LG LSXS26326S, LSXS26366S User Manual
ENGLISH
OWNER’S MANUAL
SIDE BY SIDE
REFRIGERATOR
Please read this owner’s manual thoroughly before
operating and keep it handy for reference at all times.
Model Name*=color number
LSXS26326*
LSXS26366*
LSXS26466*
LSXS26386*
P/No. MFL67653437
www.lg.com
2 TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
3 PRODUCT FEATURES
4 IMPORTANT SAFETY
INSTRUCTIONS
7 COMPONENTS
7 Refrigerator Exterior
8 Refrigerator Interior
10 INSTALLATION
10 Installation Overview
10 Specifi cations
11 Unpacking Your Refrigerator
11 Choosing the Proper Location
11 - Flooring
12 - Ambient Temperature
12 - Measuring the Clearances
12 Removing/Assembling the Refrigerator
Door Handles
13 Removing/Assembling the Refrigerator
Doors
13 - Removing the Left (Freezer) Door
13 - Removing the Right (Refrigerator) Door
14 - Reinstalling the Right (Refrigerator) Door
14 - Reinstalling the Left (Freezer) Door
15 Connecting the Water Line
15 - Before You Begin
15 - Water Pressure
15 - What You Will Need
17 - Water Line Installation Instructions
18 Turning On the Power
19 Leveling and Door Alignment
19 - Leveling
19 - Door Alignment
20 HOW TO USE
20 Before Use
21 Control Panel
21 - Airfl ow
22 - Control Panel Features
24 Automatic Icemaker
24 - When You Should Turn the Icemaker Off
24 - Normal Sounds You May Hear
24 - Preparing for Vacation
24 - Power Failure
26 Ice and Water Dispenser
27 Storing Food
27 - Food Preservation Location
29 - Food Storage Tips
29 - Storing Frozen Food
30 Detaching and Assembling the Storage Bins
32 Door-In-Door
33 Adjusting the Refrigerator Shelves
34 MAINTENANCE
34 Cleaning
35 Replacing the Water Filter
39 SMART DIAGNOSIS
39 Using Smart Diagnosis
TM
TM
40 TROUBLESHOOTING
40 Common Product Questions
41 Noises You Might Hear
42 Before Calling for Service
51 WARRANTY (USA)
52 WARRANTY (CANADA)
3PRODUCT FEATURES
PRODUCT FEATURES
* Depending on the model, some of the following functions may not be available.
DOOR-IN-DOOR REFRESHMENT CENTER
The Door-in-Door Refreshment Center provides a convenient area for
frequently-used items that require easy access.
FRESH ZONE DRAWERS
The Fresh Zone drawers are designed to help keep your fruits and
vegetables fresh.
DOOR ALARM
The Door Alarm function is designed to prevent refrigerator malfunctioning
that could occur if a refrigerator door remains open. If a refrigerator door
or freezer drawer is left open for more than 60 seconds, a warning alarm
sounds at 30 second intervals.
ENGLISH
AUTO CLOSING HINGE
The refrigerator doors close automatically with a slight push. (The door
only closes automatically when it is open at an angle less than 30°.)
ICE PLUS
Ice production can be increased by approximately 20 percent when the
freezer section is maintained at the coldest temperature for a 24-hour period.
4 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
This guide contains many important safety messages. Always read and obey all safety messages.
This is the safety alert symbol. It alerts you to safety messages that inform you of hazards
that can kill or hurt you or others, or cause damage to the product.
All safety messages will be preceded by the safety alert symbol and the hazard
signal word WARNING or CAUTION. These words mean:
WARNING You can be killed or seriously injured if you do not follow instructions.
CAUTION Indicates an imminently hazardous situation which, if not avoided, may result in
minor or moderate injury, or product damage.
WARNING
To reduce the risk of fire, electric shock, or personal injury when using your product,
basic safety precautions should be followed, including the following:
Power
NEVER unplug your refrigerator by pulling
on the power cord. Always grip the plug
firmly and pull it straight out from the
outlet.
