LG LY33, LY34, LW33, LY54, LY33 series Owner's Manual

www.lg.com

LY33**
LY34**
LY54**
LW33**

Please read this manual carefully before operating your TV
and retain it for future reference.

*Disclaimer

LG LED TV applies LCD screen with LED backlights.

OWNER’S MANUAL

LED TV

2

ENG

ENGLISH

TABLE OF CONTENTS

TABLE OF CONTENTS

WARNING

yIf you ignore the warning message, you

may be seriously injured or there is a
possibility of accident or death.

CAUTION

yIf you ignore the caution message, you

may be slightly injured or the product
may be damaged.

NOTE

yThe note helps you understand and use

the product safely. Please read the note
carefully before using the product.

3 LICENSES

3 OPEN SOURCE SOFTWARE

NOTICE INFORMATION

4 ASSEMBLING AND PREPARING

4 Unpacking
6 Separate Purchase
7 Parts and Button
8 - Using the Joystick button
9 Lifting and Moving the TV
10 Setting up the TV
10 - Attaching the stand
13 Mounting on a table
16 Mounting on a wall
18 Tidying cables

19 MAKING CONNECTIONS

19 Antenna Connection
20 Adapter Connection
20 Network Setup
20 - Wired network connection
21 Speaker Output Setup
22 Other Connections

30 REMOTE CONTROL

33 MAINTENANCE

33 Cleaning your TV
33 - Screen, frame, cabinet and stand
33 - Power cord

34 TROUBLESHOOTING

35 SPECIFICATIONS

41 IR CODES

42 EXTERNAL CONTROL DEVICE

SETUP

42 RS-232C Setup
42 Type of Connector:

D-Sub 9-Pin Male
43 RS-232C Configurations
44 Communication Parameters
44 Command Reference List
45 Transmission / Receiving Protocol

3

ENGENGLISH

LICENSES / OPEN SOURCE SOFTWARE NOTICE INFORMATION

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.

This DivX Certified® device has passed rigorous testing to ensure it plays
DivX® video.

To play purchased DivX movies, first register your device at vod.divx.com.
Find your registration code in the DivX VOD section of your device setup
menu.

DivX Certified® to play DivX® video up to HD 1080p, including premium
content.

DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC
and are used under license.

Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and others
available at [www.divx.com/patents].

OPEN SOURCE SOFTWARE NOTICE INFORMATION

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained
in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping, and handling) upon email request
to [e-mail]. This offer is valid for three (3) years from the date on which you purchased
the product.

4

ENG

ENGLISH

ASSEMBLING AND PREPARING

NOTE

yImage shown may differ from your TV.
yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yThe available menus and options may differ from the input source or product model that you

are using.

yNew features may be added to this TV in the future.
yThe TV can be placed in standby mode in order to reduce the power consumption. And the

TV should be turned off if it will not be watched for some time, as this will reduce energy

consumption.

yThe energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.

CAUTION

yDo not use any unapproved items to ensure the safety and product life span.
yAny damages or injuries by using unapproved items are not covered by the manufacturer’s

warranty.

ySome models have a thin film attached on to the screen and this must not be removed.

NOTE

yThe items supplied with your product may vary depending on the model.
yProduct specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions.

yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not fit into your TV’s USB port.

A

B

A

B

*A

<

=

10 mm

*B

<

=

18 mm

yUse a certified cable with the HDMI logo attached.
yIf you do not use a certified HDMI cable, the screen may not display or a connection error may

occur. (Recommended HDMI Cable Types)

- High-Speed HDMI®/TM Cable

- High-Speed HDMI®/TM Cable with Ethernet

5

ENGENGLISH

ASSEMBLING AND PREPARING

Remote control,
batteries (AAA)

(See p.30, 31, 32)

Owner’s manual Cable Holder

(Depending on model)

Power cord

(Depending on model)

Stand Screws
4EA, M4 x L14
(Only 42/47/55/60LY34**,
42/47/55/60LY540*,
42/47/55LY541*)
(See p.10, 12)

Stand Screws

4EA, M4 x L20
(Only 32LY34**, 32LY540*,
42/47/55LY541*

)
6EA, M4 x L20
(Only

32LY541*

)

(See p.10, 11, 12)

Cable Managements

2EA
(Only LY34**, LY540*)
(See p.18)

