{

Game

{

Timer

{

Input

{

()O}OOKOMENUOTV®AV

TTV
TAV
TCOMPONENT

T TV

CH.

Input

{

ChildOlock

{

AutoOsleep

{

BlueOback

{

AVL

{

CSM

{

Game

{

Timer

{

()O{OOKOMENUOTV®AV

Other functions

Auto sleep

If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten min­utes after a TV station stops broadcasting.

1. Repeatedly press the MENU button to select the Special menu.

2. Press the Gbutton and then

D / E

button to select Auto sleep.

3. Press the

G

button and then

D / E

button to select On or Off on

the Auto sleep pull-down menu.

4. Press the TV/AV button to return to normal TV viewing.

Blue back (option)

If you select On on the Blue back pull-down menu, the blue back­ground appears on the screen when there is no or poor signal.

1. Repeatedly press the MENU button to select the Special menu.

2. Press the

G

button and then

D / E

button to select Blue back.

3. Press the

G

button and then

D / E

button to select On or Off on

the

Blue back pull-down menu.

4. Press the TV/AV button to return to normal TV viewing.

AVL (Auto Volume Leveler) (option)

If you select AV L O n , the set automatically keeps on an equal vol­ume level even if you change programmes.

1. Repeatedly press the MENU button to select the Special menu.

2. Press the Gbutton and then

D / E

button to select AV L .

3. Press the Gbutton and then

D / E

button to select On or Off on

the AVL pull-down menu.

4. Press the TV/AV button to return to normal TV viewing.

CSM (Colour Status Memory)

You can select the picture colour status; standard, reddish, greenish
or bluish, as you prefer.

1. Repeatedly press the MENU button to select the Special menu.

2. Press the Gbutton and then

D / E

button to select CSM.

3. Press the Gbutton and then

D / E

button to select Standard,

Reddish, Greenish or Bluish on the CSM pull-down menu.

4. Press the TV/AV button to return to normal TV viewing.

Sleep timer

You don’t have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The dis­play

rr

--:--

will appear on the screen, followed by 00:10, 00:20,

00:30, 01:00, 01:30, 02:00, 03:00 and 04:00. The timer begins to

count down from the number of minutes selected.

Note :

a. To view the remaining sleep time, press the SLEEP button once.
b. To cancel the sleep time, repeatedly press the SLEEP button

until the display

rr

--:--

appears.

c. When you switch the set off, the set releases the preset sleep

time.

20

MENU

TV/AV

( )

PR

( )

PR

OK

VOLVOL

SLEEP

Special

Menu

CH.

Input

{

ChildOlock

{

AutoOsleep

{

BlueOback

{

AVL

{

CSM

{

Game

{

Timer

{

()O{OOKOMENUOTV®AV

21

MENU

TV/AV

( )

PR

( )

PR

OK

VOLVOL

Game (option)

Game is an optional function, only a set with game can perform this
function by using the remote control handset. You can enjoy only
two of four games below with this set.

Block & Balloon (option)

1. Repeatedly press the MENU button to select the Special menu.

2. Press the Gbutton and then

D / E

button to select Game.

3. Press the

G

button to enter the game mode.

4. Press the F / Gbutton to select the game 1 or 2 and then press
the OK button.

5. Press the F / Gbutton to select a level and then press the OK
button.

1. Block

6. Press the

D / E

button to select a block to shoot or to dump.

Press the

F

button to shoot the block aiming at the same colour
or press theGbutton to dump it. Remove all the blocks on the
screen with given blocks, whose remaining number is displayed
on the right bottom of the screen. If you use up all the given
blocks or the dumped blocks are accumulated to the end, you
lose. Press the OK button to start.

2. Balloon

6. Press the

D / E

button to move the arrow.
Press the Fbutton to shoot an arrow aiming balloon only.
The numbers of balloons you should hit and have hit are dis­played on the right bottom of the screen. If you miss a balloon,
it will be accumulated and you lose the space to move the
arrow. If the missed balloons or the hit bricks are accumulated
at the end, you lose. Press the OK button to start.

Cricket & Car racing (option)

1. Repeatedly press the MENU button to select the Special menu.

2. Press the

G

button and then

D / E

button to select Game.

3. Press the

G

button to enter the game mode.

4. Press the

F / G

button to select the game 1 or 2 and then press

the OK button.

1. Cricket

5. Press the

D / E

button to select a number of overs to play, then

press the OK button.

6. Press the

D / E

button to select a your team, then press the OK

button.

7. Press the

D / E

button to select a computer team, then press

the OK button.

8. Press the

D / E

button to select a uniform colour of your team,
then press the OK button.

9. Press the F / Gbutton to select HEADS or TAILS, then press

the OK button.

10. Press the

D / E

button to select BATTING or FIELDING, then

press the OK button.

