LG RH397D, RH399D User Guide

Download

ENGLISH

RH397D/RH399D

P/NO : MFL56778744

As an ENERGY

STAR

Partner, LG has determined that this product or product models meet the ENERGY

STAR

guidelines for

energy efficiency.

ENERGY

STAR

is a U.S. registered mark.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 1

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE

COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a confined space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

CAUTION:CLASS 3B VISIBLE AND INVISIBLE LASER

RADIATION WEN OPEN AND INTERLOCKS DEFEATED AVOID EXPOSER TO THE BEAM.

CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service centre. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.

CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an LG authorized service centre. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

 The appliance is not intended for use by young children or frail persons

without supervision.

 Young Children should be supervised to ensure that they do not play with

appliance.

 If the appliance is supplied from a cord extension set or an electrical portable

outlet device, the cord extension set or electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 2

Copyrights

 Recording equipment should be used only for lawful copying and you are

advised to check carefully what is lawful copying in the area in which you are making a copy. Copying of copyright material such as films or music is unlawful unless permitted by a legal exception or consented to by the rights owner.

 This product incorporates copyright protection technology that is protected by

method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited.

 CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVI-

SION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p HDD/DVD RECORDER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

Open source software notice

This product includes

 Zlib compression library developed by Jean-loup Gailly and Mark Adler.

 Doubly Linked List licensed by Artistic license.

You can download this software from http://freshmeat.net/projects/linklist/

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 3

Contents

Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-13

Operating USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . .13

Auto setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15

Using the Home Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-16

Adjust the SETUP settings . . . . . . . . . . . . . . . . . . . . . . .16-21

Displaying disc Information . . . . . . . . . . . . . . . . . . . . . . .21-23

Using the digital EPG . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25

Play a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25-26

Playing DivX

movie files . . . . . . . . . . . . . . . . . . . . . . . . .27-28

Listening to a music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Viewing a photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-33

Editing a title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-36

Dubbing a title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39-40

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 4

Before you start

Recordable and Playable discs

This unit can play and record all widely-used DVD types. The table below shows some specific compatibility differences depending on the disc types.

Playable discs

The table below shows the file formats and media types that this unit can playback.

HDD DVD-R DVD-RW DVD-RAM DVD+R DVD+R(DL) DVD+RW

Symbol used in this manual

Logos

Re-Writable

Formatting Mode (new discs)

Editing

Play on other players

Recommended discs

Yes No Yes Yes No No Yes

– Video mode Video mode VR mode Auto Auto Auto

Yes Limited Yes Yes Limited Limited Yes

– The player must be compatible with corresponding media and the media has to be finalized.

Mitsubishi(8x,16x) Mitsubishi(4x) Mitsubishi(3x) Mitsubishi(8, 16x) Mitsubishi(2.4x, 8x) Mitsubishi(4x)

– Verbatim(8x,16x) Verbatim(4x) Maxell(5x) Verbatim(8x,16x) HP(4x)

JVC(4x) Verbatim(4x)

Maxell(4x) Ricoh(4x)

+RW+R+RRAM-RW

Video

-RW

-RHDD

DVD Audio CD Data disc (DivX, JPEG, MP3 or WMA)

Symbol used in this manual

Logos

Characteristics

WMAMP3

JPEG

DivXACDDVD

Music CDs or CD-R/RWs in music CD format that can be purchased

Discs such as movies that can be purchased or rented.

Discs that contain DivX, JPEG, MP3 or WMA files.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 5

Notes on discs

 Depending on the conditions of the recording equipment or the CD-R/RW (or

DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.

 Do not attach any seal or label to either side (the labeled side or the record-

ed side) of a disc.

 Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing

so may result in malfunctions.

 Depending on the recording software & the finalization, some recorded discs

(CD-R/RW or DVD±R/RW) may not be playable.

 DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal

computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Unit’s lens.

 If you record a disc using a personal computer, even if it is recorded in a

compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

 This unit requires discs and recordings to meet certain technical standards

in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback.

 Customers should note that permission is required in order to download

MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

Availability of copying or moving feature

From To MP3/WMA JPEG DivX Title*

HDD DISC - - - Yes

DISC HDD Yes Yes Yes Yes

USB drive HDD Yes Yes Ye s -

*1 The title is recorded from this unit.

Restrictions on copying

Some video material is copy-once protected: Such material cannot be copied to HDD or DVD. You can identify copy-once protected material during playback by displaying disc information on-screen.

 NTSC format signals from the analog or the DV inputs is not recorded cor-

rectly with this unit.

 Video signals in SECAM format (from the built-in TV tuner or from the ana-

log inputs) are recorded in PAL format.

About the Symbol Display

“ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media.

Regional Codes

This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or “ALL”.

 Most DVD discs have a globe with one or more numbers in it clearly visible

on the cover. This number must match your unit’s regional code or the disc cannot play.

 If you try to play a DVD with a different regional code from the unit, the mes-

sage “Incorrect region code. Can’t play back” appears on the TV screen.

Remote Control Operation

Point the Remote Control at the remote sensor and press the buttons.

emote Control Battery Installation

Remove the battery cover on the rear of the Remote Control, and insert R03 (size AAA) battery with 3 and # matched correctly.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 6

Remote control

        a        

AV/INPUT: Changes the input source (Tuner, AV1-2, or DV IN).

OPEN/CLOSE: Opens and closes the disc tray.

POWER: Switches the unit ON or OFF.

DVD: Selects the unit’s mode to DVD.

HDD: Selects the unit’s mode to HDD.

AUDIO ( ): Selects an audio language or audio channel.

TITLE: Displays the disc’s Title menu, if available.

        b        

HOME: Accesses or removes the HOME menu.

DISPLAY: Accesses On-Screen Display.

MENU/LIST: Accesses menu on a DVD disc. Switches

between Title List-Original and Title List-Playlist menu.

b / B / v / V (left/right/up/down):

Used to navigate on-screen displays.

(ENTER): Acknowledges menu selection or displays the

program list. PR/CH (v/V): Scans up or down through memorized

channels.

RETURN (O): Removes the on-screen displays. REC(z): Starts recording. Press repeatedly to set the

recording time.

MARKER: Selects multiple files/titles on the list.

        c        

PLAY (N): Starts playback. STOP (x): Stops playback or recording. PAUSE/STEP (X): Pause playback or recording temporarily. SCAN (m / M): Search backward or forward. SKIP (. / >): Go to next or previous chapter/track/file.

        d        

Color buttons: Use when an EPG screen is displayed or when tuned to a teletext program of a digital broadcast. The function of each button will be described on-screen, and changes depending on the screen being displayed.

FAV: Displays the favorite program list.

REPEAT: Repeat sequence, chapter, track, title, all.

SUBTITLE: Selects a subtitle language.

TEXT: Switches between teletext mode and normal TV

viewing.

EPG: Displays the EPG menu.

TIMESHIFT: Activates pause live TV/playback (timeshift) for

a live TV program.

CLEAR: Removes a track number on the Program List.

0-9 numerical buttons: Selects numbered options in a

menu.

TV Control Buttons: You can control the sound level, input source, and power switch of your TV.

: This button is not available.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 7

/ I (POWER button)

Switches the unit ON or OFF.

b Disc Tray

Insert a disc here.

c DVD

Set the recorder’s mode to DVD.

d OPEN/CLOSE (Z)

Opens or closes the disc tray.

e HDD

Set the recorder’s mode to HDD.

f Display window

Shows the current status of the unit.

T/S: Indicates the timeshift mode.

REC: The unit is recording.

HDD: The unit is HDD mode.

DVD: The unit is DVD mode. HDD bBDVD: The unit is dubbing.

: Indicates when the unit is in timer recording or a timer recording is pro-

grammed.

: Indicates clock, total playing time, elapsed time, title number,

chapter/track number, channel, etc.

g Remote Sensor

Point the remote control here.

h N / X (PLAY / PAUSE)

Starts playback. Pause playback or recording temporarily, press again to exit pause mode.

i x (STOP)

Stops playback or recording.

j z (REC)

Starts recording. Press repeatedly to set the recording time.

k RESOLUTION

Sets the output resolution for HDMI and COMPONENT OUTPUT jacks.

- HDMI: 576i, 576p, 720p, 1080i, 1080p

- COMPONENT: 576i, 576p

l USB Port

Connect a USB Flash Memory.

m DV IN

Connect the DV output of a digital camcorder.

n AV IN 2 (VIDEO IN/AUDIO IN (Left/Right))

Connect the audio/video output of an external source (Audio system, TV/ Monitor, VCR, Camcorder, etc.).

Main Unit

lm n

abcdefghijk

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 8

Hooking up the unit

a Antenna connection

Connect the Terrestrial TV antenna to the ANTENNA IN jack on the unit. If you want to use an indoor antenna, use one with a signal amplifier rated at 5V, 100mA and set [Antenna Feed 5V] to [ON] in the setup menu.

b Antenna connection to

your TV

Connect one end of the RF cable to ANTENNA OUT jack on the unit and other end to ANTENNA IN jack on your TV. Passes the signal from the ANTENNA IN jack to your TV/monitor.

c Audio/Video connection

Connect one end of the video(yellow) cable to the VIDEO OUTPUT jack on the unit and other end to the VIDEO INPUT jack on your TV. Connect one end of the audio cables (red and white) to the analog AUDIO OUTPUT jacks on the unit and other ends to the AUDIO INPUT jacks on your TV.

d Power cord connection

Connect the mains lead to the AC IN terminal on the unit. Then plug the power cord into the mains.

Antenna

(Digital)

Antenna (Analog)

and/or

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 9

Hooking up the unit

General about connection

Picture and sound

Digital TV is a transmission technology that replaces the traditional analogue technique.

