LG MMBB0301001 User Manual

ENGLISH

LG300

Please read this manual carefully before operating your mobile phone. Retain it for future reference.

USER GUIDE

P/N : MMBB0301001(1.0)

Copyright ©2007 LG Electronics, Inc. All rights reserved. LG and the LG logo are registered trademarks of LG Group and its related entities. All other trademarks are the property of their respective owners.

Important Safety Precautions

Read these instructions. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user guide.

WARNING! Violation of the instructions may cause serious injury or death.

1. Never use an unapproved battery since this could damage the phone and/or battery and could cause the battery to explode.

2. Never place your phone in a microwave oven as it will cause the battery to explode.

3. Never store your phone in temperatures less than

-4°F or greater than 122°F.

4. Do not dispose of your battery by fire or with hazardous or flammable materials.

5. When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If wireless equipment is improperly installed and the air bag is deployed, you may be seriously injured.

6. Do not use a hand-held phone while driving.

7. Do not use the phone in areas where its use is prohibited. (For example: aircraft)

Important Safety Precautions

1. Do not expose the battery charger or adapter to direct sunlight or use it in places with high humidity, such as a bathroom.

2. Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean your phone. This

Important Safety Precautions

could cause a fire.

3. Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards of the phone.

4. Do not use your phone in high explosive areas as the phone may generate sparks.

5. Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if it is loose as it may cause a fire or electric shock.

6. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as it may cause electric shock or fire.

7. Do not handle the phone with wet hands while it is being charged. It may cause an electric shock or seriously damage your phone.

8. Do not disassemble the phone.

1. Do not place or answer calls while charging the phone as it may short-circuit the phone and/or cause electric shock or fire.

2. Do not hold or let the antenna come in contact with your body during a call.

3. Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with the battery. This could cause a fire.

4. Store the battery out of reach of children.

5. Be careful that children do not swallow any parts (such as rubber plugs, earphone, connection parts of the phone, etc.) This could cause asphyxiation or suffocation resulting in serious injury or death.

6. Unplug the power cord and charger during lightning storms to avoid electric shock or fire.

7. Only use the batteries and chargers provided by LG. The warranty will not be applied to products provided by other suppliers.

8. Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty.

9. Your service provider programs one or more emergency phone numbers, such as 911, that you can call under any circumstances, even when your phone is locked. Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues.

Important Safety Precautions

Table of Contents

Important Safety Precautions

Table of Contents 4

Welcome 9

Technical Details 10

FCC Part 15 Class B Compliance 10

Table of Contents

Technical Details 10 FCC RF Exposure Information 12 Bodily Contact During Operation 12 Vehicle-Mounted External Antenna 13 FCC Notice and Cautions 13

Phone Overview 14

Menus Overview 16

Getting Started with Your Phone 18

The Battery 18

Installing the Battery 18

Removing the Battery 18

Charging the Battery 18

Battery Charge Level 19 Turning the Phone On and Off 19

Turning the Phone On 19 Turning the Phone Off 19

Signal Strength 19 Screen Icons 20 Making Calls 20 Correcting Dialing Mistakes 21 Receiving Calls 21

Quick Access to Convenient Features 22

Lock Mode 22 Mute Function 22 Volume Quick Adjustment 22 Call Waiting 22 Caller ID 23 Speed Dialing 23

