LG ND8630 Owner's Manual

OWNER’S MANUAL

ENGLISH

Music in Style

Wireless Speaker With
Dual Dock

Please read this manual carefully before operating
your set and retain it for future reference.

FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO
INNER PAGE OF BACK COVER.

ND8630

Getting Started2

Safety Information

1

Getting Started

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

enclosure that may be of sucient magnitude to
constitute a risk of electric shock to persons.

instructions in the literature accompanying the
product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.

WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.

NOTICE: For safety marking information including
product identication and supply ratings, please
refer to the main label on the bottom of the
apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon
a dedicated circuit;

That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s

The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)

appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.

This device is equipped with a portable battery or
accumulator.

Safety way to remove the battery or the
battery from the equipment: Remove the

old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.

CAUTION:

yThe apparatus shall not be exposed to water

(dripping or splashing) and no objects lled with
liquids, such as vases, shall be placed on the
apparatus.

yNo naked ame sources, such as lighted candles,

should be placed on the apparatus.

yOnly use the AC adaptor supplied with this

device. Do not use a power supply from another
device or another manufacturer. Using any other
power cable or power supply may cause damage
to the device and void your warranty.

yTo avoid re or electric shock, do not open the

unit. contact to qualied personnel only.

yDo not leave the unit in a place near the heating

appliances or subject to direct sunlight, moisture,
or mechanical shock.

yDo not leave the unit on an unstable place such

as high shelves. It may fall down because of the
vibration of the sound.

Disposal of your old appliance

1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by
the European Directive 2002/96/EC.

2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.

3. The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.

4. For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.

Disposal of waste batteries/accumulators

1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product
it means they are covered by
European Directive 2006/66/EC.

2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury,0.002% of cadmium or

0.004% of lead.

3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or
the local authorities.

4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.

5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.

Getting Started 3

LG Electronics hereby declares that this/these
product(s) is/are in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC, 2004/108/EC, 2006/95/EC,
2009/125/EC and 2011/65/EU.

Please contact to the followingaddress for obtaining
a copy of the DoC (Declaration of Conformity).

Contact oce for compliance of this product:
LG Electronics Inc.

EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands

yPlease note that this is NOT a Customer Service

contact point. For Customer Service Information,
see Warranty Card or contact the dealer that you

purchased this product.
In door use only.
RF Radiation Exposure Statement
This equipment should be installed and operated

with minimum distance 20 cm between the
radiator and your body.

POWER: This unit operates on a mains supply

of 100-240V~, 50/60Hz.
Wiring: This unit is supplied with a BS 1363

approved main plug. When replacing the fuse,
always use of the same rating approved to BS

1362. Never use this plug with the fuse cover
omitted. To obtain a replacement fuse cover
contact your dealer. If the type of plug supplied
is not suitable for the mains sockets in your
home, then the plug should be removed and
a suitable type tted. Please refer to the wiring
instructions below:

Warning: A mains plug removed from the mains
lead of this unit must be destroyed. A mains
plug with bared wires is hazardous if inserted in
a mains socket. Do not connect either wire to
the earth pin, marked with the letter E or with
the earth symbol 6 or coloured green or green
and yellow. If any other plug is tted, use same
rating of fuse in the plug.

Important: The wires in this mains lead are
coloured in accordance with the following codes:

- BLUE: NEUTRAL, BROWN: LIVE - As the
colours of the wires in the mains lead of this unit
may not correspond with the coloured marking
identifying the terminals in your plug, proceed
as follows: The wire which is coloured blue must
be connected to the terminal which is marked
with the letter N or coloured black. The wire
which is coloured brown must be connected to
the terminal which is marked with the letter L or
coloured red.

1

Getting Started

Getting Started4

Main Features

Made for iPod/iPhone/iPad or

1

Getting Started

Android device

Enjoys music from iPod/iPhone/iPad or Android
device with simple connection.

Portable In

Listens to music from your portable device.

LG Sound Sync

Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.

AirPlay®

Listens to music stored on your Apple device.

LG Bluetooth Remote

You can control this unit with your iPod touch/
iPhone/iPad or Android device via Bluetooth. This
unit and your device must be paired for Bluetooth.
Visit “Apple App Store” or “Google Android Market
(Google Play Store)” or use the QR code shown
below to search for “LG Bluetooth Remote” app. For
detailed information, refer to page 17-18.

Accessories

Please check and identify the supplied accessories.

Remote control (1) Battery (1)

AC adapter (1) Power cord (1)

Tweezers (1)

Introduction

Symbol Used in This Manual

(Apple iOS)

(Android OS)

Note

,

Indicates special notes and operating features.

Caution

>

Indicates cautions for preventing possible damages
from abuse.

