LG LT-15AEP User Manual

500-008C

Owner's Manual

Model:LT-15AEP

15.1" LCD Color TV / Monitor

Location

Position your TV so that no bright light or sunlight will shine directly on the screen. Do not expose the TV to vibration, moisture, dust or heat. Also ensure that the TV is placed in a position that allows a free flow of air. Do not cover the ventilation openings on the back cover. You can install the TV on a wall or place it on a table-top or similar flat surface. Mounted the TV securely to eliminate the risk of injury from the TV falling. Contact your Zenith dealer to purchase the optional ceiling mount.

Cleaning

Unplug the TV before cleaning the face of the LCD Screen. Dust the TV by wiping the screen and cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean, damp cloth. Do not use liquid or aerosol cleaners.

Warnings Warnings

WARNING :

To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently.

CAUTION:

Do not attempt to modify this product in any way without written authorization.

Power

This set operates on a DC supply provided by the AC-DC adaptor, the voltage is as indicated on the label on the back cover. Use only the AC-DC adaptor supplied with the set and never apply an AC mains to the set directly. The AC-DC adaptor operates on an AC mains supply, the voltage is as indicated on the label of the AC-DC adaptor. a. Connect the DC plug of the AC-DC adaptor to the 12V socket of the set. b. Connect the AC-DC adaptor and it°Øs power cord. c. Connect the power cord to an AC mains. In the event of thunderstorms or power cuts, please pull out the mains plug of the AC-DC adaptor and the aerial plug. Do not allow anything to rest upon or roll over the power cord, and do not place the set where the power cord is subject to damage.

Service

Never remove the back cover of the TV, this can expose you to high voltage and other hazards. If the TV does not operate properly, unplug it and call your dealer. Antenna Connect the antenna cable to the connection marked Ant. (on the rear). For best reception, use an outdoor antenna.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING :

To reduce the risk of electric shock do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Contents

Warnings 2~3 Contents 5 Supplied Accessories 6 Installation 7 Controls 8~10

Controller of panel 8 Remote controller 9

Basic Operation 11

Turning ths TV On and off 11 Programme selection 11 Volume adjustment 11 Q.View 11 Sound Mute function 11 On screen Language selection 11

On Screen Menus and Displays 12 Setting up TV Programme 13~15

Auto Programme 13 Manual Programme 14 Programme edit 15

Picture Control 16

Manual picture control 16 Auto picture control 16

Sound Control 17 Other functions 18~19

TV, SCART, VIDEO and S-VIDEO modes 18 Auto sleep 18 Blue back 18 Sleep timer 19 Sound output selection 19

Teletext 20~21

Text On/Off 20 TOP text 20 FLOF text 20 Special Teletext function 21

External Equipment Connection 22~23

Antenna connection 22 SCART jack 22 A/V Inputs 22 S-VIDEO Input 23 Headphone jack 23

Connecting PC as monitor 24~25 Product specifications 26 Troubleshooting 27 Limited Warranty 28

Before operating the set, please read this manual carefully.

Installation

Supplied Accessories

L Make Sure the following accessories are provided with Product.

1. AC/DC adaptor

3. Remote controller

5. Owner’s manual

6. PC IN cable

7. PC Audio IN cable

4. Batteries (type AAA)

2. AC Cord

Installation Options * You can install the TV on a wall or place it on a table-like surface. * To eliminate any risk of injury from the TV falling, it should be mounted securely.

1. Wall Installation

Caution: Do not install the TV on a weak wall surface, like plaster etc. It is not needed any bracket or installation accessory with the exception of 2 nails or screws. Distance of holes of back panel is 305mm,

a. Drive 2 nails or screws on the wall, in the location you want to install the TV. b. Hang the TV on the nails or screws.

2. Desktop Installation

POWER

SSM

PSM

I/II Q.VIEW

TV/AV

PRV

CVOL VOLB

PRW

TEXT/MIX

SIZE SLEEP INDEX

UPDATE TIME REVEAL

305mm

Controls

All the functions can be controlled with the remote controller. Some functions can also be adjusted with the buttons on the front panel of the set.

Remote controller

Before you use the remote controller, please install the batteries.

1. POWER

Turns the TV on from standby ro off to standby mode.

2. MUTE

Turns the sound on and off.

3. NUMBER buttons

Select programme numbers.

4. PSM (Picture Status Memory)

Recalls your preferred picture setting

5. SSM (Sound Status Memory)

Recalls your preferred sound setting

6. TV/AV

Selects TV, SCART, VIDEO, S-VIDEO or PC mode. Clears the menu from the screen.

7. MENU

Displays a main menu.

8. I/II

Selects the language during dual language broadcast. Selects the sound output.

9. Q.VIEW

Returns to the previously viewed programme.

<<CONTROLLER OF PANEL>>

1. MENU

Displays a menu.

2. – PR + (Programme Up/Down) Selects a programme or a menu item.

3. POWER STANDBY INDICATOR

Illuminates brightly when the TV is in standby mode. / Dims when the TV is switched on.

4. POWER Switches TV set on or off.

5. Remote control sensor Accepts the IR signal of remote controller.

6. –VOL+ (Volume Up/Down)

Adjusts the volume./ Adjusts menu settings.

7. TV/AV

Selects TV, SCART, VIDEO, S-VIDEO or PC mode / Clears the menu from the screen.

1 Ant. (Antenna input)

2. DC12V adaptor input

3. PC/DTV INPUT

4. SCART

5. HEADPHONE out

Connect a headphone to this socket.

6. S-VIDEO Input

Connect the output of an S -VIDEO VCR to the S-VIDEO input. Connect the audio outputs of an S-VIDEO VCR to the AV-IN audio inputs.

7. A/V-IN Inputs

Connect the Audio/Video outputs of external equipment to these inputs.

8. PC Audio IN Connect the audio cable from the PC to the PC Audio IN of the set.

1 23 4 6578

12 3456 7

- PR + - VOL + TV/AV