LG NSNC096E7K0 Owner’s Manual

ROOM AIR CONDITIONER
Please read this manual carefully before operating your set and retain it for future reference.
TYPE : WALL MOUNTED
For Split AC Export Models
P/No. MFL39754873
MFL39754873 www.lg.com
1
2
3
6
Preparing for operation
6
Usage
6 6
Cleaning & Maintenance
6
Service
6
Symbols used in this manual
7
Components
8
Using the remote control
9
- Inserting battery
9
- Installing the remote control holder
10
BASIC FUNCTIONS
10
10
10
11
11
11
11
11
12
airflow
13
13
13
13
13
14
Dimmer
14
14
15
15
16
Cleaning the air filter
17
Cleaning the anti-allergy filter
17
Cleaning the plasma (+HAF) filter
17
(Optional)
Cleaning the Microprotection Filter (Optional)
18
Outdoor Unit
18
19
19
19
12
12
12
Avoid excessive cooling
reduce the cooling/ dehumidification functions
result
shall
hazards.
instructions
and
confirming
unit
ON or OFF
water
may effect product performance or
enter
OFF
may effect product performance.
to
not cause
,
in health complications or
solvents for air conditioner cleaning it may effect
product performance or result in product failure.
Always insert the filter securely after cleaning. Clean the filter in every two weeks or more often if necessary.
or
Prior to Operation
6
Preparing for Operation
1.Contact an installation specialist for
installation.
2.Plug in the power plug properly.
3.Use a dedicated circuit breaker.
4.Do not use an extension cord.
5.Do not start/stop operation by plugging/ unplugging the power cord.
6.If the cord/plug is damaged, replace it with only an authorized replacement part.
Usage
1.Being exposed to direct airflow for a long
time may be hazardous to your health. Do not expose occupants, pets, or plants to direct airflow for a long time.
2.Due to the possibility of oxygen deficiency, ventilate the room when using the appliance together with stoves or other heating devices.
3.Do not use this air conditioner for non­ specified special purpose (e.g. preserving precision devices, food, pets, plants, or art objects). Such use may damage your properties.
Components
Cleaning and Maintenance
1.Do not touch the metal parts of the unit
when removing the filter injury may occur.
2.Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation, leading to electric shock.
3.When cleaning the unit, first make sure that the power and circuit breaker are turned OFF. The fan rotates at a very high speed during operation. There is a possibility of injury if the unit’s power is triggered while cleaning inner parts of the unit.
Service
For repair and maintenance, contact your authorized service dealer.
Symbols used in this Manual
This symbol alerts you to the risk of electric shock.
This symbol alerts you to hazards that may cause harm to the air conditioner.
!
NOTE
This symbol indicates special notes.
7
Air Inlet
Signal Receiver
Air Filter
Front Panel
Product look and picture are for reference only, actual product may vary depending on model of the air conditioner.
Air Intake Vents
Air Outlet Vents
Base Plate
Connecting Wires
Piping
Drain Hose
Electrical Safety
WARNING
This appliance must be properly grounded. To minimize the risk of electric shock, you must always plug into a grounded outlet.
Do not cut or remove the grounding.
Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal and not insulated, and the wall receptacle is grounded through the house wiring.
If you have any doubt whether the air conditioner is properly grounded, have the wall receptacle and circuit checked by a qualified electrician.
Using the remote control
You can operate the air conditioner more conveniently with the remote control.
Wireless remote control
Signal Transmitter
FAN
M
2
M’SOON
Display Screen
Control Panel
Air Circulation button
late the room air without cooling or heating.
Mosquito Away operation button
start or stop Mosquito Away operation
sleep mode auto operation.
justs the desired temperature when cool­ing and heating.
-
ON/OFF button :
8
Used to circu-
Used to
Sets the
Ad-
Turns the air conditioner ON/OFF
H’COOL
LIGHT
Signal Transmitter
H’COOL
LIGHT
fan speed.
-
M’SOON
H’COOL
M
Use to remove excess moisture.
H’COOL button : Cools down the indoor temperature within a short period of time
M
2
M’SOON
Display Screen
Control Panel
AM
A/CLEAN
air flow direction.
ON
OFF
the start / end time
Turn indoor unit
LIGHT
display ON or OFF.
and set current time.
controller settings.
