LG LSXS26366S/02, LSXS26366S/01, LSXS26366S/00, LSXS26326W/01, LSXS26326W/00 Owner’s Manual

...
ENGLISH
OWNER’S MANUAL
SIDE BY SIDE REFRIGERATOR
Please read this owner’s manual thoroughly before operating and keep it handy for reference at all times.
Model Name(*=color) LSXS26326*
LSXS26366* LSXS26466* LSXS26386* LSXC22326*
G LSXS26336*S73SGS G
S74SDS GS73SDS GS74SGS GS73SDD
GS73SGG LSXC22386* LSXC22336*
ww w.lg.com
2 TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
3 PRODUCT FEATURES
4 IMPORTANT SAFETY
INSTRUCTIONS
7 COMPONENTS
7 Refrigerator Exterior
8 Refrigerator Interior
10 INSTALLATION
10 Installation Overview
10 Specifi cations
11 Unpacking Your Refrigerator
11 Choosing the Proper Location
11 - Flooring
12 - Ambient Temperature
12 - Measuring the Clearances
12 Removing/Assembling the Refrigerator Door Handles
13 Removing/Assembling the Refrigerator Doors
13 - Removing the Left (Freezer) Door
1 - Removing the Right (Refrigerator) Door
14 - Reinstalling the Right (Refrigerator) Door
14 - Reinstalling the Left (Freezer) Door
15 Connecting the Water Line
15 - Before You Begin
15 - Water Pressure
15 - What You Will Need
17 - Water Line Installation Instructions
18 Turning On the Power
19 Leveling and Door Alignment
19 - Leveling
19 - Door Alignment
20 HOW TO USE
20 Before Use
21 Control Panel
21 - Airfl ow
22 - Control Panel Features
24 Automatic Icemaker
24 - When You Should Turn the Icemaker Off
24 - Normal Sounds You May Hear
24 - Preparing for Vacation
24 - Power Failure
26 Ice and Water Dispenser
27 Storing Food
27 - Food Preservation Location
29 - Food Storage Tips
29 - Storing Frozen Food
30 Detaching and Assembling the Storage Bins
32 Door-In-Door
33 Adjusting the Refrigerator Shelves
34 MAINTENANCE
34 Cleaning
35 Replacing the Water Filter
39 SMART DIAGNOSIS
39 Using Smart Diagnosis
TM
TM
40 TROUBLESHOOTING
40 Common Product Questions
41 Noises You Might Hear
42 Before Calling for Service
51 WARRANTY (USA)
52 WARRANTY (CANADA)
3PRODUCT FEATURES
PRODUCT FEATURES
* Depending on the model, some of the following functions may not be available.
DOOR-IN-DOOR REFRESHMENT CENTER
The Door-in-Door Refreshment Center provides a convenient area for
frequently-used items that require easy access.
FRESH ZONE DRAWERS
The Fresh Zone drawers are designed to help keep your fruits and
vegetables fresh.
DOOR ALARM
The Door Alarm function is designed to prevent refrigerator malfunctioning
that could occur if a refrigerator door remains open. If a refrigerator door
is left open for more than 60 seconds, a warning alarm SOUNDSAT
30 second intervals.
ENGLISH
AUTO CLOSING HINGE
The refrigerator doors close automatically with a slight push. (The door
only closes automatically when it is open at an angle less than 30°.)
ICE PLUS
Ice production can be increased by approximately 20 percent when the
freezer section is maintained at the coldest temperature for a 24-hour pe-
riod.
4 IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
This guide contains many important safety messages. Always read and obey all safety messages.
Power
Installation
This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill or hurt you or others, or cause damage to the product.
All safety messages will be preceded by the safety alert symbol and the hazard signal word WARNING or CAUTION. These words mean:
WARNING You can be killed or seriously injured if you do not follow instructions.
CAUTION Indicates an imminently hazardous situation which, if not avoided, may result in
minor or moderate injury, or product damage.
