11 Installation Overview
12 Unpacking the Refrigerator
12 Choosing the Proper Location
14 Removing/Assembling Handles
14 Removing/Assembling the Doors
17 Connecting the Water Line
20 Leveling and Door Alignment
21 Turning on the Power
37 MAINTENANCE
37 Cleaning
38 Replacing the Water Filter
43 TROUBLESHOOTING
43 FAQs: Frequently Asked Questions
44 Before Calling for Service
53 WARRANTY (USA)
55 WARRANTY (CANADA)
22 OPERATION
22 Before Use
23 Control Panel
24 Airflow
25 Ice and Water Dispenser
26 Ice Compartment
27 Automatic Icemaker
28 Storing Food
30 Detaching/Assembling the Storage Bins
31 InstaView Function
31 Door-in-Door
32 Adjusting the Refrigerator Shelves
33 SMART FUNCTIONS
33 Smart ThinQ Application
35 Smart Grid Function
36 Smart Diagnosis™ Function
ENGLISH
PRODUCT FEATURES
Depending on the model, some of the following functions may not be available.
FILTERED WATER AND ICE DISPENSER
The water dispenser dispenses fresh, chilled water.
The ice dispenser dispenses cubed and crushed ice.
DOOR ALARM
The Door Alarm function is designed to prevent refrigerator malfunctioning that could occur if a refrigerator
door or freezer door remains open. If a refrigerator door or freezer door is left open for more than 60 seconds,
a warning alarm sounds at 30-second intervals.
DOOR-IN-DOOR REFRESHMENT CENTER
The Door-in-Door Refreshment Center provides a convenient area for frequently used items that require easy
access.
FRESH ZONE DRAWERS
The Fresh Zone drawers are designed to help keep fruits and vegetables fresh.
3PRODUCT FEATURES
AUTO-CLOSING HINGE
The refrigerator doors and freezer drawers close automatically with a slight push. (The door only closes
automatically when it is open at an angle less than 30°.)
ICE PLUS
Ice production is increased when the freezer section is maintained at the coldest temperature for a 24-hour
period.
4SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and
follow all safety messages.
These words mean:
CAUTION
You may be injured or cause damage to the product if you do not follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and
tell you what may happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of explosion, re, death, electric shock, scalding or injury
to persons when using this product, follow basic precautions, including the
following:
California Safe Drinking Water and Toxic Enforcement Act
• This product contains chemicals known to the state of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
INSTALLATION
• To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including the
use of long-sleeved gloves and safety glasses.
• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has
missing or broken parts, including a damaged cord or plug.
• Only connect this product to a dedicated grounded electrical outlet rated for use with this product (115 V, 60
Hz, AC only). It is the user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong
wall outlet.
• Do not use an outlet that can be turned off with a switch. Do not use an extension cord.
• The appliance must be positioned for easy access to a power source.
• When moving the refrigerator, be careful not to roll over or damage the power cord.
• Contact an authorized service center when installing or relocating the refrigerator.
• Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
ENGLISH
• Keep packing materials out of the reach of children. Packaging material can be dangerous for children.
There is a risk of suffocation.
• Do not install the refrigerator in a damp or dusty place where insulation on electrical parts may deteriorate.
• Do not place the refrigerator in direct sunlight or expose it to the heat from heating appliances such as
stoves or heaters.
• Do not bend or pinch the power cord excessively or place heavy objects on it.
OPERATION
• This product is not to be used for special purposes such as the storage of medicine or test materials or for
use on ships, etc.
• DO NOT allow children to climb, stand, or hang on the refrigerator doors or on the shelves in the
refrigerator. They could damage the refrigerator and seriously injure themselves.
• Do not allow children to climb into the refrigerator. They could be trapped and suffocated.
• Children should be supervised to ensure that they do not play with the refrigerator.
• Keep ngers out of pinch point areas; clearances between the doors and cabinets are necessarily small. Be
careful closing doors when children are nearby.
• Do not touch frozen food or the metal parts in the freezer compartment with wet or damp hands. Doing so
may cause frostbite.
• Do not refreeze frozen food that has thawed completely. Doing so may result in a serious health hazard.
• Do not use an adapter plug or plug the power plug into a multi-outlet extension cord.
• Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector
end. Immediately have all power cords that have become frayed or otherwise damaged repaired or replaced
by qualied service personnel.
• Do not operate the refrigerator or touch the power cord with wet hands.
• Do not modify or extend the power cord.
• Do not use an uncertied power outlet. Do not plug appliance into a damaged wall outlet.
• Do not put hands, feet or other objects into the air vents or bottom of the refrigerator. Doing so could result
in personal injury or electric shock.
• In the event of a gas leak (propane/LPG), ensure the area is adequately ventilated and contact an
authorized service center before resuming use. Do not touch the refrigerator or power cord of the
refrigerator.
• Disconnect the power cord immediately and contact an authorized service center if there is a strange noise,
odor, or smoke coming from the appliance.
• Do not use any fuse (such as copper, steel wire, etc.) other than a standard fuse.
• Do not place or use an electrical appliance inside the refrigerator, unless it is of a type recommended by the
manufacturer.
• Do not put animals inside the appliance.
• Do not place heavy or fragile objects, liquid lled containers, combustible substances, or ammable objects
(such as candles and lamps) on the appliance.
• Avoid contact with any moving parts of the ejector mechanism or with the heater that releases the ice
cubes. DO NOT place ngers in the automatic icemaker when the refrigerator is plugged in.
• When dispensing ice from the dispenser, do not use a fragile container.
5SAFETY INSTRUCTIONS
6SAFETY INSTRUCTIONS
• If connected to a circuit protected by fuses, use time delay fuse.
• Do not store explosive substances such as aerosol cans with a ammable propellant in this appliance.
MAINTENANCE
• Do not use a hair dryer to dry the inside of the refrigerator.
• Do not light a candle to remove odors in the refrigerator.
• In the event of a refrigerant leak, move ammable objects away from the refrigerator. Ensure the area is
adequately ventilated and contact an authorized service center.
• Keep ammable materials and vapors, such as gasoline, away from the refrigerator.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user maintenance shall not be made by children without
supervision.
• Unplug the power plug before cleaning or repairing the refrigerator.
• The refrigerator and freezer compartment lights are interior LED lighting, and service should be performed
by a qualied technician.
• Unplug the power plug immediately in the event of a blackout or thunderstorm.
• Turn the power off if water or dust penetrates into the refrigerator. Call a service agent.
• Do not store glass containers or soda in the freezer compartment. Contents may expand when frozen,
break the container and cause injury.
• Do not store, disassemble or repair the appliance yourself or allow unqualied personnel to do so.
DISPOSAL
• Junked or abandoned refrigerators are dangerous, even if they are sitting for only a few days. When
disposing of the refrigerator, remove the packing materials from the door or take off the doors but leave the
shelves in place so that children may not easily climb inside.
• If disposing of a refrigerator, make sure the refrigerant is removed for proper disposal by a qualied servicer.
If you release the refrigerant, you may be ned or imprisoned in accordance with the relevant environmental
law.
GROUNDING INSTRUCTIONS
• Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with
a qualied electrician or service personnel if you are in doubt whether the appliance is properly grounded.
Do not modify the plug provided with the appliance; if it will not t the outlet, have a proper outlet installed by
a qualied electrician.
• Have a certied electrician check the wall outlet and wiring for proper grounding.
• Never unplug the appliance by pulling on the power cord. Always grip the plug rmly and pull straight out
from the outlet. Failure to do so may damage the power cord, resulting in a risk of re and electric shock.
ENGLISH
CAUTION
To reduce the risk of minor or moderate injury to persons, malfunction, or damage
to the product or property when using this product, follow basic precautions,
including the following:
• Do not hang on to or place heavy objects on the refrigerator’s dispenser.
INSTALLATION
• Do not install the refrigerator where there may be a danger of the unit falling.
• The refrigerator must be properly installed in accordance with the Installation Instructions.
OPERATION
• Do not use aerosols near the refrigerator.
• This appliance is intended to be used only in domestic and similar applications.
• Do not strike or apply excessive force to any glass surface. Do not touch glass surfaces if they are cracked
or broken.
• Do not overll or pack items too tightly into door bins. Doing so may cause damage to the bin or personal
injury if items are removed with excessive force.
• Do not overll the appliance with food. Doing so may cause personal injury or property damage.