Dialing Single Digit Speed Dials (from 2 to 9) 23

Dialing Double Digit Speed Dials (from 10 to 99) 23

Entering and Editing Information 24

Text Input 24

Key Functions 24

Contacts in Your Phone’s Memory 25

The Basics of Storing Contacts Entries 25

Phone Numbers With Pauses 25

Storing a Number with Pauses 26 Adding a Pause to an Existing

Number 26

Searching Your Phone’s Memory 27

Scrolling Through Your Contacts 27

Accessing Options 27 Making a Call From Your Phone’s

Memory 28

Messaging 30

1. New Text Message 30

2. New Picture Message 32

3. Inbox 34

4. Sent 35

5. Drafts 37

6. Voicemail 37

7. Templates 38

8. Settings 38

9. Delete All 40

Brew 40

1. Brew Apps 41

2. Brew Info 41

Web 42

1. Start Browser 42

2. Web Messages 44

3. Web Setting 45

3.1 Prompt 45

3.2 Alert Beep 45

Table of Contents

Multimedia 45

1. Take Photo 45

2. Record Voice 46

3. Images 47

4. Audios 47

5. Shuffle 48

Contacts 49

1. New Contact 49

Table of Contents

2. Contact List 50

3. Groups 50

4. Speed Dials 51

5. My Name Card 51

Recent Calls 52

1. Missed Calls 52

2. Received Calls 52

3. Dialed Calls 52

4. All Calls 52

5. Call Timer 53

6. Data Counter 53

Bluetooth

1. Paired Devices 54

2. Power 54

3. Auto Pair Handsfree 55

4. My Visibility 55

5. My Bluetooth Name 55

6. My Bluetooth Info 55

Tools 56

1. Voice Command 56

2. My Menu 56

3. Alarm Clock 57

4. Calendar 57

5. Ez Tip Calc 58

6. Notepad 58

7. Calculator 58

8. World Clock 59

9. Stopwatch 59

0. Unit Converter 60

Settings 60

1. Sound 60

1.1 Ringers 60

1.2 Volume 61

1.3 Message Alerts 61

1.4 Alert Type 61

1.5 Service Alerts 61

1.6 Power On/Off Tone 62

1.7 Flip Tone 62

2. Display 62

2.1 Wallpaper 62

2.2 Banner 63

2.3 Backlight 63

2.4 Menu Style 64

2.5 Languages 64

2.6 Clocks & Calendar 64

2.7 Font Settings 64

3. Security 65

3.1 Lock Phone 65

3.2 Restrictions 66

3.3 Emergency #s 66

3.4 Change Lock Code 66

3.5 Reset Default 67

4. Call Settings 67

4.1 Answer Options 67

4.2 Auto Retry 68

4.3 One-Touch Dial 68

4.4 Voice Privacy 68

4.5 Auto Volume 68

4.6 Airplane Mode 69

4.7 TTY Mode 69

5. USB Setting 69

6. System 70

6.1 Network 70

6.2 Location 71

7. Memory 71

8. Phone Info 71

Safety 72

TIA Safety Information 72

Exposure to Radio Frequency Signal

Antenna Care 72 Phone Operation 73 Tips on Efficient Operation 73

Table of Contents

Driving 73 Electronic Devices 73 Pacemakers 73 Persons with pacemakers: 74 Hearing Aids 74 Other Medical Devices 74 Health Care Facilities 74 Vehicles 75 Posted Facilities 75

Table of Contents

Aircraft 75 Blasting Areas 75 Potentially Explosive Atmosphere 75 For Vehicles Equipped with an Air

Bag 76

Safety Information 76

Charger and Adapter Safety 76 Battery Information and Care 77 Explosion, Shock, and Fire Hazards77 General Notice 78

Warning! Important safety information 79

Avoiding hearing damage 79

Using your phone safely 80 Using headsets safely 81

FDA Consumer Update 81

10 Driver Safety Tips 91

Consumer Information on SAR 95

FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices 98

Accessories 101

Limited Warranty Statement

102

Index 10 6

Some content in this user guide may differ from your phone depending on the phone software. Features and specifications are subject to change without prior notice.

Welcome

Thank you for choosing the LG300 cellular phone designed to operate with the latest digital mobile communication technology, Code Division Multiple Access (CDMA). Along with the many advanced features of the CDMA system, such as greatly enhanced voice clarity, this compact phone offers:

Significantly enhanced voice clarity

Slim and sleek design with internal antenna (Internal antenna described as antenna throughout this user guide).

Large, easy-to-read, 9-line backlit LCD with status icons.

Paging, messaging, voice mail, and caller ID.

23-key keypad.

Speakerphone feature.

Menu-driven interface with prompts for easy operation and configuration.

Any key answer, auto answer, auto retry, one-touch and speed

dialing with 99 memory locations.

Bilingual (English and Spanish) capabilities.

Bluetooth®wireless technology.

Note

The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners.

Important Information

This user’s guide provides important information on the use and operation of your phone. Please read all the information carefully prior to using the phone for the best performance and to prevent any damage to or misuse of the phone. Any unapproved changes or modifications will void your warranty.

Welcome

Technical Details

FCC Part 15 Class B Compliance

This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference

Technical Details

that causes undesired operation.