11. Press the

D / E

button to select a bowler type, then press the

OK button to start the game.
For fielding, first select a ball type with the

F / G

button and then

press the OK button. Secondly select a bowl direction with the

F / G

/

D / E

button and then press the OK button to throw the

ball. For batting, select a hitter position with the F / G /

D / E

button and then press the OK button to hit the ball. After hitting
the ball, control the hitter with the

D / E

button.

2. Car racing

5. Press the

D / E

button to select a round, then press the OK but-

ton to start the game.
Control the car with the F / G /

D / E

button.

Note :

a. Press the TV/AV or MENU button to return to the normal TV

viewing.

b. If you want a new game, press the RED button to start during

the game.

Special

Menu

CH.

Input

{

ChildOlock

{

AutoOsleep

{

BlueOback

{

AVL

{

CSM

{

Game

{

Timer

{

()O{OOKOMENUOTV®AV

22

Timer (option)

MENU

TV/AV

( )

PR

( )

PR

OK

VOLVOL

Timer adjustment is an optional function only a set with timer adjust­ment can perform this function.

Off timer

The off timer automatically switches the set to standby after the pre­set time elapses.

1. Repeatedly press the MENU button to select the Special menu.

2. Press the Gbutton and then

D / E

button to select Timer.

3. Press the Gbutton and then

D / E

button to select Off timer.

4. Press the Gbutton.

5. Select and adjust hour and minute by pressing the

F / G

but-

ton.

6. Press the OK button.

7. Press the TV/AV button to return to normal TV viewing.

On timer

The on timer automatically switches on after the preset time elaps­es with desired programme number and volume.

1. Repeatedly press the MENU button to select the Special menu.

2. Press the Gbutton and then

D / E

button to select Timer.

3. Press the Gbutton and then

D / E

button to select On timer.

4. Press the Gbutton and then

D / E

button to select the desired

timer item;

--:--

, Programme or Volume.

5. Make desired adjustment with the

F / G

button on each pull-

down menu.

6. Press the OK button.

7. Press the TV/AV button to return to normal TV viewing.

You can set the on/off timer from 10 minutes up to 12 hours 50 min­utes in 10 minutes steps. The timer begins to count down from the
selected time period.

Note :
a. This set must be put into standby mode with the POWER button

on the remote control to operate the on timer function.

b. To view the remaining on/off time, select Timer menu.
c. To cancel the set on/off time, set the on/off timer to --:--.
d. When you switch the power off, the on/off time is reset.

CH.

Input

{

ChildOlock

{

AutoOsleep

{

BlueOback

{

AVL

{

CSM

{

Game

{

Timer

{

()O{OOKOMENUOTV®AV

Special

Menu

Offotimer

{

On otimer

{

-i-i:i-i-

Programme

o1

Volume

ooo30

()O}{OOKOMENUOTV®AV

On otimer

{

Offotimer

{

On otimer

{

-i-i:i-i-

()O}{OOKOMENUOTV®AV

Off otimer

{

Teletext (option)

Teletext (or TOP text) is an optional function, therefore only a set
with the teletext system can receive the teletext broadcast.

Teletext is a free service broadcast by most TV stations which gives
up-to-the-minute information on news, weather, television pro­grammes, share prices and many other topics.

The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a num­ber of pages which are selected by directly entering the corre­sponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.

Switch on/off

Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selec­tion, while the second shows the current page displayed.
Press the TV/AV button to switch off teletext. The previous mode
reappears.

SIMPLE text

Page selection

1. Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong num­ber, you must complete the three digit number and then re­enter the correct page number.

2. The

D / E

button can be used to select the preceding or fol-

lowing page.

Programming a colour button in LIST mode

If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the

button to switch to LIST mode.

Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.

1. Press a coloured button.

2. Using the NUMBER buttons, select the page you wish to pro­gramme.

3. Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
select this page with the same coloured button.

4. The three other coloured buttons are programmed in this way.

23

123

456

789

MENU/INDEX

TV/AV

TV

0

TEXT

( )

PR

( )

PR

OK

M

M

Teletext (option)

TOP text (option)

The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.

Block / group / page selection

1. With the blue button you can progress from block to block.

2. Use the yellow button to proceed to the next group with auto­matic overflow to the next block.

3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.

4. The red button permits to return to previous selection.
Alternatively the E button can be used.

Direct page selection

Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.

FASTEXT

The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.

Page selection

1. Press the INDEX button to select the index page.

2. You can select the pages which are colour coded along the bot­tom line with the same coloured buttons.

3. Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.

4. The

D / E

button can be used to select the preceding or fol-

lowing page.

24

123

456

789

INDEX

0

i

( )

PR

( )

PR

Teletext (option)

Special teletext functions

REVEAL/

Press this button to display concealed information, such as
solutions of riddles or puzzles.
Press this button again to remove the information from the
display.