Immediately repair or replace all power
cords that have become frayed or
otherwise damaged. Do not use a cord
that shows cracks or abrasion damage
along its length or at either the plug or
connector end.
Do not use an uncertified power outlet.
Unplug the power plug immediately in the
event of a blackout or thunderstorm.
Plug in the power plug with the power
cord facing downward.
Installation
Contact an authorized service center when
you install or relocate the refrigerator.
When moving your refrigerator away from
the wall, be careful not to roll over or
damage the power cord.
Prior to use, ensure that you are
connecting this product to a dedicated
grounded electrical outlet rated for use
with this product (115V, 60Hz, AC only).
It is the user’s responsibility to replace
a standard 2-prong wall outlet with a
standard 3-prong wall outlet.
Do not install the refrigerator where there
may be a danger of the unit falling.
Use
DO NOT allow children to climb, stand,
or hang on the refrigerator doors or on
the shelves in the refrigerator. They could
damage the refrigerator and seriously
injure themselves.
Do not hang on to or place heavy objects
on the refrigerator’s dispenser.
Do not place heavy or dangerous objects
(bottles with liquid) on the refrigerator.
Do not put live animals inside the
refrigerator.
Do not allow children to climb into the
product when it is in use.
In the event of a gas leak (propane/
LPG), ensure adequate ventilation and
contact an authorized service center
before resuming use. Do not touch or
disassemble the electrical outlet of the
refrigerator.
In the event of a refrigerant leak, move
flammable objects away from the
refrigerator. Ensure adequate ventilation
and contact an authorized service center.
Do not use or place flammable substances
(chemicals, medicine, cosmetics, etc) near
the refrigerator or store them inside the
refrigerator. Do not place the refrigerator
in the vicinity of flammable gas.
Do not overfill or pack items too tightly into
door bins. Doing so may cause damage
to the bin or personal injury if items are
removed with excessive force.
5IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
To reduce the risk of fire, electric shock, or personal injury when using your product, basic
safety precautions should be followed, including the following:
This product is not to be used for special
purposes such as the storage of medicine
or test materials or for use on ships, etc.
Unplug the power plug before cleaning or
repairing the refrigerator.
When you replace the light bulb in the
refrigerator, unplug the refrigerator or turn
off the power.
Do not modify or extend the power cord.
Do not use a dryer to dry the interior. Do
not light a candle to remove interior odors.
For your safety, this appliance must be
properly grounded. Have the wall outlet
and the circuit checked by a qualified
electrician to make sure the outlet is
properly grounded.
Do not use an outlet that can be turned
off with a switch. Do not use an extension
cord. It is the user’s responsibility to
replace a standard 2-prong wall outlet
with a standard 3-prong wall outlet.
Do not, under any circumstances, cut or
remove the third (ground) prong from the
power cord.
Do not use an adapter plug and plug the
power plug into a multi-outlet extension
cord.
Disconnect the power cord immediately if
you hear a noise, smell a strange odor or
detect smoke coming from the appliance.
Turn the power off if water or dust
penetrates into the refrigerator. Call a
service agent.
Do not disassemble or modify the
refrigerator.
Do not put hands, feet, or metal objects
below or behind the refrigerator.
Do not operate the refrigerator or touch
the power cord with wet hands.
In refrigerators with automatic icemakers,
avoid contact with the moving parts
of the ejector mechanism or with the
heating element that releases the cubes.
Do not place fingers or hands on the
automatic ice-making mechanism while
the refrigerator is plugged in.
When dispensing ice from the dispenser,
do not use crystal ceramics.
Do not touch the cold surfaces in the
freezer compartment with wet or damp
hands, when your refrigerator is in
operation.
Do not put glass containers, glass bottles
or soda in the freezer.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning the use of the
appliance by a person responsible for their
safety.