Technical Details

The LG300 is a trimode phone that operates on both (Code Division Multiple Access CDMA) frequencies: cellular services at 800 MHz and (Personal Communication Services PCS) at

1.9 GHz. CDMA technology uses a feature

called DSSS (Direct Sequence Spread Spectrum) that enables the phone to keep communication

from being crossed and to use one frequency channel by multiple users in the same specific area. This results in a 10-fold capacity increase when compared with analog mode. In addition, features such as soft / softer handoff, hard handoff, and dynamic RF power control technologies combine to reduce call interruptions.

The Cellular and PCS CDMA networks consist of MSO (Mobile Switching Office), BSC (Base Station Controller), BTS (Base Station Transmission System), and MS (Mobile Station).

* TSB-74: Protocol between an

IS-95A system and ANSI JSTD-008

1xRTT system receives twice as many subscribers in the wireless section as IS-95. Its battery life is twice as long as IS-95. High-

speed data transmission is also possible.

The following table lists some major CDMA standards.

CDMA Standard

Basic Air Interface

Network

Service

Performance

Designator

TIA/EIA-95A TSB-74 ANSI J-STD-008 TIA/EIA-IS2000 ANSI TIA/EIA 553A

TIA/EIA/IS-634 TIA/EIA/IS/651 TIA/EIA/IS-41-C TIA/EIA/IS-124

TIA/EIA/IS-96-B TIA/EIA/IS-99 TIA/EIA/IS-637 TIA/EIA/IS-657 IS-801 TIA/EIA/IS-707-A

TIA/EIA/IS-97 TIA/EIA/IS-98 ANSI J-STD-018 ANSI J-STD-019 TIA/EIA/IS-125

Description

CDMA Dual Mode Air Interface

14.4kbps radio link protocol and inter-band operations IS-95 adapted for PCS frequency band cdma2000 1xRTT AirInterface

MAS-BS PCSC-RS Intersystem operations Non-signaling data comm.

Speech CODEC Async Data and Fax Short message service Packet Data Position Determination Service (gpsOne) High Speed Packet Data

Cellular base station Cellular mobile station PCS personal station PCS base station Speech CODEC

Technical Details

FCC RF Exposure Information

WARNING! Read this information before operating the phone.

In August 1996, the Federal Communications Commission (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for

Technical Details

human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards.

Bodily Contact During Operation

This device was tested for typical use with the back of the phone kept 0.79 inches (2.0 cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of

0.79 inches (2.0 cm) must be maintained between the user’s body and the back of the phone, including the antenna, whether extended or retracted. Thirdparty belt-clips, holsters, and similar accessories containing metallic components should not be used. Avoid the use of accessories that cannot maintain

0.79 inches (2.0 cm) distance between the user’s body and the back of the phone and have not been tested for compliance with FCC RF exposure limits.

Vehicle-Mounted External Antenna

(Optional, if available.)

To satisfy FCC RF exposure requirements, keep 8 inches (20 cm) between the user / bystander and vehicle-mounted external antenna. For more information about RF exposure, visit the FCC website at www.fcc.gov.

FCC Notice and Cautions

Any changes or modifications not expressly approved in this user guide could void your warranty for this equipment. Use only the supplied antenna. Use of unauthorized antennas (or modifications to the antenna) could impair call quality, damage the phone, void your warranty and/or violate FCC regulations.

Don't use the phone with a damaged antenna. A damaged antenna could cause a minor skin burn. Contact your local dealer for a replacement antenna.

Technical Details

Phone Overview

1. Earpiece Lets you hear the caller.

2. LCD Screen Displays messages and indicator icons.

When the phone is turned on, Power Save mode automatically dims the screen and then darkens it if no keys are pressed.

3. Left Soft Key Use to access Contacts.

4. Speakerphone Key Use to turn Speaker On or Off.

5. TALK Key Use to place or answer calls.

6. Alphanumeric Keypad Use to enter numbers and

characters and select menu items.

Vibrate Mode Key

from standby mode, press and hold for about 3 seconds. Press and hold for another 3 seconds to activate Normal Mode from Vibrate Only Mode.

8. Navigation Key Use for quick access to Browser,

Multimedia, Brew and My Menu.

9. Right Soft Key Use to access Messaging Menu.

10.

Menu/OK Key

the bottom of the LCD between the Left and Right Soft Key functions.