Symbol is for indoor unit display ON/OFF not remote controller.
remote
9
BASIC FUNCTIONS
10
Cooling your room
(Cooling operation)
Press to turn on the
1
2
Press repeatedly to select the cooling
operation.
is displayed on the display screen.
-
Press or to set the desired
3
temperature.
- The temperature range is 18°C ­ 30°C
power.
Heating your room
(Heating operation)
1 Press to turn on the power.
2
Press repeatedly to select the heating
operation.
is displayed on the display screen.
-
Removing humidity (Cooling Mode Only)
(Monsoon operation)
This mode removes excess moisture from environment with high humidity or in the rainy season, in order to prevent mold from setting in. This mode adjusts the room temperature and the fan speed automatically to maintain the optimal level of humidity.
1
Press to turn on the power.
2
Press to select the
M’SOON
M
- is displayed on the display screen.
NOTE
!
• In this mode you cannot adjust the room temperature, as it is adjusted automati­cally. Also, the room temperature is not displayed on the display screen.
• In this mode indoor unit fan and outdoor
unit will be OFF intermittently.
• To Exit from Monsoon mode press
key or key or key
H’COOL
monsoon operation.
M
3
Press or to set the desired tempera­ture.
- The temperature range is 16°C ­ 30°C
NOTE
!
Cooling-only models do not support this function.
11
Airing your room
(Air Circulation operation)
This mode only circulates the indoor air
without changing the room temperature.
Press to turn on the power.
1
2
Fan button : Press
is displayed on the display screen.
-
3
Press to adjust the fan speed.
FAN
turn on the air
circulation operation.
Adjusting the fan speed
1 Press repeatedly to adjust the fan
speed.
- Select if you want natural air. The fan speed adjusts automatically.
Natural wind (CHAOS Logic)
For fresher feeling, pr ess the INDOOR FAN SPEED SELECTION BUTTON and set to Natural wind mode( ). In this mode, the wind bl ows lik e a natural breeze by automaticall y ch ang ing fan speed.
Adjusting the air flow direc­tion
To adjust the direction of the flow verti-
1
cally, press change the air flow direc­tion automatically.
- This function is apply for only turn air deflector turn ON/OFF.
2
To adjust the direction of the flow horizon-
tally, press change the air flow direc-
tion automatically.
- This function is apply for only turn air deflector turn ON/OFF.
NOTE
!
• Adjusting the air flow direction horizon­tally may not be supported, depending on the model.
• Adjusting the air deflector arbitrarily may effect product performance.
• If you restart the air conditioner, it starts to operate with the previously set direc­tion of air flow, so the air deflector may not match the icon displayed on the re­mote control. When this occurs, press
or
the air flow again.
to adjust the direction of
Setting the Timer
You can use the timer function to save energy and to use the air conditioner more efficiently.
Setting the current time
1 Press and hold it for longer than 3 sec-
onds.
- The AM/PM icon flickers at the bottom of the display screen.
12
2 Press or to select .
3
Press to finish.
desired time.
Turning on the air conditioner auto­matically at a set time
1 Press
- The icon below flickers at the bottom of the display screen.
2
Press
3
Press to finish.
4
When setting the timer, current time and
ON icon are displayed on the display screen indicating that the ON TIMER is set.
or to select
desired time.
times.
Turning off the air conditioner auto­matically at a set time
1 Press
- The icon below flickers at the bottom of the display screen.
Canceling the timer setting
1 Press or to select the timer setting
to cancel.
2
Press
- To cancel all timer settings, press
(The timer lamp on the air conditioner and the remote symbol will go off ).
Setting sleep mode
Use the sleep mode to turn off the air condi­tioner automatically when you go to sleep.
1
Press to turn on the power.
2
Press
3
Press
(up to 7 hours).
4
Press to finish.
- is displayed on the display screen in sleep mode.
or to select the hour
2
Press
3
Press to finish.
4
When setting the timer, current time and
OFF icon are displayed on the display screen indicating that the OFF TIMER is set.
or to select
the times.
desired time.
This mode does not have auto restart feature.