WARNING
To reduce the risk of re, electric shock, or personal injury when using your product, basic safety precautions should be followed, including the following:
NEVER unplug your refrigerator by pulling on the power cord. Always grip the plug
and pull it straight out from the outlet. Immediately repair or replace all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.
ower outlet.
Unplug the power plug immediately in the event of a blackout or thunderstorm. Plug in the power plug with the power cord facing downward. Do not plug appliance into a damaged wall outlet. If the appliance is submerged or partially
appliance immediately from the main circuit breakers. Contact the nearest service center
Contact an authorized service center when you install or relocate the refrigerator.
When moving your refrigerator away from the wall, be careful not to roll over or damage the power cord.
Your refrigerator must always be plugged to its own outlet which is adequately grounded. The energy current should only be 115 V ~ 60 Hz, 127 V ~ 60 Hz or 220 V~ 50/60 Hz, AC (according to the National rating type). with a 15 A fuse for voltages between 115 and 127 V or 10 A to 220 V independent voltage protection system from the main supply of your home. (The electrical installation must be
by a
Do not install the refrigerator where there may be a danger of the unit falling.
Use
DO NOT allow children to climb, stand, or hang on the refrigerator doors or on the shelves in the refrigerator. They could damage the refrigerator and seriously injure themselves.
Do not hang on to or place heavy objects on the refrigerator’s dispenser.
Do not place heavy or dangerous objects (bottles with liquid) on the refrigerator.
Do not put live animals inside the refrigerator.
Do not allow children to climb into the product when it is in use.
In the event of a gas leak (propane/ LPG), ensure adequate ventilation and contact an authorized service center before resuming use. Do not touch or disassemble the electrical outlet of the refrigerator.
In the event of a refrigerant leak, move
objects away from the refrigerator. Ensure adequate ventilation and contact an authorized service center.
Do not use or place substances (chemicals, medicine, cosmetics, etc) near the refrigerator or store them inside the refrigerator. Do not place the refrigerator in the vicinit
Do not ov or pack items too tightly into door bins. Doing so may cause damage to the bin or personal injury if items are removed with excessive force.
5IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety precautions should be followed, including the following:
This product is not to be used for special purposes such as the storage of medicine or test materials or for use on ships, etc.
Unplug the power plug before cleaning or repairing the refrigerator.
When you replace the LED lamp in the refrigerator, unplug the refrigerator or turn off the power.
Do not modify or extend the power cord.
Do not use a dryer to dry the interior. Do not light a candle to remove interior odors.
We do not recommend the use of exten­sion cables. However, if you still choose to utilize an extension cable, it is absolutely necessary that it is listed in the UL (in the United States) or CSA (in Canada), that it supports three-pronged plugs and that the electrical current support a 15 A fuse for voltages between 115 and 127 V or 10 A to 220 V. (Verify the electric specification of your country.)
Do not use an outlet that can be turned off with a switch. Do not use an extension cord. It is the user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong wall outlet.
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord (Verify the electric specification of your country.).
Do not use an adapter plug and plug the power plug into a multi-outlet extension cord.
Disconnect the power cord immediately if you hear a noise, smell a strange odor or detect smoke coming from the appliance.
Turn the power off if water or dust penetrates into the refrigerator. Call a service agent.
Do not disassemble or modify the refrigerator.
Do not put hands, feet, or metal objects below or behind the refrigerator.
Do not operate the refrigerator or touch the power cord with wet hands.
Children should be supervised to ensure they do not use the device as a toy
In refrigerators with automatic icemakers, avoid contact with the moving parts of the ejector mechanism or with the heating element that releases the cubes. Do not place fingers or hands on the automatic ice-making mechanism while the refrigerator is plugged in.
When dispensing ice from the dispenser, do not use crystal ceramics.
Do not touch the cold surfaces in the freezer compartment with wet or damp hands, when your refrigerator is in operation.
Do not put glass containers, glass bottles or soda in the freezer.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Do not refreeze frozen food that has thawed completely. Doing so may result in a serious health issue.
