LG LVC-837 Owner's Manual
V281-M_NA1CLLS_MFL37329830
Before connecting, operating or adjusting this
product, please read this owner’s manual
carefully and completely.
DVD Player &
Video Cassette Recorder
OWNER’S MANUAL
MODEL : LVC-837
http://www.lg.ca
2
This lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the product.
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect it from over heating.
The openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface.This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
the manufacturer's instruction have been adhered to.
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future reference.
Should the unit require maintenance, contact an authorized
service center.
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure.Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids,
such as vases, should be placed on the apparatus.
CAUTION:
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check
the specification page of this owner's manual to be certain.
Do not overload wall outlets.Overloaded wall outlets, loose
or damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or
fire. Periodically examine the cord of your appliance, and if
its appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an authorized
servicer.
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
walked upon.Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord
plug.When installing the product, ensure that the plug is
easily accessible.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
3
1. Read these instructions. - All these safety and operating
instructions should be read before the product is operated.
2. Keep these instructions. - The safety, operating and use
instructions should be retained for future reference.
3. Heed all warnings. - All warnings on the product and in
the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use instr uctions should be followed.
5. Do not use this product near water.– For example: near
a bath tub, wash bowl, kitchen sink, laundry tub, in a wet
basement; or near a swimming pool; and other areas
located near water.
6. Clean only with dry cloth. – Unplug this product from the
wall outlet before cleaning.Do not use liquid cleaners.
7.
Do not block any ventilation openings.Install in accordance with the manufacturer’s instructions.
-
Slots and
openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it
from over- heating.The openings should never be blocked
by placing the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have
been adhered to.
8.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. D
o not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades
with one wider than the other. A grounding
type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles, and the point where they exit from the product.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with apparatus. When a cart is used, use caution when moving
the cart/product combination to avoid injury from
tip-over.
13. Unplug this product during lightning storms or when
unused for long periods of time.
14.
Refer all servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the product, the product has been
exposed to rain or moisture, does not operate normally, or has been dropped.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND
THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire
hazard.The safeguards incorporated in this product will protect you if you observe the following procedures for installation,
use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL ONLY.
4
Contents
Introduction . . . . . . . . . . . . . . . . . . . . .5-9
Moisture Condensation . . . . . . . . . . . . . . . . . .5
Symbol Used in this Manual . . . . . . . . . . . . .5
About the Symbol Display . . . . . . . . . . . .5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .5
About the Remote Control . . . . . . . . . . . . . . .5
Types of Playable Discs . . . . . . . . . . . . . . . . .6
Regional code . . . . . . . . . . . . . . . . . . . . . . . .6
Selecting the Viewing Source . . . . . . . . . . . . .6
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Preparation . . . . . . . . . . . . . . . . . . . .9-18
Connecting an Antenna or Cable TV . . . . . . .10
Basic TV Connections . . . . . . . . . . . . . . .10-11
Optional TV Connections . . . . . . . . . . . . . . .11
Connection to an amplifier . . . . . . . . . . . . . .12
Initial Settings - VCR . . . . . . . . . . . . . . . . .13-14
General Operation . . . . . . . . . . . . . . . . . . . .13
CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
• Auto Clock Set . . . . . . . . . . . . . . . . . . . . .13
• Manual Clock Set . . . . . . . . . . . . . . . . . . .13
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . .13
TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . .14
• Auto Channel Programming . . . . . . . . . .14
• To Add or Erase Channels . . . . . . . . . . . .14
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
• FUNCTION OSD . . . . . . . . . . . . . . . . . .14
• AUDIO MODE . . . . . . . . . . . . . . . . . . . . .14
• BROADCAST TYPE
(STEREO/SAP/MONO) . . . . . . . . . . . . . .14
• AUDIO OUTPUT
(STEREO/LEFT/RIGHT) . . . . . . . . . . . . .14
Displaying Disc Information on-screen . . . . .15