Do not refreeze frozen food that has
thawed completely. Doing so may result
in a serious health issue.
If you are throwing away your old
refrigerator, make sure the CFC or HCFC
coolant is removed for proper disposal
by a qualified servicer. If you release
CFC/HCFC coolant, you may be fined or
imprisoned in accordance with the relevant
environmental law.
Junked or abandoned refrigerators are
dangerous, even if they are sitting for
only a few days. When disposing of the
refrigerator, remove the packing materials
from the door or take off the doors but
leave the shelves in place so that children
may not easily climb inside.
If the refrigerator is connected to a circuit
protected by fuses, use time delay fuses.
ENGLISH
WARNING:
This product contains chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm.
Wash hands after handling.
6 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
To reduce the risk of fire, electric shock, or personal injury when using your product, basic
safety precautions should be followed, including the following:
CAUTION
Installation
The refrigerator must be properly
installed in accordance with the Installer
Instructions that were taped to the front
of the refrigerator.
Be careful when you unpack and install
the refrigerator. Immediately dispose of
plastic and other packing materials out of
the reach of children.
The appliance must be positioned for
easy access to a power source.
Use
Close the door carefully when children
are around.
Keep fingers out of pinch point areas;
clearances between the doors and cabinets are necessarily small. Be careful
closing doors when children are nearby.
If you store food improperly, be aware
that it may fall and cause injury.
Do not use aerosols near the refrigera-
tor.
Do not store articles on the top of the
appliance.
To avoid hazard , damaged power
cords must be replaced by the manufacturer or its service agent or a
similarly qualified technician. Do no
operate the appliance with a damage
power cord
Maintenance
Do not use strong detergents like wax or
thinners for cleaning. Clean with a soft
cloth.
Wipe foreign objects (such as dust and
water) off the prongs of the power plug
and contact areas regularly.
Do not store, disassemble or repair the
refrigerator by yourself.
Remove any dust or foreign matter from
the power plug pins.
Do not use a wet or damp cloth when
cleaning the plug.
If the refrigerator is disconnected from
the power supply, wait for at least five
minutes before plugging it back in.
If you notice a chemical or burning
plastic smell or see smoke, unplug the
refrigerator immediately and contact
your LG Electronics Service Center.
The insulation in this unit contains
cyclopentane or a pentane-like gas
which is fl ammable and requires a
special elimination process. Before
discontinuing use of this refrigerator,
contact local authorities to arrange for
safe disposal of the unit.
IMPORTANT : Use only new water hose-sets,
do not reuse old water hose -sets
SAVE THESE INSTRUCTIONS
7COMPONENTS
COMPONENTS
Use this page to become more familiar with the parts and features of your refrigerator.
*The appearance and specifications of the actual product may differ depending on the model.
Refrigerator Exterior for Door-In-Door Models
Freezer
Preserves frozen food.
Door-in-Door
Control Panel
Sets the refrigerator and
freezer temperatures, the
water filter condition and the
dispenser mode.
Filtered Water
and Ice Dispenser
Dispenses purified
water and ice.
Refrigerator
Preserves food.
ENGLISH
Refrigerator Exterior for Basic Model
Freezer
Preserves frozen food.
Control Panel
Sets the refrigerator and
freezer temperatures, the
water filter condition and the
dispenser mode.
Filtered Water
and Ice Dispenser
Dispenses purified
water and ice.
Refrigerator
Preserves food.
8 COMPONENTS
Refrigerator Interior for Door-In-Door Models
ENGLISH
LED Lamp
Automatic
Icemaker
Shelf
Door Bin
Freezing Zone
Door Bin
Freezer
Compartment
Refrigerator
Compartment
Dairy Corner
Filter
LED Lamp
Shelf
Refreshment center
Shelf
Fresh zone
Door Bin
NOTE
Parts, features and options vary by model.
Your model may not include every option.