11. BACK KeyDeletes single space or character with a

quick press. Press and hold to delete entire word. Also lets you exit out of menus, one level at a time.

12. PWR/END Key Use to turn the power on/off and

to end a call. Also returns to the idle display screen.

13.

Lock Mode Key

standby mode; press and hold for about 3 seconds.

Use to set the vibration mode

Selects the function displayed at

Use to lock the phone from

1. Earphone Jack Allows the use of a headset to hear

caller's voice.

2. Side Keys Use to adjust the ringer volume in

standby mode and the earpiece volume during a call.

3. Side Camera Key Use for quick access to Camera

function.

4. Charger Port Connects the phone to the battery

charger or other available accessories.

Charging with PC USB

You can use your computer to charge your phone. Connect one end of a USB cable to the charging accessory port on your phone and the other end to a highpower USB port on your PC (commonly located on the front panel of the computer). When charging with Hub, charge the phone with Hub Power.

Note

To charge the phone with PC USB, USB driver should be installed in advance. LG USB Driver supports Windows 98 SE, ME, 2000, XP and Vista. Drivers can be downloaded from your service provider's website.

5. Camera Lens lets you take pictures.

6. Speaker lets you hear the different ringers and

sounds.

Phone Overview

Menus Overview

Messaging

1. New Text Message

2. New Picture

3. Inbox

4. Sent

5. Drafts

6. Voicemail

7. Templates

8. Settings

Menus Overview

9. Delete All

Brew

1. Brew Apps

2. Brew Info

Message

1. All Messages

2. Text Message

3. Picture Message

4. Edit Voicemail#

1. Delete Inbox

2. Delete Sent

3. Delete Drafts

4. Delete All Messages

Web

1. Start Browser

2. Web Messages

3. Web Settings

Multimedia

1. Take Photo

2. Record Voice

3. Images

4. Audios

5. Shuffle

Contacts

1. New Contact

2. Contact List

3. Groups

4. Speed Dials

5. My Name Card

Recent Calls

1. Missed Calls

2. Received Calls

3. Dialed Calls

4. All Calls

5. Call Timer

1. Last Call

2. Home Calls

3. Roam Calls

4. All Calls

6. Data Counter

1. Received Data

2. Sent Data

3. All Data

Bluetooth

1. Paired Devices

2. Power

3. Auto Pair Handsfree

4. My Visibility

5. My Bluetooth Name

6. My Bluetooth Info

Tools

1. Voice Command

2. My Menu

3. Alarm Clock

4. Calendar

5. Ez Tip Calc

6. Notepad

7. Calculator

8. World Clock

9. Stopwatch

0. Unit Converter

Settings

1. Sound

1. Ringers

2. Volume

3. Message Alerts

4. Alert Type

5. Service Alerts

6. Power On/Off Tone

7. Flip Tone

2. Display

1. Wallpaper

2. Banner

3. Backlight

4. Menu Style

5. Languages

6. Clocks & Calendar

7. Font Settings

3. Security

1. Lock Phone

2. Restrictions

3. Emergency #s

4. Change Lock Code

5. Reset Default

4. Call Settings

1. Answer Options

2. Auto Retry

3. One-Touch Dial

4. Voice Privacy

5. Auto Volume

6. Airplane Mode

7. TTY Mode

5. USB Settings

6. System

7. Memory

1. Reserved Memory

2. Multimedia

8. Phone Info.

Menus Overview

Getting Started with Your Phone

The Battery

Note

It is important to fully charge the battery before initial use of the phone.

Getting Started with Your Phone

The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and standby time. The battery charge level is shown at the top of the LCD screen.

Installing the Battery

Remove the battery cover by sliding it downward with the phone on its side as shown in the picture. Align the battery with the terminals near the top of the battery slot on the back of the phone. Then, slide the battery into its place until it clicks. battery cover then slide it to the right side until it clicks into place.

Removing the Battery

Turn the phone off. Slide the battery cover to left side and remove it. Use the opening near the bottom of the battery to lift the battery out.

Charging the Battery

To use the charger provided with your phone:

Warning! Use only the charger provided with the phone. Using any charger other than the one included with the LG300 may damage your phone or battery.

Notice

Please make sure that the LG logo faces down before inserting a charger, data cable, etc into the charger port of your phone.