The sleep mode will o per ate ind oor fan at super low speed in co oli ng m ode and at low speed in heating mod e fo r pl eas ant sleep
In cooling mode or Monso on m ode :
The setting temperatur e wi ll r ise automatically two times by 1°C over nex t co nse cutive 30 minutes (Maximum 2°C) f or a com fortable sleep. This will be the final se tti ng t emperature as long as sleep mode is fun cti oni ng. After completion of set tim e un it will switch OFF automatically.
13
ADVANCED FUNCTIONS
The air conditioner offers some additional ad­vanced functions.
Changing room temperature quickly
H’COOL Mode
This mode allows you to cool indoor air quickly
H’COOL
Press
-In H’COOL mode,30 minutes strong focused air blows out for faster cooling.
1
During & after H'COOL mode swing function will be ON by default.
To OFF swing function Press respective swing key.
- If you turn off the power, the fan oper­ates for 30 minutes and cleans the inside of the indoor unit.
NOTE
!
Some buttons cannot be used while the auto cleaning function is in operation.
During A uto Clean function, “C o” w ill be disp lay ed o n the unit.
Power s avi ng l amp blink dependin g on the m ode l.
Energy saving cooling mode
This mode minimizes power consumption dur­ing cooling and increases the set temperature to the optimal level for a more comfortable en­vironment.
The temperature automatically sets at 22°C if ambient temperature is below
The temperature maintains if ambient temper­ature is above 22°C
Press to turn the power on.
2
Press repeatedly to select the cooling operation.
3
Press
- is displayed on the display screen.
22°C.
This mode does not have auto restart feature.
Indoor air purification
Auto Clean operation
In the cooling and monsoon operations, moisture is generated inside the indoor unit. Use the auto cleaning function to remove such moisture.
1
Press to turn on the power.
Press
2
- is displayed on the display screen.
NOTE
!
This function may not be supported, depending on the model. In Energy Saving Cooling Mode, temperature on the display of the remote controller and air condi­tioner can be different.
This mo de d oes not have auto resta rt featur e.
14
Auto operation (Optional)
(Artificial inelligence)
Cooling-only models
In thi s mode , the fan s peed a nd the temperat ure adjust automat icall y, based on the roo m temperature.
1
Press to turn on the power.
2
Press repeatedly to select auto operation.
3
Press
ation code if the temperature is higher or
lower than the desired temperature.
!
• In this mode, you cannot adjust the fan speed, but you can set the air deflector to rotate automatically.
• This function may not be supported, de­pending on the model.
or to select the desired oper-
AI
Code Description
2 Cool 1 Cool slightly 0 Maintain
-1 Heat slightly
-2 Heat
NOTE
room temperature
Dimmer (Optional)
In Dimmer Mode Unit Display will be turned OFF completely but system will be in running state.
Auto Changeover
(Optional)
Heat pump models
This op eration is b asi cally he ating or coo ling fun ction of t he a ir c onditio ner. But d uri ng this o per ation th e con tro ller cha nge the oper ati on mode a utomati cal ly to k eep the t emperat ure w ith in ± 2°C w ith resp ect to the set ting tem peratur e.
1
Press to turn on the power.
2
Press repeatedly to select auto operation.
AI
- is displayed on the display screen.
AI
Press or to set the desired
3
temperature.
- The temperature range is 18°C -
4 Press repeatedly to select the fan speed.
NOTE
!
• This function may not be supported, de­pending on the model.
Mosquito Away* Operation (Optional)
Mosquito Away is a device to radiate frequency which mosquitoes don’t like.
1 Press
- To start Mosquito Away function.
30°C
1.
Make sure that remote & Air conditioner are ON.
2.
Press to activate/deactivate dimmer
function.
Dimmer Mode will be cancelled if any key except is pressed (Power Keywill turn OFF the Unit).
LIGHT
This function may not be supported by Auto Restart feature (depending on selected models).
2 Press again to finish
NOTE
!
• You can use this function by pressing without turning the air conditioner ON. (In this case, Fan speed can not be changed).
At this time horizontal vane will be at default position &
the fan speed will be low.
• This function can be used with other function like timer, monsoon.
• This function may not be supported depending on the model.
• The Mosquito Away performance can be different depending on the customer’s environment.
* For detail refer Disclaimer.
Loading...
+ 33 hidden pages