LG P42W22B, P42W22, MU-42PZ15A-AALZKZ, MU-42PZ11A-AALZKZ Owner’s Manual
zenit
Please read this operating guide carefully before
using the Monitor.
Keep the operating guide with the Monitor.
For future reference, write down the serial number
on the back of the Monitor in the space 3rovided
below.
Model number :
Serial number :
Table of Contents
First Step
WARNINGS .............................................................. 4
SAFETY INSTRUCTIONS ........................................ 5
Monitor Overview
Front Panel Controls ................................................ 8
Connection Panel Overview ..................................... 9
Remote Control Key Functions/Accessories .......... 10
Monitor Installation ................................................. 12
Equipment Connections and Setup
VCR Setup .............................................................. 14
Cable TV Setup ...................................................... 16
External AV Source Setup ...................................... 17
DVD Setup .............................................................. 18
DTV Setup .............................................................. 19
PC Setup ................................................................ 20
PC Mode Feature Check (Overview) ..................... 22
PC Mode Adjustments ............................................ 23
Picture In Picture (PIP) Function ............................ 26
Remote Control Setup ............................................ 29
Basic Features Setup and Operation
Turning on the Monitor ........................................... 30
Menu Language Selection ...................................... 31
Checking Features ................................................. 32
Sleep Timer
Setting Sleep Timer (Monitor turn-off time) ............ 33
Picture & Sound
Auto Picture Control ............................................... 34
Adjusting Picture Appearance ................................ 35
DRP (Digital Reality Picture) .................................. 36
Adjusting Sound: Bass, Treble, Balance ................ 37
Auto Sound Control ................................................ 38
AVL (Auto Volume Leveler) .................................... 39
Special Features
Using Still Function ................................................. 40
Using the Screen Options ...................................... 41
Adjusting OSD Transparency ................................. 42
Color Temperature Adjustments ............................. 43
Setting Picture Format ............................................ 44
External Control Device Setup ............................... 45
Others
Maintenance ........................................................... 53
Troubleshooting Checklist ...................................... 54
Product Specifications ............................................ 55
WARNINGS
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to consti-
tute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
CAUTION:
Donot attempt to modify this product in any way without written authorization from Zenith Etectromcs
Corporation. Unauthorized modification couldvoid the user'sauthority to operate this product.
COMPLIANCE:
The responsibte party for this product's com_tiance is:
Zenith Etectronics Corporation
2000 Ni[tbrook Drive
Uncotnshire. I[ 60069. USA
Phone: 1-847-941-8000
FCC NOTICE
• P42W22 : A Class A digital device
This equipment has been tested and found to comply with the limitsfor a Class A digital device pursuant to
Part 15 of tile FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference when the equipment is operated in a commercial environment. This equipment generates, uses.
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction man-
ual. may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
• P42W22B, P42W22H : A Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential instal ation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However. there is no guarantee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on. the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
4
SAFETY INSTRUCTIONS
Important safeguards for you and your new product
Your product has been manufactured and tested with your safety in mind. However, improper
use can result in potential electrical shock or fire hazards. To avoid defeating the safeguards
that have been built into your new product, please read and observe the following safety
points when installing and using your new prod uct, and save them for future reference.
Observing the simple precautions discussed in this booklet can help you get many years of
enjoyment and safe operation that are built into your new product.
This product complies with all applicable U.S. Federal safety requirements, and those of the
Canadian Standards Association.
1. Read Instructions
All the safety and operating instructions
should be read before the product is operat-
ed.
2. Follow Instructions
slide or fall, causing serious injury to a child
or adult, and serious damage to the product.
Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer,
or sold with the product. Any mounting of
the product should follow the manufacturer's
instructions, and should use a mounting
All operating and use instructions should be accessory recommended by the manufac-
followed, turer.
3. Retain Instructions
The safety and operating instructions should
be retained for future reference.
8. Transporting Product
A product and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
4. Heed Warnings
product and cart combination to overturn.