• Do not hang on to or place heavy objects on the refrigerator’s dispenser.
7SAFETY INSTRUCTIONS
MAINTENANCE
• Do not use strong detergents like wax or thinners for cleaning. Clean with a soft cloth.
• Remove foreign objects (such as dust and water) off the prongs of the power plug and contact areas. Do
not use a wet or damp cloth when cleaning the plug.
• Do not spray water directly on the inside or outside of the refrigerator.
• Do not clean glass shelves or covers with warm water when they are cold. They may break if exposed to
sudden temperature changes.
SAVE THESE INSTRUCTIONS
8PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS
The appearance and specications listed in this manual may vary due to constant product improvements.
Electrical requirements: 115 V, 60 Hz
Min. / Max. water pressure: 20 - 120 psi (138 - 827 kPa) on models without water lter.
40 – 120 psi (276 – 827 kPa) on models with lter.
Model LSXS26396S
DescriptionStandard-depth, Side by Side refrigerator
Net weight306.5 lb. ( 139 kg )
Model LSXC22396S
DescriptionCounter-depth, Side by Side refrigerator
Net weight280 lb. (127 kg)
ENGLISH
PRODUCT OVERVIEW
1
8
5
The images in this guide may be different from the actual components and accessories, which are subject to
change by the manufacturer without prior notice for product improvement purposes.
Exterior
9PRODUCT SPECIFICATIONS
1
2
3
4
Filtered Water and Ice Dispenser
Dispenses puried water and ice.
LED Display
2
Displays the refrigerator and freezer temperature,
the water lter condition and the dispenser mode.
Control Panel
3
Sets the refrigerator and freezer temperatures,
the water lter condition and the dispenser mode.
Freezer
4
Frozen food compartment
5
6
7
8
Handle
Opens and closes the refrigerator door.
Door-in-Door Button
6
Press this button to open the Door-in-Door.
InstaView Door-in-Door
7
The InstaView Door-in-Door compartment allows
for easy access to commonly used food items.
Refrigerator
8
Fresh food compartment
10 PRODUCT SPECIFICATIONS
3
9
Interior
LSXS26396S/LSXC22396S
1
9
3
4
3
6
7
5
2
Automatic Icemaker
1
Automatically produce and store ice.
Freezer Door Bins
2
Store small packages of frozen food. Do not
store ice cream or food which will be stored for a
long period of time within these baskets.
LED interior lamps
Light up the inside of the refrigerator.
Freezer Shelf
4
Adjust the freezer shelves to t large or tall items.
Freezer Drawer
5
Store long-term frozen items. The number of
drawers may vary by model.
Water lter
6
Purify water.
8
10
Refrigerator Shelf
7
Shelves are adjustable to suit individual storage
needs. Adjust the shelf height by emptying and
removing the shelf and inserting it on a different
set of shelf supports. The number of refrigerator
shelves varies by model.
Fresh Zone
8
Storage for deli, fruit, or vegetables.
Door-in-Door Case
Open the outer Door-in-Door for easy access to
frequently used items without letting a lot of cold
air out of the refrigerator.
Refrigerator Door Bins
10
Standard door bins are adjustable to t taller
items.
NOTE
• The lter should be replaced every 6 months. See
the Replacing the Water Filter section in this manual
for details.
ENGLISH
INSTALLATION
Installation Overview
Please read the following installation instructions rst after purchasing this product or transporting it to another
location.
Unpacking the RefrigeratorChoosing the Proper LocationDisassembling/Assembling
11INSTALLATION
Connecting the Water LineLeveling and Door Alignment
CAUTION
• Connect to a potable water supply only.
12 INSTALLATION
Unpacking the Refrigerator
WARNING
• Use two or more people to move and install the
refrigerator. Failure to do so can result in back
injury or other injury.
• The refrigerator is heavy. Protect the oor when
moving the refrigerator for cleaning or service.
Always pull the refrigerator straight out when
moving it. Do not wiggle or walk the refrigerator
when trying to move it, as oor damage could
occur.
• Keep ammable materials and vapors, such as
gasoline, away from the refrigerator. Failure to
do so can result in re, explosion, or death.