9COMPONENTS
Refrigerator Interior for Basic Model
LED Lamp
Automatic
Icemaker
Shelf
Door Bin
Freezing Zone
Door Bin
Freezer
Compartment
Refrigerator
Compartment
ENGLISH
Dairy Corner
Filter
LED Lamp
Door Bin
Shelf
Shelf
Door Bin
Door Bin
Fresh zone
Door Bin
NOTE
Parts, features and options vary by model.
Your model may not include every option.
10 INSTALLATION
INSTALLATION
ENGLISH
Installation Overview
Please read the following installation instructions first after purchasing this product or transporting it
to another location.
1 Unpacking your
refrigerator
2 Choosing the proper
location
3 Disassembling/Assembling
NOTE
Connect to potable water
4 Connecting the water
supply and water line
5 Leveling and Door
Alignment
supply only,
Specifications
The appearance and specifications listed in this manual may vary due to constant product improvements.
Side by Side refrigerator model
Description Side by Side refrigerator
Electrical requirements 115 Volts, 60 Hz, AC only, and fused at 15 or 20 amperes
Min. / Max. Water pressure 20 - 120 psi (138 - 827 kPa) on models without water filter,
40 - 120 psi ( 276 – 827 kPa ) on models with filter
35.9 " (W) X 35.9 " (D) X 70.3 " (H), 50.6 " (D w/ door open)
Dimensions
Net weight 297.6 lb. (135 kg)
912 mm (W) X 912 mm (D) X 1785 mm (H), 1286 mm (D
w/ door open)
11INSTALLATION
Unpacking Your Refrigerator
WARNING
Use two or more people to move and
install the refrigerator. Failure to do so
can result in back or other injury.
Your refrigerator is heavy. When moving
the refrigerator for cleaning or service,
be sure to protect the floor. Always pull
the refrigerator straight out when mov-
ing it. Do not wiggle or walk the refrig-
erator when trying to move it, as floor
damage could occur.
Keep flammable materials and va-
pors, such as gasoline, away from the
refrigerator. Failure to do so can result
in fire, explosion, or death.
Remove tape and any temporary labels from
your refrigerator before using. Do not remove
any warning-type labels, the model and serial
number label, or the Tech Sheet that is located
under the front of the refrigerator.
To remove any remaining tape or glue, rub
the area briskly with your thumb. Tape or glue
residue can also be easily removed by rubbing
a small amount of liquid dish soap over the
adhesive with your fingers. Wipe with warm
water and dry.
Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage
the surface of your refrigerator.
Refrigerator shelves are installed in the shipping position. Please reinstall shelves according
to your individual storage needs.
Choosing the Proper Location
Select a place where a water supply can
be easily connected for the automatic
icemaker.
NOTE
The water pressure must be between 20
and 120 psi (138 and 827 kPa) on models
without a water filter and between 40 and
120 psi (276 and 827 kPa) on models with a
water filter.
The refrigerator should always be plugged
into its own individual properly grounded
electrical outlet rated for 115 Volts, 60 Hz,
AC only, and fused at 15 or 20 amperes.
This provides the best performance
and also prevents overloading house
wiring circuits which could cause a fire
hazard from overheated wires. It is
recommended that a separate circuit
serving only this appliance be provided.
WARNING
To reduce the risk of electric shock, do not
install the refrigerator in a wet or damp area.
Flooring
To avoid noise and vibration, the unit must be
leveled and installed on a solidly constructed
floor. If required, adjust the leveling legs to
compensate for unevenness of the floor. The
front should be slightly higher than the rear to
aid in door closing. Leveling legs can be turned
easily by tipping the cabinet slightly. Turn the
leveling legs to the left to raise the unit or to
the right to lower it. (See Leveling and Door
AlIgnment.)
NOTE
Installing on carpeting, soft tile surfaces, a
platform or weakly supported structure is
not recommended.