If you are throwing away your old refrigerator, make sure the CFC or HCFC coolant is removed for proper disposal by a qualified servicer. If you release CFC/HCFC coolant, you may be fined or imprisoned in accordance with the relevant environmental law.
Junked or abandoned refrigerators are dangerous, even if they are sitting for only a few days. When disposing of the refrigerator, remove the packing materials from the door or take off the doors but leave the shelves in place so that children may not easily climb inside.
If the refrigerator is connected to a circuit protected b
y fuses, use time delay fuses.
ENGLISH
WARNING:
This product contains chemicals known to the State of California to cause
ancer and birth defects or other reproductive harm.
c
Wash hands after handling.
6 IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
To reduce the r re, electric shock, or personal injury when using your product, basic safety precautions should be followed, including the following:
Installation
Use
CAUTION
The refrigerator must be properly installed in accordance with the Installer Instructions that were taped to the front of the refrigerator.
Be careful when you unpack and install the refrigerator. Immediately dispose of plastic and other packing materials out of the reach of children.
The appliance must be positioned for easy access to a power source.
Close the door carefully when children are around.
K ch point areas; clearances between the doors and cabi­nets are necessarily small. Be careful closing doors when children are nearby.
If you store food improperly, be aware that it may fall and cause injury.
Do not use aerosols near the refrigera­tor.
Do not store articles on the top of the appliance.
If the appliance's power cord is damaged, the cord must be replaced by the manu­facturer or its service agent or a similarly
hazard. Do not operate the appliance with a damaged power cord.
Caution: This device is meant to be used in applications domestic and the like, such as: areas of kitchen sta in shops, oces and other environments I work; cottages and customers in hotels, motels and other environments residential; environments bed and breakfast rate; hospitality non­commercial and similar applications.
Refrigerator compartment’s lamps are interior lighting LED type, so maintenance must be performed by a qualied technician.
Do not use extension cords or ungrounded (two prong) adapters. Do not store explosive substances such as
in this appliance.
Maintenance
Do not use strong detergents like wax or thinners for cleaning. Clean with a soft
cloth.
Wipe foreign objects (such as dust and water) o and contact areas regularly.
Do not store, disassemble or repair the refrigerator by yourself.
Remove any dust or foreign matter from the power plug pins.
Do not use a wet or damp cloth when cleaning the plug.
If the refrigerator is disconnected from the power supply, wait f minutes before plugging it back in.
If you notice a chemical or burning plastic smell or see smoke, unplug the refrigerator immediately and contact your LG Electronics Service Center.
The insulation in this unit contains cyclopentane or a pentane like blowing
and requires a special elimination process. Before discontinuing use of this refrigerator, contact local authorities to arrange forsafe disposal of the unit.
IMPORTANT : Use only new water hose-sets, do not reuse old water hose -sets
the prongs of the power plug
ve
NOTE
Before installing, cleaning or changing lights, unplug the refrigerator.
and reset the control (of thermostat, refrigerator or freezer, depending on your model) to the desired position.
SAVE THESE INSTRUCTIONS
7COMPONENTS
COMPONENTS
Use this page to become more familiar with the parts and features of your refrigerator.
*T
Refrigerator Exterior for Door-In-Door Models
Freezer
Preserves frozen food.
Control Panel
Sets the refrigerator and freezer temperatures, the w dispenser mode.
Filtered Water and Ice Dispenser
tual product may di er depending on the model.
Refrigerator
Preserves food.
Door-in-Door
ENGLISH
water and ice.
Refrigera
tor Exterior for Standard Model
Vertical Horizontal
Freezer
Preserves frozen food.
Control Panel
Sets the refrigerator and freezer temperatures, the w dispenser mode.
Refrigerator
Preserves food.
Filtered Water and Ice Dispenser
water and ice.
8 COMPONENTS
ENGLISH
Freezing Zone
Refrigerator Interior for Door-In-Door Models
Freezer Compartment
LED Lamp
Automatic
Icemaker
Shelf
Door Bin
Door Bin
NOTE
Parts, features and options vary by model. Your model may not include every option.
