LG NSPDP5009, NSPDP4209 User Manual

User Guide | Guía del Usuario

42" and 50" Plasma TV

Spanish

NS-PDP42/50-09

Insignia

NS-PDP42/50-09

42" and 50" Plasma

Safety information

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Safety information . . . . . . . . . . . . . . . . . . . . . . . . .3

Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Remote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installing remote control batteries . . . . . . . . . . . . . . 7

Using the remote control . . . . . . . . . . . . . . . . . . . . . 7

Setting up your TV . . . . . . . . . . . . . . . . . . . . . . . . .8

Installing the stand (42" TV only) . . . . . . . . . . . . . . . 8

Managing the cables . . . . . . . . . . . . . . . . . . . . . . . . 8

Mounting the TV on a wall . . . . . . . . . . . . . . . . . . . . 8

Securing the TV to a wall to prevent falling . . . . . . . 9

Connecting an antenna, cable TV, or satellite TV. . . 9

Connecting external equipment . . . . . . . . . . . . . . . 10

Using your TV . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Turning the TV on and off. . . . . . . . . . . . . . . . . . . . 15

Changing channels. . . . . . . . . . . . . . . . . . . . . . . . . 15

Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . 15

Using the Q.Menu (Quick Menu) . . . . . . . . . . . . . . 15

Using the on-screen menus . . . . . . . . . . . . . . . . . . 17

Memorizing and setting up channels . . . . . . . . . . . 17

Selecting the input source for your TV . . . . . . . . . . 19

Setting the AV mode. . . . . . . . . . . . . . . . . . . . . . . . 19

Using Simplink to control other AV devices . . . . . . 20

Adjusting picture settings . . . . . . . . . . . . . . . . . . . . 21

Controlling the sound and language. . . . . . . . . . . . 24

Setting the clock. . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Setting locks and parental controls. . . . . . . . . . . . . 29

Maintaining your TV . . . . . . . . . . . . . . . . . . . . . . .35

Cleaning the screen . . . . . . . . . . . . . . . . . . . . . . . . 35

Cleaning the cabinet. . . . . . . . . . . . . . . . . . . . . . . . 35

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .35

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Video problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Audio problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

PC mode problems. . . . . . . . . . . . . . . . . . . . . . . . . 36

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

One-year limited warranty . . . . . . . . . . . . . . . . . .37

Español . . . . . . . . . . . . . . . . . . . . . . . . 41

Introduction

Congratulations on your purchase of a high-quality Insignia product. Your NS-42/50PDP-09 represents the state of the art in television design, and is designed for reliable and trouble-free performance.

Warning

To reduce the risk of electric shock, do not remove the cover or back. There are no user-serviceable parts inside. Refer servicing to qualified service personnel.

To reduce the risk of fire or electric shock, do not expose your TV to rain or moisture.

Caution

To prevent electric shock, match the wide blade on the power cord plug to the wide slot on an electric outlet. If the plug does not fit, consult a licensed electrician to replace the obsolete outlet. Do not modify the power cord plug, or you will defeat this safety feature.

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV.

Warnings

• Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

• The TV should be connected to an AC power outlet with a protective grounding connection.

• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

• Always place the TV on the floor or a sturdy, level, stable surface that will support the weight of the unit.

• Installing the TV requires special skill that should only be performed by qualified service personnel.

• Customers should not attempt to do the work themselves. Insignia bears no responsibility for improper mounting or mounting that results in accident or injury.

Caution

The AC power plug is used as the disconnect device, so the AC power plug shall always remain readily operable.

Read instructions

Read all of the safety and operating instructions before you use your TV.

Retain instructions

Retain safety and operating instructions for future reference.

Follow warnings and instructions

Follow all warnings on your TV and in the operating instructions. Follow all operating and use instructions.

Water and moisture

Do not use your TV near water. For example, do not use it near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

www.insignia-products.com

Insignia NS-PDP42/50-09 42" and 50" Plasma TV

Cleaning

Unplug your TV before cleaning. Do not use liquid or aerosol cleaners. Use only a damp cloth to clean the exterior of your TV.

Ventilation

Slots and openings in the cabinet and the back or bottom are provided for ventilation, reliable operation, and protection from overheating. These openings must not be blocked or covered. Do not block the openings by placing your TV on a bed, sofa, rug, or other similar surface. Do not place your TV near or over a radiator or heat register. Do not place your TV in a built-in installation, such as a bookcase or rack, unless you provide correct ventilation or follow the manufacturer’s instructions.