Initial Settings - DVD . . . . . . . . . . . . . . . . .15-18
General Operation . . . . . . . . . . . . . . . . . . . .15
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . .16
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . .16
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
LOCK (Parental Control) . . . . . . . . . . . . . . .17
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Operations - VCR . . . . . . . . . . . . . . .19-25
VCR Tape Playback . . . . . . . . . . . . . . . . .19-20
Basic Instructions . . . . . . . . . . . . . . . . . . . . .19
Auto Tracking . . . . . . . . . . . . . . . . . . . . . . . .19
Manual Tracking . . . . . . . . . . . . . . . . . . . . . .19
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Still Picture and Frame-by-Frame Playback . .19
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . .20
CM SKIP (Commercial Skip) . . . . . . . . . . . . .20
VHS Hi-Fi Stereo/MTS Broadcast . . . . . . . . .20
Hi-Fi Stereo Audio Sound . . . . . . . . . . . . . . .20
MTS (Multi-Channel TV Sound) . . . . . . . . . .20
VCR Tape Recording . . . . . . . . . . . . . . . .21-24
Basic Instructions . . . . . . . . . . . . . . . . . . . . .21
Timer Recording . . . . . . . . . . . . . . . . . . .21-22
Instant Timer Recording . . . . . . . . . . . . . . .23
Recording from External Components . . . . .23
Copying from DVD to VCR . . . . . . . . . . . . . .24
On-Screen Display - VCR . . . . . . . . . . . . . . .24
Additional VCR Information . . . . . . . . . . . . . .25
VCR Auto Play System . . . . . . . . . . . . . . . . .25
S-VHS Quasi Playback (SQPB) . . . . . . . . . .25
Easy Information . . . . . . . . . . . . . . . . . . . . .25
Operations - DVD . . . . . . . . . . . . . .26-32
Playback Setup . . . . . . . . . . . . . . . . . . . . . . .26
General Features . . . . . . . . . . . . . . . . . . .26-27
Additional Features . . . . . . . . . . . . . . . .27-28
Playing an Audio CD or MP3/WMA Disc . . .29
Programmed Playback . . . . . . . . . . . . . . . .29
Viewing a JPEG Disc . . . . . . . . . . . . . . . . . .30
Playing a DivX Movie file . . . . . . . . . . . . . . . .31
Playing a DVD VR format Disc . . . . . . . . . . . .32
Maintenance and Service . . . . . . . . . . . . . . .32
Reference . . . . . . . . . . . . . . . . . . . .33-37
Controlling your TV with the
supplied remote . . . . . . . . . . . . . . . . . . . . . .33
Language Codes List . . . . . . . . . . . . . . . . . .34
Area Codes List . . . . . . . . . . . . . . . . . . . . . . .34
Troubleshooting . . . . . . . . . . . . . . . . . . . .35-36
Specifications . . . . . . . . . . . . . . . . . . . . . . . .37
5
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future reference.
This manual provides information on the operation
and maintenance of your DVD+VCR. Should the unit
require service, contact an authorized service location.
Moisture Condensation
Moisture Condensation
Never operate the DVD+VCR immediately after moving it from a cold location to a warm location. Leave it
for two or three hours without operating it.If you use
the DVD+VCR in such a situation, it may damage
discs/tapes and internal parts.
Symbol Used in this Man
Symbol Used in this Man
ual
ual
Note: Indicates special notes and operating
features.
Tip: Indicates tips and hints for making the task
easier.
A section whose title has one of the following symbols is applicable only to the disc represented by the
symbol.
All discs listed below
DVD and finalized DVD±R/RW
Video CDs
Audio CDs
MP3 files
WMA files
DivX files
About the
About the
Symbol Displa
Symbol Displayy
“ ” may appear on your TV display during operation and indicates that the function is not permitted by
this unit or the disc.
Notes on Discs
Notes on Discs
Handling Discs
Do not touch the playback side of the disc.Hold the
disc by the edges so that fingerprints do not get on
the surface.Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case.Do not expose
the disc to direct sunlight or sources of heat and
never leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing,
clean the disc with a clean cloth.Wipe the disc from
the center out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
About the Remote Contr
About the Remote Controlol
Operation Range
Point the remote control at the remote sensor and
press the buttons.
Distance: About 23 ft (7 m) from the front of the
remote sensor.
Angle: About 30° in each direction of the front of the
remote sensor.
Battery installation
Detach the battery cover on the rear of
the remote control, and insert two
(R03/AAA) size batteries with 3 and #
aligned correctly.
Caution: Do not mix old and new batteries and
never mix different types of batteries such as standard, alkaline, etc.
AAA
AAA
DivX
WMA
MP3
ACD
VCD
DVD
ALL
Introduction
Introduction
6
TTypes of Pla
ypes of Playyabab
le Discs
le Discs
DVD
(8 cm / 12 cm disc)
Audio CD and Video CD
(8 cm / 12 cm disc)
In addition, this unit plays DVD±R/RW and CD-R/RW
that contains audio titles, MP3, WMA, DivX and/or
JPEG files.
This indicates a product feature that is
capable of playing DVD-RW discs recorded
with Video Recording format.
Notes:
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW) disc
itself, some CD-R/RW (or DVD±R/RW) discs
cannot be played on the unit.
