Table of Contents
Installation |
Safety Precautions |
||||
Accessories |
|||||
and |
|||||
Before connecting to the PC |
|||||
Connection |
|||||
Name and Function of the Parts |
|||||
|
|||||
|
Connecting to External Devices |
||||
|
|
|
Connecting to your PC |
||
|
|
|
|
|
|
|
|
|
Connecting to VCR/DVD |
||
|
|
|
|
|
|
|
|
|
Connecting to DVD/SET -TOP BOX |
||
|
|
|
|
|
|
|
|
|
When Watching TV |
||
|
To arrange cables using cable holder |
||||
Input |
Adjusting the Screen |
||||
|
|
Name of the Buttons in the screen Adjustment Unit |
|||
Selection |
|
|
|
|
|
|
|
OSD (On Screen Display) Menu |
|||
and Tracking |
|
|
OSD (On Screen Display) Screen Tracking Order |
||
|
|
|
|
||
|
|
STATION ID set/Select the channel when using the TV |
|||
|
|
|
|||
|
|
|
PICTURE ID to adjust the picture function (TV/Video) |
||
|
|
|
PICTURE ID to adjust the picture function (RGB-DTV, RGB-PC) |
||
|
|
|
SOUND ID to adjust the sound function |
||
|
|
|
TIME ID to adjust the time function |
||
|
|
|
SPECIAL ID to aelect the special function |
||
|
|
|
SCREEN ID to adjust the screen function (RGB-PC, RGB-DTV Only) |
Miscellaneous Troubleshooting
Specifications
A1
A4
A5
A7
A13
A13
A15
A17
A18
A19
A20
A20
A22
A23
A24
A27
A28
A29
A30
A31
A32
A33
A36
<![endif]>ENGLISH
i
Please read these safety precautions carefully before using the product.
Warning If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
Caution If you ignore the caution message, you may be slightly injured or the product may be damaged
Warning
Keep away from heat sources like electrical heaters.
- Electrical shock, fire, malfunction or deformation may occur.
Keep the packing anti-moisture material or vinyl packing out of the reach of children.
-Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
Do not put heavy objects on the product or sit upon it.
- If the product collapses or is dropped, you may be injured. Children must pay particular attention.
Do not leave the power or signal cable unattended on the pathway.
- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.
Install the product in a neat and dry place.
- Dust or moisture can cause electrical shock, fire or product damage.
If you smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center.
- If you continue to use without taking proper measures, electrical shock or fire can occur.
If you dropped the product or the case is broken, turn off the product and unplug the power cord.
-If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention.
-Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service center.
Caution
Make sure the product ventilation hole is not blocked. Install the product in a suitably wide place (more than 10cm from the wall)
- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
Do not block the ventilation hole of the product by a tablecloth or curtain.
- The product can be deformed or fire can break out due to overheating inside the product.
Install the product on a flat and stable place that has no risk of dropping the product.
- If the product is dropped, you may be injured or the product may be broken.
Install the product where no EMI occurs.
Keep the product away from direct sunlight.
- The product can be damaged.
A1
Warning
Make sure to connect the power cable to the grounded current.
- You may be electrocuted or injured.
Use the rated voltage only.
- The product can be damaged, or you may be electrocuted.
During a thunder or lightning storm, unplug the power cable or signal cable.
- You may be electrocuted or a fire can break out.
Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a power bar with a grounding terminal designed for exclusive use with the computer.
- A fire can break out due to overheating.
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
If you don’t intend to use the product for a long time, unplug the power cable from the product.
- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
Fix the power cable completely.
- If the power cable is not fixed completely, a fire can break out.
Hold the plug when pulling out the power cable. Do not bend the power cord with excessive force or put heavy objects on the power cord.
- The power line can be damaged, which may cause electric shock or fire.
Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.
- You may be electrocuted.
The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation.
Caution
Do not unplug the power cord while the product is in use.
- Electrical shock can damage the product.
Warning
Make sure to turn off the product.
- You may be electrocuted or the product can be damaged.
Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged.
<![endif]>ENGLISH
A2
Safety Precautions
Caution
Do not shock the product when moving it.
- You may be electrocuted or the product can be damaged.
Do not dispose the product-packing box. Use it when you move.
Make the panel face forward and hold it with both hands to move.
-If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center for repair.
Warning
Do not disassemble, repair or modify the product at your own discretion.
-Fire or electric shock accident can occur.
-Contact the service center for check, calibration or repair.
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent scratching. Do not clean with a wet cloth.
Keep the product away from water.
- Fire or electric shock accident can occur.
Caution
Do not put or store inflammable substances near the product.
- There is a danger of explosion or fire due to careless handling of the inflammable substances.
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent scratching. Do not clean with a wet cloth.
- The water can sink into the product, which can cause electric shock or serious malfunction.
Take a rest from time to time to protect your vision.
Keep the product clean at all times.
Take a comfortable and natural position when working with a product to relax the muscles.
Take a regular break when working with a product for a long time.
Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.
Keep the proper distance from the product.
- Your vision may be impaired if you look at the product too closely.
Set the appropriate resolution and clock by referring to the User’s Guide.
- Your vision can be impaired.
Use authorized detergent only when cleaning the product. (Do not use benzene, thinner or alcohol.)
- Product can be deformed.
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
A3
Make sure the following items are included with your product.
The product and the accessories can be different from the figures shown below.
<![endif]>ENGLISH
Remote Control/Batteries |
CD-ROM/Cards |
D-Sub Signal Cable |
Power Cord |
Audio Cable (PC) |
Stand base |
Inserting batteries into remote control.
1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap.
• You can use a remote control 7 meter distance and 30 degree (left/right) within the receiving unit scope.
• Dispose of used batteries in the recycle bin to prevent environmental pollution.
A4
Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off.
1.
2.
3.
Put the product with the front side facing downward on a soft cloth.
Align the hooks on the stand base with the matching slots in the base of the product.
Insert and push the hooks into slots.
Hook
Slot
1.
2.
Put the product with the front side facing downward on a soft cloth.
To remove the stand base, hold the bottom of the stand with one hand and pull the base bottom latch with the other hand, as shown in the figure.
Bottom Latch
Important
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.
A5
Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off.
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range :-3˚~25˚ |
Swivel :345˚ |
<![endif]>ENGLISH
A6
Remote Control
MUTE POWER
TV INPUT I/II
LIST Q.VIEW MENU
PR
OK
VOL VOL
PR
SSM PSM
MUTE
POWER
TV : TV button
INPUT
Input |
|
Each time you press the INPUT |
||||||
TV |
|
button it will change to |
||||||
|
TV |
|
|
AV |
|
RGB-DTV |
||
AV |
|
|
|
|
||||
|
|
|
|
|
RGB-PC. |
|
||
RGB-DTV |
|
|
|
|
|
|
||
|
If nothing is inputted for several |
|||||||
RGB-PC |
|
seconds the screen will |
||||||
|
|
automatically move to the selected |
||||||
|
|
menu. |
|
|
|
|||
MENU |
OK |
|
|
|
||||
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
I/II : Bilingual choice and sound mode selection
Press this button
[TV]
to switch from Stereo to Mono sound in case of stereo transmission, or from Nicam Stereo to Nicam Mono, in case of digital transmission.
to switch from Nicam Dual I to Nicam Dual II or Nicam Dual I+II in case of Nicam Dual transmission.
to choose between Dual I, Dual II or Dual I+II in case of bilingual transmission :
Dual I sends the primary broadcast language to the loudspeakers ;
Dual II sends the secondary broadcast language to the loudspeakers ;
Dual I+II sends a separate language to each loudspeakers.
[AV]
In AV mode, you can select output sound for the left and right loudspeakers. Repeatedly press the I/II button to select the sound output.
L+R : Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loud-speaker.
L+L : Audio signal from audio L input is sent to left and right loud-speakers.
R+R : Audio signal from audio R input is sent to left and right loud-speakers.