Table of Contents

Table of Contents 5

1 Getting Started

2 Safety Information
4 Main Features
4 Accessories
4 Introduction
6 Remote Control
7 Front Panel
9 Back Panel
10 Connecting the AC Adapter
10 About Ferrite Core (Optional)

2 Operating

11 Basic Operations
11 – iPod/iPhone/iPad Operation
12 – Compatible iPod/iPhone/iPad
13 – Android device Operation
14 – Listening to Music from Your External

Device
15 Using a Bluetooth Wireless Technology
15 – Listening to Music of a Bluetooth

Device
17 – Using Bluetooth App
19 Using AirPlay
20 – Connecting your Wi-Fi device to Wi-Fi

network
23 – Streaming audio from your iTunes

music library to this unit
25 Other Operations
25 – LG Tag On
25 – LG Sound Sync
26 – Setting BASS (BASS BLAST) sound

effect
26 – Turning Off the Sound Temporarily
26 – Adjusting the brightness of the

lighting
26 – Auto Power Down

3 Troubleshooting

27 Troubleshooting

4 Appendix

28 About LED condition
29 Trademarks and Licenses
29 Handling the Unit
30 Specifications

5 Warranty

31 Warranty

1

2

3

4

5

Getting Started6

Remote Control

1

Getting Started

(Power): Switches the unit ON or OFF.

1

FUNCTION : Selects the function and input

P

source. (LG Sound Sync function is only selected by
using the SOUND SYNC button on the rear of the
unit.)

+/- (Volume) : Adjusts volume of speaker.

BASS EQ : Reinforce BASS (BASS BLAST) sound

effect.

Y/U

-Skips fast Backward or Forward.

-Searches for a section within a le.

@
?

(Skip/Search) :

(Play/Pause) : Starts or pause playback

: Mutes the sound.

: The button is not available for any function.

Caution

>

The battery used in this device may present a
re or chemical burn hazard if mistreated. Do
not recharge, disassemble, incinerate, or heat
above 100 °C (212 °F). Replace the battery part
no. CR2025 only. Use of another battery may
present a risk of re or explosion. Dispose of
used battery. Keep battery away from children.
Do not disassemble or dispose of in re.

Battery Installation

You have two ways to open the battery cover.

1. Turn the battery cover counterclockwise by
using a coin or your finger. Then take the battery
cover.

Coin

2. Insert and fix the battery with the plus (+)
facing in the same direction as the plus (+) on
the battery cover.

3. Put the battery cover on the remote control and
turn it clockwise to close.

Coin Finger

Caution

>

If you have long nails, do not open the battery
cover by using your nger. Or else, your nail
would be broken.

Finger

Front Panel

Getting Started 7

1

Getting Started

Getting Started

Getting Started8

Note

,

How to open the dock station

1

Display window

a

Displays each of functions.

Remote sensor

b

iPod/iPhone/iPad Dock (Lightning Connector)

c

Connects your iPod/iPhone/iPad.

Android device Dock (Micro USB)

d

Connects your Android device.

Speaker

e

Tag on

f

LG Tag On allows you to install and open “LG

Bluetooth Remote” app to NFC-enabled phone.

I : Switches the unit ON or OFF.

g 1/

F : Selects the function and input source.

(LG Sound Sync function is only selected by
using the SOUND SYNC button on the rear of
the unit.)

+/- (Volume) : Adjusts speaker volume.

Caution

>

Precautions in using the touch buttons

yUse the touch buttons with clean and dry

hands.

- In a humid environment, wipe out any
moisture on the touch buttons before using.

yDo not press the touch buttons hard to

make it work.

- If you apply too much strength, it can
damage the sensor of the touch buttons.

yTouch the button that you want to work in

order to operate the function correctly.

yBe careful not to have any conductive

material such as metallic object on the
touch buttons. It can cause malfunctions.

Back Panel

Getting Started 9

1

Getting Started

LIGHTING

a

Adjusts the brightness of lighting.

Wi-Fi SETTING

b

Connects your unit to the existing Wi-Fi

network.

AIR DIRECT/RESET

c

- Creates new Wi-Fi network with your unit.

- Initializes Wi-Fi network’s conguration.

SOUND SYNC

d

Synchronizes this unit and your LG TV.

Note

,

Wi-Fi SETTING and AIR DIRECT/RESET
buttons are only available in “AirPlay” function.

PORT.IN (3.5 mm)

e

Listens to music from your portable device.

USB Port

f

- Plays music le by using your USB cable for
iPod/iPhone/iPad.

- Charges your portable device.

DC IN (AC adapter input)

g

Connects the supplied AC adapter.

Getting Started10

Connecting the AC
Adapter

1

1. Connect the supplied AC power cord to the AC

Getting Started

adapter.

2. Connect the AC adapter cable to DC IN adapter
input.

3. Plug the AC power cord into an AC outlet. Then
the unit goes into standby mode.

About Ferrite Core
(Optional)

This ferrite core can reduce noises.

How to attach the ferrite core

1. Pull the stopper [a] of the ferrite core to open.

2. Wind the portable cable and USB cable on the
ferrite core.

3. Close the ferrite core until it clicks.

Caution

>

Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.

Operating 11

Basic Operations

iPod/iPhone/iPad Operation

You can enjoy the sound from your iPod/iPhone/
iPad through this unit. For details about iPod/
iPhone/iPad, refer to the iPod/iPhone/iPad User
Guide.