This means that several TV channels, radio channels and other digital services can be transmitted on the same space as just one channel took up before. As a consumer you get access to many more channels and services than before at the same time as they are received with perfect picture and audio quality.

The recorder converts the digital signal into a format that is suitable for your TV and sound system.

Connecting your recorder is just as simple as connecting for example a video recorder. You get the best picture quality by using a HDMI cable for connection to your TV-set. The best audio experience is obtained by connecting an optical cable to your sound system.

Coverage

Before buying this product it is anticipated that you have made sure that there are digital transmissions covering your region.

Antenna / Signal source

Depending on the reception your recorder may be connected to a simple indoor antenna or to an existing outdoor antenna system. If you live in a flat you should make sure that the digital terrestrial signals are distributed to your wall antenna outlet. If you have your own antenna system you must make sure that it is equipped with antennas, filter and/or amplifier that can handle those frequencies that the digital channels are transmitted on.

Cable-TV

Please observe that this recorder is not designed for the reception of regular digital cable-TV signals (QAM-signal). Despite this, operators of smaller cable networks may have chosen to distribute the digital terrestrial signals (COFDM signal) in the network. In this case this recorder may well be used.

Check with your landlord if you are insecure about what type of TV-signal that is provided in the wall antenna outlet.

Component connection

Connect one end of the component (Y PB PR) cables to the COMPONENT OUTPUT jacks on the unit and other ends to the COMPONENT INPUT jacks on your TV. Connect one end of the audio cables (red and white) to the analog AUDIO OUTPUT jacks on the unit and other ends to the AUDIO INPUT jacks on your TV.

If your television is a high-definition or “digital ready” television, you may take advantage of the unit’s progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled with the progressive signal. Set the resolution to 576p using RES. button on the front panel to obtain the progressive signal.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 10

S-Video connection

Connect one end of the S-Video cable to the S-VIDEO OUTPUT jack on the unit and the other end to the S-VIDEO INPUT jack on your TV. Connect one end of the audio cables (red and white) to the analog AUDIO OUTPUT jacks on the unit and the other ends to the AUDIO INPUT jacks on your TV.

Digital audio connection

Connecting to an amplifier/receiver, Dolby Digital/MPEG/DTS decoder or other equipment with a digital input.

Connect one end of the digital audio cables (COAXIAL or OPTICAL) to the digital audio output jack (COAXIAL or OPTICAL) on the unit and other end to the digital audio input jack (COAXIAL or OPTICAL) on your amplifier.

This recorder does not perform internal (2 channel) decoding of a DTS sound track . To enjoy DTS multi channel surround, you must connect this recorder to a DTS compatible receiver via one of this recorder’s digital audio output.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 11

HDMI connection

Connect one end of the HDMI cable to the HDMI OUTPUT jack on the unit and other end to the HDMI INPUT jack on your TV.

When you use the HDMI connection, you can change the resolution (576i, 576p, 720p,1080i or 1080p) for the HDMI output by pressing RES. button

repeatedly

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD Players, Set-Top Boxes, and other AV devices. HDMI was developed to provide the technologies of HDCP (High-bandwidth Digital Contents Protection). HDCP is used to protect digital content transmitted and received.

HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

Note on HDMI connection

 If your TV is NOT capable of handling 96 kHz sampling frequency, set

the [Sampling Freq.] option to [48 kHz] on the setup menu (See page

18). When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so your system can decode them.

 If your TV is not equipped with Dolby Digital and MPEG decoder, set the

[Dolby Digital] and [MPEG] options to [PCM] on the setup menu (See page 18).

 If your TV is not equipped with DTS decoder, set the [DTS] options to

[OFF] on the setup menu (See page 18). To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible receiver via one of this unit’s digital audio outputs.

 If there is noise or lines on the screen, please check the HDMI cable.

 Changing the resolution when the unit is connected with HDMI connector

may result in malfunctions. To solve the problem, turn off the unit and then turn it on again.

 When you connect a HDMI or DVI compatible device make sure of the

following:

- Try switching off the HDMI/DVI device and this unit. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this unit.

- The connected device’s video input is set correctly for this unit.

- The connected device is compatible with 720(1440)x576i, 720x576p, 1280x720p, 1920x1080i or 1920x1080p video input.

 Not all HDCP-compatible DVI devices will work with this unit.

- The picture will not be displayed properly with non-HDCP device.

What is SIMPLINK?

Some functions of this unit are controlled by TV’s remote control when this unit and LG TV with SIMPLINK are connected through HDMI connection.

• Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc.

• Refer to the TV owner’s manual for the details of SIMPLINK function.

• LG TV with SIMPLINK function has the logo as shown above.

Recorder

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 12

Connecting to the INPUT 1 or AV IN 2 Jacks

Connect the input jacks (INPUT1, AV IN 2) on the unit to the audio/video out jacks on your accessory component using audio/video cables.

Connecting a Digital Camcorder

Using the front panel DV IN jack, it is possible to connect a DV digital camcorder and digitally transfer DV tapes to DVD.

Use a DV cable (not supplied) to connect the DV in/out jack of your DV camcorder to the front panel DV IN jack of this unit.

The DV IN jack is for connection to DV digital camcorder only. It is not compatible with digital satellite tuners or D-VHS video decks. Disconnecting the DV cable while recording a contents of the connected digital camcorder may result in malfunction.

Using USB Flash Drive

Using an USB Flash Drive

This unit can play the MP3/WMA/JPEG/DivX files contained in the USB Flash Drive.

Inserting the USB Flash Drive – Insert straight-in until it fits into place.

Removing the USB Flash Drive – Withdraw the USB Flash Drive carefully

when the connected USB Flash Drive is in use.

Notes on USB Flash Drive

 The contents on the disc or HDD cannot be moved or copied to a USB

Flash Drive.

 Keep the USB Flash Drive out of reach of children. If swallowed, seek med-

ical advice immediately.

 This unit supports only USB Flash Drive with FAT16 or FAT32 format.

 The USB Flash Drives which require additional software will not be

supported.

 This unit is compatible with the Flash type USB device that supports USB

1.1.

 This unit may not supports some USB Flash Drive.

 Do not extract the USB Flash Drive in operating (play, copy, etc.).

It may cause a malfunction on this unit

Operating USB Flash Drive

1. Insert an USB Flash Drive to the USB port: –

2 Displays the HOME menu: HOME

3 Select a main option:

bb BB

[MUSIC], [PHOTO] or [MOVIE] option

4 Select the [USB] option:

vv VV

5 Displays corresponding menu list: ENTER

For details of operations on each file, refer to relevant pages.

ON REMOTE

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 13

Jack panel of Accessory Component

(VCR, Camcorder, etc.)

AUDIO

OUTPUT

VIDEO

OUTPUT

Rear of the recorder

Front of

the recorder

Auto setup

Adjust the programmed channels

Press HOME, then use

bb BB

to select [Easy Menu] option. Press ENTER while [SETUP] is selected. The SETUP menu appears on the screen. Select the [Program Edit] on the second level options then press BBto move to the third level. Press ENTER while [Edit] option is selected. The channel editing screen appears on the screen.

Select which channel you would like to edit and press ENTER. An option menu on the left side of the screen will be highlighted.

[Favorite] Set the program to favorite channel. [Delete]: Delete the selected channel from programmed channel list. [Move]

(Analog channel only): Change the order of the channels and which

numerical button they correspond to. [Block] Blocks the program. [Station Rename] (Analog channel only): change a name of the selected channel. [Program Edit]

(Analog channel only): Change the settings of a channel

manually.

Editing a channel (Analog channel only)

You can change the settings of programmed channel by selecting [Program Edit] option on the left side of the channel editing screen.

[PR]: Indicates the selected channel position. [Seek]: Searches for a channel automatically. Searching stops when the unit tunes in a channel. [Ch.] Changes the channel number. [MFT] Fine tunes the channel to obtain a clearer picture. [NICAM]: Sets the channels for the NICAM broadcast. [OK]: Confirm the settings and return to the channel list menu.

Auto setup

1 Turn on the unit: POWER

The initial setup wizard appears on the screen.

2 Choose a language:

vv VV

3 Select the chosen language: ENTER

4 Check the antenna and go to the next step: ENTER

5 Choose a clock setting mode:

vv VV

6 Select the chosen clock setting mode: ENTER

7 Set the clock:

vv VV bb BB

This step is not available for Auto mode ENTER

8 Choose a broadcasting type: All or Analog

BB vv VV

9 Select the [Start] and starts channel scan:

ENTER

10 Close the initial setup: ENTER

ON REMOTE

When the first time to turn on the unit, the initial setup wizard sets the language, clock and channels automatically.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 14

Switching the program list on the channel editing screen

You can switch the program list on the channel editing screen.

Press vVto move the highlight position to top of the program list. Press bBto select [DIGITAL TV], [ANALOG TV] or [RADIO] then press vV to select a program on the list.

Setting a favorite program

You can set a program to favorite channel.

Press vVto select a program on the program list then press ENTER to highlight the option menu on the left side of the screen. Press vVto select [Favorite] option then press ENTER. The program is set to the favorite program and [FAV] appears on the TV screen.

Using the Home Menu

MOVIE

HDD – Displays the [Title List] menu, which shows recorded titles on HDD. (page 33) HDD DivX – Displays [Movie List] menu, which shows DivX®movie files on HDD. (page 27) DISC

– Displays [Title List] menu, which shows recorded titles on the disc. (page

33)

– Displays [Movie List] menu, which shows DivX

movie files on the disc.

(page 27)

– Plays DVD-Video disc (page 25).