NOTE
• Remove tape and any temporary labels from
your refrigerator before using. Do not remove any
warning labels, the model and serial number label,
or the Tech Sheet that is located under the front of
the refrigerator.
• To remove any remaining tape or glue, rub the area
briskly with your thumb. Tape or glue residue can
also be easily removed by rubbing a small amount
of liquid dish soap over the adhesive with your
ngers. Wipe with warm water and dry.
• Do not use sharp instruments, rubbing alcohol,
ammable uids, or abrasive cleaners to remove
tape or glue. These products can damage the
surface of your refrigerator.
• Reinstall or adjust shelves as needed. Refrigerator
shelves are installed in the shipping position.
Reinstall shelves according to your individual
storage needs.
Choosing the Proper
Location
Water
Water supply must be easily connected for the
automatic icemaker.
NOTE
• The water pressure must be 20 - 120 psi or 138 -
827 kPa or 1.4 - 8.4 kgf/cm
installed in an area with low water pressure (below
20 psi or 138 kPa or 1.4 kgf/cm
booster pump to compensate for the low pressure.
Electricity
Use an individual, grounded outlet:115 Volts, 60 Hz,
AC, 15 Amps minimum.
WARNING
• Don't use existing holes unless they are in the
target area. Otherwise, the water supply and
drain hose may be damaged by being crushed
or kinked.
Flooring
To avoid noise and vibration, the unit must be
installed and leveled on a solidly constructed oor. If
required, adjust the leveling legs to compensate for
the unevenness of the oor.
NOTE
• Installing on carpeting, soft tile surfaces, a platform
or weakly supported structure is not recommended.
2
. If the refrigerator is
2
), you can install a
Ambient Temperature
Install this appliance in an area where the
temperature is between 55 °F (13 °C) and 110 °F
(43 °C).
If the temperature around the appliance is too low or
high, cooling ability may be adversely affected.
ENGLISH
Dimensions and Clearances
• Check the dimensions of the appliance and the installation path to ensure there is sufcient room to move the
refrigerator through doors or narrow openings.
• If an opening is too narrow to t the refrigerator through, remove the refrigerator doors. See Removing/
Assembling the Doors and Drawers in this manual.
• The installation location chosen for the refrigerator should allow space behind the unit for connections and
airow and space in front to open the doors and drawers.
• Too small of a distance from adjacent items may result in lowered freezing capability and increased electricity
consumption charges. Allow at least 24 inches (610 mm) in front of the refrigerator to open the doors, and at
least 2 inches (50.8 mm) between the back of the refrigerator and the wall.
B
13INSTALLATION
A
C
D
E
F
M
G
-ListLSXS26396SLSXC22396S
ADepth without handle
BWidth
CHeight to Top of Case
DHeight to Top of Hinge
EBack Clearance
FDepth without Door
G
KFront Clearance
MDepth With handle
Depth (Total with Door Open
90°)
33 2/5"
(848 mm)
35 9/10"
(912 mm)
68 9/10"
(1750 mm)
70 3/10"
(1785 mm)
2"
(50 mm)
28 7/10"
(730 mm)
50 3/5"
(1285 mm)
24"
(610 mm)
35 9/10"
(912 mm)
29 2/5"
747 mm)
35 9/10"
912 mm)
68 9/10"
(1750 mm)
70 3/10"
(1785 mm)
2"
(50 mm)
24 3/5"
(624mm)
46 1/2"
(1180 mm)
24"
(610 mm)
31 4/5"
(807 mm)
14 INSTALLATION
Removing/Assembling
Handles
• When moving the refrigerator through a narrow
opening, removing the doors is preferred.
• The appearance of the handles may vary from what
is shown.
WARNING
When assembling or disassembling the
refrigerator handles:
• Grasp the handle rmly to avoid dropping it.
• Do not swing the handle into nearby people or
animals.
• Make sure that the bracket hole of the handle
ts properly into the stopper bolt of the door.
Assemble the set screws to x the handle into
place.
• Make sure that there is not a gap between the
door and handle after assembling the handle.
Tools Needed
3/32 in. Allen wrench
1/8 in. Allen wrench
1/4 in. Allen wrench
Assembling the Refrigerator Handles
Assemble the mounting fasteners (1) at both ends
1
of the handle with a 1/4 in. Allen rench.