Note

,

yYou are recommended to remove the case

for your iPod/iPhone/iPad before you place
your iPod/iPhone/iPad into the dock.

yBefore connecting, please check the

position to connect. Refer to the page 7-8.

Connecting an iPod/iPhone/iPad
(Lightning connector) to Dock

1. Connect your iPod/iPhone/iPad (Lightning
connector) to Dock firmly.

When this unit is connected to power, your

iPod/iPhone/iPad is automatically turned on
and starts recharging even in standby mode.

Connecting an iPod/iPhone/iPad
(30-Pin/Lightning connector) to
USB port

1. Connect your iPod/iPhone/iPad (30-pin/
Lightning connector) to USB port using the
appropriate cable.

When this unit is connected to power, your

iPod/iPhone/iPad is automatically turned on
and starts recharging even in standby mode.

2. Press PFUNCTION or F to select (USB)
function.

2

Operating

2. Press PFUNCTION or F to select iPod
function.

Operating12

To Do this

2

Operating

Play

Pause

Skip

Search

During playback, press

U

return to the beginning of the
current le.

Playing less than 2 seconds,
press Y to go to the previous
le.

Playing after 3 seconds, press

Y

the le.

Press and hold
during playback and release it at
the point you want to listen to.

Press .

During playback, Press .

to go to the next le or to

to go to the beginning of

Compatible iPod/iPhone/iPad

The unit supports the models as follows ;

yiPod touch 3G, 4G, 5G

yiPod nano 4G, 5G, 6G, 7G

yiPhone 5

yiPhone 4S

yiPhone 4

yiPhone 3GS

yiPad mini

yiPad 2G, 3G, 4G

yiPad

Y/

Y/U

Note

,

yWhen you disconnect your iPod/iPhone/

iPad during playback, the playback pauses.

yWhen your iPod/iPhone/iPad is docked, you

cannot control the volume button of your
iPod/iPhone/iPad.

yIf the connection has an error, check these

problems as follows;

-Your iPod/iPhone/iPad is not connected
rmly.

-This unit recognizes your iPod/iPhone/iPad
as an unknown device.

-Your iPod/iPhone/iPad is exceptionally low
in power.

The battery needs to be charged.

/

If you charge the battery while iPod/

/

iPhone/iPad is extremely low in power, it
may take longer to be charged.

yYou may not control your iPod/iPhone/iPad

from this unit due to malfunction of iPod/
iPhone/iPad.

yDepending on your iPod/iPhone/iPad’s

software version, it may not be possible to
control your iPod/iPhone/iPad from this
unit. We recommend installing the latest
software version.

yIf you use an application, make a call, or

send and receive SMS text message, etc. on
iPod touch/iPhone/iPad, disconnect it from
iPod/iPhone/iPad dock of this unit and then
use it.

yIf you have a problem with your iPod/

iPhone/iPad, please visit www.apple.com/
support.

yiPod touch, iPhone and iPad have any

dierence in operation other than iPod.
You may need any additional control to use
them with this unit. (e.g. “slide to unlock”)

yDo not connect two iPad for charge at the

same time.

Operating 13

Android device Operation

You can enjoy the sound from your LG Android
device through the dock for Android device of this
unit. For details about Android device, refer to the
Android device User Guide.

To stream audio from your Android device through
this unit, you need :

yWith Android operation system : Ver 4.1(or later)

yWith a micro USB connector

With Android operation system (Version 4.0 or
below), this unit can only charge it and you can
enjoy audio through Bluetooth.

Note

,

yThis unit may not compatible with the

device that does not support the *AOA
(Android Open Accessory) 2.0 version.
It is possible that certain devices may not
support or be compliant with the AOA2.0
USB audio standard, resulting in the device
freezing or rebooting after being connected
and detached from the speaker system.
If you experience this problem, please
contact your device manufacturer. Your
device may need to be updated with the
latest Jellybean software and or the correct
AOA2.0 USB audio standard.

*About AOA (Android Open Accessory) 2.0
version ;
Audio output from Android device to
the Accessory and HID (Human Interface
Device)

yYou are recommended to remove the case

for your Android device before you connect
your Android device into the dock.

yBefore connecting, please check the

position to connect. Refer to the page 7-8.

yDepending on the size of your Android

device, some devices may not be docked.
In this case, you can enjoy audio through
Bluetooth.

1. Check the orientation of the micro USB
connector on your Android phone.

2. Connect your Android device firmly.

Note

,

You can rotate Android device Dock.
If you want to rotate the dock, pull the dock
upwards and then rotate it to the right or left.

Please use the supplied tweezers.

b

3. Press PFUNCTION or F to select
(ANDROID) function.

To Do this

Play

Pause

Skip

During playback, press

U

return to the beginning of the
current le.

Playing less than 2 seconds,
press Y to go to the previous
le.

Playing after 3 seconds, press

Y

the le.

Press .

During playback, Press .

to go to the next le or to

to go to the beginning of

2

Operating

a

Y/

2

Operating

Operating14

Note

,

yIf the connection has an error, check these

problems as follows;

-Your Android device is not connected rmly.

-This unit recognizes your Android device as
an unknown device.