Wall Mount Spacers

2EA
(

Only 42LY34**, 42LY54**)

(See p.17)

Stand Bases

(Only LY34**, LY540*)
(See p.10)

or

Stand Base

(Only LY33**, LW33**)
(Depending on model & country)
(See p.10)

AC-DC Adaptor

(Only LY33**, LW33**)
(Depending on model &
country)
(See p.20)

6

ENG

ENGLISH

ASSEMBLING AND PREPARING

Stand Base/Stand Body

(Only LY541*)
(See p.11, 12)

Power Cord Holder/Screw

1EA
(Only 42/47/55LY541*)
(See p.18)

Torx Plus Star-Head
Screws

2EA
(Only LY541*)
(See p.11, 12)

Rubbers

2EA
(Only LY541*)
(See p.13)

Washers for Stand Fixing

2EA
(Depending on model)
(See p.15)

Nuts for Stand Fixing

2EA
(Depending on model)
(See p.15)

Screws for Stand Fixing

2EA
(Depending on model)
(See p.15)

Separate Purchase

Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.

LG Audio Device

7

ENGENGLISH

ASSEMBLING AND PREPARING

Parts and Button

NOTE

yYou can set the power indicator light to on or off by selecting OPTION in the main menus.

A type : LY34**, LY540* B type : 22/28LY33** (Except for India)

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 Joystick Button - This button is located below the TV screen.

C type : 22/28LY33** (Only India), 24LW33**

D type : LY541*

Remote control sensor

Power Indicator

Screen

Speakers

Joystick button

2

Remote Control Sensor

Power Indicator

Screen

Speakers

Joystick Button

2

Remote control and

intelligent sensors

1

(Only LY540H)

Power Indicator

Screen

Speakers

Joystick button

2

Screen

Speakers

Remote control and

intelligent sensors

1

Power Indicator

Joystick button

2

8

ENG

ENGLISH

ASSEMBLING AND PREPARING

Using the Joystick button

You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right.

Basic Functions

Power On

When the TV is turned off, place your finger on the joystick
button and press it once and release it.

Power Off

When the TV is turned on, place your finger on the joystick
button and press it once for a few seconds and release it.
(However, if the Menu button is on the screen, pressing and
holding the joystick button will let you exit the Menu.)

Volume
Control

If you place your finger over the joystick button and move it left
or right, you can adjust the volume level you want.

Programmes
Control

If you place your finger over the joystick button and move it up
or down, you can scrolls through the saved programmes you
want.

NOTE

yWhen your finger over the joystick button and push it to the up, down, left or right, be careful

not to press the joystick button. If you press the joystick button first, you may not be able to
adjust the volume level and saved programmes.

Adjusting the Menu

When the TV is turned on, press the joystick button one time.

You can adjust the Menu items ( , , , ) moving the joystick button up, down, left or right.

TV off Turns the power off.

Settings Accesses the main menu.

Close Clears on-screen displays and returns to TV viewing.

Input List Changes the input source.

9

ENGENGLISH

ASSEMBLING AND PREPARING

Lifting and Moving the TV

When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless
of its type and size.

CAUTION

yAvoid touching the screen at all times, as

this may result in damage to the screen.

yIt is recommended to move the TV in the

box or packing material that the TV originally
came in.

yBefore moving or lifting the TV, disconnect

the power cord and all cables.

yWhen holding the TV, the screen should face

away from you to avoid damage.

yHold the top and bottom of the TV frame

rmly. Make sure not to hold the transparent

part, speaker, or speaker grill area.

yWhen transporting a large TV, there should

be at least 2 people.

yWhen transporting the TV by hand, hold the

TV as shown in the following illustration.

yWhen transporting the TV, do not expose the

TV to jolts or excessive vibration.

yWhen transporting the TV, keep the TV

upright, never turn the TV on its side or tilt
towards the left or right.

yDo not apply excessive pressure to cause

exing /bending of frame chassis as it may

damage screen.

CAUTION

yWhen handling the TV, be careful not to

damage the protruding joystick button.
(Depending on model)

10

ENG

ENGLISH

ASSEMBLING AND PREPARING

1

2

(Only 22/28LY33**, 24LW33**)

Stand Base

(Only LY34**, LY540*)

1

A Stand Base

B Stand Base

1

2

Setting up the TV

Image shown may differ from your TV.

