LG PTEGM0 INSTALLATION INSTRUCTIONS

ENGLISH

1

Elevation Grille

Kit composition

Elevation kit Wireless remote

controller / Battery

Elevation kit power wire
PCB connecting wire
Panel connecting wire #1
Panel connecting wire #2

Elevation Grille connecting wire #1
Elevation Grille connecting wire #2
Kit case #1
Kit case #2

Screw(4EA)

Installation

manual

Elevation kit installation manual

Name of each part of elevation kit

ITALIANO

ESPAÑOL

FRANÇAIS

DEUTSCH

∂§§∏¡πÃÕ

кЫТТНЛИ

PORTUGUÊS

NEDERLANDS

POLSKI

MAGYAR

ARABIC

2

Installation precaution

Kit Case #1

Indoor unit

Control box

Kit Case #2
(Included power wire /
PCB connecting wire)

1. When assembling the main unit of the elevation kit, be careful to assemble in the proper direction.

- Assemble by aligning the directions of the 2 cases of the kit as shown in the picture.
The elevation grill can malfunction when assembled incorrectly.

2. For the wiring of the elevation kit, refer to the installation manual and connect accurately.

- If not, the product may not operate or be damaged.

3. Assemble the parts so that there is no loose wire hook on the elevation kit and no entangled
part.

- If not, it can damage the internal operation part during the operation of the elevation
and drop the suction grill.

4. With the elevation grill normally connected, the elevation grill will automatically rise and be
closed
when the power is connected initially.

5. Check whether the elevation grill is completely assembled to the product.

- If not, check whether there are any interfering parts or whether the filter is installed properly.

6. Use the remote controller exclusively for the elevation grill and repeat the up/down process 2-3
times to check whether it is operating normally.

For safety purposes, operate the elevation grill only when the
product is stopped. If you operate the elevation grill even when the
product is not stopped, you will hear the warning sound “Beep”5
times and the elevation grill will stop operating.

Caution