-Your Android device is not booted.

-Check the setting of USB connection type
on your Android device.

yWhen you disconnect your Android device

from the dock during playback, the playback
may continue.

yIn case of no sound from this unit, adjust

the volume of your Android device.

yThe charging time may vary depending on

your Android device.

ySome Android devices may not be charged.

yDepending on the position and orientation

of the micro USB connector on your Android
device, connect it in portrait or landscape
position.

yYou may not control your Android device

from this unit due to malfunction of Android
device.

yDepending on your Android device’s

software version, it may not be possible
to control your Android device from this
unit. We recommend installing the latest
software version.

yIf you use an application, make a call, or

send and receive SMS text message, etc. on
Android device, disconnect it from Android
device dock of this unit and then use it.

yIf your Android device does not support

AOA (Android Open Accessory) 2.0 version,
this unit can only charge your Android
device even though Android device has OS

4.1 (or later).

Listening to Music from Your
External Device

The unit can be used to play the music from many
types of external device. (Portable cable is not
supplied as an accessory with this unit.)

MP3 or PMP etc

1. Connect the external device to the PORT.IN
connector of the unit.

2. Turn the power on by pressing 1 or 1/I.

3. Select the (PORTABLE) function by pressing

FUNCTION or F.

P

4. Turn the external device on and start playing it.

Operating 15

Using a Bluetooth
Wireless Technology

About Bluetooth

Bluetooth® is wireless communication technology
for short range connection.

The available range is within 10 meters.

(The sound may be interrupted when the
connection interfered by the other electronic wave
or you connect the bluetooth in the other rooms.)

Connecting individual devices under Bluetooth®
wireless technology does not incur any charges. A
mobile phone with Bluetooth® wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth® wireless technology.

Available Devices : Mobile phone, MP3, Laptop,
PDA.

Bluetooth Profiles

In order to use Bluetooth® wireless technology,
devices must be able to interpret certain proles.
This unit is compatible with following prole.

A2DP (Advanced Audio Distribution Prole)

Listening to Music of a
Bluetooth Device

Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.

1. Select the Bluetooth function by using the
FUNCTION or F.

P

Bluetooth LED ( ) blinks.

2. Operate the Bluetooth device and perform the

pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG Docking
(XX:XX)”.

Note

,

XX:XX means the last four digits of BT address.
For example, if your unit has a BT address such
as 9C:02:98:4A:F7:08, you will see “LG Docking
(F7:08)” on your Bluetooth device.

3. Enter the PIN code.

PIN code : 0000

Note

,

Depending on the Bluetooth device type,
some devices do not require a PIN code.

2

Operating

4. When this unit successfully is connected with

your Bluetooth device, Bluetooth LED ( ) stop
blinking.

Note

,

yDepending on the Bluetooth device type,

some devices have a dierent pairing way.

yTry pairing procedure if your device name is

not in the device list.

5. Listen to music.

To play a music stored on your Bluetooth device,

refer to your Bluetooth device’s user guide.
According to your Bluetooth device’s volume
level, the volume level of Bluetooth will be
adjusted.

Operating16

2

Operating

Note

,

ySound from the main set can be distorted

if you raise the volume of Bluetooth device
up to two-thirds or more.

yWhen you use the Bluetooth function,

adjust the volume of a Bluetooth device to
a proper level to listen to.

yAfter your device is connected to the unit

via Bluetooth, the function switches to BT
automatically. (Except for AirPlay and LG
Sound Sync function)

yIn LG Sound Sync function, Bluetooth is not

connected from your device.

yAfter searching for this unit on your

Bluetooth device, connect the Bluetooth
device to this unit. Then play music you
want.

yThe sound may be interrupted when

the connection interfered by the other
electronic wave.

yYou cannot control the Bluetooth device

with this unit.

yPairing is limited one Bluetooth device per

one unit and multi-pairing is not supported.

yAlthough the distance between your

Bluetooth and the set is less than 10 m,
there are obstacles between both, your
Bluetooth device cannot be connected.

yDepending on the type of the device,

you may not be able to use the Bluetooth
function.

yYou can enjoy wireless system using phone,

MP3, Notebook, etc.

yWhen not connected the Bluetooth,

Bluetooth LED (

yThe electrical malfunction due to devices

using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.

yWhen someone stands and interrupts

communication between Bluetooth device
and the player, the connection will be
disconnected.

) blinks.

Note

,

yIf the gotten away of the distance between

Bluetooth and the unit, the sound quality
is lower and lower. The connection will
disconnect when the space between the
Bluetooth and the unit gets out of the
operating range of Bluetooth.

yThe device with Bluetooth® wireless

technology is disconnected, if you turn o
the main unit or put the device away from
the main unit more than 10 m.

yIf the Bluetooth device is disconnected, you

should connect the Bluetooth device to
your unit.

Operating 17

Using Bluetooth App

About “LG Bluetooth Remote” App

“LG Bluetooth Remote” app brings a suite of new
features to this unit.

To enjoy more features, you are recommended to
download and install free “LG Bluetooth Remote”
app.