ENGLISH
12 INSTALLATION
Ambient Temperature
ENGLISH
Install this appliance in an area where the
temperature is between 55°F (13°C) and 110°F
(43°C). If the temperature around the appliance is too low or high, cooling ability may be
adversely affected.
Measuring the Clearances
Too small of a distance from adjacent items
may result in lowered freezing capability and
increased electricity consumption charges.
Allow at least 24 inches (61 cm) in front of the
refrigerator to open the doors, and at least
2 inches (5.08 cm) between the back of the
refrigerator and the wall.
24” (61 cm)
Removing/Assembling the
Refrigerator Door Handles
NOTE
When it is necessary to move the refrigerator
through a narrow opening, removing the
doors is the recommended procedure. If it
is necessary to remove the handles, follow
the directions below. The appearance of the
handle may vary from what is shown in the
illustrations
Removing the Handles
1 Loosen the set screws with a 3/32 in. Allen
wrench and remove the handle.
2 Loosen the mounting fasteners that connect
to the refrigerator door and handle using a
¼ in. Allen wrench, remove the mounting
fasteners.
Mounting
Fasteners
Set Screw
2” (5.08 cm)
Allen Wrench
Assembling the Handles
1 Assemble the mounting fasteners at both
ends of the handle using a ¼ in. Allen
wrench.
2 Place the handle on the door by fitting
the handle footprints over the mounting
fasteners and tightening the set screws
with a 3/32 in. Allen wrench.
Mounting Fasteners
13INSTALLATION
Removing/Assembling the
Refrigerator Doors
When it is necessary to move the refrigerator
through a narrow opening, removing the doors
is the recommended procedure.
WARNING
If your entrance door is too narrow
for the refrigerator to pass through,
remove the refrigerator doors and move
the refrigerator sideways through the
doorway.
Use two or more people to remove and
install the refrigerator doors. Failure to do
so can result in back or other injury.
Disconnect the electrical supply to the
refrigerator before installation. Failure
to do so could result in serious injury or
death.
Do not put hands, feet or other objects
into the air vents or bottom of the
refrigerator. You may be injured or receive
an electrical shock.
Be careful when handling the hinge and
stopper. You may be injured.
Remove food and bins before detaching
the doors and drawers.
hinge
cover
upper
hinge
1. Open the door. Remove the top hinge cover
screw.
2. Use a fl at blade screwdriver to pry back the
hooks (not shown) of the hinge cover from
the top of the refrigerator cabinet. Lift up
the cover.
3. Disconnect all the wire harnesses.
hinge lever
4. Rotate the hinge lever counterclockwise
(1). Lift the upper hinge free of the hinge
lever latch (2).
wire
harness
upper hinge
ENGLISH
Removing the Left (Freezer) Door
with Water Line Connection
Pull up the water feed tube while pressing area
(figure 1) as shown in the figure below. Make
sure the color of the water lines match.
If a tube end is deformed or abraded,
NOTE:
trim the part away. Disconnecting the tube
under the door causes about 0.13 gallons (0.5
liters) of water to flow out. Put a large container
at the end of the tube to prevent water from
draining onto the floor.
Figure 1
CAUTION
When lifting the hinge free of the latch, be
careful that the door does not fall forward.
5. Lift the door from the lower hinge pin, being
careful to pull the water lines through the
lower hinge pin.
Engough for
the water feed tube
to be completely
pulled out
lower hinge
6. Place the door, inside facing up, on a
non-scratching surface. Be careful not to
damage the water feed tube.
14 INSTALLATION
wire
harness
hinge lever
upper
hinge
lower hinge
Removing the Right (Refrigerator) Door
ENGLISH
1. Open the door. Remove the top hinge cover
screw.
2. Use a flat blade screwdriver to pry back the
hooks (not shown) of the hinge cover from
the top of the refrigerator cabinet. Lift up
the cover. Disconnect all wire harnesses.
3. Rotate the hinge lever clockwise (1). Lift the
upper hinge free of the hinge lever latch (2).