USB – Displays [Movie List] menu, which shows DivX

movie files on the USB

Flash Drive. (page 27)

Using the Home Menu

1 Displays the HOME menu: HOME

2 Select a main option:

bb BB

3 Select a sub option:

vv VV

4 Execute the selected option: ENTER

5 Exit the HOME menu: HOME

ON REMOTE

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 15

PHOTO

HDD – Displays [Photo List] menu, which shows photo files on HDD. (page 30) DISC – Displays [Photo List] menu, which shows photo files on the disc. (page

30) USB – Displays [Photo List] menu, which shows photo files on the USB Flash Drive. (page 30)

MUSIC

HDD – Displays [Music List] menu, which shows music files on HDD. (page 29) DISC – Displays [Music List] menu, which shows music files or audio tracks on the disc. (page 29) USB – Displays [Music List] menu, which shows music files on the USB Flash Drive. (page 29)

Easy Menu

SETUP – Displays SETUP menu. (page 16)

Rec Mode – Displays [Record Mode Set] option in the SETUP Menu. (page 20)

Dubbing – Dubs a currently playing title from a finalized DVD±R or a DVD-ROM title without copy protection. (page 37)

HDD – Returns to live TV viewing in HDD mode. Pressing the HDD button on the remote control will also allow you to directly choose this option. DVD – Returns to live TV viewing in DVD mode. Pressing the DVD button on the remote control will also allow you to directly choose this option. Timer Record – Displays [Timer Record] menu. (page 31)

Adjust the SETUP settings

1 Displays the HOME menu: HOME

2 Select the [Easy Menu] option:

bb BB

3 Select the [SETUP] option: ENTER

4 Select a desired option on the first level:

vv VV

5 Move to second level:

6 Select a desired option on the second level:

vv VV

7 Move to third level:

8 Adjust or confirm the setting:

vv VV

, ENTER

9 Go back to the previous level:

ON REMOTE

First level

Second level

Third level

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 16

Adjust the SETUP settings

Adjust the general settings

Auto Programming – This option automatically scans and sets the available

channels. Password is needed to access this option, if [Lock System] option is set to [On]. (page 19)

[All, Digital or Analog]: Select a broadcasting type which you want to scan automatically. [Start]: Start the channel scanning.

Program Edit– This option allows you to add channels and edit preset channels. Password is needed to access this option, if [Lock System] option is set to [On]. (page 19)

[Add Channel]: Select the broadcasting type between [Digital] and [Analog] and then press

vv VV

to select the channel and press ENTER to add the selected channel. [Edit]: Displays the screen which show preset channel list and channel editing options. (page 14)

Clock Set– The clock must be set in order to use [Timer record].

[Auto]: Set the channel that broadcasts a clock signal and the clock will be set automatically. If the clock that has automatically set is different with your local clock, you can add more time using [Time Offset] option. (For example, when summer time is started in local area.) Press B to select [Time Offset] option. Press vVto select a value then press ENTER (0, 30, 60, 90, 120). Select “0” if the clock that has automatically set is identified with your local clock. You can select the [Time Zone] option to set a time relative to GMT. [Manual]: If there is no channel that broadcasts a clock signal in your area, you can set the time and date manually.

TV Aspect – Selects the aspect ratio of the connected TV. If the resolution is set to 720p or 1080i, [TV Aspect] will be disable in the setup menu.

[4:3 Letter Box]: Select this when connecting to a standard 4:3 screen TV and prefer the wide picture with bands on the upper and lower portions of the screen. [4:3 Pan Scan]: Select this when connecting to a standard 4:3 screen TV and prefer the wide picture on the entire screen. Cuts off the portions at the sides that do not fit. [16:9 Wide]: Select this when connecting to a wide-screen TV.

Power Save mode – Selects whether this unit is in power save mode when the power is turned off. This option is not available when a timer recording is set.

[ON]: The front panel display is off and only signals arriving at the antenna input are passed through when the unit is turned off. [OFF]: Turns off the [Power Save Mode].

Antenna Feed 5V – If you are using an indoor antenna, use one with a signal amplifier rated at DC 5V, 100mA and set this option to [ON].

[ON]: Power is supplied to the connected antenna.

[OFF]: The unit does not supply power to the connected antenna.

Initialization – You can reset the unit to its original factory settings and format the HDD.

[Factory Set]: You can reset the unit to all its factory settings. Some options cannot be reset (DVD Rating, Parental Guidance, Password, and Area Code). The auto setup menu appears on the screen after the factory settings. [HDD format]: Everything recorded on the HDD will be erased.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 17

Adjust the language settings

Display Menu – Select a language for the Setup menu and on-screen display.

Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle.

[Original]: Refers to the original language in which the disc was recorded. [Others]: To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list on page 38. If you make a mistake while entering number, press CLEAR to delete numbers. [OFF] (for Disc Subtitle): Turn off Subtitle.

DTV Audio –

Digital channels sometimes provide multiple audio tracks, often in a different language. You can set a default audio language with this setting. If provided by the broadcaster, you can also select a different audio language while viewing TV by pressing AUDIO repeatedly.

DTV Closed Caption –

Digital channels sometimes provide Closed Caption, often in a different language. You can set a default Closed Caption language with this setting,

if DTV Closed Caption is provided by the broadcaster. Press SUBTITLE repeatedly to select a Closed Caption language while viewing digital TV viewing.

If Closed Captions are available, the DTV Closed Caption icon ( ) appears on the program information display to indicate that you can select one of those Closed Caption options with the SUBTITLE button.

DivX Subtitle – Select a language code for the DivX

subtitle.

Adjust the audio settings

Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when

using the DIGITAL AUDIO OUTPUT jack.

[Bitstream] – Select this when you connect this unit’s DIGITAL AUDIO OUTPUT jack to an audio component with a built-in Dolby Digital, DTS or MPEG decoder. [PCM] (for Dolby Digital / MPEG) – Select this when you connect this unit’s DIGITAL AUDIO OUTPUT jack to an audio component without a built-in Dolby Digital or MPEG decoder. [Off] (for DTS) – Select this when you connect this unit’s DIGITAL AUDIO OUTPUT jack to an audio component without a built-in DTS decoder.

Sample Freq. (Frequency) – Selects the sampling frequency of the audio signal.

[48 kHz]: In case of DVD with 96KHz sampling, the output is converted to 48KHz. If your receiver or amplifier is NOT capable of handling 96KHz signal, select [48KHz]. [96 kHz]: The audio signals are output in their original format.

DRC (Dynamic Range Control) – Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect.

Vocal – Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 18

Adjust the lock settings

To access the Lock System, DVD Rating, Parental Guidance, Set Password or Area Code options, you must enter the 4-digit password. If you have not yet entered a password you are prompted to do so. Enter a 4-digit password. Enter it again to verify. If you make a mistake while entering number, press CLEAR to delete numbers. If you forget your password, you can reset it. Displays the SETUP menu. Input ‘210499’ and press ENTER. The password has now been cleared.

Lock System – Allows you to set up specific programs and ratings through blocking schemes. Also allows you to activate or disable all of the lock schemes previously set up. A password is required to gain access to the lock menu options. When the Lock System is set to [OFF], the [Parental Guidance] is not effective.

DVD Rating – Select a DVD rating level. The lower the level, the stricter the rating. Select [No Limit] to deactivate the rating.

Parental Guidance – You can set the ratings to block out all the programs with ratings above a specified level. If you set a rating, all programs with the same rating or lower are viewed. Higher rated scenes are not viewed unless an alternate scene is available in the program. The alternative must have the same rating or a lower one. If no suitable alternative is found, you cannot view the program. You must change the rating level in order to view the program.

[OFF]: Cancel the blocking. [R] (Restricted 18+): Not for children under age 18. Strong elements of sex and/or violence. [AV] (Adult Audience strong violence 15+) [MA] (Mature Adult Audience 15+): Mature Adult only. Mature Audience Only. This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 15. [M] (Mature Audience 15+): Mature Audience only. This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 15.

[PG] (Parental Guidance Recommended): Content is such that parents may not want their children to view the program. [G] (General Audiences): Content is not offensive to most viewers. [C] (Children’s 7+): This program is designed for age 7 and above. [P] (Pre school 5+): This program is designed for age 5 and above. All Block: Blocks all programs.

Set Password – Changes or deletes the password.

[Change]: Enter the new password twice after entering the current password.

[Delete]: Delete the current password after entering the current password. Area code – Select a code for a geographic area as the playback rating level. This determines which area’s standards are used to rate DVDs controlled by the parental lock. See the Area Codes on page 38.

DivX Reg. Code– We provide you with the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www.divx.com/vod. Press ENTER when [View] icon is highlighted and you can view the registration code of the unit.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 19

Adjust the recording settings

Record Mode Set – Select the picture quality for recording from XP, SP, LP, EP

or MLP. See recording time of each mode on page 41.

[XP]: Highest picture quality. [SP]: Standard picture quality. [LP]: Slightly lower picture quality than [SP] mode. [EP]: Low picture quality. [MLP]: The longest recording time with the lowest picture quality.

Record Aspect – This option sets the recording aspect ratio to suit the material you are recording on DVD.

DV Record Audio – You need to set this if you have a camcorder using 32kHz/12-bit sound connected to the front panel DV IN jack.

Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting. On the Audio 1 setting, the sound that was recorded while shooting is used. On the Audio 2 setting, the overdubbed sound is used.

TV Record Audio – Select an audio channel to record when recording a bilingual program.

[Main+Sub]: Main language and sub language [Main]: Main language only [Sub]: Sub language only

Auto Chapter – When DVD recording, chapter markers are added automatically in every specified interval (5, 10 or 15 min.).

