LG MA-1303xx INSTALLATION INSTRUCTIONS
A. GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event
of an electrical short circuit, grounding reduces the
risk of electric shock by providing an escape wire
for the electric current. This appliance is equipped
with a cord having a grounding wire with a
grounding plug. The plug must be plugged into an
outlet that is properly installed and grounded.
WARNING
Improper grounding can result in a risk of electric
shock. Consult a qualified electrician if the
grounding instructions are not completely
understood, or if doubt exists as to whether the
appliance is properly grounded, and either:
1. If it is necessary to use an extension cord, use
only a 3-wire extension cord that has a 3-blade
grounding plug, and a 3-slot receptacle that will
accept the plug on the appliance. The marked
rating of the extension cord shall be equal to or
greater than the electrical rating of the
appliance, or
2. Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or serviceman install an outlet near
the appliance.
NOTE:
1. A short power-supply cord is provided to reduce
the risks resulting from becoming entangled in
or tripping over a longer cord.
2. Longer cord sets or extension cords are
available and may be used if care is exercised
in their use.
3. If a long cord or extension cord is used, (1) the
marked electrical rating of the cord set or
extension cord should be at least as great as
the electrical rating of the appliance, (2) the
extension cord must be a grounding-type 3-wire
cord, and (3) the longer cord should be
arranged so that it will not drape over the
countertop or tabletop where it can be pulled on
by children or tripped over accidentally.
B. CIRCUITS
For safety purposes this oven must be plugged
into a 15 or 20 Amp circuit. No other electrical
appliances or lighting circuits should be on this
line. If in doubt, consult a licensed electrician.
C. VOLTAGE WARNING
The voltage used at the wall receptacle must be
the same as specified on the oven name plate
located on the back or on the side of the control
panel of the oven. Use of a higher voltage is
dangerous and may result in a fire or other type of
accident causing oven damage. Low voltage will
cause slow cooking. In case your microwave oven
does not perform normally in spite of proper
voltage, remove and reinsert the plug.
D. DO NOT BLOCK AIR VENTS
All air vents should be kept clear during cooking.
If air vents are covered during oven operation the
oven may overheat. In this case, a sensitive
thermal safety device automatically turns the oven
off. The oven will be inoperable until it has cooled
sufficiently.
E. RADIO INTERFERENCE
1. Microwave oven operation may interfere with
TV or radio reception.
2. When there is interference, it may be reduced
or eliminated by taking the following measures:
a. Clean the door and the sealing surfaces of
the oven.
b. Reorient the receiving antenna of radio or
television.
c. Relocate the microwave oven in relation to
the TV or radio.
d. Move the microwave oven away from the
receiver.
e. Plug the microwave oven into a different
outlet so that microwave oven and receiver
are on different branch circuits.
5
INSTALLATION
Ensure proper ground
exists before use
Loading...