SIZE/

Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the
page.
Press this button again to return to the normal display.

UPDATE/

Displays the TV picture on the screen while waiting for the new
teletext page. The display will appear at the top left hand
corner of the screen. When the updated page is available then
display will change to the page number.

Press this button to view the updated teletext page.

HOLD/

Stops the automatic page change which will occur if a tele­text page consists of 2 or more sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
stop symbol is displayed at the top left-hand corner of the
screen and the automatic page change is inhibited.
To continue press this button again.

MIX/

Displays the teletext pages superimposed on the TV pic­ture.
To switch the TV picture off press this button again.

TIME/

When viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
change the sub page, press the RED / GREEN,

D / E

or
NUMBER buttons.
Press this button again to exit this function.

25

123

456

789

0

MIX SIZE/ HOLD/

( )

PR

( )

PR

UPDATE/XTIME/ REVEAL/

?

Connection of external equipment

You can connect additional equipment, such as VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.

Aerial socket

1. Connect the RF out socket of the VCR to the aerial socket on
the back of the set.

2. Connect the aerial cable to the RF aerial in socket of the VCR.

3. Store the VCR channel on the programme number 0 using the
‘Manual programme tuning’ section.

4. Select the programme number where the VCR channel is
stored.

5. Press the PLAY button on the VCR.

Audio-L/R(or Audio)/Video in/out sockets (option)

1. Connect the audio/video out sockets of the VCR to the Audio­L/R(or Audio)/video in sockets of the set and in sockets of the
VCR to out sockets of the set. The mono model has one audio
socket.

2. If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV .

3. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.

You can also record programmes received by the TV on video
tape via audio/video out sockets.

Note :

a. If both the input jacks on the front/side panel and back panel

have been connected to external equipments simultaneously,
only the input jacks on the front/side panel can be received.

b. In the mono models with cricket and car racing games, the TV

screen picture isn’t output through the audio/video out sockets.

26

ANT IN

75Ω

L

L

OUT

DVD INPUT (480i)

IN

YPBP

R

R

L

AUDIO

VCR

COMPONENT

VIDEO (L)-AUDIO-(R)

MENU OK VOL PR

VCR

75Ω

ANT IN

IN

OUT

VIDEO AUDIO

VCR

VCR

75Ω

ANT IN

VIDEO

(L) - AUDIO - (R)

IN

OUT

ANT IN

75Ω

L

L

OUT

DVD INPUT (480i)

IN

YPBP

R

R

L

AUDIO

VIDEO (L)-AUDIO-(R)

VCR

COMPONENT

Connection of external equipment

Euro scart socket (option)

1. Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.

2. Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when connected to a
Euro scart socket, the set will switch to AV mode automatically.
But if you want to keep on watching TV mode, press the

D / E

or NUMBER buttons.

Otherwise press the TV/AV button on the remote control hand­set to select

AV . The VCR playback picture appears on the

screen.

You can also record programmes received by the TV on video
tape.

Note : If you want to watch the signals from the input jacks on the
front/side panel, disconnect the Euro scart socket of the VCR from
the Euro scart socket on the back of the set.

Component in sockets (option)

1. Connect the COMPONENT video output sockets (Y Cb Cr, Y
Pb Pr or Y B-Y R-Y) of the COMPONENT (480i) to the COM­PONENT DVD INPUT sockets (Y P

B PR) on the set.

2. Connect the audio cable from the COMPONENT to COMPO­NENT AUDIO sockets on the set.

3. Press the TV/AV button to select COMPONENT.

4. Press the PLAY button on the COMPONENT.
The COMPONENT playback picture appears on the screen.

Headphone socket (option)

Only models which have a headphone socket can perform this
function.
Insert the headphone plug to the headphone socket of the set.
You can listen to the sound through the headphones. To adjust the
headphone volume, press the

F / G

button.

If you press the MUTE button, the sound from the headphone’s is
switched off.

27

COMPONENT

ANT IN

75Ω

L

L

OUT

DVD INPUT (480i) COMPONENT

IN

YPBP

R

R

L

AUDIO

VIDEO (L)-AUDIO-(R)

MENU OK VOL PR

VCR

ANT IN

75Ω

L

L

Troubleshooting check list

Symptoms

No picture, no sound

Sound OK, poor picture

Picture OK, poor sound

Picture blurred

Lines or streaks in picture

Poor reception on some channels

No colour

Poor colour

Remote control does not work

The mains plug-(plugged in and
switched on)

Is the TV switched on

Try another channel (weak signal)

Check aerial (plugged into TV?)

Check aerial (broken lead?)

Check aerial

Check for local interference

Adjust contrast

Adjust brightness

Adjust colour

Adjust volume

Check the batteries in remote control

Check Audio/Video sockets (VCR only)

Check these items and try to
adjust these