1. Plug the end of the adapter into the phone’s charger port and the other end into an electrical outlet.

2. The charge time varies depending upon the battery level.

Battery Charge Level

The battery charge level is shown at the top right of the LCD screen. When the battery charge level becomes low, the low battery sensor alerts you in three ways: sounding an audible tone,

blinking the battery icon, and displaying a warning message. If the battery charge level becomes too low, the phone automatically turns off and any function in progress is not saved.

Turning the Phone On and Off

Turning the Phone On

1. Install a charged battery or connect the phone to an external power source.

2. Press for about 3 seconds until the LCD screen lights up.

Turning the Phone Off

1. Press and hold until the display turns off.

Signal Strength

Call quality depends on the

Getting Started with Your Phone

signal strength in your area. The signal strength is indicated on the screen as the number of bars next to the signal strength icon

-- the more bars, the better

the signal strength. If the signal

Getting Started with Your Phone

quality is poor, move to an open area. If you are in a building, the reception may be better near a window.

Note

The Call quality is also affected by your current location and weather conditions with RF emission changes.

Screen Icons

To see the icon glossary, go to

Settings

Icon Glossary

Making Calls

1. Make sure the phone is turned on. If not, press for about 3 seconds to turn

Phone Info.

on your phone.

the phone on.

2. Enter the phone number (include the area code if needed).

3. Press . lf the phone is locked, enter

the lock code (the last 4 digits of your phone number by default and it's changeable in Settings menu) to unlock the phone on the Unlock menu.

Note

If the phone is restricted, you can only dial phone numbers saved in the Emergency Numbers or your Contact List. To turn off this function:

Settings

Security

Lock Code Restrictions

None

Calls

4. Press to end the call.

Correcting Dialing Mistakes

If you make a mistake while dialing a number, press once to erase the last digit entered, or hold down for at least 2 seconds to go to the standby mode.

Redialing Calls

1. Press twice to redial the last number you dialed. The last 120 numbers (missed, received, dialed) are stored in the Recent Calls list and you can also select any of these to redial.

Receiving Calls

1. When the phone rings or vibrates, press to answer.

Tip

To choose answer options:

Settings

Answer Options

following options:

Flip Open/ Any Key/ Send Key Only/ Auto Answer

Note

If you press or (the side keys), while the phone is ringing, the ringing or vibration is muted for that call.

Call

. Choose from the

2. Press twice to end the call.

Getting Started with Your Phone

Quick Access to Convenient Features

Lock Mode

Sets your phone to require a 4digit password in order to use the phone.

Quick Access to Convenient Features

Note

Until you change it, the default lock code/password is the last 4 digits of your phone number.

To quickly lock your phone, press

for three seconds. To

cancel, press Left Soft Key Unlock, enter the password and press .

Mute Function

The Mute Function is used during a phone call. To quickly activate Mute, press Left Soft Key Mute, then to cancel, press Left Soft Key Unmute.

Volume Quick Adjustment

Use the side keys to adjust the ringer volume while in standby mode, and the earpiece volume during a phone call. The upper key increases the volume and the lower key decreases the volume.

Note

Keypad Volume is adjusted through the Sound Volume menu:

Menu Sound Keypad

Settings -

Volume -

> >

Call Waiting

Your cellular service may offer call waiting. While a call is in progress, two beeps indicate another incoming call. When call waiting is enabled, you may put the active call on hold while you answer the other incoming call. Check with your cellular service provider for information about this function.

1. Press to receive a waiting call.

2. Press again to switch between calls.

Caller ID

Caller ID displays the caller's phone number or name of the incoming call. If the caller’s identity is stored in Contacts, the name will appear along with the phone number. Check with your service provider to ensure they offer this feature.

Speed Dialing

Speed dialing is a convenient feature that allows you to make phone calls quickly. A number key can be assigned to a specific phone number. By pressing and holding down a number key, your phone will recall the phone number associated from the

Contact List and display it briefly while simultaneously dialing that phone number for you. Speed Dial Number 1 is set to Voice Mailbox by default and is unchangeable.

Dialing Single Digit Speed Dials (from 1 to 9)

Press and hold the Speed Dial number.

OR Enter the Speed Dial number

and press .

Dialing Double Digit Speed Dials (from 10 to 99)

Enter the first digit and then press and hold the key of the second digit.