CAUTION
When lifting the hinge free of the latch, be
careful that the door does not fall forward.
4. Lift the door from the lower hinge pin.
Reinstalling the Right (Refrigerator) Door
1. Place the door onto the lower hinge pin.
2. Fit the upper hinge over the hinge lever
latch and into place. Rotate the lever
counterclockwise to secure the hinge.
3. Reconnect all wire harnesses. Hook the tab
on the switch side of the cover under the
edge of the wire opening in the cabinet top.
Position the cover and replace the screw.
Reinstalling the Left (Freezer) Door
1. Feed the water tubes through the lower
hinge pin and place the door onto the
lower hinge pin. Water hoses should be
behind the leg to prevent damage.
2. Fit the top hinge over hinge lever latch and
into place. Rotate the lever clockwise to
secure the hinge.
3. Install the grounding screw and connect all
the wire harnesses.
4. Hook the tab on the door switch side of the
cover under the edge of the wire opening
in the cabinet top. Position the cover into
place. Insert and tighten the cover screw.
5. Reconnect the water tubes by inserting
the tubes into the connectors. The tube is
inserted correctly when only one guide line
is showing out of two.
5. Place the door, inside facing up, on a nonscratching surface.
NOTE
Do not remove the grease on the sur-
face of the gasket or hinge.
Do not remove the sensor assembly in
the right upper hinge cover.
Collet
Tube
Insert Line
NOTE
Water hoses should be cut with a
clean, straight edge to avoid leaks.
Not Straight Damaged Stretched
15INSTALLATION
Connecting the Water Line
Before You Begin
This water line installation is not covered by the
refrigerator warranty. Follow these instructions
carefully to minimize the risk of expensive water
damage.
Water hammer (water banging in the pipes)
in house plumbing can cause damage to
refrigerator parts and can lead to water leakage
or flooding. Call a qualified plumber to correct
water hammer before installing the water
supply line to the refrigerator.
CAUTION
To prevent burns and product damage, only
connect the refrigerator water line to a cold
water supply.
If you use your refrigerator before connecting
the water line, make sure the icemaker power
switch is in the OFF (O) position.
CAUTION
Do not install the icemaker tubing in areas
where temperatures fall below freezing.
Water Pressure
You will need a cold water supply. The water
pressure must be between 20 and 120 psi ( 138
– 827 kPa ) on
between 40 and 120 psi ( 276 – 827 kPa ) on
models with a water filter. If the water pressure
does not reach the minimum required pressure,
a separate booster pump may be required
for normal automatic icemaker and cool water
dispensing operation.
If a reverse osmosis water filtration system is
connected to your cold water supply, this water
line installation is not covered by the refrigerator
warranty. Follow these instructions carefully to
minimize the risk of expensive water damage.
If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the reverse osmosis system needs
to be a minimum of 40 to 60 psi (2.8 kgf/cm2
~ 4.2 kgf/cm2, or less than 2.0~3.0 sec. to fill a
cup of 7 oz capacity).
models without a water filter and
CAUTION
Wear eye protection during installation to
prevent injury.
If the water pressure from the reverse osmosis
system is less than 21 psi or 1.5 kgf/cm2 (takes
more than 4.0 sec to fill a cup of 7 oz capacity):
Check to see if the sediment filter in
the reverse osmosis system is blocked.
Replace the filter if necessary.
Allow the storage tank on the reverse
osmosis system to refill after
If the issue concerning water pressure
from reverse osmosis remains, call a
licensed, qualified plumber.
All installations must be in accordance
with local plumbing code requirements.
he
avy usage.
What You Will Need
Copper Tubing, ¼ in. outer diameter,
to connect the refrigerator to the water
supply. Be sure both ends of the tubing
are cut square.