Time Shift – Setting this option to [ON] activates the Time Shift function automatically without pressing TIMESHIFT button. The timeshift will start in 5 seconds after TV tuner mode is started.

Adjust the disc settings

Disc Format – You can Initialize a DVD by pressing ENTER while [Start] is

selected. The [Disc Format] menu appears. The unit starts formatting after confirmation. You can select a mode between VR and Video for DVD-RW discs. Everything recorded on the DVD will be erased after formatting.

If you load a completely blank disc, the unit will initialize the disc automatically. See “Formatting mode (new disc)” on page 5 for more information.

Finalize – Finalizing is necessary before you can play a disc recorded with this unit on other DVD equipment. How long finalization takes depends on the disc condition, recorded length and number of titles.

[Finalize]: The [Finalize] menu appears. The unit starts finalizing after

confirmation.

[Unfinalize]: The finalized DVD-RW discs can be unfinalized after confirming

on the [Unfinalize] menu. After unfinalizing, the disc can be edited and re-

record.

Before finalizing, check the characteristics between the disc type in the table below.

The finalized DVD-RW discs can be unfinalized so that the disc can edit or record again.

Once you finalize a disc, you can not edit or record anything on the disc.

Discs are automatically finalized when removed from the unit.

Finalization is not needed.

RAM

+RW

-R+R

-RW

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 20

Disc Label – This function allows you to change the default disc name to something more descriptive. This name appears when you load a disc and when you display disc information on-screen. The keyboard menu appears by pressing ENTER while [Edit] is selected.

Disc Protect – This function allows you to protect discs from accidental recording, erasure and editing by setting this option to [ON]. The DVD-R and Video mode formatted DVD-RW are not available to protect.

Adjust the network settings

Software Update – Your recorder is able to keep the built-in digital tuner up to

date with the latest software. You can either check for updates manually, or have the unit do it automatically at regular interval. While the unit is in updating, there may have a disruption in reception for a few hours. The reception should return to normal after the update is complete. This unit must be plugged into AC power to receive updates. Do not unplug your recorder while an update is in progress. The update is not available during recording, Timeshift, viewing teletext or EPG menu.

[Standby mode] Updates the software when this unit is turned off. The check mark appears when this option is selected. [Operation Mode] Update the software when this unit is turned on. The check mark appears when this option is selected. [Time] Set the time to update the software. [Freq] Selects the updates interval.(Weekly or Daily) [Start] Updates the software immediately.

System Information – Shows system information. (software version, DTV Signal Quality and DTV Signal Strength)

Displaying disc Information

Adjusting playback menu item

You can select an item by pressing vV and change or select the setting by pressing bB.

a Current title/track/file / Total number of titles/tracks/files

b Current chapter / total number of chapters

c Elapsed playing time

d Selected audio language or audio channel

e Selected subtitle

f Selected angle / Total number of angles

g Selected sound mode

Displaying disc information

1 Play the disc loaded on the unit: PLAY

2 Displays current status of playback: DISPLAY

3 Displays the playback menu: DISPLAY

4 Select an item:

vv VV

5 Adjust the playback menu settings:

bb BB

6 Exit the disc playback menu: DISPLAY

ON REMOTE

a b c d e f g

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 21

Moving to another title

When a disc has more than one title, you can move to another title. Press DISPLAY twice during playback then use v / V to select the title icon. Then, press the appropriate numbered button (0-9) or b / B to select a title number.

Starting playback from selected time

Press DISPLAY twice during playback. The time search box shows the elapsed playing time. Select the time search box and then input the required start time in hours, minutes, and seconds from left to right. For example, to find a scene at 2 hours, 10 minutes, and 20 seconds, enter “21020” and press ENTER. If you enter the wrong numbers, press b

B to move the under bar (_) to the

wrong number. Then enter the correct numbers.

Selecting a subtitle language

During playback, press DISPLAY twice to display the playback menu. Use v V to select the subtitle option then use bB to select desired subtitle language.

During playback, press SUBTITLE then press bBrepeatedly to select a desired subtitle language.

Watching from a different angle

If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. During playback, press DISPLAY twice to display the playback menu. Use v V to select the angle option then use bB to select desired angle.

Selecting a sound mode

This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multi-channel audio from a home theater system. During playback, press DISPLAY twice to display the playback menu. Use v V to select the sound option then use bB to select desired sound mode

(3D SUR. or NORMAL).

Displaying information while watching TV

During viewing the TV, Press DISPLAY to display the information displayed on-screen.

a Indicates channel number, station name, and audio signal

(Stereo, Bilingual, Mono) received by the tuner. (The audio signal indication is available only for the analog channels.)

b Indicates media name and format.

c Indicates the record mode, free space, and elapsed time progress bar.

d Indicates current date and time.

e Indicates program title, start time, end time, parental guidance level etc.

(Digital Programs only)

(Extended Text Message Icon): Indicates that there is an Extended Text Message available to provide detailed descriptions of the program (see page 24).

(DTV Closed Caption Icon): Indicates that the current program con-

tains the Closed Caption.

(Wide Icon): Indicates that the current program is shown in wide

picture format.

(Teletext Icon): Indicates that there is a Teletext available (see page

25).

DivXDVD ALL

DVD

DivXDVD

DivXDVD ALLHDD

DVD ALLHDD

b c

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 22

Changing TV program

Use PR/CH on the remote control to change the programs in memory or use numbered (0-9) buttons to select a program directly.

Changing TV program with program list

You can display TV program list using the ENTER button and switch into other TV program on the channel list.

While watching a program, press ENTER to display the TV program list. Select your desired channel using the v / V and press ENTER to change the TV program.

Switching the program list

You can switch the program list to DIGITAL TV, ANALOG TV or RADIO. Press v to move the highlight position to top of the program list.

Press bBto select a [DIGITAL TV], [ANALOG TV], or [RADIO]. Selected program list appears.

Displaying the favorite program list

You can display favorite channel list that organized by your private taste. To set a favorite program, use [Program Edit] option in the Setup menu. (page

17.)

Press Red colored button while watching a TV. The favorite options appears. Press vVto select a desired program then press ENTER to watch the selected program.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 23

Using the digital EPG - more you can do

About the digital EPG

The digital EPG shows a table of scheduled digital TV programs and detailed information about individual program. The digital EPG screen consist of program information, channel list and general program list. Note that the unit’s clock must be set to the correct time and date to ensure all relevant EPG information is displayed.

Displaying the detailed Information window

You can view detailed information for the highlighted program. Press blue color button to display detailed information window. To exit the detail information window, press blue color button again.

Switching the EPG menu

The EPG screen provides two search menus. Press yellow color button when the EPG menu is displayed.

 Now/Next: The screen shows now and next programs.

 8 Days: The screen shows programs within 8 days. When the EPG menu

with 8 days is displayed, you can also change the date of the EPG menu by pressing the green color button then use b / B to select a date.

You can set a timer record using EPG menu with 8 days. Select a program then press red color button. The red timer icon will be displayed and the program will be memorized by the recorder. You can check the programming on the [Timer Record List] menu (see page.

31). To cancel the timer recording, select the program then press red color button. The red timer icon disappears.

Using the digital EPG

1 Displays the EPG menu: EPG

2 Select a TV program:

vv VV

3 Displays the next/previous menu list: . >

4 Shows the selected program currently on air: ENTER

5 Exit the EPG menu: EPG or RETURN

ON REMOTE

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 24

Viewing a Teletext service

Teletext is a free broadcasting service by some TV stations which gives up-to-the-minute information on news, weather, television programs, share prices and many other topics. The recorder gives you access to teletext which is greatly improved in various aspects such as text and graphics. This teletext can be accessed by special teletext services and specific services which broadcast teletext.

Use numbered (0-9) buttons or PR/CH on the remote control to change the program which broadcast teletext. Press TEXT to access on the teletext. Follow the indications on teletext and move onto the next or previous step by pressing color (RED or GREEN) or SKIP (. / >) buttons. Press (TEXT) or RETURN (O) to turn the teletext off and return to TV viewing.

Selecting teletext page

Enter the desired page number as a three digit number with the numbered buttons. If during selection you press a wrong number, you must complete the three digit number and then enter the correct page number again. Use RED/GREEN buttons to move up and down pages.

Play a disc - more you can do

Playing a disc that contains a menu

The menu screen may be displayed first after loading a DVD which contains a menu.

Use the b / B / v / V buttons to select the title/chapter you want to view, then press ENTER to start playback. Press TITLE or MENU/LIST to return to the menu screen.

Skip to the next/previous chapter/track/file

Press SKIP (>) to move to the next chapter/track/file. Press SKIP (.) to return to the beginning of the current chapter/track/file. Press SKIP (.) twice briefly to step back to the previous chapter/track/file.

DivXWMAMP3ACDDVD ALLHDD

DVD

Play a disc

1 Open the disc tray: OPEN/CLOSE (ZZ)

2 Insert a disc: -

3 Close the disc tray: OPEN/CLOSE (ZZ) 4 Adjust the disc menu settings: v V b B, ENTER

A disc menu may not appears on the screen depending on the disc.

5 Starts playback: PLAY (NN)

6 Stops playback: STOP (

)

ON REMOTE

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 25

Pause a playback

Press PAUSE/STEP (X) to pause playback. Press PLAY ( NN) to continue playback.

Frame-by-Frame playback

Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback. You can advance or back up the picture frame-by-frame by pressing b / B repeatedly during PAUSE mode.

Fast forward or fast reverse

Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the various playback speed by pressing SCAN (m or M) repeatedly. Press PLAY ( NN) to continue play at normal speed.