Install “LG Bluetooth Remote”
App through “Apple App Store” or
“Google Android Market (Google
Play Store)”

1. Tap the “Apple App Store” icon or “Google
Android Market (Google Play Store)” icon.

2. In the search bar, type in the “LG Bluetooth
Remote” and search it.

3. In the search result list, find and tap “LG
Bluetooth Remote” to start downloading
Bluetooth app.

4. Tap an icon for installation.

5. Tap an icon for downloading.

Note

,

yMake sure that your Bluetooth device is

connected to the Internet.

yMake sure that your Bluetooth device is

equipped with “Apple App Store” or “Google
Android Market (Google Play Store)”.

yIf you want to get more information, refer to

explanation of BT app in “Apple App Store”
or “Google Android Market (Google Play
Store)”.

Install “LG Bluetooth Remote App”
by using QR code

1. Install “LG Bluetooth Remote” app through QR
code. Use the scanning software to scan the QR
code.

(Apple iOS)

2. Tap an icon for installation.

3. Tap an icon for downloading.

Note

,

yMake sure that your Bluetooth device is

connected to the Internet.

yMake sure that your Bluetooth device has a

scanning software application. If you don’t
have one, download one from “Apple App
Store” or “Google Android Market (Google
Play Store)”.

(Android OS)

2

Operating

Operating18

Activate Bluetooth with “LG
Bluetooth Remote” App

“LG Bluetooth Remote” app helps to connect your
bluetooth device to this unit.

Note

,

In case of iOS device ;

After performing the pairing operation,

2

Operating

activate Bluetooth with LG Bluetooth Remote
App.

1. Tap “LG Bluetooth Remote” app icon on the
home screen to open “LG Bluetooth Remote”
app, and go to the main menu.

2. Tap [Setting] and select the unit you want.

3. If you want to get more information to operate,
tap [Setting] and [Help].

Note

,

yBT app will be available in the software

version as follow;

-iOS O/S : Ver 4.3 (or later)

-Android O/S : Ver 2.3.3 (or later)

yIf you place your iPod touch/iPhone/iPad

into the dock of this unit while your iPod
touch/iPhone/iPad is connected to this
unit by Bluetooth connection, and you
switch this unit to iPod mode, the Bluetooth
connection is deactivated.

yIf you place your Android device into the

dock of this unit while your Android device
is connected to this unit by Bluetooth
connection, and you switch this unit to
ANDROID mode, the Bluetooth connection
is deactivated.

yThis unit does not support the multi-pairing.

If this unit is already connected with other
Bluetooth device, disconnect that device
and then try again.

yIf you use “LG Bluetooth Remote” app for

operation, there would be some dierences
between “LG Bluetooth Remote” app and
the supplied remote control. Use the
supplied remote control as necessary.

yDepending on the Bluetooth device, “LG

Bluetooth Remote” app may not work.

y“LG Bluetooth Remote” app for Apple iOS is

slightly dierent from that of Android OS.

yThe connection you’ve made may be

disconnected if you select other application
or change the setting of the connected
device via “LG Bluetooth Remote” app. In
such a case, please check the connection
status.

yTo prevent a malfunction, you are

recommended to connect only one device
to this unit.

yDon’t connect your smart device by using

a cable to USB port. Or else the Bluetooth
connection will be disconnected.

yAfter connection of BT app, music may be

output from your device. In this case, try
connecting procedure again.

Operating 19

Using AirPlay

Apple AirPlay technology enables you to play your iTunes music library, hosted on a Mac, PC, iPhone, iPod
touch, or iPad on any AirPlay-enabled device connected to the Wi-Fi network.

To stream audio wirelessly by AirPlay, you need :

Wi-Fi Sharing Air Direct Webpage

Compatible Apple

Device

iOS Version

iTune Version Ver.10.2.2 (or later)

Wireless LAN

(internal antenna)

Security Mode

Webpage address

yThis unit should be connected to the same local network as your iTunes host device through the Wi-Fi

router.

yDepending on the kind and operating system or the application’s version and the setting status of AirPlay-

enabled device connected to this unit, AirPlay may not be operated normally.

yDepending on the Network environment and your device state, It may take long time to connect the unit.

yWPA supports TKIP and WPA2 supports AES rst.

yTo prevent a malfunction, you are recommended to connect only one device to this unit.

iPad mini, iPad4, iPad3, iPad2, iPad, iPhone5, iPhone 4S, iPhone 4, iPhone 3GS,
iPod touch 5G, iPod touch 4G, iPod touch 3G

Ver.5.0 (or later) Ver.4.3.3 (or later)

802.11 b/g

WPA(TKIP/AES)

WPA2(TKIP/AES)

WEP with

Open mode

-

WEP with

Open / Shared mode

192.168.1.1

(Optional for security)

WPA(TKIP/AES)

WPA2(TKIP/AES)

WEP with

Open mode

192.168.1.111

2

Operating

Operating20

Connecting your Wi-Fi device
to Wi-Fi network

Option 1 : Using Wi-Fi Sharing

Note

,

Make sure that you set security mode to WPA­TKIP or WPA2-AES in Wi-Fi network router to

2

Operating

connect the network more quickly.

