LGELV LV000598 LGEMC MA000001 GENCO ML000610
ARTESA MQ000101 DRAGON MU000600 LGEMS MX000001
LGEML MY000001 FOUANI NIGERIA NG000721 AFROVISION NG NG000748
LGELS NL000001 LGEBN NL000010 RANKIN NZ000502
LGEPS PA000001 LGEPR PE000001 N.ALLIED PK000624
ADVANCE CORPORATION PK000836 LGEPL PL000001 LGEPT PT000183
LGERO RO000758 MOSCOW RU000001 PETERSBURG RU000002
LGERU RU000010 LGERI RU000549 NAGHI SA000101
HASSAN SA000615 LGESW SE000001 LGESL SG001062
LGEMT TH000001 LGETH TH000002 UFOTEK TR000712
UFOTEK TR000787 LGETT TW001986 AAT TW003106
LGEUR UA000523 LGEUA UA001085 LGESA ZA000001
EFFECTIVE DATE
2007-08-30
EFFECTIVE FROM(SERIAL NO.)
ALL
Subject
[One Point Guide]Reboot after "HDD Check"
No. Loc No.
Before Change After Change
Note K-Code Remark
Part No Desc./Spec. Part No Desc./Spec.
Reason Of Change
Symptom Details (How to Duplicate Problem)
-. From unit displayed Please Wait then LG Recorder then HDD check , after a few
moments suddenly it reboot again
How to troubleshoot (Countermeasure)
-. Update to the newest program.
If HDD almost full, sometimes the unit will got difficulities to start. Then it displayed
please wait all times. This could be handled by upgrading to the newest program .
To upgrade, make sure replace the almost full HDD with the empty one. Then the booting
process will be OK. Upgrade the newest program, after succes, turn it off and use the almost
full HDD before.
Replce the HDD w/ empty one, then upgrade the program. After finished, use the old HDD
HDD almost full - no booting on RH7000.jpg
** FILE THIS SERVICE BULLETIN WITH YOUR SERVICE MANUAL
NOTE(**) : INTERCHANGEABILITY CODE KEY-WORD CODE
Parts Set
1. To improve performance
2. To improve productivity
3. To improve reliability
4. Change of material or dimension
5. Addition
6. Deletion
7. Correction
A
Original
New
Early
Late
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
B
Original
New
Early
Late
Original parts may be used in early production sets only.
New parts may be used in early or late production sets.
Use original parts where possible, then stock new parts.
C
Original
New
Early
Late
New parts only may be used in early or late production sets.
Stock new parts.
D
Original
New
Early
Late
Original parts only may be used in early production sets.
New parts may be used in late production sets only.
Stock original and new parts.
CHIEF ENGINEER ,
Factory.
http://biz.lgservice.com/gcsc/svb/main?tc=SvbPrintCmd&DOC_ID=KRSVB000050394 (3 di 3)05/12/2008 10.31.42