Hearing a different audio

Press AUDIO then press b or B repeatedly to hear a different audio language, audio track or encoding method.

Slow down the playing speed

While playback is paused, press SCAN(bb or BB) to slow down forward or reverse playback. You can change the various playback speed by pressing

SCAN (m or M) repeatedly. Press PLAY (

)to continue play at normal

speed.

Viewing the Title menu

Press TITLE to displays the title menu or disc menu. If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may appears.

Playing repeatedly

Press REPEAT repeatedly to select an item to be repeated. The current title, chapter, folder or track will be played back repeatedly. To return to normal playback, press REPEAT repeatedly to select [OFF].

Repeating a specific portion (A-B)

Press REPEAT to select [A-] at the beginning of the portion you wish to repeat and press ENTER at the end of the portion. Your selected portion will be repeated continually. You cannot select a portion less than 3 seconds. To return to normal playback, press REPEAT repeatedly to select [OFF].

Last Scene Memory

This unit memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled.

DVD

ACDDVD ALLHDD

WMAMP3ACDDVD ALLHDD

DVD

DVD ALLHDD

DivXDVD ALLHDD

DivXACDDVD ALLHDD

DVD ALLHDD

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 26

Playing a DivX®movie files

Movie List menu options

Select which file you would like to show from the menu and press ENTER. An options menu appears on the left side of the screen.

[Play]: Starts playback of the selected file. [Open]: Opens the folder and a list of files in the folder appears. [Delete]: Deletes the file(s) of folder (s) from the hard disk drive. [Rename]: Edits the file name in the HDD. [Move]: Moves selected file(s) to another folder in the HDD. [Copy]: Copies a file(s) to another folder in the HDD.

Displaying movie file information

Press DISPLAY to show file information on the highlighted file in the movie list.

Divx file requirement

Available resolution size: 720x576 (W x H) pixel DivX file extensions: “.avi”, “.divx” Playable DivX subtitle: “.smi”, “.srt”, “.sub (Micro DVD format only)”,

“.txt (Micro DVD format only)”

Playable Codec format: “DIV3”, “MP43”, “DIVX”, “DX50” Playable Audio format: “AC3”, “PCM”, “MP2”, “MP3”, “WMA”

Sampling frequency: within 8-48 kHz (MP3), within 32-48kHz (WMA) Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA)

CD-R Format: ISO 9660 and JOLIET. DVD±R/RW Format: ISO 9660 (UDF Bridge format) Maximum Files/Disc: Less than 1999 (total number of files and folders)

Notes on DivX format

 The DivX subtitle file name has to be identified with the DivX file name to be

display on the unit.

 If the subtitle file does not display properly, change the language code in the

[DivX Subtitle] option. (page 18)

 If the number of the screen frames is over 29.97 frames per second, this

unit may not operate normally.

 If the video and audio structure of DivX file is not interleaved, the audio and

video output may not be matched properly.

 If there is an impossible code to express in the DivX file name, it may be

displayed as a “_” mark.

 If the bitrate of a DivX file on the USB is over 4Mbps, the file may not be

played properly.

Playing DivX®movie files

1 Displays the HOME menu: HOME

2 Selects a [MOVIE] option:

bb BB

3 Selects an option that contains DivX file:

vv VV

, ENTER

4 Selects a movie file from the menu: v V

5 Plays the selected movie file: PLAY

6 Stops the playback: STOP

ON REMOTE

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 27

Selecting multiple files or folders on the list

You can select not only a single file but also multiple files using the MARKER button. Press MARKER at the desired files to select multiple files.

This function is not available for Audio CD.

Selecting all files and folders on the current list

you want to select all files and folders on the list, press CLEAR at any file or folder on the list. Press CLEAR again to deselect files and folders. This function is not available for Audio CD.

Naming a file or folder on the HDD

You can name a file or folder on the HDD. The length of a name can be up to 32 characters long.

Select a file or folder you would like to rename then press ENTER. Select [Edit] option then press ENTER to show sub options. The keyboard menu appears by pressing ENTER while [Rename] option is selected.

Copying file(s) or folder(s) to the HDD

You can copy file(s) or folder(s) to the HDD.

Select file(s) or folder(s) you would like to copy then press ENTER. Select [Edit] option then press ENTER to show sub options. The [Copy] menu appears by pressing ENTER while [Copy] option is selected. Select a directory that you would like to copy to. Select the [Copy] option then press ENTER to begin copying.

Moving file(s) or folder(s) to an other folder on the HDD

You can move file(s) or folder(s) to an other folder on the HDD.

Select file(s) or folder(s) you would like to move then press ENTER. Select [Edit] option then press ENTER to show sub options. The [Move] menu appears by pressing ENTER while [Move] option is selected. Select a directory that you would like to move to. Select the [Move] option then press ENTER to begin moving.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 28

Listening to music

Music List menu options

Select which file/track you would like to show from the menu and press ENTER. A menu appears on the left side of the screen.

[Play]: Starts playback of the selected file/track. [Random]: Starts or stops random playback. [Open]: Opens the folder and a list of files in the folder appears. [Delete]: Deletes the file(s) or folder(s) from the hard disk drive. [Rename]: Edits the file name in the HDD. [Move]: Moves selected file(s) to another folder in the HDD. [Copy]: Copies a file(s) to another folder in the HDD. [Program Add]: Adds a file(s)/track(s) to [Program List]. [Save]: Saves a [Program List] that you have arranged in the HDD. [Load]: Loads a saved [Program List] in the HDD.

Displaying MP3/WMA file information

Press DISPLAY while the file you want to show the file information for is selected. The unit shows the ID3-Tag information of the file. If the file does not have ID3-Tag information, [ID3-Tag: None] appears on the screen.

MP3/WMA audio file requirement

File extensions: “.mp3”, “.wma”.

Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)

Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA)

CD-R Format: ISO 9660 and JOLIET.

DVD±R/RW Format: ISO 9660 (UDF Bridge format)

Maximum Files/Disc: Less than 1999 (total number of files and folders)

Creating your own program

You can play the contents in the order you want by arranging the order of the music files. The program is cleared when exiting the [Music List] screen. To add or erase music on the program list, press MENU/LIST to display the [Program List]. Select a desired music file from the [Music List] then press ENTER. If you want to select multiple files/tracks, press MARKER at the every desired file/track. Select the [Program Add] option then press ENTER to add the selected file/track to the [Program List]. Select a music file from the [Program List] then press PLAY to start programmed playback. You can change the playing order using [Move] option on the program list menu.

Erasing tracks/files from Program List

To delete a music file from the program list, select the music file you want to delete then press ENTER. An option menu appear on the left side of the screen. Select the [Delete] option then press ENTER to erase the music file from the list.

Save your Program List (HDD only)

This unit memorizes the [Program List] that you have programmed. Select a file on the [Program List] then press ENTER. Select the [Save] option then press ENTER to save the [Program List].

Listening to music

1 Displays the HOME menu: HOME

2 Select a [MUSIC] option:

bb BB

3 Selects an option that contains music:

vv VV

, ENTER

4 Selects a music from the menu: v V

5 Plays the selected music: PLAY

6 Stops the playback: STOP

ON REMOTE

Audio CD MP3/WMA

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 29

Viewing a photo

Photo List menu options

Select which file you would like to show from the menu and press ENTER. A menu appears on the left side of the screen.

[Full Screen]: Shows the selected file in full screen. [Open]: Opens the folder and a list of files in the folder appears. [Delete]: Deletes the file(s) or folder(s) from the hard disk drive. [Rename]: Edits the file name in the HDD. [Move]: Moves selected file(s) to another folder in the HDD. [Copy]: Copies a file(s) to another folder in the HDD. [Slide Show]: Displays the [Slide Show] menu.

Skip to the next/previous photo

Press SKIP (. or >) to view the previous/next photo while displayed in full screen mode.

Rotate a photo

Use vV to rotate the photo while displayed in full screen mode.

Viewing photo files as a slide show

To view photos as a slide show, in the [Photo list] select the [Slide Show] option on the left side of the screen then press ENTER, The [Slide Show] menu appears on the screen. Set the [Object] and [Speed] options then press ENTER while [Start] option is selected. The unit starts slide show as you selected on the menu.

[Object] option:

 [Selected] Views slide show of only selected files.

Use the MARKER button to select multiple files.

 [All] Views slide show of all files.

[Speed] option:

Sets the Slide Show speed to [Slow], [Normal], or [Fast].

Listening to music during slide show

You can view photos as a slide show while listening to MP3/WMA music files on HDD. Press ENTER while [Simultaneous Music play] option is selected on the [Slide Show] menu. The music file selection menu appears on the screen. Press MARKER at the desired files to play then press ENTER while [Start] option is selected. The unit starts slide show with music playing.

[Select All]: Select all files in current directory. [Deselect All]: Deselect all files.

Pause a slide show

Press PAUSE/STEP to pause a slide show. Press PLAY to continue the slide show.

Photo file requirement

File extension: “.jpg”

Photo size: Less than 4MB recommended

CD-R Format: ISO 9660 and JOLIET.

DVD±R/RW Format: ISO 9660 (UDF Bridge format)

Maximum Files/Disc: Less than 1999 (total number of files and folders)

Notes on JPEG file

 Progressive and lossless compression JPEG image files are not supported.  Depending on the size and number of the JPEG files, it may take several

minutes to read the contents of the media.