• Only plays if DVD-RW is recorded in Video mode
and has been finalized.
• Do not use irregularly shaped CDs (e.g., heartshaped or octagonal) since they may result in
malfunctions.
• This DVD+VCR requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality. Pre-recorded
DVDs are automatically set to these standards.
There are many different types of recordable disc
formats (including CD-R containing MP3 or WMA
files) and these require certain pre-existing conditions (see above) to ensure compatible playback.
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
Regional code
Regional code
This unit has a regional code printed on the rear of
the unit.This unit can play only DVD discs labelled
same as the rear of the unit or “ALL”.
Notes on Regional Codes
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover.This
number must match your DVD+VCR’s regional
code or the disc cannot play.
• If you try to play a DVD with a different region
code from your player, the message “Check
Regional Code” appears on the TV screen.
Notes on Copyrights:
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted
material without permission.
This product features the copy protection function
developed by Macrovision. Copy protection signals
are recorded on some discs.When recording and
playing the pictures of these discs picture noise will
appear.This product incorporates copyright protection
technology that is protected by method claims of certain U.S.patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
Notice for Progressive Scan Use
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT .IF THERE
ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD+VCR,
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.
Selecting the
Selecting the
Vie
Vie
wing Sour
wing Sourcece
You must select one of your output sources (DVD or
VCR) to view on the TV screen.
• If you want to view DVD deck output source:
Press DVD until DVD indicator in the display
window lights and output source of DVD deck is
viewed on the TV screen.
• If you want to view VCR deck output source:
Press VCR until VCR indicator in the display
window lights and output source of VCR deck is
viewed on the TV screen.
Notes:
• If you insert a disc while the DVD+VCR is in the
VCR mode, the DVD+VCR will switch to DVD
mode automatically.
• If you insert a cassette tape without prevention
tab while the DVD+VCR is in the DVD mode, the
DVD+VCR will switch to VCR mode automatically.
7
Introduction
a Disc Tray (DVD deck)
Insert a disc here.
b 1 POWER
Switches the DVD+VCR ON and OFF.
c CH (VV/vv)
To scan up or down through memorized channels.
d
ZZ
DVD
Opens or closes the disc tray.
e Cassette Compar tment (VCR deck)
Insert a video cassette here.
f
ZZ
VCR
Ejects the tape in the VCR deck.
g
../mm
- DVD: Skip to beginning of current chapter or track,
press twice in quick successions to go to previous
chapter or track. Press and hold button for about two
seconds to search backward.
- VCR: Rewinds the tape during the stop mode or for
fast reverse picture search.
h
NN
Starts playback of a disc or tape.
i
MM//>>
DVD: Skip to next chapter or track.Press and hold for
two seconds for a fast forward search.
VCR: Advances the tape during the STOP mode or
for fast forward picture search.
j
xx
Stops playback of the disc or tape.
k DVD/VCR (output select)
Select one of your output sources to view on the TV
screen between DVD and VCR.
l Display Windows
The DVD deck is selected.
A disc is in the DVD deck.
(Lights when a disc is in the DVD deck
and Flashes when no disc.)
Indicates when the Progressive scan is
active.
Indicates repeat mode.
Child Lock is engaged.
DVD+VCR is in timer recording or a timer
recording is programmed (VCR part only).
A cassette is in the VCR deck.
The VCR deck is selected.
DVD+VCR is Recording.(VCR part only)
Indicates PM time. (AM is not displayed.)
Lights when TV mode is active.
Indicates total playing time,
elapsed time, remaining time
or current deck status
(Playback, Pause, etc).
m Remote Sensor
Point the DVD+VCR remote control here.
n LINE2 (VIDEO/AUDIO (L/R))
Connect to the audio/video output of an external
source (Audio system, TV/Monitor, Another VCR).
TV
PM
REC
CR
[P]
DVD
FrFront P
ont P
anel
anel
ba
i
j
k
d
n
c
efhg
l
m
8
POWER
Switches DVD+VCR ON and OFF.
DVD
Selecciona el modo de función del
DVD+VCR a DVD.
VCR
Selecciona el modo de función del
DVD+VCR a VCR.
OPEN/CLOSE
Opens and closes the disc tray.
EJECT
Ejects the tape in the VCR deck.
0-9
Selects numbered options in a
menu.
TV/VCR
To view channels selected by the
VCR tuner
or by the TV tuner.
INPUT
Selects the VCR deck’s source
(Tuner, LINE 1, or LINE 2).
