LG ND8530 Owner's Manual

OWNER’S MANUAL

ENGLISH

Music in Style

Wireless Speaker With
Dual Dock

Please read this manual carefully before operating
your set and retain it for future reference.

FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO
INNER PAGE OF BACK COVER.

ND8530

Getting Started2

Safety Information

1

Getting Started

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

enclosure that may be of sucient magnitude to
constitute a risk of electric shock to persons.

instructions in the literature accompanying the
product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.

WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.

NOTICE: For safety marking information including
product identication and supply ratings, please
refer to the main label on the bottom of the
apparatus.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s

The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon
a dedicated circuit;

That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.

This device is equipped with a portable battery or
accumulator.

Safety way to remove the battery or the
battery from the equipment: Remove the

old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.

Getting Started 3

CAUTION:

yThe apparatus shall not be exposed to water

(dripping or splashing) and no objects lled with
liquids, such as vases, shall be placed on the
apparatus.

yNo naked ame sources, such as lighted candles,

should be placed on the apparatus.

yOnly use the AC adaptor supplied with this

device. Do not use a power supply from another
device or another manufacturer. Using any other
power cable or power supply may cause damage
to the device and void your warranty.

yTo avoid re or electric shock, do not open the

unit. contact to qualied personnel only.

yDo not leave the unit in a place near the heating

appliances or subject to direct sunlight, moisture,
or mechanical shock.

yDo not leave the unit on an unstable place such

as high shelves. It may fall down because of the
vibration of the sound.

Disposal of your old appliance

1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by
the European Directive 2002/96/EC.

2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.

3. The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.

4. For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.

Disposal of waste batteries/accumulators

1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product
it means they are covered by
European Directive 2006/66/EC.

2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury,0.002% of cadmium or

0.004% of lead.

3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or
the local authorities.

4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.

5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.

1

Getting Started

Getting Started4

LG Electronics hereby declares that this/these
product(s) is/are in compliance with the essential

1

requirements and other relevant provisions of

Getting Started

Directive 1999/5/EC, 2004/108/EC, 2006/95/EC,
2009/125/EC and 2011/65/EU.

Please contact to the followingaddress for
obtaining a copy of the DoC (Declaration of
Conformity).

Contact oce for compliance of this product:

LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands

yPlease note that this is NOT a Customer Service

contact point. For Customer Service Information,
see Warranty Card or contact the dealer that you
purchased this product.

In door use only.

RF Radiation Exposure Statement

This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body.

POWER: This unit operates on a mains supply
of 100-240V~, 50/60Hz.

Wiring: This unit is supplied with a BS 1363
approved main plug. When replacing the fuse,
always use of the same rating approved to BS

1362. Never use this plug with the fuse cover
omitted. To obtain a replacement fuse cover
contact your dealer. If the type of plug supplied
is not suitable for the mains sockets in your
home, then the plug should be removed and
a suitable type tted. Please refer to the wiring
instructions below:

Warning: A mains plug removed from the mains
lead of this unit must be destroyed. A mains
plug with bared wires is hazardous if inserted in
a mains socket. Do not connect either wire to
the earth pin, marked with the letter E or with
the earth symbol 6 or coloured green or green
and yellow. If any other plug is tted, use same
rating of fuse in the plug.

Important: The wires in this mains lead are
coloured in accordance with the following codes:

- BLUE: NEUTRAL, BROWN: LIVE - As the
colours of the wires in the mains lead of this unit
may not correspond with the coloured marking
identifying the terminals in your plug, proceed
as follows: The wire which is coloured blue must
be connected to the terminal which is marked
with the letter N or coloured black. The wire
which is coloured brown must be connected to
the terminal which is marked with the letter L or
coloured red.