Heat

Make sure that your TV is located away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Grounding or polarization

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a grounding prong. The wide blade or grounding prong are provided for your safety. If the plug does not fit, contact an electrician to replace the obsolete outlet.

Power cord protection

Route power cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from your TV.

Attachments

Use only attachments recommended by Insignia.

Stand

Do not place your TV on an unstable cart, stand, tripod, bracket, or table. Your TV may fall, causing serious personal injury and serious damage to your TV. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with your TV. If you mount your TV to the wall, follow the manufacturer’s instructions and use a mounting accessory recommended by the manufacturer. Your TV and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause your TV and cart combination to overturn.

Lightning

For added protection for your TV’s receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the power outlet and disconnect the antenna or cable system. This helps prevent damage to your TV from lightning and power line surges.

Servicing

Do not attempt to service your TV yourself because opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Replacement parts

When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, personal injury, or other hazards.

Overloading

Do not overload power outlets and extension cords because this can result in a risk of fire or electric shock.

Object and liquid entry

Never push objects of any kind into your TV through openings because objects may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on your TV.

Damage requiring service

Unplug this TV from the power outlet and refer servicing to qualified service personnel under the following conditions:

• When the power supply cord or plug is

damaged or frayed.

• If liquid has been spilled or objects have

fallen into your TV.

• If your TV has been exposed to rain or water.

• If your TV does not operate normally by

following the operating instructions. Adjust only those controls that are covered by the operating instructions because incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore your TV to its normal operation.

• If your TV has been dropped or damaged in

any way.

• When your TV exhibits a distinct change in

performance.

Safety check

After completing any service or repair to this TV, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition.

Power source

Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your TV dealer or local power company.

Screen protection

Your TV’s screen is made of glass. Do not drop your TV or hit the glass screen. If the screen breaks, be careful of broken glass.

www.insignia-products.com

Insignia NS-PDP42/50-09 42" and 50" Plasma TV

Outdoor antenna grounding

If an outside antenna or cable system is connected to your TV, make sure that the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to correct grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of the antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

1 Electric service equipment

Features

Accessories

Make sure that the following accessories are provided in the package:

•Power cord

• 75 ohm round cable

• Remote control and batteries (2 × AAA)

•User manual

• CD manual

• Protection cover

• Bolts for stand assembly

• Cable holders

• Cable management clip

Front

2 Power service grounding electrode system

3 Ground clamps

4 Grounding conductors

5 Antenna discharge unit

6 Grounding clamp

7 Antenna lead-in wire

Note to CATV system installer

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for correct grounding and in particular, specifies that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical.

End of life directives

Your new TV contains materials which can be recycled and reused. At the end of your TV’s life, specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of. Dispose of your old TV according to local regulations.

# Item Description

1 POWER button Press to turn your TV on or off.

2 INPUT button Press to select the AV signal input. You can

3 MENU button Press to open the on-screen menu.

4 ENTER Press to confirm your selections.

5 VOL - Press to decrease the volume.

6 VOL + Press to increase the volume.

9 Power/Standby

indicator

10 IR sensor Receives signals from the remote control.

select TV, AV1, AV2, S-Video, Component, DVD, HDMI, or PC.

Press to change to a lower channel.

Press to change to a higher channel.

Lights when your TV is plugged into a power outlet. When your TV is on, the indicator is blue. When your TV is in standby mode, the indicator is red.

Do not block.

www.insignia-products.com

Insignia NS-PDP42/50-09 42" and 50" Plasma TV

Back

USB

SERVUCE ONLY

HDMI IN 3

AUDI O

L/MONO

VIDEO

AV IN 2

# Description Function

10 COMPONENT IN - 1 and

2 (Y, Pb, Pr, AUDIO L, and AUDIO R)

11 HDMI/DVI IN - 1 and 2 Connect an HDMI cable to this

Connect component video cables to the Y, Pb, and Pr jacks and audio L/R cables to the AUDIO IN jacks.

connector. Supports HD video and digital audio. Does not support 480i. Accepts DVI video using an adapter or HDMI-to-DVI cable (not included).