1. Connect your iPod touch/iPhone/iPad to the
network first, then connect it to the iPod/
iPhone/iPad Dock. Please touch your iPod
touch/iPhone/iPad before you use.

Option 2 : Using Air Direct without
security

1. Press PFUNCTION on the remote control or
F on the unit to select AirPlay function.

2. Press AIR DIRECT/RESET on the unit. Then
“AirPlay” icon blinks with white and amber
color alternately. When the unit is changed to
Air Direct Mode, “AirPlay” icon stops blinking
and stays in white color.

3. In the network list, find and select “LG AIR
DIRECT XXXXXX”.

2. Press PFUNCTION on the remote control or
F on the unit to select AirPlay function.

3. Press Wi-Fi SETTING on the unit. “AirPlay”
icon will blink with white and amber color
alternately.

4. Tap “Allow” from popup window on your iPod
touch/iPhone/iPad. Then network information
will be shared to the unit.

5. When the unit is connected to the network,
“AirPlay” icon will stop blinking and stay in
amber color.

4. Use AirPlay after your iPod touch/iPhone/iPad
or PC/MAC is connected.

Note

,

yIf “LG AIR DIRECT XXXXXX” is not in the list,

try to scan the available Wi-Fi networks
again.

yWhen your iPod touch/iPhone/iPad or

PC/MAC is connected to “LG AIR DIRECT
XXXXXX” , you can’t use internet.

yWhen you disconnect Air Direct, this unit

will automatically attempt to reconnect Wi­Fi sharing or Webpage it has last accessed.

Using Air Direct with Security mode

5. Launch Apple Safari browser or Microsoft
Internet Explorer browser on your iPod touch/
iPhone/iPad or PC/MAC.

6 Type in “192.168.1.1” at the browser address bar

and confirm.

7. Set security mode and insert password.

- hexadecimal (0-9, A-F) 10 or 26 digits.

- 5 or 13 ASCII characters.

8. Tap or click “OK”

9. In the network list, find and select “LG AIR
DIRECT XXXXXX” again.

Operating 21

Note

,

yIf you want to deactivate Air Direct function,

press AIR DIRECT/RESET.

yIf you want to initializes Wi-Fi network’s

Security Mode, press and hold

RESET

.

yWhen you change the security mode, please

disconnect the existing connection and then
reconnect unit to AirPlay-enabled device.

yIf connection setup fails to complete, press

and hold

AIR DIRECT/RESET

AIR DIRECT/

.

Option 3 : Using Webpage

The new Wi-Fi network created by this unit only
allows access of one Wi-Fi enabled device. To avoid
interference from any other Wi-Fi devices, you are
recommended to temporarily disable the Wi-Fi
function on your other Wi-Fi devices.

Note

,

y“LG AUDIO Setup XXXXXX” is the temporary

and assistant Wi-Fi network for connection
of this unit to your home Wi-Fi router.

yWhile your iPod touch/iPhone/iPad or your

Wi-Fi enabled PC/Mac is connecting to “LG
AUDIO Setup XXXXXX” network, you can not
use Internet.

2

Operating

10. If you want to get back to non-security mode,
select security type as None.

1. Press PFUNCTION on the remote control or
F on the unit to select AirPlay function.

2. Press and hold Wi-Fi SETTING. “AirPlay”
icon will blink with white and amber color
alternately.

3. After 20 seconds, select “LG AUDIO Setup
XXXXXX” in the network list on your iPod/
iPhone/iPad or PC/MAC. “AirPlay” icon will blink
quickly.

Note

,

yIf “LG AUDIO Setup XXXXXX” is not in the

list, try to scan the available Wi-Fi networks
again.

yIf you want to deactivate Webpage function,

press and hold Wi-Fi SETTING.

Operating22

4. Launch Apple Safari browser or Microsoft
Internet Explorer browser on your iPod touch/
iPhone/iPad or PC/MAC.

5. Type in “192.168.1.111” at the browser address
bar and confirm.

6. Select your network name (SSID) from “Wireless
Network”.

7. Enter the network key if required.

8. Tap or click “OK” to proceed with network

2

Operating

settings change.

-Follow the on-screen instructions to change and
conrm the internal Wi-Fi settings of this unit.

-Please wait about 30 seconds and more.

Note

,

yIf you use other characters than the English

alphabet or digits for the SSID name of your
access point or wireless router, it may be
displayed dierently.

yWEP security mode generally have 4 keys

available on an access point setting. If your
access point or wireless router use WEP
security, enter the security code of the key
“No.1” to connect on your home network.

yAn Access Point is a device that allows you

to connect to your home network wirelessly.

9. If this unit is connected to your selected home
Wi-Fi network successfully, “AirPlay” icon stops
blinking and stays in amber color.

10. If you have security on your access point, you
need to input the security code as necessary.

Operating 23

Streaming audio from your
iTunes music library to this
unit

Note

,

Make sure that your iTunes host device is
connected to the same Wi-Fi network as this
unit. Your iTunes device can be an iPod touch/
iPhone/iPad installed with iOS 4.3.3 (or later) or
a Wi-Fi enabled PC/Mac installed with iTunes

10.2.2 (or later).