Refrigerator Compartment
Dairy Corner
Filter
LED Lamp
Shelf
Refreshment center
Shelf
Fresh zone
Door Bin
Refrigerator Interior for Standard Model
9COMPONENTS
Vertical Display
LED Lamp
Automatic
Icemaker
Shelf
Door Bin
Freezing Zone
Door Bin
Horizontal Display
Freezer Compartment
ENGLISH
Refrigerator Compartment
Dairy Corner
Filter
LED Lamp
Door Bin
Shelf
Shelf
Door Bin
Door Bin
Fresh zone
Door Bin
Freezer Compartment
LED Lamp
Automatic
Icemaker
Shelf
Freezing Zone
Door Bin
NOTE
Parts, features and options vary by model. Your model may not include every option.
Refrigerator Compartment
Dairy Corner
Filter
LED Lamp
Door Bin
Shelf
Door Bin
Fresh zone
Door Bin
10 INSTALLATION
ENGLISH
INSTALLATION
Installation Overview
Please read the following installation instr fter purchasing this product or transporting it to another location.
1 Unpacking your
refrigerator
2 Choosing the proper
location
3 Disassembling/Assembling
WARNING
Connect to potable water supply only.
4 Connecting the water
supply and water line
5 Leveling and Door
Alignment
Specifications
The appearance and sp constant product improvements.
Side by Side refrigerator model
Description Side by Side refrigerator
Electrical requirements
Min. / Max. Water pressure
Dimensions for Standard Depth Models LSXS26****, GS7****
Dimensions for Counter Depth Models LSXC22****
Net weight for Standard Depth Models LSXS26****, GS7****
Net weight for Counter Depth Models LSXC22****
Net weight for Counter Depth Models LSXC22336*
115 V ~ 60 Hz and fused at 15 A 127 V ~ 60 Hz and fused at 15 A 220 V~ 50/60 Hz and fused at 10 A (Refer to rating label inside refrigerator compartment).
20 - 120 psi (138 - 827 kP
35.9 " (W) X 35.9" (D) X 70.3" (H), 50.6 " (D w/ door open) 912 mm (W) X 9 12 mm (D) X 1785 mm (H), 1286 mm (D w/ door open) After Door Removal: 28.7" (730 mm) (D)
35.9 " (W) X 31.8" (D) X 70.3" (H), 46.5" (D w/ door open) 912 mm (W) X 807 mm (D) X 1785 mm (H), 1 180 mm (D w/ door open) After Door Removal: 24.6" (624 mm) (D)
DID Model: 304.3 lb (138 kg) Basic Model Vertical: 277.8 lb (126 kg)
Basic Model Horizontal: 264.6 lb (120 kg)
DID Model: 277.8 lb (126 kg) Non DID Model: 251.4 lb (114 kg)
Non DID Model: 280 lb (127 kg)
11INSTALLATION
Unpacking Your Refrigerator
WARNING
Use two or more people to move and
install the refrigerator. Failure to do so
can result in back or other injury.
Your refrigerator is heavy. When moving
the refrigerator for cleaning or service,
be sure to protect the
the refrigerator straight out when mov-
ing it. Do not wiggle or walk the refrig-
erator when trying to move it, as
damage could occur.
Keep materials and va-
pors, such as gasoline, away from the
refrigerator. Failure to do so can result
explosion, or death.
Remove tape and any temporary labels from your refrigerator before using. Do not remove any warning-type labels, the model and serial number label
r. Always pull
Choosing the Proper Location
Select a place where a water supply can
be easily connected for the automatic icemaker.
NOTE
The water pressure must be between 20 and 120 psi (138 and 827 kPa) on models without a water 120 psi (276 and 827 kPa) on models with a
lter.
water
The refrigerator should always be plugged into its own individual properly grounded electrical outlet. This provides the best performance and also prevents overloading house wiring
from overheated wires. It is recommended that a separate circuit serving only this appliance be provided.
ter and between 40 and
ENGLISH
To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with y water and dry.
Do not use sharp instruments, rubbing alcohol,
move tape or glue. These products can damage the surface of your refrigerator.