Attaching the stand

2

4EA

M4 x L14
(Only
42/47/55/60LY34**,
42/47/55/60LY540*)

M4 x L20
(Only 32LY34**,
32LY540*)

11

ENGENGLISH

ASSEMBLING AND PREPARING

1

2

3

(Only 32LY541*)

Stand Body

Stand Base

4 EA
M4 x L20

M4 x L20
2EA

or

wyv{lj{pvuGjv}ly

Torx Plus Star-Head Screws
2EA

Tighten the two Torx head screws
(supplied with TV) with a Torx Bit Driver
(not supplied with TV).

12

ENG

ENGLISH

ASSEMBLING AND PREPARING

1

2

3

(Only 42/47/55LY541*)

Stand Body

Stand Base

4 EA
M4 x L20

M4 x L14
4EA

or

M4 x L14
2EA

wyv{lj{pvuGjv}ly

Torx Plus Star-Head Screws
2EA

Tighten the two of these four screws
and the two Torx screws (supplied with
TV) to secure the TV. Tighten the two
Torx screws with a Torx Bit Driver (not
supplied with TV).

13

ENGENGLISH

ASSEMBLING AND PREPARING

CAUTION

yWhen attaching the stand to the TV

set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.

yMake sure that the screws are fastened

completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.) Do not use too
much force and over tighten the screws;
otherwise screw may be damaged and
not tighten correctly.

NOTE

yRemove the stand before installing the

TV on a wall mount by performing the
stand attachment in reverse.

yThe Rubber will protect the opening

from accumulating dust and dirt. When
installing the wall mounting bracket, use
the Rubber. (Only LY541*)

Rubber

2EA

Mounting on a table

1 Lift and tilt the TV into its upright position on

a table.

- Leave a 10 cm (minimum) space from
the wall for proper ventilation.

10 cm

10 cm

10 cm

10 cm

2 Connect the power cord to a wall outlet.

CAUTION

yDo not place the TV near or on sources

of heat, as this may result in fire or other
damage.

WARNING

yIf a television is not positioned in a

sufficiently stable location, it can be
potentially hazardous due to falling. Many
injuries, particularly to children, can be
avoided by taking simple precautions
such as:

»Using cabinets or stands

recommended by the manufacturer
of the television.

»Only using furniture that can safely

support the television.

»Ensuring the television is not

overhanging the edge of the
supporting furniture.

»Not placing the television on tall

furniture (for example, cupboards or
bookcases) without anchoring both
the furniture and the television to a
suitable support.

»Not standing the televisions on cloth

or other materials placed between
the television and supporting
furniture.

»Educating children about the dangers

of climbing on furniture to reach the
television or its controls.

14

ENG

ENGLISH

ASSEMBLING AND PREPARING

Adjusting the angle of the TV to suit view

(Only LY541*)

Swivel 20 degrees to the left or right and adjust
the angle of the TV to suit your view.

20˚20˚

CAUTION

yWhen adjusting the angle of the product,

watch out for your fingers.

»Personal injury may occur if hands

or fingers are pinched. If the product
is tilted too much, it may fall, causing
damage or injury.

Attaching the TV to a desk

(Depending on model)

The TV should be attached to a desk so
it cannot be pulled in a forward/backward
direction, potentially causing injury or damaging
the product.

A type )

4-Screws

(Not supplied with TV)

Desk

Stand

NOTE

yScrew : M5 x L (*L: Table depth + 8~10

mm)
ex) Table depth: 15 mm, Screw: M5 x L25

15

ENGENGLISH

ASSEMBLING AND PREPARING

Securing the TV to a wall

(This feature is not available for all models.)

1 Insert and tighten the eye-bolts, or TV

brackets and bolts on the back of the TV.

- If there are bolts inserted at the eye­bolts position, remove the bolts first.

2 Mount the wall brackets with the bolts to the

wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets

tightly with a sturdy rope.
Make sure to keep the rope horizontal with

the at surface.

CAUTION

yMake sure that children do not climb on

or hang on the TV.

NOTE

yUse a platform or cabinet that is strong

and large enough to support the TV
securely.

yBrackets, bolts and ropes are not

provided. You can obtain additional
accessories from your local dealer.

B type )

2-Screws for Stand Fixing,

2-Washers for Stand Fixing,

2-Nuts for Stand Fixing

(Supplied with TV)

Desk

Stand