1.Safety Precautions
2.Operating Instructions
3.Care and Maintenance
4.Hardware Installation
5.Common Issues
F or Your Records
Write the model and serial numbers here:
Model #
Serial #
You can find them on a label on the side of each unit.
Dealer's Name
Date Purchased
R ead This Manual
Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little
preventive care on your part can save you a great deal of time and money over the life of your air
conditioner.
You'll find many answers to common problems in the Ifyou review our chart of
Troubleshooting Tips first, you may not need to call
for service at all.
CAUTION
?Contact the authorized service technician for repair or maintenance of this unit.
?Contact the installer for installation of this unit.
?The air conditioner is not intended for use by young children or invalids without supervision.
?Young children should be supervised to ensure that
they do not play with the air conditioner.
?When the power cord is to be replaced, replacement work shall be performed by authorized personnel
only.
?Installation work must be performed in accordance with the national wiring standards by authorized
personnel only.
THERMOSTAT |
|
|
|
TIMER |
|
|
5 |
AUTO SWING |
4567 8 |
||
|
|
|
|||
4 |
6 |
OFF |
ON |
||
|
|
7 |
|
3 |
9 |
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
10 |
|
|
8 |
|
1 |
11 |
2 |
|
OPERATION |
|||
|
|
|
|||
|
|
LOW |
HIGH |
STOP |
12 |
1 |
9 |
|
CONSTAN |
OPERATION
HighCool( |
),MedCool( |
)and |
|
|
Low Cool ( |
) provide cooling with different fan speeds. Med Fan ( |
) or Low Fan ( |
) provides air |
|
circulation and filtering without cooling. Off ( o ) turns the air conditioner off. |
|
|||
NOTE: Ifyou move the switch from a cool setting to off or to a fan setting, |
wait at least 3 minutes before |
|||
switching back to a cool setting. |
|
|
||
HIGH COOL : Permits cooling with the high fan speed operation. |
|
|
||
LOW COOL |
: Permits cooling with the low fan speed operation. |
|
|
Cooling Descriptions
For Normal Cooling- Select High Cool or Med Cool with the Operation knob at the midpoint of Thermostat knob.
For Maximum Cooling- Select High Cool with the Operation knob at the highest number available on your Thermostat knob.
For Quieter & Nighttime Cooling- Select Low Cool with the Operation knob at the midpoint of Thermostat knob.
THERMOSTAT
The THERMOSTAT is used to maintain the room temperature. and off to keep the room at the same level of comfort. When you turn the knob to a higher number(the right side) and the indoor air will become cooler.
The 5 or 6 position (the middle position of arc) is a normal setting for average conditions.
AUTO SWING
Auto swing switch controls the horizontal air direction by air swing system (not on all models).
ON ( |
) : Auto swing is operated. |
OFF ( |
) : Auto swing is not operated. |
TIMER
The timer can control the operation times within 12 hours. If you set the timer switch at the "1" position, after 1 hour the unit will be stopped automatically. If you want to operate continuously, set the timer switch at the "CONSTANT" position. The timer switch cannot rotate further colckwise from the "CONSTANT" position. If you set the timer switch at the "STOP" postion, the unit will be stopped all operations.
CAUTION
When the air conditioner has been performed its cooling operation and is turned off or set to the fan position, wait at least 3 minutes before resetting to the cooling operation again.