LG Electronics MFL68001401 User Manual
OWNER’S MANUAL
Canvas Speaker
Please read the safety information carefully before using the product.
OCF100
*MFL68001401*
P/NO : MFL68001401 (1311-REV00) www.lg.com
ACCESSORIES
VESA Guide Paper
Guide Spacer (Top)
2 EA
Safety Clip (Top)
2 EA
Wall Mounting Anchor
8 EA
Installation Guide Tape
4 EA
Guide Spacer (Bottom)
2 EA
Safety Clip (Bottom)
2 EA
Wall Mounting Screw
8 EA
Owner's Manual Optical Cable
Guide Spacer (Top)
Fixing Screw
2 EA (M6 X L26)
Safety Clip Fixing Screw
(Top/Bottom)
4 EA (M4 x 12)
Rubber
2 EA (Thickness: 12 mm)
Guide Spacer (Bottom)
Fixing Screw
2 EA (M4 X L20)
Protection Cushion (Upper)
2 EA (Thickness: 11 mm)
Protection Cushion (Bottom)
2 EA (Thickness: 1.5 mm)
2
SAFETY PRECAUTIONS
- If you are a professional installer, please read this manual carefully before installing the product.
- After installing the product according to the manual, ensure that the user also reads the manual carefully.
After reading the manual, please keep it handy for future reference.
Warning
ENGLISH
The product should be installed by a qualified professional
specified by the retail store.
Product installation by non-qualified personnel is very dangerous and may
cause personal injury.
When moving or replacing the product after installation,
contact a qualified installer specified by the retail store.
Installation or movement of the product must be carried out by a skilled
professional. If an unqualified person moves and installs the product, it may
cause safety risks.
Follow the instructions in the manual to properly install this
product.
If you do not follow the instructions, the product may be installed incorrectly
and cause serious injury or damage to the product.
When installing the product, first check that the wall is
strong enough and use the anchors and screws provided.
Otherwise, they may not bear the weight of the product, which could cause a
safety hazard.
The product should be installed where its weight can be fully
supported.
If the product is installed on a weak surface, the product may fall, causing
injury.
Be sure not to hang the power cable and signal cable on the
back of TV when installing the wall-mounted TV.
Damaged cables may result in fire, electric shock, or damage to the product.
Do not hang on this product or apply any shock to it.
The product may fall and cause injury.
Caution
To install or adjust the height of the product, two or more
people are needed.
If you try to install or move the product alone, it may fall, causing injury or
damage to the product.
When drilling holes into the wall, make sure you use a drill
and drill bit with the specified diameter. Ensure that you also
follow the instructions regarding the depth of the holes.
Otherwise, the product may be installed incorrectly and cause safety issues.
Do not clean the product with wet towels and do not place a
heater or humidifier underneath it.
Moisture, steam, or heat permeating into the product may result in fire,
electric shock, or product damage.
Make sure that the power cord is removed from the outlet
before installing the product.
Otherwise, it may cause an electric shock or fire.
Be sure to use the accessory cable provided. Otherwise, it
may cause damage to the connector from friction between
the product and the wall.
Keep this product away from sprinklers, sensors, hightension wires, and power sources. Do not install it in a
location where vibrations or impact shocks are likely to
occur.
Wear safety gloves when installing the product. Do not use
your bare hands.
Otherwise, it may cause personal injury.
3
Before Installation
* Do not use this product for purposes other than to attach the TV to the wall.
* Be careful when installing and using the wall-mounted TV to prevent product damage and safety hazards.
* If the instructions in the manual are unclear, stop the installation and contact the service center. If you are still having problems understanding
the instructions after contacting the service center, seek a professional to install the product for you.
* An individual with experience in mechanical and architectural fields may not have any difficulty understanding this manual or installing the
product, even if they are not a professional.
* This product is designed to be mounted onto walls with a standard amount of space between the studs. LG Electronics is not responsible for
any issues resulting from the product being mounted on walls that do not have the appropriate amount of space.
* Install the wall mounting screws to the wall in the center of the studs at both ends. It is recommended to use the stud finder, which is optional
and not included with this product.
* When installing the bracket on a concrete wall, or on any other walls capable of holding the strength specified in the manual, you may remove
the brackets for mounting the product onto the wall with studs that have the standard amount of space and then follow the instructions for
attaching the brackets to make the installation easier.
* Only install the bracket on vertical walls. Do not install the bracket on an angled wall or on the ceiling. LG Electronics is not liable for problems
that occur as a result of installing the product on a slanted wall or on the ceiling.
* Check that the accessories provided with the product are all included before installing. LG Electronics is not liable for any damage or loss of
the accessories after the package has been opened.
* Make sure that the accessories are kept out of the reach of children to prevent safety hazards, such as choking from swallowing any small
parts.
* Make sure that the screws are tight. Applying excessive force to screws may damage to the wall, affect the product performance, or cause it
to become damaged.
* Make sure that the installed TV does not exceed the specified tension load and that no external force is applied to it.
* In order to prevent any accidents, take care when handling tools during the installation.
Tools for Installation
Philips screwdriver, 8 mm spanner, drill, and Ф 8 mm drill bit for concrete walls, Ф 4 mm drill bit for wood or steel, level, stud finder, and slotted
screwdriver.
Installation
Attaching the Guide Spacer to the TV
1
- If the screws are not fully tightened when you fix the guide spacers, check the length of the screws and refer to the technical service
manual.
Guide Spacer (Top) Fixing Screw
Guide Spacer (Top)
Guide Spacer (Bottom) Fixing Screw
Guide Spacer (Bottom)
How to attach the Guide Spacers
1. Remove any screws that have been installed into the mounting holes.
2. Fix the guide spacers and the guide spacer screws in order as illustrated.
- Place the TV on a table with the screen facing down. Make sure that you place it on a flat surface covered with a soft cloth or cushion to
protect it from scratches.
- Tighten the screw until the TV, the guide spacers, and the screws are attached securely.
- Use a Philips screwdriver (manual or drill) to tighten the screws.
4
Attaching the Protective Cushion
2
- Attach the protective cushion to minimize the impact between the TV and the canvas speaker in case they bump against each
other when adjusting the angle. Attach the protective cushion to the back corners of the TV as shown in the illustration.
- The thickness of upper cushion (2 EA) is
11 mm, and the bottom cushion (2 EA) is 1.5 mm.
Protection Cushion (Upper), 2 EA (Thickness: 11 mm)
ENGLISH
Protection Cushion (Bottom), 2 EA (Thickness: 1.5 mm)
Marking the Screw Fixing Spots on the Wall Using the VESA Guide
3
Paper
1430 mm
840 mm
(VESA guide sheet size)
1. Check the VESA standard for the TV.
2. Mark the wall mounting location using the VESA guide paper provided.
3. Remove the VESA guide sheet after marking the wall mounting location.
865 mm
(Actual product size)
* Please note that the VESA guide sheet is shorter than the actual product by 12.4 mm at the top and bottom, respectively.
5
Loading...