BACKWARD / FORWARD
(m / M)
DVD:Search backward or forward.
VCR: Rewinds/Advances the tape
during the STOP mode, for fast back-
ward/forward picture search.
SKIP (. / >)
Go to next chapter or track.
Returns to beginning of current
chapter or track or go to previous
chapter or track.
PAUSE/STEP (X)
Pause playback or recording
temporarily. Press repeatedly for
frame-by-frame playback.
PLAY (NN)
Starts playback.
STOP (
ÁÁ
)
Stops playback or recording.
MARKER
Marks any point during playback.
SEARCH
Displays Marker Search menu.
CLEAR
Removes a mark on the Marker
Search menu.
REPEAT
Repeat chapter, track, title or all.
TV Control Buttons (see p.33)
DISPLAY
Accesses On-Screen Display.
CLK/CNT
Switches between the clock,
tape counter and tape remaining modes on the display.
FGDE
Selects menu options.
CH/TRK(+/-)
Selects VCR channels.
Adjusts manually the tape’s picture onscreen.
ENTER/OK
Confirms menu selections.
Displays functions on the TV
screen.
DISC MENU
Accesses menu on a DVD disc.
SETUP/MENU
Accesses or removes DVD
Setup menu and VCR menu.
RETURN
Removes the setup menu.
Displays the menu of a video
CD with PBC.
AUDIO
Selects an audio language
(DVD) or an audio channel
(VCD).
SUBTITLE
Selects a subtitle language.
ANGLE
Selects a DVD camera angle, if
available.
ZOOM
Enlarges DVD video image.
REC/ITR (
OO
)
Starts recording. Press repeatedly to set the recording time.
LOCK
Locks/unlocks front panel buttons.
TITLE
Displays the disc’s Title menu, if
available.
PROGRAM
Places a track on the program
list.
RANDOM
Plays tracks in random order.
CM SKIP
Fast forwards picture search
through 30 seconds of recording.
A-B/
Repeats sequence between two
points (A and B).
SPEED
Selects recording speed.
Remote Contr
Remote Controlol
9
Introduction
a ANT.IN
Connect the VHF/UHF/CATV antenna to this terminal.
b VCR IN LINE 1 (VIDEO/AUDIO (Left/Right))
Connect the audio/video output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
c DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV with video and audio inputs.
d COMPONENT/PROGRESSIVE SCAN VIDEO
OUT (Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs.
e AUDIO OUT (Left/Right) (DVD OUT)
Connect to a TV or other equipment with audio inputs.
f AC Power Cord
Plug into the power source.
g RF. OUT
Connect to a TV with RF coaxial inputs.
h COAXIAL (DIGITAL AUDIO OUT jack)
(DVD OUT)
Connect to digital (coaxial) audio equipment.
i S-VIDEO OUT (DVD OUT)
Connect to a S-Video Input on TV.
abcde f
gh
Preparation
Depending on your TV and other equipment there are various ways you can connect the
player. Please refer to the manuals of your TV, VCR, stereo system or other devices as necessary for additional connection information.
Notes:
• The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units
away from each other or turn off the unit after removing the disc.
•
Make sure the DVD+VCR is connected directly to the TV and tune the TV to the correct video input channel.
• Do not connect the DVD+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.
Do not connect the DVD+VCR via another VCR. The DVD image could be distorted by the copy protection
system.
Rear P
Rear P
anel
anel
Caution
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause
permanent damage to the unit.
i
10
Connecting an Antenna
Connecting an Antenna
or Cab
or Cab
le
le TVTV
aa
Antenna
:
Disconnect the antenna from the rear of the TV and
identify the antenna cable.If it is a round 75 ohm
coaxial cable connect it directly to the jack marked
ANT.IN on your DVD+VCR. If your antenna cable is
flat connect it to a 300-ohm to 75-ohm antenna adaptor (not supplied) and slip the adaptor over the
ANT.IN jack. Don’t attempt to screw it into to the
DVD+VCR.
bb
Cable TV:
If your cable connection has no converter or
descrambler, unscrew the cable from your TV and
attach it to the ANT.IN jack on the DVD+VCR. If a
converter is required connect a coaxial cable from the
wall jack to the IN connector on the converter, and a
coaxial cable from the OUT connector on the converter to the ANT.IN on your DVD+VCR.This cable
hookup permits both TV and DVD+VCR operation.
To view or record a CATV channel
1Tune the TV to the DVD+VCR output channel
(CH 3 or 4).
2 Set the DVD+VCR channel selector to the cable
output channel. (Example: CH3)
3 Select a channel using the cable converter.
Notes:
• With this connection, you cannot record one program while viewing another.