OR Enter the first and second

digits and press .

Quick Access to Convenient Features

Entering and Editing Information

Text Input

You can input and edit your Banner, Calendar, Contacts, Alarm Clock, Notepad, and Messages.

Entering and Editing Information

Key Functions

Left Soft Key: Press to scroll through the following text input modes:

(T9WORD/T9Word/ T9word) -> Abc (ABC/Abc/abc) -> 123 -> Symbols

Shift: Press to change

capitalization

T9 text : T9Word -> T9WORD -> T9word Abc text : Abc -> ABC -> abc

to display other matching words.

Space: Press to insert a space.

Clear: Press to delete a single space or character. Hold to delete the whole message.

Punctuation: In T9 mode, press to insert punctuation.

T9Word

: In T9 mode, press

Contacts in Your Phone’s Memory

The Basics of Storing Contacts Entries

1. From standby mode enter the phone number you want to save (up to 48 digits).

2. Press Left Soft Key

3. Select either Update Existing.

4. Use to highlight a Label and press .

Mobile 1/Home/Work Mobile 2/Fax

Save New or

Note

Use

Update Existing

another phone number to a contact already stored in memory.

5. Enter a name for the phone number (up to 22 characters) and press . A confirmation message is displayed briefly.

Save.

to add

Phone Numbers With Pauses

When you call automated systems, such as voice mail or credit billing numbers, you often have to enter a series of numbers to navigate through the system. Instead of entering these numbers by hand, you can store the numbers in your Contacts separated by special pause characters (W, P). There are two different types of pauses you can use when storing a number:

Wait (W)

The phone stops dialing until you press Left Soft Key

Release

to advance to the next

number.

Pause (P)

The phone waits 2 seconds before sending the next string of digits.

Contacts in Your Phone’s Memory

Storing a Number with Pauses

1. Press

2. Press

3. Press

Contacts in Your Phone’s Memory

4. Enter a name (up to 22 characters) and enter a number with a phone label

Mobile 1/ Home/ Work/

(

Contacts

New Contact

Mobile 2/ Fax

5. Press Right Soft Key

Options

and select

Wait

6. Enter additional number(s) then press .

Pause

Adding a Pause to an Existing Number

1. Press Left Soft Key

Contacts

Contacts alphabetically.

2. Use to highlight the Contact entry to edit, then press .

3. Press Left Soft Key

4. Use to highlight the number.

5. Press Right Soft Key

Options

6. Press

Pause

7. Enter additional number(s), then press .

to display your

Wait

Edit

Searching Your Phone’s Memory

The LG300 phone is able to perform a dynamic search of the contents in your phone’s memory. A dynamic search compares entered letters or numbers against the entries in your Contacts. The cursor is automatically moved to the matching entry. You can then select a number from the list to call or edit.

Scrolling Through Your Contacts

1. Press Left Soft Key

Contacts

Contacts alphabetically.

2. Use to scroll through the list.

to display your

Searching by Letter

1. Press Left Soft Key

Contacts

to display your

Contacts alphabetically.

2. Press (or press repeatedly) the key on the keypad that corresponds with the search letter.

Accessing Options

1. Press Left Soft Key

Contacts

2. Select a contact entry.

3. Press Right Soft Key

Options

4. Select an option (use then press , or press the corresponding number on the keypad):

Send Message

message or picture

: Send a text

Contacts in Your Phone’s Memory

message to the selected contact.

Delete

: Delete the selected

entry in your Contacts.

Edit

: Edit the selected

contact information.

Delete Multiple

from

Selective/All

delete multiple entries at one time.

Send via Bluetooth

a contact(vCard) via

Bluetooth Bluetooth

a notice pops up to turn

Bluetooth

: Choose

: Send

. In case

power is not on,

on.

Set Speed Dial/ Remove Speed Dial

dial or remove the speed dial.

: Set a speed

Making a Call From Your Phone’s Memory

Once you have stored phone numbers in your Contacts, you can place calls to those numbers quickly and easily.

By searching for a phone number in Contacts or Recent Calls, highlighting it and then pressing .

By using Speed Dialing.

From Contacts

1. Press Left Soft Key

Contacts

to display your

Contacts.

2. Use to highlight the Contact entry, then press .

3. Use to highlight the phone number.

4. Press to place the call.

+ 196 hidden pages