Refrigerator shelves are installed in the ship­ping position. Please reinstall shelves according to your individual storage needs.
Wipe with warm
ve cleaners to re-
WARNING
To reduce the risk of electric shock, do not install the refrigerator in a wet or damp area.
Flooring
To avoid noise and vibration, the unit must be leveled and installed on a solidly constructed
r. If required, adjust the leveling legs to compensate for unev front should be slightly higher than the rear to aid in door closing. Leveling legs can be turned easily by tipping the cabinet slightly. Turn the leveling legs to the left to raise the unit or to the right to lower it. (See Leveling and Door Alignment.)
r. The
NOTE
Installing on carpeting, soft tile surfaces, a platform or weakly supported structure is not recommended.
12 INSTALLATION
ENGLISH
Ambient Temperature
Install this appliance in an area where the temperature is between 55°F (13°C) and 110°F (43°C). If the temperature around the appli­ance is too low or high, cooling ability may be adversely affected.
Measuring the Clearances
Too small of a distance from adjacent items may result in lowered freezing capability and increased electricity consumption charges. Allow at least 24 inches (61 cm) in front of the refrigerator to open the doors, and at least 2 inches (5.08 cm)
between the back of the refrigerator and the wall as well as on the sides of the refrigera­tor and adjacent walls or objects.
24” (61 cm)
Removing/Assembling the Refrigerator Door Handles
NOTE
When it is necessary to move the refrigerator through a narrow opening, removing the doors is the recommended procedure. If it is necessary to remove the handles, follow the directions below. The appearance of the handle may vary from what is shown in the
illustrations
Removing the Handles
1
Loosen the set screws with a 3/32 in. Allen wrench and remove the handle.
2 Loosen the mounting fasteners that connect
to the refrigerator door and handle using a ¼ in. Allen wrench, remove the mounting fasteners.
Mounting
Fasteners
2” (5.08 cm)
Set Screw
Allen Wrench
Assembling the Handles
1
Assemble the mounting fasteners at both ends of the handle using a ¼ in. Allen wrench.
2 Place the handle on the door by fitting
the handle footprints over the mounting fasteners and tightening the set screws with a 3/32 in. Allen wrench.
Mounting Fasteners
13INSTALLATION
Removing/Assembling the Refrigerator Doors
When it is necessary to move the refrigerator through a narrow opening, removing the doors is the recommended procedure.
WARNING
Electric Shock Hazard
Disconnect electrical supply to refrigerator before installing.
result in death or serious injury.
Before removing freezer door, disconnect water line connectors (one white tube, one blue tube). NOTE: Do not remove freezer door if either the white or blue tube is still connected. To remove connectors use the support block that is on the upper shelf in the refrigerator.
If your entrance door is too narrow for the refrigerator to pass through, remove the refrigerator doors and move the refrigerator sideways through the doorway. Use two or more people to remove and install the refrigerator doors. Failure to do so can result in back or other injury. Disconnect the electrical supply to the refrigerator before installation. Failure to do so could result in serious injury or death. Do not put hands, feet or other objects into the air vents or bottom of the refrigerator. You may be injured or receive an electrical shock. Be careful when handling the hinge and stopper. You may be injured. Remove food and bins before detaching the doors and drawers.
Failure to do so could
1
Support Block
2
3
120 mm
Removing the Left (Freezer) Door with Water Line Connection
1. Loosen the hinge cover screws and remove the hinge cover. Disconnect all wire harnesses.
2. Rotate the hinge lever counterclockwise ( ) and lift the upper hinge ( ).
hinge cover
upper
hinge
hinge lever
wire harness
upper hinge
CAUTION
When removing the upper hinge, be careful that the door does not fall forward.
3. Remove the freezer compartment door by lifting it upward. This time, the door should be lifted enough for the water feed tube to be completely pulled out.
Enough for
the water feed tube
to be completely
pulled out
CAUTION
Place the door, inside facing up, on a non-scratching surface. Be careful not to damage the water feed tube.