All warnings on the product and in the oper-
ating instructions should be adhered to.
5. Cleaning
Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners
PORTABLE CART WARNING
or aerosol cleaners. Use a damp cloth for
cleaning.
9. Attachments
6. Water and Moisture
Do not use this product near water, for
example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet base-
ment, or near a swimming pool.
7. Accessories Carts and Stands
Do not place this product on a slippery or operation of the product and to protect it
tilted surface, or on an unstable cart, stand, from overheating, and these openings must
tripod, bracket, or table. The product may not be blocked or covered.
Do not use attachments not recommended
by the product manufacturer as they may
cause hazards.
10. Ventilation
Slots and openings in the cabinet are pro-
vided for ventilation and to ensure reliable
iiiiiiiiiiiiiiii¸
iiiiiiiHiiiiiii_
iiiiiiiHiiiiiii_
iiiiiiiiiiiiiiL__
iiiiiiiiiiiiii_
iiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiF
iiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiil
iiiiiiiiiiiiiiill
iiiiiiiiiiiiiiiil
iiiiiiiiii!_!
iiiiiiiiiiiiiiiiiiiiiiii_il
iiiiiiiiiiiiiii_i_;il
iiiiiiiiiiiiiiii_!
iiiiiiiiiiiiiiiiiiiiiiiiii_i
iiiiiiiiiiiiiiiiiiiiiiii....
(Continued on next page)
5
SAFETY INSTRUCTIONS
(Continued from previous page)
The openings should never be blocked by in wire to an antenna discharge unit, size of
placing the product on a bed, sofa, rug, or grounding conductors, location of antenna-
other similar surface. This product should
not be placed in a built-in installation such
as a bookcase or rack unless proper ventila-
tion is provided or the manufacturer's
instructions have been adhered to.
11. Power Sources
This product should be operated only from GroundClamD
the type of power source indicated on the
marking label. If you are not sure of the type
of power supply to your home, consult your
product dealer or local power company. For
products intended to operate from battery
power, or other sources, refer to the operat-
ing instructions.
12. Power-Cord Polarization
This product is equipped with a three-wire
grounding type plug, a plug having a third For added protection for this product
(grounding) pin. This plug will only fit into (receiver) during a lightning storm, or when
the grounding-type power outlet. This is a it is left unattended and unused for long
safety feature. If you are unable to insert the periods of time, unplug it from the wall outlet
plug into the outlet, contact your electrician and disconnect the antenna or cable sys-
to replace your obsolete outlet. Do not tem. This will prevent damage to the product
defeat the safety purpose of the grounding- due to lightning and power-line surges.
type plug.
13. Power-Cord Protection
Power-su pply cords should be routed so located in the vicinity of overhead power
that they are not likely to be walked on or lines or other electric light or power circuits,
pinched by items placed upon or against
them, paying particular attention to cords at
plugs, convenience receptacles, and the
point where they exit from the product.
14. Outdoor Antenna Grounding
If an outside antenna or cable system is
connec[ed to the product, be sure the
antenna or cable system is groundea so as cords as this can result in a risk of fire or
to provide some protection against voltage electric shock.
surges and built-up static charges. Article
810 of the National Electrical Code (U.S.A.), 18. Object and Liquid Entry
ANSI/NFPA 70 provides information with
regard to proper grounding of the mast and Never push objects of any kind into this
supporting structure, grounding of the lead-
discharge unit, connection to grounding
electrodes, and requirements for the
grounding electrode.
Example of Grounding According to National
Electrical Code Instructions
NEC - National Electrical Code
=
_ Antenna Lead roW{reAntenna Discharge UnJl
_ rounding Conductor
_ Ground Clam#s
/
(NEC Section 810-20)
(NEe Section 810-21
Power Service Grounding
Electrode System (NEC
Art 250. Part HI
15. Lightning
16. Power Lines
An outside antenna system should not be
or where it can fall into such power lines or
circuits. When installing an outside antenna
system, extreme care should be taken to
keep from touching such power lines or cir-
cuits as contact with them might be fatal.