Place the handle on the door by tting the handle
2
footprints over the mounting fasteners and
tightening the set screws (2) with a 3/32 in. Allen
wrench.
Removing/Assembling the
Doors
If the entrance door is too narrow for the refrigerator
to pass through, remove the refrigerator doors and
move the refrigerator sideways through the doorway.
WARNING
Removing the Refrigerator Handles
Loosen the set screws (1) with a 3/32 in. Allen
1
wrench and remove the handle.
Loosen the mounting fasteners (2) that connect
2
to the refrigerator door and handle using a 1/4
in. Allen wrench, and remove the mounting
fasteners.
• Use two or more people to remove and install
the refrigerator doors.
• Disconnect the electrical supply to the
refrigerator before installing.
• Do not put hands, feet or other objects into the
air vents or bottom of the refrigerator.
• Be careful when handling the hinge and stopper.
• Remove food and bins before detaching the
doors and drawers.
• Do not hold the handle when removing or
replacing the doors and drawer as the handle
may come off.
Tools Needed
3/32 in. Allen wrench
1/8 in. Allen wrench
1/4 in. Allen wrench
15INSTALLATION
ENGLISH
(1)
(2)
Removing the Freezer Door (with
Water Line Connection)
Before removing freezer door, disconnect water
1
line connectors (one white tube, one blue tube).
• Do not remove freezer door if either the white or
blue tube is still connected.
• Use the support block shipped on the upper
shelf in the refrigerator to keep the front of
the refrigerator tilted up while removing the
connectors.
NOTE
Disassembling/Assembling the Water Lines
Collet
Tube
Lift the door to remove it from the lower hinge pin.
4
Be careful to pull the water lines from behind the
lower hinge pin.
Enough for the water feed tube to be completely
pulled out.
water feed tube
Lower Hinge
CAUTION
• When lifting the hinge free of the latch, be careful
that the door does not fall forward.
• Place the door, inside facing up, on a
nonscratching surface.Be careful not to damage
the water lines.
Removing the Refrigerator Door
Insert line
Clip
Loosen the hinge cover screws and remove the
2
(Correct)
hinge cover. Disconnect all wire harnesses.
Hinge Cover
Wire Harness
Upper Hinge
Rotate the hinge lever counterclockwise (1) and
3
lift the upper hinge (2).
Hinge Lever
Upper Hinge
Open the door and remove the top hinge cover
1
screw.
Use a at blade screwdriver to pry back the hooks
2
(not shown) of the hinge cover from the top of
the refrigerator cabinet. Remove the cover and
disconnect all wire harnesses.
Rotate the hinge lever (1) clockwise. Lift the top
3
hinge (2) free of the hinge lever latch.
Hinge Lever
Upper Hinge
(1)
(2)
16 INSTALLATION
Lift the door from the lower hinge pin.
4
Lower Hinge
CAUTION
• When lifting the hinge free of the latch, be careful
that the door does not fall forward.
• Place the door, inside facing up, on a
nonscratching surface.Be careful not to damage
the water lines.
NOTE
• Do not remove the grease on the surface of the
gasket or hinge.
• Do not remove the sensor assembly in the right
upper hinge cover.
Assembling the Freezer Door
Disassembling/Assembling the Water Lines
Collet
Tube
Insert line
Clip
Gently press the collet and insert the tube until
2
only one line shows on the tube.
CorrectIncorrect
NOTE
• Water hoses should be cut with a clean, straight
edge to avoid leaks.
(Correct)
Feed the water tubes through the lower hinge
1
pin and place the door onto the lower hinge pin.
Make sure the water hoses are behind the leg to
prevent damage.
NOTE
• Open the door and turn the hose toward the inside.
Water hoses should be behind the leg to prevent
damage.
CorrectIncorrect
Fit the top over the hinge lever latch and into
3
place. Rotate the lever clockwise to secure the
hinge.
Install the grounding screw and connect all the
4
wire harnesses.
Hook the tab on the door switch side of the cover,
5
under the edge of the wire opening in the cabinet
top. Position the cover into place. Insert and
tighten the cover screw.
Reconnect the water tubes by inserting the tubes
6
into the connectors. The tube is inserted correctly
when only one guide line is showing out of two.