• If you are using a cable box to tune channels, it is
not necessary to do Auto Channel Set.
Basic
Basic
TV Connections
TV Connections
Make one of the following connections, depending on
the capabilities of your TV.
Rear of DVD+VCR
Antenna Antenna
OR OR
a
b
Rear of DVD+VCR
L
R
AUDIO INPUT
VIDEO
INPUT
ANTENNA
INPUT
Rear of TV
A1
VR
Y
Pb
Pr
COMPONENT/PROGRESSIVE SCAN
VIDEO INPUT
L
R
AUDIO INPUT
S-VIDEO
INPUT
Rear of TV
S
A2
C
11
Preparation
RF coaxial connection
Connect the RF.OUT jack on the DVD+VCR to the
antenna in jack on the TV using the supplied 75-ohm
Coaxial Cable (R).
How to set the DVD+VCR’s RF output
channel
1. When the DVD+VCR is tur ned off, press and hold
CH (V/v) on the front panel for more than five
seconds.“RF03” or “RF04” appears in the display
window.
2. Press CH (V/v) to change the RF output channel
(RF03 or RF04).Tune the TV to this channel.
3. Turn off the DVD+VCR.
Audio/Video connection
1. Connect the DVD/VCR VIDEO OUT jack on the
DVD+VCR to the video in jack on the TV using
the video cable supplied (V).
2. Connect the Left and Right DVD/VCR AUDIO
OUT jacks on the DVD+VCR to the audio left/right
in jacks on the TV (A1) using the supplied audio
cables.
Note:
If you use this connection, set the TV’s source selector to VIDEO.
Optional
Optional
TV Connections
TV Connections
These connections support only DVD playback.The
tuner and VCR still output through the RF.OUT (R) or
DVD/VCR OUT (A,V) jacks.
S-Video connection
Connect the S-VIDEO OUT jack on the DVD Player
to the S-Video in jack on the TV using the S-Video
cable (S).
Component Video / Progressive Scan
connection
If your television is a high-definition or “digital ready”
television, you may take advantage of the
DVD+VCR’s progressive scan output for the highest
video resolution possible.
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the DVD+VCR to the corresponding in jacks on the TV using an optional Y Pb
Pr cable (C).
Notes:
• Progressive scan does not work with the analog
video connections (yellow VIDEO OUT jack and
S-VIDEO OUT jack).
• When you use Component Video signal, set the
Progressive Scan to “Off” on the setup menu.
• If your TV does not accept the Progressive Scan
format, the picture will appear scrambled.
Audio connection
Connect the Left and Right AUDIO OUT jacks of the
DVD+VCR to the audio left/right in jacks on the TV
using the supplied audio cables (A2).
12
Connection to an Amplifier
Connection to an Amplifier
You can only listen to DVD playback using COAXIAL
(X) and AUDIO OUT (A2) connections.The tuner and
VCR will still be heard through the RF.OUT (R) or
DVD/VCR AUDIO OUT (A1) jack. (See page 10.)
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic II/Pro
Logic
Connect the Left and Right AUDIO OUT (or
DVD/VCR AUDIO OUT) jacks on the DVD+VCR to
the audio left and right in jacks on your amplifier,
receiver, or stereo system using the audio cables
(A1, A2) supplied.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/Video
receiver equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS)
1. Connect one of the DVD+VCR’s DIGITAL AUDIO
OUT jacks (COAXIAL X) to the corresponding in
jack on your amplifier. Use an optional digital
(COAXIAL X) audio cable.
2. You will need to activate the DVD+VCR’s digital
output. (See “AUDIO” on page 17).
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD+VCR (MPEG
2, Dolby Digital and DTS). Check the receiver manual
and the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital
output will be in DTS digital out when DTS audio
stream is selected.
Notes:
• If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.
• Six Channel Digital Surround Sound via digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
•To see the audio format of the current DVD in the
on-screen display, press AUDIO.
Accessory Audio/Video (A/V) Connections to
DVD+VCR
Connect the VCR IN LINE 1 or LINE 2 jacks on the
DVD+VCR to the audio/video out jacks on your
accessory component, using the optional audio/video
cables.(Refer to page 23 for “Recording from
External Components”.)
DIGITAL INPUT
COAXIAL
L
R
AUDIO INPUT
Rear of DVD+VCR
Amplifier (Receiver)
A2A1 X
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and the
double-D symbol are trademarks of Dolby
Laboratories.
DTS and DTS Digital Out are trademarks of
Digital Theater Systems, Inc.
Loading...