NOTE : In case of weak stereo sound signals, with stereo or Nicam stereo transmission, select mono reception.
A7
MUTE |
|
POWER |
TV |
INPUT |
I/II |
LIST |
Q.VIEW |
MENU |
|
PR |
|
|
OK |
|
VOL |
|
VOL |
|
PR |
|
SSM |
|
PSM |
SLEEP |
|
TEXT |
UPDATE |
|
TIME |
X |
|
|
SIZE |
|
MIX |
LIST : Programme list
To display the programme list (0~ 99).
0 |
- - - - - |
5 |
- - - - - |
1 |
- - - - - |
6 |
- - - - - |
2 |
- - - - - |
7 |
- - - - - |
3 |
- - - - - |
8 |
- - - - - |
4 |
- - - - - |
9 |
- - - - - |
MENU
OK
Note: TV channels displayed in blue have been setup to be skipped in the Programme Edit menu.
Q.VIEW : QUICK VIEW Button
To display the previously seleted TV channel
MENU
Use this button to enter the On Screen Display menu.
PR ( ) Buttons
Able to change channel.
VOL ( ) Buttons
Able to adjust sound.
OK Button
Use when functional adjustment is completed.
Number buttons
Able to directly select and change channel.
SSM (Sound Status Memory) Button
Use this button to select the sound tone.
Press repeatedly to select Flat, Music, Movie, Speech, User sound tone.
PSM (Picture Status Memory) Button
Press repeatedly to select Dynamic, Standard, Mild, Game or User picture mode.
SLEEP : SLEEP Timer
You can set a time period after which the
TV / AV / S-Video should switch itself to standby. Press the key repeatedly to select the number of minutes.
---(Off) |
10 |
20 |
30 |
60 |
240 |
180 |
120 |
90 |
A8 |
|
|
|
<![endif]>ENGLISH
Name and Function of the Parts
Name of the Remote Control Buttons
Remote Control - Using the Teletext function
LIST Q.VIEW MENU
PR
OK
VOL VOL
PR
SSM |
PSM |
SLEEP |
TEXT |
UPDATE |
TIME |
X |
|
SIZE |
MIX |
HOLD |
REVEAL |
|
? |
INDEX |
MODE |
i |
M |
TEXT
To select the teletext on or off. The main index page or the last selected page appears on the screen together with an information headline and an option line at the bottom of the screen.
TIME
Press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN, or NUMBER buttons. Press again to exit this function.
MIX
Display the teletext pages superimposed on the TV picture. To switch the TV picture off press this button again.
REVEAL
Press the button to reveal/conceal the hidden information, such as solutions to riddles and puzzles. Press this button again to remove the information from the display.
MODE
The mode will be switched in the Teletext mode.
Yellow key
Favourite Program On : Rotate favourite channel
A9
Remote Control - Using the Teletext function
SSM PSM
SLEEP TEXT
UPDATE TIME
X
SIZE |
MIX |
HOLD REVEAL
?
INDEX MODE
i |
M |
UPDATE
Press the button to appear the TV programme. At the top of screen indicates that you are still in the teletext mode. Before interrupting teletext, you may select a page number. When the page has been found, the information line appears briefly on your screen. Press the button again to reappear teletext.
SIZE
Press the button repeatedly to display the upper part, the lower part and then to return to the normal page size.
HOLD
Press the button to stop the automatically rotating of the subpages. Press the button again to continue the automatic rotating again.
INDEX
To display the main index.
<![endif]>ENGLISH
A10
Name and Function of the Parts
|
RGB(PC/DTV) |
ANTENNA |
|
|
|
||
|
|
|
Audio |
Video |
[MONO] |
Audio |
H/P |
|
AV IN |
|
S-Video |
Power Connector : Connect the power cord.
AV Input Terminal
D-Sub Analog Signal Connector
TV Tuner Jack : Connect the antenna.
PC Sound Jack : Connect to the jack in the PC sound card.
Headphone/Earphone Connection Terminal
A11