17INSTALLATION
ENGLISH
Assembling the Refrigerator Door
Place the door onto the lower hinge pin.
1
Lower Hinge
Fit the upper hinge over the hinge lever latch and
2
into place. Rotate the lever counterclockwise to
secure the hinge.
(1)
(2)
Reconnect all wire harnesses. Hook the tab on
3
the switch side of the cover under the edge of the
wire opening in the cabinet top. Position the cover
and replace the screw.
Connecting the Water Line
Before Beginning
This water line installation is not covered by the
refrigerator warranty. Follow these instructions
carefully to minimize the risk of expensive water
damage.
If necessary, call a qualied plumber to correct water
hammer before installing the water supply line to
the refrigerator. Water banging in the pipes, or water
hammer in residential plumbing can cause damage
to refrigerator parts and lead to water leakage or
ooding.
• Turn the icemaker OFF if the refrigerator will be
used before the water line is connected.
• Do not install the icemaker tubing in areas where
the ambient temperatures fall below freezing.
WARNING
• Connect to a potable water supply only.
CAUTION
• To prevent burns and product damage, only
connect the refrigerator water line to a cold water
supply.
• Wear eye protection during installation toprevent
injury.
Water Pressure
You will need a cold water supply.
Water Pressure
models with water lter
where reverse osmosis
water ltration system is
connected to a cold water
supply
20–120 psi
(138 - 827 kPa)
40–60 psi minimum to
reverse osmosis system
(2.8 kgf/cm
2
cm
,or less than 2–3
seconds to ll a cup of 7
oz capacity)
2
– 4.2 kgf/
18 INSTALLATION
If the water pressure from the reverse osmosis
system is less than 20 psi or 138 kPa or 1.4 kgf/ cm
(takes more than 4 seconds to ll a cup of 7 oz or
198 cc capacity):
• Check to see if the sediment lter in the reverse
osmosis system is blocked. Replace the lter if
necessary.
• Allow the storage tank on the reverse osmosis
system to rell after heavy usage.
• If the water pressure remains low, call a licensed,
qualied plumber.
• All installations must be in accordance with local
plumbing code requirements.
Supplies Needed
• Copper or PEX Tubing, ¼ in. outer diameter, to
connect the refrigerator to the water supply. Be sure
both ends of the tubing are cut square. To determine
how much tubing you need, measure the distance
from the water valve on the back of the refrigerator
to the water supply pipe. Then, add 8 feet (2.4 m).
Be sure there is sufcient extra tubing (about 8 feet
[2.4 m] coiled into 3 turns of about 10 in. [25 cm]
diameter) to allow the refrigerator to move out from
the wall after installation.
• Power drill.
• ½ in. or adjustable wrench.
• Flat-blade and Phillips-head screwdrivers.
• Two ¼ in. outer diameter compression nuts and 2 ferrules (sleeves) to connect the copper tubing to
the shutoff valve and the refrigerator water valve.
2
• Shutoff valve to connect to the cold water line.
The shutoff valve should have a water inlet with a
minimum inside diameter of 5/32 in. at the point of
connection to the COLD WATER LINE. Saddle-type
shutoff valves are included in many water supply
kits. Before purchasing, make sure a saddle-type
valve complies with your local plumbing codes.
NOTE
• A self-piercing saddle type water valve should not
be used.
Water Line Installation Instructions
WARNING
Electric Shock Hazard:
• When using any electrical device (such as a
power drill) during installation, be sure the device
is battery-powered, double-insulated or grounded
in a manner that will prevent the hazard of
electric shock.
Install the shutoff valve on the nearest frequently
used drinking water line.
Shut off the main water supply.
1
Turn on the nearest faucet to relieve the pressure
on the line.
• If your existing copper water line has a ared tting
at the end, purchase an adapter (available at
plumbing supply stores) to connect the water line
to the refrigerator OR cut off the ared tting with a
tube cutter and then use a compression tting.
Choose the valve location.
2
Choose a location for the valve that is easily
accessible. It is best to connect into the side of
a vertical water pipe. When it is necessary to
connect into a horizontal water pipe, make the
connection to the top or side, rather than at the
bottom, to avoid drawing off any sediment from
the water pipe.
Loading...
+ 40 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.