Removing the Right (Refrigerator) Door
1. Open the door. Remove the top hinge cover screw.
2. Use a
at blade screwdriver to pry back the
hooks (not shown) of
the hinge cover from the top of the refrigerator cabinet.
the cover. Disconnect all wire harnesses.
Lif
t up
ENGLISH
wire harness
14 INSTALLATION
hinge lever
upper
hinge
lower hinge
ENGLISH
3. Rotate the hinge lever clockwise (1). Lift the
Reinstalling the Left (Freezer) Door
1. Feed the water tubes through the lower hinge pin and place the door onto the lower hinge pin. Water hoses should be behind the leg to prevent damage.
upper hinge free of the hinge lever latch (2).
CAUTION
When lifting the hinge free of the latch, be careful that the door does not
fall forward.
4. Lift the door from the lower hinge pin.
5. Place the door, inside facing up, on a non­scratching surface.
NOTE
Do not remove the grease on the sur­face of the gasket or hinge. Do not remove the sensor assembly in the right upper hinge cover.
Reinstalling the Right (Refrigerator) Door
1. Place the door onto the lower hinge pin.
2. Fit the upper hinge over the hinge lever latch and into place. Rotate the lever counterclockwise to secure the hinge.
3. Reconnect all wire harnesses. Hook the tab on the switch side of the cover under the edge of the wire opening in the cabinet top. Position the cover and replace the screw.
2. Fit the top hinge over hinge lever latch and into place. Rotate the lever clockwise to secure the hinge.
3. Install the grounding screw and connect all the wire harnesses.
4. Hook the tab on the door switch side of the cover, under the edge of the wire, opening in the cabinet top. Position the cover into place. Insert and tighten the cover screw.
5. Reconnect the water tubes by inserting the tubes into the connectors. The tube is inserted correctly when only one guide line is showing out of two.
Collet
Tube
Insert Line
Open the door and turn the hose toward the inside. Water hoses should be behind the leg to prevent
damage.
CO RRE CT
IN COR RE CT
Tube is completely inserted when only one guide line is showing out of two.
COR RE CT
INC OR REC T
Water hoses should be cut with a clean, straight edge to avoid leaks.
Not Straight Damaged Stretched
15INSTALLATION
Connecting the Water Line
Before You Begin
This water line installation is not covered by the refrigerator warranty. Follow these instructions carefully to minimize the risk of expensive water damage.
Water hammer (water banging in the pipes) in house plumbing can cause damage to refrigerator parts and can lead to water leakage or flooding. Call a qualified plumber to correct water hammer before installing the water supply line to the refrigerator.
CAUTION
To prevent burns and product damage, only connect the refrigerator water line to a cold water supply.
CAUTION
Do not install the icemaker tubing in areas where temperatures fall below freezing.
Water Pressure
You will need a cold water supply. The water pressure must be between 20 and 120 psi ( 138
– 827 kPa ) on
ween 40 and 120 psi ( 276 – 827 kPa ) on
bet models with a water filter. If the water pressure does not reach the minimum required pressure,
a separate booster pump may be required
for normal automatic icemaker and cool water
dispensing operation.
If a reverse osmosis water filtration system is connected to your cold water supply, this water line installation is not covered by the refrigerator warranty. Follow these instructions carefully to minimize the risk of expensive water damage.
If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 - 413 kPa, or less than 2.0~3.0 sec. to fill a cup of 7 oz capacity).
models without a water filter and
CAUTION
Wear eye protection during installation to prevent injury.
If the water pressure from the reverse osmosis system is less than 21 psi or 1.5 kgf/cm2 (takes more than 4.0 sec to fill a cup of 7 oz capacity):
y Check to see if the sediment filter in
the reverse osmosis system is blocked. Replace the filter if necessary.
y Allow the storage tank on the reverse
osmosis system to refill after
y If the issue concerning water pressure
from reverse osmosis remains, call a licensed, qualified plumber.
y All installations must be in accordance
with local plumbing code requirements.
heavy usage.