Stream from your iPod touch/
iPhone/iPad

1. Launch the “Music” application on your iPod
touch/iPhone/iPad.

2. Tap on the AirPlay icon .

2

Operating

3. Select “LG AUDIO XXXXXX” (or user customized
name) from the AirPlay list.

Operating24

4. Select a media file and start play.

-After a while, you will hear music from this
unit.

-Depending on your connection environment
and network condition, audio output may
not be normal.

2

Operating

Note

,

If you fail to hear music after successful setup,
do one of the following on your iPod touch/
iPhone/iPad:

yDisconnect and then re-connect to the

same Wi-Fi router again.

yClose all applications running at the

background.

yPower o and then power on your iPod

touch/iPhone/iPad again.

Operating 25

Other Operations

LG Tag On

LG Tag On allows you to install and open “LG
Bluetooth Remote” app to NFC-enabled phone.

1. Activates the NFC feature of your NFC-enabled
phone.

2. Turn on the unit.

3. Tag the back of your NFC-enabled phone over
the unit.

-If “LG Bluetooth Remote” app is not installed on
your NFC-enabled phone, the linked screen with
“LG Bluetooth Remote“ app is displayed.

-If “LG Bluetooth Remote” app is installed on your
NFC-enabled phone, “LG Bluetooth Remote” app
is activated.

Note

,

yYou must activate the NFC feature of your

NFC-enabled phone.

yIf your NFC-enabled phone’s screen is

locked, it will not read the NFC.

yIf your smart phone case is plated with

chrome, NFC is unavailable. Depending on
your case’s material or thickness, NFC may
not be read well.

LG Sound Sync

You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo
on your TV.

Controllable function by LG TV’s remote control :
Volume up/down, mute

Refer to the TV’s instruction manual for the details
of LG Sound Sync.

Note

,

yYou can also use the remote control of

this unit while using LG Sound Sync. If you
use TV’s remote control again, the unit
synchronizes with the TV.

yWhen the connections failed, make sure of

the condition of the TV and power of it.

yMake sure of the condition of this unit and

the connection in the cases below when
using LG Sound Sync.

-Turned o the unit.

-Changing the function to the others.

-Disconnecting the wireless connection
caused by interference or a distance.

With wireless connection

1. Turn on the unit.

2. Press SOUND SYNC on the rear of the unit to
select the (LG Sound Sync) function.

3. Set up LG Sound Sync (Wireless) on the TV. Refer
to the TV’s instruction manual.

If your unit and LG TV are connected normally,
icon will stop blinking and stay in amber color.

2

Operating

Operating26

Note

,

yThe device with Bluetooth® wireless

technology will be disconnected, if LG
Sound Sync function is selected. Bluetooth
remote app you’ve already connected is
disconnected either.

yIn LG Sound Sync function, you can search

and connect this unit through LG TV only.

2

Operating

yIn LG Sound Sync function, the volume step

of this unit will be changed to the volume
step of LG TV.

Setting BASS (BASS BLAST)
sound effect

You can listen to music by setting BASS (BASS
BLAST) sound eect. Press BASS EQ repeatedly.
Then you can reinforce BASS (BASS BLAST) sound
eect.

BASS (BASS BLAST) <-> BYPASS

Turning Off the Sound
Temporarily

Press @to mute the sound. You can mute
the sound in order, for example, to answer
the telephone. To cancel mute function, press

again or adjust volume level by pressing

@

+/-(Volume).

Adjusting the brightness of
the lighting

You can adjust the brightness of the lighting.

Press LIGHTING repeatedly. Then the brightness of
the lighting will be changed.

MAX -> MIDDLE -> OFF -> MAX -> ...

Auto Power Down

This unit will power itself down to save electronic
consumption in case main unit is not connected to
external device and is not used for 25 minutes.

Also this unit will power down if no input is
connected using the analogue input after six hours.

3 Troubleshooting

Troubleshooting

Problem Cause & Correction

No Power.

No sound.

yPlug in the power cord.

yCheck the condition by operating other electronic devices.

yPress PFUNCTION or F and check the selected function.

yAdjust the volume of your portable device.

yCheck that the sound of the unit is muted.

Troubleshooting 27

iPod/iPhone/iPad does
not work.

Audio is not output
from your docked
Android device.

The remote control
does not work properly.

Bluetooth pairing does
not work well.

yConnect iPod/iPhone/iPad to the unit correctly.

yMake sure that you are using Android system of version 4.1 or later.

yConnect Android device to the unit correctly.

yThe remote control is not pointed at the remote sensor of the unit.

yThe remote control is too far from the unit.

yThere is an obstacle in the path of the remote control and the unit.

yThe battery in the remote control is exhausted.

ySwitch Bluetooth o and on again on your Bluetooth device, then try pairing

again.

yBe sure your Bluetooth device is on.

yRemove the obstacle in the path of the Bluetooth device and the unit.

yDepending on the type of the Bluetooth device or surrounding

environment, your device may not be paired with the unit.

yWhen your Bluetooth device have been already connected with other unit,

disconnect the Bluetooth connection rst. Then you can control your unit
through BT app.

yDepending on the Bluetooth device, BT app may work restrictively not work.

yThe connection you’ve made may be disconnected if you select other

application or change the setting of the connected device via BT app. In
such case, please check the connection status.