Remote

POWER

RATIO

SOUND

Q. MENU MENU

SLEEP

PICTURE

INPUT

ENTER

AV MODERETURN

# Description Function

1 USB (service only) Used for software updates.

2 HDMI IN 3 Connect an HDMI cable to this

3 AV IN 2 (composite

video and L/R audio)

4 Digital audio (optical)

output

5 RS-232 IN (control and

service only)

6 REMOTE CONTROL IN Connect a wired remote control

7 RGB (PC) IN Connect a VGA (D-sub) cable

8 ANTENNA/CABLE IN

(coaxial antenna)

9 AV IN 1 (S-Video,

composite video, and L/R audio)

connector. Supports HD video and digital audio. Does not support 480i. Accepts DVI video using an adapter or HDMI-to-DVI cable (not included).

Connect analog composite video (480i) and audio input to these jacks.

Connect to an amplifier or home theater system to this jack. (Does not work in standby mode.)

Used by third-party devices.

to this jack.

from your PC to this connector (analog PC). Connect a 1/8" headphone plug to the AUDIO IN jack for analog PC audio.

Connect a 75 ohm cable from an antenna, cable TV wall jack, or cable box to this jack.

Connect a video cable (analog composite video - 480i) or

an S-Video cable (better quality 480i) to the appropriate jack.

Connect L/R audio cables to the AUDIO IN jacks for either connection.

FAV

VOL

MUTE

P A

123

456

7809

FLASHBK

# Button Description

POWER

2 RATIO Press to change the aspect ratio of the

3 SOUND Press to change the preset sound mode.

4 Q.MENU Press to open the Q.MENU (Quick menu).

5 MENU Press to open the on-screen TV menus.

7 ENTER Press to confirm your selections.

Press to turn your TV on or off.

picture.

Press again to return to normal viewing.

Press to navigate the on-screen menus.

www.insignia-products.com

Insignia NS-PDP42/50-09 42" and 50" Plasma TV

# Button Description

RETURN

9 Simplink Press to open the Simplink menu, showing

10 VOL +/- Press to adjust the volume.

11 MUTE Press to mute the sound. Press again to

12 Number

buttons

13 - Press to view digital sub-channels. First

(Stop)

(Play)

(Fast

Reverse)

17 SLEEP Press to set the amount of time before

18 PICTURE Press to change the preset picture mode.

19 INPUT Press to cycle through the available source

20 AV MODE Press to cycle through the available preset

21 FAV Press to display your favorite channels list.

CH /

23 FLASHBK Press to return to the previous channel.

24 Press to record a DVD, VCR, or CD with

(Pause)

(Fast

Forward)

Press to return to the previous menu.

a list of AV devices connected to your TV.

restore the sound.

Press to enter channel numbers.

enter the main channel number, then press this button, then enter the sub-channel number.

Press to stop DVD, VCR, or CD playback with Simplink.

Press to play a DVD, VCR, or CD with Simplink.

Press to fast reverse a DVD, VCR, or CD with Simplink.

your TV turns off.

inputs.

AV modes.

Press to change the channel.

Simplink.

Press to pause a DVD, VCR, or CD with Simplink.

Press to fast forward a DVD, VCR, or CD with Simplink.

Installing remote control batteries

Notes

• Do not mix batteries of different types.

• Do not mix old and new batteries.

• Remove batteries when the charge is depleted.

• Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.

• If the remote control is not going to be used for an extended period of time, remove the batteries.

Using the remote control

To use the remote control:

• Point the remote control directly at your TV, within a 60° angle horizontally (30° to either side) and within 30° vertically of the remote control sensor on the front of your TV, and within 26.25 feet (8 m) of your TV.

POWER

RATIO

SOUND

Q. MENU MENU

ENTER

FAV

VOL

MUTE

123

456

7809

SLEEP

PICTURE INPUT

AV MODERETURN

P A

FLASHBK

To install the remote control batteries: 1 Remove the battery cover.

2 Insert two 1.5 V AAA batteries into the

battery compartment. Make sure that you match the + and – symbols on the batteries with the + and – symbols in the battery compartment.

3 Replace the cover.

www.insignia-products.com

Caution

Do not expose the remote control to liquids, direct sunlight, or shock. Do not mix batteries of different types.

Notes

• Objects between the remote control and the remote control sensor may block the remote control signal.

• The range of the remote control may be diminished if direct sunlight or other strong light is shining on the remote control sensor. In this case, change the angle of the lighting, move your TV, or operate the remote control closer to the remote control sensor.

+ 14 hidden pages