Table of Contents

Table of Contents 5

1 Getting Started

2 Safety Information
6 Main Features
6 Accessories
6 Introduction
7 Remote Control
8 Front Panel
10 Back Panel
11 Connecting the AC Adapter
11 About Ferrite Core (Optional)

2 Operating

12 Basic Operations
12 – iPod/iPhone/iPad Operation
13 – Compatible iPod/iPhone/iPad
14 – Android device Operation
15 – Listening to Music from Your External

Device
16 Using a Bluetooth Wireless Technology
16 – Listening to Music of a Bluetooth

Device
18 – Using Bluetooth App
20 Other Operations
20 – LG Tag On
20 – LG Sound Sync
21 – Setting BASS (BASS BLAST) sound

effect
21 – Turning Off the Sound Temporarily
21 – Adjusting the brightness of the

lighting
21 – Auto Power Down

3 Troubleshooting

22 Troubleshooting

4 Appendix

23 About LED condition
24 Trademarks and Licenses
24 Handling the Unit
25 Specifications

5 Warranty

26 Warranty

1

2

3

4

5

Getting Started6

Main Features

Made for iPod/iPhone/iPad or

1

Getting Started

Android device

Enjoys music from iPod/iPhone/iPad or Android
device with simple connection.

Portable In

Listens to music from your portable device.

LG Sound Sync

Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.

LG Bluetooth Remote

You can control this unit with your iPod touch/
iPhone/iPad or Android device via Bluetooth. This
unit and your device must be paired for Bluetooth.
Visit “Apple App Store” or “Google Android Market
(Google Play Store)” or use the QR code shown
below to search for “LG Bluetooth Remote” app. For
detailed information, refer to page 18-19.

Accessories

Please check and identify the supplied accessories.

Remote control (1) Battery (1)

AC adapter (1) Power cord (1)

Tweezers (1)

Introduction

(Apple iOS)

(Android OS)

Symbol Used in This Manual

Note

,

Indicates special notes and operating features.

Caution

>

Indicates cautions for preventing possible damages
from abuse.

Getting Started 7

Remote Control

(Power): Switches the unit ON or OFF.

1

FUNCTION : Selects the function and input

P

source. (LG Sound Sync function is only selected by
using the SOUND SYNC button on the rear of the
unit.)

+/- (Volume) : Adjusts volume of speaker.

BASS EQ : Reinforce BASS (BASS BLAST) sound

effect.

Y/U

-Skips fast Backward or Forward.

-Searches for a section within a le.

@
?

(Skip/Search) :

(Play/Pause) : Starts or pause playback

: Mutes the sound.

: The button is not available for any function.

Caution

>

The battery used in this device may present a
re or chemical burn hazard if mistreated. Do
not recharge, disassemble, incinerate, or heat
above 100 °C (212 °F). Replace the battery part
no. CR2025 only. Use of another battery may
present a risk of re or explosion. Dispose of
used battery. Keep battery away from children.
Do not disassemble or dispose of in re.

Battery Installation

You have two ways to open the battery cover.

1. Turn the battery cover counterclockwise by
using a coin or your finger. Then take the battery
cover.

Coin

2. Insert and fix the battery with the plus (+)
facing in the same direction as the plus (+) on
the battery cover.

3. Put the battery cover on the remote control and
turn it clockwise to close.

Coin Finger

Caution

>

If you have long nails, do not open the battery
cover by using your nger. Or else, your nail
would be broken.

Finger

1

Getting Started

Getting Started8

Front Panel

1

Getting Started

Note

,

How to open the dock station

Getting Started 9

1

Getting Started

Display window

a

Displays each of functions.

Remote sensor

b

iPod/iPhone/iPad Dock (Lightning Connector)

c

Connects your iPod/iPhone/iPad.

Android device Dock (Micro USB)

d

Connects your Android device.

Speaker

e

Tag on

f

LG Tag On allows you to install and open “LG

Bluetooth Remote” app to NFC-enabled phone.

I : Switches the unit ON or OFF.

g 1/

F : Selects the function and input source.

(LG Sound Sync function is only selected by
using the SOUND SYNC button on the rear of
the unit.)

+/- (Volume) : Adjusts speaker volume.

Caution

>

Precautions in using the touch buttons

yUse the touch buttons with clean and dry

hands. - In a humid environment, wipe out
any moisture on the touch buttons before
using.

yDo not press the touch buttons hard to

make it work. - If you apply too much
strength, it can damage the sensor of the
touch buttons.

yTouch the button that you want to work in

order to operate the function correctly.

yBe careful not to have any conductive

material such as metallic object on the
touch buttons. It can cause malfunctions.