17. Overloading
Do not overloadwall outletsand extension
productthroughopeningsastheymay
touchdangerousvoltagepointsorshort-out
partsthatcouldresultinafireorelectric
shock.Neverspillliquidofanykindonthe
product.
19. Servicing
Do not attempt to service this product your- _..........
self as opening or removing covers may me proaum snouJa De moumea _o a wall or
expose you to dangerous voltage or other
hazards. Refer all servicing to qualified ser-
vice personnel.
20. Damage Requiring Service
Unplug this product from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
a. If the power-supply cord or plug is dam-
aged.
b. If liquid has been spilled, or objects have
fallen into the product.
c. If the product has been exposed to rain
or water.
d. If the product does not operate normally
by following the operating instructions.
Adjust only those controls that are cov-
ered by the operating instructions as an
improper adjustment of other controls
may result in damage and will often
require extensive work by a qualified
technician to restore the product to its
normal operation.
e. If the product has been dropped or the
cabinet has been damaged.
f. If the product exhibits a distinct change
in performance.
22. Safety Check
Upon completion of any service or repairs to
this product, ask the service technician to
perform safety checks to determine that the
product is in proper operating condition.
23. Wall or Ceiling Mounting
ceiling only as recommended by the manu-
facturer. The product may slide or fall, caus-
ing serious injury to a child or adult, and
serious damage to the product.
24. Heat
The product should be situated away from
heat sources such as radiators, heat regis-
ters, stoves, or other prod ucts (including
amplifiers) that produce heat.
iiiiiiiiiiiiiiiiiii_;i_!i,!i,il,
iiiiiiiiiiiiiiiiii
iiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiil;;ililili
21. Replacement Parts
When replacement parts are required, be
sure the service technician has used
replacement parts specified by the manufac ......
turer or have the same characteristics as
the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
iiiiiiiiiiiiiiiiiiiiiiiiii_i
7
Front Panel Controls
Front Panel Controls
Main power button
Remote control ser
Power standby indicato_
Illuminates red in ._
model Illuminates
when the Mon tor is
turned c
INPUT SELECT button
Sub power button
Connect=on Panel Overv=ew
Back Panel
"o
=q
u_
O
C
EXTERNAL SPEAKER i RGB-PC INPUT (VGA/SVGA/XGA)
(8 ohm output) RGB-DTV INPUT (480p/720p/1080=) / =.,
/
f AUDIO INPUT/
t RS-232C jacks
A/V INPUT /
S-VIDEO/
COMPONENT (480i/480p/720p/1080i)
DVD/DTV INPUT jacks
9
RemoteControlKeyFunctions/Accessories
- When using the remote control aim it at the remote control sensor on the Monitor.
power on button
sleep button
(Refer to p .33)
mute button -_
switches the sound on or off.
number buttons
menu
video/pc button ---
10
pip button
(Refer to p. 26)
input select button
(Refer to p. 27)
ratio button (Refer to p. 44) __,
When pressed displays
A R
apc button --,,
(Refer to p. 34)
system off button
Turns Monitor standby mode off.
No function
menu button
iiiiiiiiiiiiiiii_
Each press of this butt°n changes the mode as
shown below.
enter button
.._=up/down buttons
vol buttons
position button
Y (Refer to p. 27)
freeze button
(Refer to p. 40)
easy sound button (Refer to p. 38)
When pressed displays
D A S P on
screen.
D-sub 15 pin cable
Power cord
Accessories
Owner's Manual Alkaline batteries Remote control
11
Monitor Installation
- It is recommended that this product only be used at an altitude of less than 6562 feet
(2000m) to get the best quality picture and sound.
- This plasma display is designed to be mounted horizontally (wide viewing).
- Your P42W22, P42W22B, P42W22H models (Monitor) can be installed on a wall as
shown below, or on a desktop pedestal as shown on the next page. Wall mount and
stands are optional, and are not supplied with the monitor.