To determine how
much tubing you
need: measure the
distance from the
water valve on the back of the refrigerator
to the water supply pipe. Then, add 8 feet
(2.4 m). Be sure there is sufficient extra
tubing (about 8 feet [2.4 m] coiled into 3
turns of about 10 in. [25 cm] diameter) to
allow the refrigerator to move out from
the wall after installation. Keep the total
length of the feed water pipe tube within
26 ft (8 m). Be careful to avoid getting a
kink in the tube. If the tube is longer than
26 ft (8 m), it may cause the water feed
malfunction.
Power drill.
½ in. or adjustable
wrench.
Flat blade and Phillips
head screwdrivers.
Two ¼ in. outer
diameter compression
nuts and 2 ferrules (sleeves) to connect
the copper tubing to the shutoff valve and
the refrigerator water valve.
to
ENGLISH
16 INSTALLATION
ENGLISH
If your existing copper water line
has a flared fitting at the end, you
will need an adapter (available at
plumbing supply stores) to connect
the water line
to the
refrigerator OR
you can cut off
the flared fitting with a tube cutter
and then use a compression fitting.
Shutoff valve to connect to the cold
water line. The shutoff valve should
have a water inlet with a minimum
inside diameter of 5/32 in. at the
point of connection to the COLD
WATER LINE. Saddle-type shutoff
valves are included in many water
supply kits.
Before
purchasing,
make sure
a saddle-
type valve complies with your local
plumbing codes.
NOTE
A self-piercing saddle type water valve
should not be used.
WARNING
Electrical Shock Hazard:
When using any electrical device (such as a
power drill) during installation, be sure the
device is battery powered, double insulated
or grounded in a manner that will prevent the
hazard of electric shock.
17INSTALLATION
Water Line Installation Instructions
WARNING
When using any electrical device (such
as a power drill) during installation, be
sure the device is battery powered,
double insulated or grounded in a
manner that will prevent the hazard of
electric shock.
Install the shutoff valve on the nearest
frequently used drinking water line.
1 SHUT OFF THE MAIN WATER SUPPLY
Turn on the nearest faucet to relieve the
pressure on the line.
2 CHOOSE THE VALVE LOCATION
Choose a location
for the valve that is
easily accessible. It is
best to connect into
the side of a vertical
water pipe. When it is
necessary to connect
into a horizontal water pipe, make the
connection to the top or side, rather
than at the bottom, to avoid drawing
off any sediment from the water pipe.
4 FASTEN THE SHUTOFF VALVE
Fasten the shutoff valve to the cold water
pipe with the pipe clamp.
5 TIGHTEN THE PIPE CLAMP
Pipe Clamp
Saddle-Type
Shutoff Valve
Vertical Cold
Water Pipe
NOTE
Commonwealth of Massachusetts Plumbing
Codes 248CMR shall be adhered to. Saddle
valves are illegal and use is not permitted in
Massachusetts. Consult with your licensed
plumber.
Tighten the clamp screws until the sealing
washer begins to swell.
NOTE:
6 ROUTE THE TUBING
Pipe Clamp
Clamp Screw
Do not overtighten clamp or
you may crush the tubing.
Washer
Inlet End
ENGLISH
3 DRILL THE HOLE FOR THE VALVE
Drill a ¼ in. hole in
the water pipe using
a sharp bit. Remove
any burrs resulting
from drilling the
hole in the pipe. Be
careful not to allow
water to drain into
the drill. Failure to drill a ¼ in. hole may
result in reduced ice production or smaller
cubes.
NOTE
The hookup line cannot be white, plastic
tubing. Licensed plumbers must use only
copper tubing (NDA tubing #49595 or
#49599) or Cross Link Polyethylene (PEX)
tubing.
Route the tubing between the cold water
line and the refrigerator.
Route the tubing through a hole drilled in
the wall or floor (behind the refrigerator or
adjacent base cabinet) as close to the wall as
possible.
NOTE
Be sure there is sufficient extra tubing (about
8 feet coiled into 3 turns of about 10 in.
diameter) to allow the refrigerator to move
out from the wall after installation..
Loading...