Viewing a photo

1 Displays the HOME menu: HOME

2 Selects a [PHOTO] option:

bb BB

3 Selects an option that contains photo file:

vv VV

, ENTER

4 Selects a photo from the list: v V b B

5 Displays the selected photo in full screen: PLAY

6 Returns to the Photo List: STOP

ON REMOTE

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 30

Recording

Changing TV audio channel

Before recording, you can change the TV audio channel for stereo and bilingual broadcast. Press AUDIO repeatedly to change the audio channel. The current audio channel is displayed on-screen. Set the [TV Rec Audio] option in the SETUP menu when recoding a bilingual broadcast.

Instant timer recording

Instant timer recording allows you to make a recording of preset length easily.

When the REC is first pressed, recording starts. Press REC repeatedly to select a certain amount of time. Each press of REC displays the increased recording time on-screen. You can set the instant timer recording up to 240 minutes on HDD or up to 720 minutes on DVD, depending on the free space available.

Setting a timer record

This unit can be programmed to record up to 16 timer recordings within a month. The clock must be set correctly before setting a timer recording.

Press HOME and select TV option. Press

vv VV

to select the [Timer Record] and

press ENTER to display [Timer record List] menu. Use

vv VV

to select [New] and press ENTER to display [Timer Record] menu. Adjust each field as described below using

vv VV bb BB

[Media]: Choose a media to record (HDD or DVD). [CH/PR]: Choose a memorized program number, or one of the external inputs from which to record. (You cannot select DV input and radio channel.) [Date]: Choose a date up to

1 month

in advance. [Start Time]: Set the start time. [End Time]: Set the end time. [Repeat] Choose a desired repeat (Once, Daily (Mon-Fri), or Weekly). Recordings from EPG menu will always be set to [Once].

Press REC repeatedly to set the recording mode (XP, SP, LP, EP or MLP) then press ENTER to set a timer recording. The “Rec OK” or “OK” on the [Check] field on the [Timer Record List] menu indicates the timer recording is programmed correctly.

Recording

1 Selects a recording mode: HOME,

You can select a recording mode on the

vv VV bb BB

SETUP menu. (XP, SP, LP, EP or MLP) ENTER

2 Selects a recording media: HDD or DVD

3 Selects a channel or source you want to record: PR/CH, AV/INPUT

4 Starts recording: REC

5 Stops recording: STOP

ON REMOTE

Follow the instruction below to record a TV channel or other source. The recording continues until the media is full, you stop the recording or the progress of recording is more than 12 hours.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 31

Canceling a timer recording

You can cancel a timer recording before the timer recording actually starts. Select a timer recording that you want to cancel on the [Timer Record List] menu and press CLEAR.

Timer Recording Troubleshooting

Even though the timer is set, the unit will not record when:

– There is no disc loaded and there is not free space on the HDD. – A non-recordable disc is loaded and there is not free space on the HDD. –

[Disc Protect] option is set to [ON] in the Setup menu and there is not free

space on the HDD (see page 21). – The unit is in operating (recording, copying, deleting etc.). – There are already 99 titles (DVD-RW, DVD-R), 49 titles (DVD+R,

DVD+RW) recorded on the disc and there are already 255 titles recorded

on the HDD.

You cannot enter a timer program when:

– A recording is already underway. – The time you’re trying to set has already passed. – There are already 16 timer programs set.

If two or more timer programs overlap:

– The earlier program takes priority. – When the earlier program finishes, the later program starts. – If two programs are set to start at exactly the same time, the program

entered first takes priority.

Simultaneous playback and record

You can play other contents while you are recording. Simply press HOME and select the playable contents you want to play while recording. You cannot playback other contents while copying or dubbing. The DivX file cannot be played while recording. When you are recording on a DVD, other contents on the DVD cannot be played.

Time Slip

You can watch the title that you are currently recording to HDD with this function. After the recording is progressed over 15 seconds, press PLAY to playback the title that you are currently recording. If you stop playback the title, returns to the current recording position.

Record from a camcorder

You can record from a DV-equipped camcorder to the HDD by connecting it with a DV cable. You can also record from a digital camcorder connected to the DV in jack on the front of the unit. Press AV/INPUT repeatedly to select the DV input. Find the place on the camcorder recording that you want to begin recording from and press REC to start recording. Depending on your camcorder, you can use this recorder’s remote to control the camcorder using the STOP, PLAY and PAUSE functions. Press STOP to end recording.

Recording From an external input

You can record from an external component, such as a camcorder or VCR, connected to any of the recorder’s external inputs. Each press of the AV/INPUT changes the input source as described below. Make sure that the component you want to record from is connected properly to the unit before recording an external source.

 Tuner: Built-in tuner  AV1: INPUT 1 (VIDEO, AUDIO (L/R)) mounted on the rear panel  AV2: AV IN 2 (VIDEO, AUDIO (L/R)) mounted on the front panel  DV: DV IN mounted on front panel

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 32

Using time shift function

This feature allow you to pause or rewind live TV, so you do not miss a thing if you were interrupted. Press TIMESHIFT then press PAUSE/STEP while watching live broadcast. The timeshift function will record the broadcast for later viewing. Before using this function, make sure that the unit is in HDD mode.

If no button is pressed for 6 hours, the timeshift will stop automatically. You can use trick play functions (slow, scan, etc.) during timeshift. Refer to playback operation on page 20.

Stop timeshift by pressing STOP and confirm by pressing ENTER. You will be returned to watch a broadcast in real time.

Jump to start or end during timeshift

Press ENTER to show progress bar during timeshift. Press

to jump to the

beginning and

to jump to the end of the timeshift recording.

Clip recording

If you want to record a timeshifted program as a title, press REC at the starting point and ending point you want to record. The timeshift progress bar indicates a clip that you select with red bar. You can make more clips by repeating this instruction. The clips will be recorded when you exit the timeshift function.

Using time shift function automatically

If the [Time Shift] option in the SETUP menu is set to [ON], timeshift starts automatically without pressing TIMESHIFT button in HDD mode. If you want to quit timeshift function, set the [Time Shift] function to [OFF].

Editing a title

About title list menu

Press MENU/LIST to display the Title List menu. Playback should be stopped when you do this. You can also access it using HOME menu, select [MOVIE] option then select [HDD] or [DISC] option and press ENTER. If you are editing a VR mode disc, press MENU/LIST to switch between Original and Playlist menu.

a Current media b Indicates the record mode, free space, and elapsed time progress bar. c Menu options: To display menu option, select a title or chapter then press

ENTER. The options displayed differ depending on the disc type.

d Currently selected title. e Thumbnail f Shows the title name, recorded date, and recording length.

a b

e f

Editing a title

1 Selects a recording media: HDD or DVD

2 Displays a [Title List] menu: MENU/LIST

3 Selects a title you want to edit:

vv VV bb BB

4 Displays an editing menu: ENTER

The options are differ depending on the media type.

5 Selects a menu option:

vv VV bb BB

, ENTER

6 Exit the [Title List] menu: RETURN

ON REMOTE

Using the Title list menu,you can edit video contents.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 33

Before editing

This unit offers various edit options for various disc types. Before you edit, check the disc type, and select the option available for your disc.

You can enjoy advanced edit functions with VR mode formatted DVD (DVD-RW or DVD-RAM). Editing either the original recording(called the “Original”), or the playback information created from the original (called a “Playlist”). Edits made to the original titles are final. If you plan to edit a title without editing the original title, you can create a Playlist title for editing. A Playlist is a group of Playlist titles created from the original title for editing purposes.

Titles in the disc’s original content contain one or more chapters. When you insert a disc’s title into the Playlist, all the chapters within that title also appear. In other words, chapters in the Playlist behave exactly as chapters on a DVD Video disc do. Parts are sections of Original or Playlist titles. From the Original and Playlist menu you can add or delete parts. Adding a chapter or title to the Playlist creates a new title made up of a section (i.e. chapter) of an Original title. Deleting a part removes part of a title from the Original or Playlist menu.

Adding chapter markers

You can create chapters within a title by inserting chapter marks at the desired point. Press MARKER at the desired point while playback or recording. A chapter marker icon appears on the screen. Adding a chapter while recording is not available for HDD title.

The chapter markers can be added at regular intervals automatically by setting the [Auto Chapter] option in the SETUP menu.

Deleting a title or chapter

When you delete a title or chapter from the PlayList, the title or chapter in the Original still remains. However, if you delete a chapter or title from Original, the title or chapter deleted from the Original are also removed from PlayList.

Select a title or chapter that you want to delete and press ENTER. Select [Delete] option from the menu on the left of the screen and press ENTER to confirm.

HDD – You can delete multiple files using MARKER button. Press MARKER at the desired files to select multiple files and then follow the instructions above.

Chapter search

You can select the start of a title by searching a chapter. Select a title that you want to search and press ENTER. Select [Chapter] in the [Search] option from the menu on the left of the screen, and press ENTER to display the [Chapter List] menu.

Use

vv VV bb BB

to find the chapter you want to start playback, and press PLAY to

start playback.

Making a new PlayList

The PlayList allows you to edit or re-edit a title or chapter without changing the Original recordings. Use this function to add an Original title or chapter to a new PlayList or the registered Playlist.

Select an Original title or chapter that you want to put into the PlayList then press ENTER. Select the [Playlist Add] option and then press ENTER to display the [Select PlayList] menu. Choose a PlayList-title that you want to put the selected Original title or chapter in, or select the [New PlayList] to create a new PlayList.

Moving a PlayList chapter

Use this function to re-arrange the playing order of a PlayList title on the [Chapter List-Playlist] menu. Select [Move] option from the menu on the left of the [Chapter List-Playlist] screen and press ENTER. Use

vv VV bb BB

to choose the place you want to move the chapter to then press ENTER. The updated menu is displayed

RAM-RW

RAM-R+R+RW-RW

Video

-RW

HDD

RAM+R+RW-RW

HDD

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 34

Time search

You can select the start of a title by searching through the time duration. Select a title that you want to search and press ENTER. Select [Time] in the [Search] option from the menu on the left of the screen and press ENTER to display the [Search] menu.