3

Troubleshooting

4 Appendix

Appendix28

About LED condition

Function Condition LED Description

4

Appendix

iPod

Android

USB

Bluetooth

Portable

LG Sound

Sync

AirPlay

iPod Connected

No iPod Blinks Slowly

Android Connected

Android Loading Blinks Quickly

No Android Blinks Slowly

USB

No USB Blinks Slowly

Bluetooth Paired

Bluetooth Ready Blinks Slowly

Portable In

LG Sound Sync Connected

LG Sound Sync Ready Blinks Slowly

AirPlay Disconnected

Using Wi-Fi Sharing

Connecting

Using Wi-Fi Sharing

Connected

Using Air Direct

Preparing

Using Air Direct

Connected

Using Webpage

Searching AirPlay enabled device

Using Webpage

Searched AirPlay-enabled device

Using Webpage

Connected

(Amber)

(Amber) (White)

(Amber)

(Amber) (White)

(White)

(Amber) (White)

(Amber) (White)

(Amber)

Blinks Slowly

Blinks Quickly

Blinks Quickly

Blinks Slowly

Blinks Quickly

Appendix 29

Trademarks and
Licenses

“Made for iPod,” “Made for iPhone,” and “Made for
iPad” mean that an electronic accessory has been
designed to connect specically to iPod, iPhone,
or iPad, respectively, and has been certied
by the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod, iPhone, or
iPad may aect wireless performance.

Bluetooth® wireless technology is a system which
allows radio contact between electronic devices
within a max. range of 10 meters.

Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth® wireless
technology.

The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.

Other trademarks and trade names are those of
their respective owners.

Handling the Unit

When Shipping the Unit

Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.

Keeping the Exterior Surfaces Clean

Do not use volatile liquids such as insecticide spray
near the unit.

Wiping with strong pressure may damage the
surface.

Do not leave rubber or plastic products in contact
with the unit for a long period of time.

Cleaning the Unit

To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.

4

Appendix

The Wi-Fi CERTIFIED Logo is a certication mark
of the Wi-Fi Alliance.

Appendix30

Specifications

General

AC adapter requirements DC 18 V 0 2.67 A, 100 - 240 V, 50/60 Hz

Power consumption 48 W

Dimensions (W x H x D) (450 x 200 x 227) mm

Net Weight (Approx.) 5.8 kg

Operating temperature 5 °C to 35 °C (41 °F to 95 °F)

Operating humidity 5 % to 90 %

Bus Power Supply

Inputs

PORT. IN 0.5 Vrms (3.5 mm stereo jack)

USB/iPod/iPhone/iPad : 5 V 0 2.1 A

Micro USB : 5 V 0 1.0 A

4

Appendix

Amplier

Output Power 40 W X 2 ch (4 Ω at 1 kHz)

T.H.D 15 %

Speakers

Type built-in

Impedance 4 Ω

Rated Input Power 40 W

Max Input Power 80 W

yDesign and specications are subject to change without notice.

5 Warranty

Warranty 31

Warranty

Technology with the human touch

GUARANTEE

• LG Electronics U.K. Ltd. will provide the following services in order toexpedite this Guarantee.

1. All faulty components which fail due to defective manufacture will be replaced free of charge for a
period of 12 months from the original date of purchase.

2. The dealer (or his service agent) who sold the product will be
reimbursed for any labour provided in the repair of this LG equipment, for a period of 12 months from
the original date of purchase. These claims must be made in accordance with the published scale of
service charges and relevant claims procedure.

PLEASE NOTE:

A. The dealer may restrict the guarantee to the original purchaser.

B. The dealer is not obliged to carry out service under guarantee if unauthorized modifications are made

to the apparatus, or if non standard components are used or if the serial number of the apparatus is
removed, defaced, misused, or altered.

C. Any claims made under guarantee must be directed to the dealer from whom the equipment was

originally purchased. The dealer may, before carrying out service under guarantee, require a receipted
account as evidence of the date of purchase.

D. We respectfully point out that your dealer is not obligated to replace batteries if they become

exhausted or worn in use.

E. Aerial alignment and consumer control adjustments are not covered by this guarantee.

This guarantee does not affect your statutory rights.

• REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:

RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.

• Product Registration Card :

It is helpful to complete at least your name, address, phone, model & serial numbers and return it. This
will enable LG to assist you in the future should you lose your receipt, your units be stolen, or should
modifications be necessary.

• To obtain information or assistance: Call 0870 873 5454 Monday-Friday 9.00am-4.30pm

5

Warranty

MODEL NO.* SERIAL NO.* DATE OF PURCHASE.*

In all cases of diculty - consult your LG dealer from whom the product was purchased

LGEUK Website : www.lge.co.uk
( service website : www.lgelectronics.co.uk )