@ Wall MoUnt Installation
\
/ /
\
12
• The monitor can be installed on the wall as shown above.
(For further information, refer to the optional Tilt/Wall Mounting Bracket Installation
and Setup Guide.)
• Speakers are optional, and shown for illustration only.
• Install this monitor only in a location where adequate ventilation is available.
( Wall mount minimum
allowable clearances
for adequate ventilation )
@ DesktOp Pedestal Installation
iiiiiiiiiiiiiiii_
• The Monitor can be mounted on a desk as shown above.
(For further information, refer to the optional Desktop Stand Installation and Setup Guide.)
• Speakers and speaker stands shown are optional, and shown for example only.
b,
II
( Pedestal mount minimum
allowable clearances for
adequate ventilation )
13
VC R Setu p
- As shown below, when connecting the Monitor to a VCR, match the colors of AV input
jacks on the Monitor with the output jacks on the VCR: Video = yellow, Audio (Left) =
white, Audio (Right) = red.
- If you have a mono VCR, connect the audio cable from the VCR to the AUDIO (L/MONO)
input on the Plasma Monitor.
- If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved,
compared to connecting a regular VCR to the Video input.
- Avoid having a fixed image remain on the screen for a long period of time. A frozen still
picture from a VCR (or if a CH label is displayed) displayed on the screen for prolonged
periods will result in an image ghost remaining even when you change the image. Avoid
prolonged display of a still image.
14
S-VIDEO OUT
(R_ AUD D (L_ VIDEO
Back panel of VCR
• To avoid picture noise (interference), leave an adequate distance (20 inches or more)
between the VCR and monitor.
Monitor Connection Panel
To watch VCR
iiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiii'
iiiiiiiiiiiiiiii-
i%iiiii_
!!!!!!!!iiiiiiii_
iiiiiiiiiiiiiiii_
!!!!!!!!iiiiiiiil
iiiiiiiiiiiiiiii_
!i!i!i!i!i!i!i!iiiiiiiiii
iiiiiiiiiiiiiiii_
vlaeo/Dc
@
Use the video/pc button on the remote
control to select VIDEO.
(When connecting S-Video, select the S-
VIDEO option.)
the PLAY button on the VCR. See VCR
Insert a video tape into the VCR and press
owner's manual.
iiiiiiiiiiiiiiiiiiiiiiii_!ii!
15
Cable TV Setup
- After subscribing to a cable TV service from a local provider and installing a converter,
you can watch cable TV programming. This monitor cannot display TV programming
without a TV tuner or cable TV converter box.
Speakers shown
for illustration
only.
Monitor Connection Panel
_ To watch cable TV
Use the video/pc button on the remote
control to select the VIDEO source.
Tune to cable service provided channels
using the cable box.
_P
• For further information regarding cable TV service, contact your local
16
cable TV service provider(s).
Cable Box Connection Panel
video/pc
External AV Source Setup
- As shown below, when connecting the Monitor to an external source, match the colors of AV
input jacks on the Monitor with the output jacks on the audio/video equipment: Video = yel-
low, Audio (Left) = white, Audio (Right) = red.
mmm mmmm mmm m m mm mm
Monitor Connection Panel
,watch external AV source
Use the video/pc button on the monitor's
remote control or INPUT SELECT on the
monitor to select the VIDEO source.
video/pc
m
Camcoraer
Video game sel
DDR
cccc
........iiiiii"
........!!!!!!,,
........iiiiiill
iiiiiiiiiiiiiiii
!!!!!!!!!!!!!!!!
iiiiiiiiiiiiiiii
iiiiiiiiiiiiii,
iiiiiiiiiiiiiill
iiiiiiiiiiiiiiii
!!!!!!!!iiiiiiii
........::::::::
)i)i)i)i)i)i)i)i))))))))_!ii!
Z perate the corresponding external equip-ment. See external equipment operating
guide.
17
Loading...