LG LSW840B Owner’s Manual
Install Manual
Tilt Wall Mounting Bracket
Please read this manual carefully before operating your set and retain it
for future reference.
LSW840B
P/NO: MFL63640591 (1503-REV01)
www.lg.com
COMPONENT
Wall mount anchor
8 units
Guide spacer 4 units Guide spacer screw 4 units
Wall mount screw
8 units
(M8X44 mm)
Install manual
Set protection cushion
4 units
IMPORTANT SAFETY INSTRUCTIONS
- If you are a professional installer, please read this manual carefully before installing the product.
- If you are a professional installer, please give this manual to the user after installing the product and ensure that the user also
reads the manual carefully and retains it for future reference.
After reading the manual, please keep it handy for future reference.
The product should be installed by a qualified
professional specified by the retail store.
Product installation by non-qualified personnel is very
dangerous and may cause personal injury.
When moving or replacing the product after installation,
contact a qualified installer specified by the retail store.
Installation or movement of the product must be carried out by a
skilled professional. If an unqualified person moves and installs
the product, it may cause safety risks.
Be sure not to hang the power cable and signal cable on
the back of TV when installing the wall-mounted TV.
Damaged cables may result in fire, electric shock, or damage
to the product.
2
Warning
The product should be installed where its weight can be
fully supported.
If the product is installed on a weak surface, the product may
fall, causing injury.
Do not hang on this product, protect the product from
severe impacts after the installation.
The product may fall and cause injury.
Caution
Follow the instructions in this manual to product
properly.
If you do not follow these instructions, the product may be
installed incorrectly and cause serious injury or the product
may become damaged.
When installing the product, first check that the wall is
strong enough. Use the anchors and screws provided.
If you use anchors and screws that are not specified by the
manufacturer, they may not hold the weight of the product,
causing safety issues.
Do not clean the product with a wet towel, and do not
place a heater, or humidifier beneath it.
Moisture, steam or heat permeating into this product may
result in fire, electric shock or product damage.
Make sure that the power cord is removed from the
outlet before installing the product.
Otherwise, it may cause an electric shock or fire.
Be sure to use the accessory cable provided. Otherwise,
friction between the product and the wall may cause
damage to the connector.
BEFORE INSTALLATION
To install or adjust the height of the product, four or
more people are needed.
If you try to install or move the product alone, it may fall and
cause injury or the product may become damaged.
When drilling holes into the wall, make sure you use a
drill and drill bit with the specified diameter. Ensure that
you also follow the instructions regarding the depth of
the holes.
Otherwise, the product may be installed incorrectly and
cause safety issues.
Keep this product away from sprinklers, sensors, hightension wires and power sources. Do not install it in a
location where vibrations or impacts are likely to occur.
Wear safety gloves when installing the product. Do not
use your bare hands.
Otherwise, it may cause personal injury.
ENGLISH
* Do not use the product for purposes other than mounting a display on the wall.
* When installing/using the wall mount, be cautious of product damage and avoid accidents.
* Install the wall mount according to the installation manual.
* If you have not fully read and understood the installation manual, do not install the product and contact the dealer to have a
specialized installer install the product for you.
* Even if you are not a specialized installer, it is advantageous to have experience in mechanical or construction field in completely
understanding this manual and installing the product.
* Mount the product only on a concrete wall. LG Electronics Inc. is not liable for any accidents caused by mounting the product on walls
made of any other materials, including wood, plywood, and bricks.
* Install the product only on a vertical wall.
The manufacturer is not responsible for issue from installing the product on an angled wall or on the ceiling.
* Check that the accessories provided with the product are all included before installing. LG Electronics is not liable for any damage or
loss of accessories after the package has been opened.
* Keep the included accessories out of reach of babies or children as it can cause safety issues including suffocation from swallowing
the parts.
* Make sure screws are tight against the wall, but do not overtighten.
Applying excessive force to screws may damage to the wall, affect the product performance, or cause the product to become
damaged.
* Be careful not to install a TV that exceeds the weight restrictions of the wall mount.
* Be careful with the tools used during installation to prevent accidents or damage.
- Tools you will need - Phillips head + driver (manual or motorized) / 8 mm socket wrench / Level / Drill.
You may also need an Ø 4 mm drill bit for steel or an Ø 8 mm drill bit for concrete.
3
Loading...