Use

bb BB

to find the time you want to start. Each press of

bb BB

to moves 1

minute and press and hold

bb BB

to moves 5 minutes. Press ENTER to watch a

title from a selected time.

Sorting the titles

Press ENTER to bring up the options menu. Select [Sort] option and press ENTER to view the further options. Here you can choose to sort titles according to [Date] (when they were recorded), [Title] (alphabetical order) or by [Category] (sort by genre).

Combining titles

Use this function to merge the selected title with another title. Select a title and press ENTER. Select [Combine] in the [Edit] option then press ENTER. Select a title you want to combine with current title and press ENTER to confirm.

Hiding a chapter or title

You can skip through playing chapters or titles without actually deleting them. Select a chapter or title you want to hide and press ENTER. Select [Hide] in the [Edit] option then press ENTER.

If you want to recover the hidden title or chapter, select the hidden title or chapter and press ENTER. Select [Show] in the [Edit] option then press ENTER to recover it.

Dividing a title

Use this function to split a title up into two titles. Select a title that you want to divide and press ENTER. Select [Divide] in the [Edit] option from the menu on the left of the screen and press ENTER to display the [Divide] menu. Find the point you want to divide a title using PLAY, SCAN, PAUSE/STEP buttons and press ENTER while [Divide] option is selected. The playback screen shows the divided point. Select [Done] option and press ENTER to divide. You cannot select dividing point less than 3 seconds.

Protect a title

Use this function to protect a title against accidental recording, editing or deleting. Select a title you want to protect and press ENTER. Select [Protect] option from the menu on the left and press ENTER. The lock mark will appears on the title thumbnail.

If you want to unprotect the title, select the protected title and press ENTER. Select [Unprotect] option from the menu on the left and press ENTER to unprotect it.

Deleting a part

You can delete a part which you do not want in the title.

Select a title that you want to delete part of and press ENTER. Select [Delete Part] in the [Edit] option from the menu on the left of the screen and press ENTER to display the [Delete part] menu. You can find the point using PLAY, SCAN, PAUSE/STEP buttons.

[Start Point]: Select starting point of a part that you want to delete then press ENTER. [End Point]: Select ending point of a part that you want to delete then press ENTER. [Next Part]: Press ENTER to delete an additional part (HDD only). [Cancel]: Press ENTER to cancel the selected part. [Done]: Press ENTER to delete the selected part.

RAM-RW

HDD

RAM+R+RW-RW

+RWHDD

+R+RW

HDD

RAM-R+R+RW-RW

Video

-RW

HDD

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 35

Naming a title

When a title is recorded by this unit, the title name will be named by a number. You can change a title name by using this function.

Select a title that you want to change the name of and press ENTER. Select [Rename] or [Title Name] option from the menu on the left of the screen and press ENTER to display the keyboard menu. Use

vv VV bb BB

to select a character

then press ENTER to confirm your selection on the keyboard menu.

[OK]: Finish the naming. [Cancel]: Cancels all entered characters. [Space]: Inserts a space at the cursor position. [Delete]: Deletes the previous character at the cursor position.

You can use remote control buttons for entering a name

PLAY (N): Inserts a space at the cursor position.

X (PAUSE/STEP): Deletes the character after the cursor position. x (STOP), CLEAR: Deletes the character before the cursor position. . / >: Moves cursor to left or right.

MENU/LIST, DISPLAY: Changes the character set on the keyboard menu. Numbers (0-9): Enters the corresponding character at the cursor position.

You can apply a genre for a selected title on HDD. When a character is highlighted on the keyboard menu, keep pressing

until the curser jumps across to the Genre field. Choose desired genre and press ENTER to select it. The chosen genre name will appear at the lower right corner of the title thumbnail.

Combining chapters

Use this function to merge the selected chapter with adjacent chapter. Select a chapter and press ENTER. Select [Combine] option to view combine indicator between chapter thumbnails. Press ENTER to combine indicated two chapters.

This function is not available in conditions as listed below.

 There is only one chapter within the title.  The first chapter is selected.

 The chapters that you want to combine are created by deleting a part from

an Original title.

 The chapters that you want to combine are created from different titles.  One of the playlist chapters that you want to combine has been moved.

Using the Disc menu

Using the title list menu in DVD mode, you can use the disc setting functions without entering the SETUP menu.

Use

vv VV bb BB

to select the [Disc] option on the DVD title list menu and then

press ENTER to show further options.

[Disc Format]: Format the inserted disc. (page 20) [Finalize]: Finalize the inserted disc. (page 20) [Unfinalize]: Unfinalize the inserted disc. (page 20) [Disc Label]: Use this to enter a name for the disc. This name appears when you load the disc and disc information on-screen. (page 21) [Protect]: Use this to prevent accidental recording, editing, deleting of the inserted disc. (page 21) [Unprotect]: Release the protect function.

Overwriting

You can overwrite a new video recording on a recorded title that is not protected. Select the TV channel or input source you want to record. Press MENU/LIST to display the Title List menu. Use vVbBto highlights a title you want to overwrite and then press REC to start overwrite. To stop the recording, press STOP.

If you overwrite a longer recording than the current title on the fully recorded disc, the next title is overwritten. If the next title is protected, the overwriting stops at the starting point of the title.

+RW

RAM+R+RW-RW

HDD

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 36

Dubbing a title

Before dubbing

Use the copying features of this recorder to:

 Back up important recordings stored on the HDD to a DVD.  Make a DVD copy of a recording on the HDD to play in another player.  Transfer video from a DVD to the HDD for editing.  Transfer edited video from the HDD to DVD.

About ‘Fast’ copying

Copying between DVD and HDD is a completely digital process and therefore involves no loss of quality in the audio or video. This allows high speed copying for ease and convenience. When copying from HDD to DVD, the speed of copying depends on the recording mode and the kind of DVD disc you’re using. The Fast copying is available for unedited original video titles, and may not be possible when using disc initialized on another recorder. When you dub a title from the DVD to HDD, only a VR mode formatted disc can use [Fast] mode.

When you dubs a title from the HDD to VR mode DVD-RW or DVD-RAM, the [Fast] mode is not available for edited HDD title and Clip Recording title. And dub an edited title from VR mode formatted DVD-RW or DVD-RAM to HDD also cannot use [Fast] mode.

Dub multiple titles from HDD to DVD

You can select not only a single title but also multiple titles using MARKER button. Press MARKER at the desired titles to select multiple titles, and press ENTER to display the menu on the left of the screen. Select [Dubbing] option from the menu on the left of the screen and press ENTER to display the [Dubbing] menu. Use

vv VV bb BB

to select [Start] icon then press ENTER to

confirm.

Dub a currently playing title

This feature copies a single title to the HDD in real time. When you start copying, playback jumps back to the start of the title, then continues through to the end of the title, when recording automatically stops. The copy will be made in the recording mode (XP, SP, LP, EP or MLP) that is currently set in the SETUP menu.

During DVD playback, press HOME to display the HOME menu. Select the [Dubbing] in the [Easy Menu] option, and press ENTER to start dubbing. The [Dubbing] option in the HOME menu will be activated only for a title from a finalized DVD±R or DVD-ROM title without copy protection.

-R+R

HDD

Dubbing a title

1 Selects a recording media: HDD or DVD

2 Displays a [Title List] menu: MENU/LIST

3 Selects a title you want to dub:

vv VV bb BB

4 Displays an editing menu: ENTER

5 Selects the [Dubbing] option:

vv VV

6 Displays the [Dubbing] menu: ENTER

7 Sets the [Rec mode] option:

vv VV bb BB

XP, SP, LP, EP, MLP, AUTO or Fast modes

8 Highlights the [Start] icon:

vv VV

9 Starts dubbing: ENTER

ON REMOTE

Using the title list menu, you can dub video contents.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 37

Language Codes

Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.

Area Codes

Choose an area code from this list.

Language Code

Afar 6565 Afrikaans 6570 Albanian 8381 Ameharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Aymara 6588 Azerbaijani 6590 Bashkir 6665 Basque 6985 Bengali; Bangla 6678 Bhutani 6890 Bihari 6672 Breton 6682 Bulgarian 6671 Burmese 7789 Byelorussian 6669 Chinese 9072

Language Code

Croatian 7282 Czech 6783 Danish 6865 Dutch 7876 English 6978 Esperanto 6979 Estonian 6984 Faroese 7079 Fiji 7074 Finnish 7073 French 7082 Frisian 7089 Galician 7176 Georgian 7565 German 6869 Greek 6976 Greenlandic 7576 Guarani 7178 Gujarati 7185

Language Code

Hausa 7265 Hebrew 7387 Hindi 7273 Hungarian 7285 Icelandic 7383 Indonesian 7378 Interlingua 7365 Irish 7165 Italian 7384 Javanese 7487 Kannada 7578 Kashmiri 7583 Kazakh 7575 Kirghiz 7589 Korean 7579 Kurdish 7585 Laothian 7679 Latin 7665 Latvian, Lettish 7686

Language Code

Lingala 7678 Lithuanian 7684 Macedonian 7775 Malagasy 7771 Malay 7783 Malayalam 7776 Maori 7773 Marathi 7782 Moldavian 7779 Mongolian 7778 Nauru 7865 Nepali 7869 Norwegian 7879 Oriya 7982 Panjabi 8065 Pashto, Pushto 8083 Persian 7065 Polish 8076 Portuguese 8084