What You Will Need
y Copper Tubing, ¼ in. outer diameter,
to connect the refrigerator to the water supply. Be sure both ends of the tubing are cut square. To determine how much tubing you need: measure the distance from the water valve on the back of the refrigerator to the water supply pipe. Then, add 8 feet (2.4 m). Be sure there is sufficient extra tubing (about 8 feet [2.4 m] coiled into 3 turns of about 10 in. [25 cm] diameter) to allow the refrigerator to move out from the wall after installation. Keep the total length of the feed water pipe tube within 26 ft (8 m). Be careful to avoid getting a kink in the tube. If the tube is longer than 26 ft (8 m), it may cause the water feed to malfunction.
y Power drill. y ½ in. or adjustable
wrench.
y Flat blade and Phillips
head screwdrivers.
y Two ¼ in. outer
diameter compression nuts and 2 ferrules (sleeves) to connect
the copper tubing to the shutoff valve and the refrigerator water valve.
ENGLISH
16 INSTALLATION
ENGLISH
y If your existing copper water line
has a flared fitting at the end, you will need an adapter (available at plumbing supply stores) to connect the water line to the refrigerator OR you can cut off the flared fitting with a tube cutter and then use a compression fitting.
y Shutoff valve to connect to the cold
water line. The shutoff valve should
have a water inlet with a minimum inside diameter of 5/32 in. at the point of connection to the COLD WATER LINE. Saddle-type shutoff valves are included in many water supply kits. Before purchasing, make sure a saddle-
type valve complies with your local plumbing codes.
NOTE
A self-piercing saddle type water valve should not be used.
WARNING
Electrical Shock Hazard:
When using any electrical device (such as a power drill) during installation, be sure the device is battery powered, double insulated or grounded in a manner that will prevent the hazard of electric shock.
17INSTALLATION
Water Line Installation Instructions
WARNING
When using any electrical device (such as a power drill) during installation, be sure the device is battery powered, double insulated or grounded in a manner that will prevent the hazard of electric shock.
Install the shuto valve on the nearest frequently used drinking water line.
1 SHUT OFF THE MAIN WATER SUPPLY
Turn on the nearest faucet to relieve the pressure on the line.
2 CHOOSE THE VALVE LOCATION
Choose a location for the valve that is easily accessible. It is best to connect into the side of a vertical water pipe. When it is necessary to connect into a horizontal water pipe, make the connection to the top or side, rather than at the bottom, to avoid drawing o any sediment from the water pipe.
4 FASTEN THE SHUTOFF VALVE
Fasten the shuto valve to the cold water pipe with the pipe clamp.
5 TIGHTEN THE PIPE CLAMP
Pipe Clamp
Saddl e - Type Shuto Valve
Vertical Cold Water Pipe
NOTE
Commonwealth of Massachusetts Plumbing Codes 248CMR shall be adhered to. Saddle valves are illegal and use is not permitted in Massachusetts. Consult with your licensed
plumber.
Tighten the clamp screws until the sealing washer begins to swell.
Do not overtighten clamp or
NOTE:
you may crush the tubing.
6 ROUTE THE TUBING
Pipe Clamp
Clamp Screw
Washer
Inlet End
ENGLISH
3 DRILL THE HOLE FOR THE VALVE
Drill a ¼ in. hole in the water pipe using a sharp bit. Remove any burrs resulting from drilling the hole in the pipe. Be careful not to allow water to drain into the drill. Failure to drill a ¼ in. hole may result in reduced ice production or smaller cubes.
NOTE
The hookup line cannot be white, plastic tubing. Licensed plumbers must use only copper tubing (NDA tubing #49595 or #49599) or Cross Link Polyethylene (PEX) tubing.
Route the tubing between the cold water line and the refrigerator.
Route the tubing through a hole drilled in the wall or oor (behind the refrigerator or adjacent base cabinet) as close to the wall as possible.
NOTE
Be sure there is sucient extra tubing (about 8 feet (2,4 m) coiled into 3 turns of about 10 in. (0,25 m) diameter) to allow the refrigerator to move out from the wall after installation.
Loading...
+ 39 hidden pages