Language Code

Quechua 8185 Rhaeto-Romance 8277 Rumanian 8279 Russian 8285 Samoan 8377 Sanskrit 8365 Scots Gaelic 7168 Serbian 8382 Serbo-Croatian 8372 Shona 8378 Sindhi 8368 Singhalese 8373 Slovak 8375 Slovenian 8376 Spanish 6983 Sudanese 8385 Swahili 8387 Swedish 8386 Tagalog 8476

Language Code

Tajik 8471 Tamil 8465 Telugu 8469 Thai 8472 Tonga 8479 Turkish 8482 Turkmen 8475 Twi 8487 Ukrainian 8575 Urdu 8582 Uzbek 8590 Vietnamese 8673 Volapük 8679 Welsh 6789 Wolof 8779 Xhosa 8872 Yiddish 7473 Yoruba 8979 Zulu 9085

Area Code

Afghanistan AF Argentina AR Australia AU Austria AT Belgium BE Bhutan BT Bolivia BO Brazil BR Cambodia KH Canada CA Chile CL China CN Colombia CO Congo CG

Area Code

Costa Rica CR Croatia HR Czech Republic CZ Denmark DK Ecuador EC Egypt EG El Salvador SV Ethiopia ET Fiji FJ Finland FI France FR Germany DE Great Britain GB Greece GR

Area Code

Greenland GL Hong Kong HK Hungary HU India IN Indonesia ID Israel IL Italy IT Jamaica JM Japan JP Kenya KE Kuwait KW Libya LY Luxembourg LU Malaysia MY

Area Code

Maldives MV Mexico MX Monaco MC Mongolia MN Morocco MA Nepal NP Netherlands NL Netherlands Antilles AN New Zealand NZ Nigeria NG Norway NO Oman OM Pakistan PK Panama PA

Area Code

Paraguay PY Philippines PH Poland PL Portugal PT Romania RO Russian Federation RU Saudi Arabia SA Senegal SN Singapore SG Slovak Republic SK Slovenia SI South Africa ZA South Korea KR Spain ES

Area Code

Sri Lanka LK Sweden SE Switzerland CH Taiwan TW Thailand TH Turkey TR Uganda UG Ukraine UA United States US Uruguay UY Uzbekistan UZ Vietnam VN Zimbabwe ZW

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 38

Troubleshooting

General

The power does not turn on.

b Plug the power cord into the wall outlet securely.

There is no picture.

b Select the appropriate video input mode on the TV so the picture from the

unit appears on the TV screen.

b Connect the video connection securely.

Picture noise appears.

b You are playing a disc recorded in a colour system that is different from

your TV.

b The video signal from the external component is copy-protected.

b Set the resolution that your TV can accept.

The channel is not found or stored.

b Check your antenna connection.

There is no sound.

b Connect the audio connection securely. b The input source setting on the amplifier or the connection to the amplifier

is incorrect.

b The unit is in scan, slow motion, or pause mode.

The remote control does not work properly.

b The remote control is not pointed at the remote sensor of the unit. b The remote control is too far from the unit. b There is an obstacle in the path of the remote control and the unit. b The batteries in the remote control are exhausted.

Playback

The unit does not start playback.

b Insert a playable disc. (Check the disc type, colour system, and regional

code.)

b Place the disc with the playback side down. b Place the disc on the disc tray correctly inside the guide. b Clean the disc. b Cancel the Rating function or change the rating level.

Cannot play a disc recorded using this unit on other player.

b Finalize the disc. b Check the disc compatibility of the player. b Place the disc on the disc tray correctly inside the guide. b Discs recorded with copy-once material cannot be played on other

players.

The angle cannot be changed.

b Multi-angles are not recorded on the DVD Video being played. b The angle cannot be changed for the titles recorded on this unit.

The subtitle language cannot be changed or turned off.

b Subtitles are not recorded on the DVD Video being played. b The subtitle cannot be changed for the titles recorded on this unit.

Cannot play MP3/WMA/JPEG/DivX files.

b The files are not recorded in a format that the unit can play. b The unit does not support the codec of the DivX movie file.

b The resolution is higher than the unit can support.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 39

Recording

Cannot record or does not record successfully.

b Check the remaining space on the disc. b Check that the source you are trying to record from is not copy protected. b The power may have failed during recording. b Use a VR mode formatted disc for copy-once material.

Timer record does not record successfully.

b Clock is not set to correct time. b The start time of the timer recording is past. b Two timer recordings may have overlapped, in which case only the earlier

one will record completely.

b When setting the recording channel, make sure you set the unit’s built-in

tuner, not the TV’s built-in tuner.

Stereo Audio Record and/or Playback is not present.

b TV is not Stereo-compatible. b Broadcast program is not in stereo format. b The A/V Output jacks on the unit are not connected to TV A/V In jacks.

HDMI

The connected HDMI device does not display any picture.

b Try disconnecting then reconnecting the HDMI cable. b Try switching the power of the HDMI device off then back on. b The video input of the connected device is set correctly for this unit. b The HDMI cable you are using is fully HDMI-compliant . Using a non-stan-

dard cable may result in no picture being output.

b Not all HDCP-compatible DVI devices will work with this unit.

The connected HDMI device does not output sounds.

b Some HDMI-compatible devices do not output sounds (check the manual

that came with the connected device).

b If your TV is not capable of handling 96 kHz sampling frequency, set the

[Sampling Freq.] option to [48 kHz] on the setup menu. When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so your system can decode them.

b If your TV is not equipped with Dolby Digital and MPEG decoder, set the

[Dolby Digital] and [MPEG] options to [PCM] on the setup menu.

b If your TV is not equipped with DTS decoder, set the [DTS] options to

[OFF] on the setup menu. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible receiver via one of this unit’s digital audio outputs.

Setting up the remote to control your TV

You can operate your TV with the supplied remote control. If your TV is listed in the table below, set the appropriate manufacturer code.

While holding down TV POWER button, and press the manufacturer code for your TV with the numerical buttons (see the table below). Release the TV POWER button to complete setting.

Manufacturer Code Number

LG / GoldStar 1 (Default), 2

Zenith 1, 3, 4

Samsung 6, 7

Sony 8, 9

Hitachi 4

Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.

Resetting the unit

If you observe any of the following symptoms.



The unit is plugged in, but the power will not turn on or off.



The front panel display is not working.



The unit is not operating normally.

You can reset the unit as follows.



Press and hold the POWER button for at least five seconds. This will force the unit to power off then turn the unit back on.



Unplug the power cord, wait at least five seconds, and then plug it in again.

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 40

Specifications

General

Power requirements AC 200-240V, 50/60 Hz Power consumption 30W Dimensions (approx.) 430 X 49 X 275 mm (w x h x d) without feet Net weight (approx.) 4 kg Operating temperature 5˚C to 35˚C Operating humidity 5 % to 65 % Television system Analog: PAL B/G color system

Digital: DVB-T Standard Compliant

Recording format PAL

Recording

Recording format DVD Video Recording, DVD-VIDEO Recordable media HDD (RH397D:160GB, RH399D:320GB),

DVD-RW, DVD-R, DVD+RW, DVD+R, DVD+R(Double Layer), DVD-RAM

Recordable time DVD (4.7GB): Approx. 1 hour (XP mode),

2 hours (SP mode), 4 hours (LP mode), 6 hours (EP mode), 14 hours (MLP mode) DVD+R DL (8.5GB): Approx. 3 hours (XP mode), 3.8 hours (SP mode),

7.3 hours (LP mode), 9.1 hours (EP mode), 21 hours (MLP mode) HDD (160/320GB, MPEG2 Recording): Approx. 43/85 hours (XP mode), 84/165 hours (SP mode), 164/323 hours (LP mode), 233/456 hours (EP mode), 477/935 hours (MLP mode)

Video recording format

Sampling frequency 27MHz Compression format MPEG2

Audio recording format

Sampling frequency 48kHz Compression format Dolby Digital

Playback

Frequency response DVD (PCM 48 kHz): 8 Hz to 22 kHz,

CD: 8 Hz to 20 kHz

DVD (PCM 96 kHz): 8 Hz to 44 kHz Signal-to-noise ratio More than 90 dB (AUDIO OUT connector) Harmonic distortion Less than 0.02% (AUDIO OUT connector) Dynamic range More than 95 dB (AUDIO OUT connector)

Inputs

ANTENNA IN Antenna input, 75 ohms VIDEO IN 1.0 Vp-p 75 ohms, sync negative, RCA jack x 2 AUDIO IN 2.0 Vrms more than 47 kohms, RCA jack

(L, R) x 2 DV IN 4 pin (IEEE 1394 standard) USB IN 4 pin (USB 1.1 standard)

Outputs

VIDEO OUT 1.0 Vp-p 75 ohms, sync negative, RCA jack x 1 S-VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, sync negative,

Mini DIN 4-pin x 1(C) 0.3 V (p-p) 75 Ω COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, sync negative,

RCA jack x 1, (PB)/(PR) 0.7 V (p-p), 75 Ω,

RCA jack x 2 HDMI video/audio output 19 pin (HDMI standard, Type A) Audio output (digital audio) 0.5 V (p-p), 75 Ω, RCA jack x 1 Audio output (optical audio) 3 V (p-p), Optical connector x 1 Audio output (analog audio) 2 Vrms (1 kHz, 0 dB), 600 Ω,

RCA jack (L, R) x 2

Accessories

RF cable (1), Remote control (1), Battery (1), Audio cable (1), Video cable (1)

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 41

RH397D-W_BAUSLL_ENG 6/16/08 1:31 PM Page 42

LG RH397D, RH399D User Guide

Specifications and Main Features

Frequently Asked Questions

User Manual